Mirror/seaweedfs - seaweedfs - Gitea: Git with a cup of tea

Author	SHA1	Message	Date
chrislu	fb1529ccfe	Address review: fail explicitly if baseIV is empty for SSE-S3 chunk encryption If DestinationIV is not set when encrypting SSE-S3 chunks, the chunk would be created without SseMetadata, causing GetObject decryption to fail later. Now fails explicitly with a clear error message. Note: calculateIVWithOffset returns ([]byte, int) not ([]byte, error) - the int is a skip amount for intra-block alignment, not an error code.	3 days ago
chrislu	46865f4c54	Address review: improve comment to reflect full scope of chunk creation	3 days ago
chrislu	9efe29a61e	fmt	3 days ago
chrislu	2f443f6c89	Refactor: reuse function names instead of creating WithMetadata variants - Change ExecuteStreamingCopy to return (EncryptionSpec, error) directly - Remove ExecuteStreamingCopyWithMetadata wrapper - Change executeStreamingReencryptCopy to return (EncryptionSpec, error) - Remove executeStreamingReencryptCopyWithMetadata wrapper - Update callers to ignore encryption spec with _ where not needed	3 days ago
chrislu	5ffe8466b6	Address review: make SSE-S3 metadata serialization failures fatal errors - In executeEncryptCopy: return error instead of just logging if SerializeSSES3Metadata fails - In createChunkFromData: return error if chunk SSE-S3 metadata serialization fails This ensures objects/chunks are never created without proper encryption metadata, preventing unreadable/corrupted data.	3 days ago
chrislu	43fc623e3e	Fix SSE-S3 copy: preserve encryption metadata and set chunk SSE type Fixes GitHub #7562: Copying objects between encrypted buckets was failing. Root causes: 1. processMetadataBytes was re-adding SSE headers from source entry, undoing the encryption header filtering. Now uses dstEntry.Extended which is already filtered. 2. SSE-S3 streaming copy returned nil metadata. Now properly generates and returns SSE-S3 destination metadata (SeaweedFSSSES3Key, AES256 header) via ExecuteStreamingCopyWithMetadata. 3. Chunks created during streaming copy didn't have SseType set. Now sets SseType and per-chunk SseMetadata with chunk-specific IVs for SSE-S3, enabling proper decryption on GetObject.	3 days ago
Chris Lu	f6a604c538	S3: Fix encrypted file copy with multiple chunks (#7530 ) (#7546 ) * S3: Fix encrypted file copy with multiple chunks (#7530) When copying encrypted files with multiple chunks (encrypted volumes via -filer.encryptVolumeData), the copied file could not be read. This was caused by the chunk copy operation not preserving the IsCompressed flag, which led to improper handling of compressed/encrypted data during upload. The fix: 1. Modified uploadChunkData to accept an isCompressed parameter 2. Updated copySingleChunk to pass the source chunk's IsCompressed flag 3. Updated copySingleChunkForRange for partial copy operations 4. Updated all other callers to pass the appropriate compression flag 5. Added comprehensive tests for encrypted volume copy scenarios This ensures that when copying chunks: - The IsCompressed flag from the source chunk is passed to the upload - Compressed data is marked as compressed, preventing double-compression - Already-encrypted data is not re-encrypted (Cipher: false is correct) - All chunk metadata (CipherKey, IsCompressed, ETag) is preserved Tests added: - TestCreateDestinationChunkPreservesEncryption: Verifies metadata preservation - TestCopySingleChunkWithEncryption: Tests various encryption/compression scenarios - TestCopyChunksPreservesMetadata: Tests multi-chunk metadata preservation - TestEncryptedVolumeScenario: Documents and tests the exact issue #7530 scenario Fixes #7530 * Address PR review feedback: simplify tests and improve clarity - Removed TestUploadChunkDataCompressionFlag (panic-based test) - Removed TestCopySingleChunkWithEncryption (duplicate coverage) - Removed TestCopyChunksPreservesMetadata (duplicate coverage) - Added ETag verification to TestEncryptedVolumeCopyScenario - Renamed to TestEncryptedVolumeCopyScenario for better clarity - All test coverage now in TestCreateDestinationChunkPreservesEncryption and TestEncryptedVolumeCopyScenario which focus on the actual behavior	1 week ago
Chris Lu	0abf70061b	S3 API: Fix SSE-S3 decryption on object download (#7366 ) * S3 API: Fix SSE-S3 decryption on object download Fixes #7363 This commit adds missing SSE-S3 decryption support when downloading objects from SSE-S3 encrypted buckets. Previously, SSE-S3 encrypted objects were returned in their encrypted form, causing data corruption and hash mismatches. Changes: - Updated detectPrimarySSEType() to detect SSE-S3 encrypted objects by examining chunk metadata and distinguishing SSE-S3 from SSE-KMS - Added SSE-S3 handling in handleSSEResponse() to route to new handler - Implemented handleSSES3Response() for both single-part and multipart SSE-S3 encrypted objects with proper decryption - Implemented createMultipartSSES3DecryptedReader() for multipart objects with per-chunk decryption using stored IVs - Updated addSSEHeadersToResponse() to include SSE-S3 response headers The fix follows the existing SSE-C and SSE-KMS patterns, using the envelope encryption architecture where each object's DEK is encrypted with the KEK stored in the filer. * Add comprehensive tests for SSE-S3 decryption - TestSSES3EncryptionDecryption: basic encryption/decryption - TestSSES3IsRequestInternal: request detection - TestSSES3MetadataSerialization: metadata serialization/deserialization - TestDetectPrimarySSETypeS3: SSE type detection for various scenarios - TestAddSSES3HeadersToResponse: response header validation - TestSSES3EncryptionWithBaseIV: multipart encryption with base IV - TestSSES3WrongKeyDecryption: wrong key error handling - TestSSES3KeyGeneration: key generation and uniqueness - TestSSES3VariousSizes: encryption/decryption with various data sizes - TestSSES3ResponseHeaders: response header correctness - TestSSES3IsEncryptedInternal: metadata-based encryption detection - TestSSES3InvalidMetadataDeserialization: error handling for invalid metadata - TestGetSSES3Headers: header generation - TestProcessSSES3Request: request processing - TestGetSSES3KeyFromMetadata: key extraction from metadata - TestSSES3EnvelopeEncryption: envelope encryption correctness - TestValidateSSES3Key: key validation All tests pass successfully, providing comprehensive coverage for the SSE-S3 decryption fix. * Address PR review comments 1. Fix resource leak in createMultipartSSES3DecryptedReader: - Wrap decrypted reader with closer to properly release resources - Ensure underlying chunkReader is closed when done 2. Handle mixed-encryption objects correctly: - Check chunk encryption type before attempting decryption - Pass through non-SSE-S3 chunks unmodified - Log encryption type for debugging 3. Improve SSE type detection logic: - Add explicit case for aws:kms algorithm - Handle unknown algorithms gracefully - Better documentation for tie-breaking precedence 4. Document tie-breaking behavior: - Clarify that mixed encryption indicates potential corruption - Explicit precedence order: SSE-C > SSE-KMS > SSE-S3 These changes address high-severity resource management issues and improve robustness when handling edge cases and mixed-encryption scenarios. * Fix IV retrieval for small/inline SSE-S3 encrypted files Critical bug fix: The previous implementation only looked for the IV in chunk metadata, which would fail for small files stored inline (without chunks). Changes: - Check object-level metadata (sseS3Key.IV) first for inline files - Fallback to first chunk metadata only if object-level IV not found - Improved error message to indicate both locations were checked This ensures small SSE-S3 encrypted files (stored inline in entry.Content) can be properly decrypted, as their IV is stored in the object-level SeaweedFSSSES3Key metadata rather than in chunk metadata. Fixes the high-severity issue identified in PR review. * Clean up unused SSE metadata helper functions Remove legacy SSE metadata helper functions that were never fully implemented or used: Removed unused functions: - StoreSSECMetadata() / GetSSECMetadata() - StoreSSEKMSMetadata() / GetSSEKMSMetadata() - StoreSSES3Metadata() / GetSSES3Metadata() - IsSSEEncrypted() - GetSSEAlgorithm() Removed unused constants: - MetaSSEAlgorithm - MetaSSECKeyMD5 - MetaSSEKMSKeyID - MetaSSEKMSEncryptedKey - MetaSSEKMSContext - MetaSSES3KeyID These functions were from an earlier design where IV and other metadata would be stored in common entry.Extended keys. The actual implementations use type-specific serialization: - SSE-C: Uses StoreIVInMetadata()/GetIVFromMetadata() directly for IV - SSE-KMS: Serializes entire SSEKMSKey structure as JSON (includes IV) - SSE-S3: Serializes entire SSES3Key structure as JSON (includes IV) This follows Option A: SSE-S3 uses envelope encryption pattern like SSE-KMS, where IV is stored within the serialized key metadata rather than in a separate metadata field. Kept functions still in use: - StoreIVInMetadata() - Used by SSE-C - GetIVFromMetadata() - Used by SSE-C and streaming copy - MetaSSEIV constant - Used by SSE-C All tests pass after cleanup. * Rename SSE metadata functions to clarify SSE-C specific usage Renamed functions and constants to explicitly indicate they are SSE-C specific, improving code clarity: Renamed: - MetaSSEIV → MetaSSECIV - StoreIVInMetadata() → StoreSSECIVInMetadata() - GetIVFromMetadata() → GetSSECIVFromMetadata() Updated all usages across: - s3api_key_rotation.go - s3api_streaming_copy.go - s3api_object_handlers_copy.go - s3_sse_copy_test.go - s3_sse_test_utils_test.go Rationale: These functions are exclusively used by SSE-C for storing/retrieving the IV in entry.Extended metadata. SSE-KMS and SSE-S3 use different approaches (IV stored in serialized key structures), so the generic names were misleading. The new names make it clear these are part of the SSE-C implementation. All tests pass. * Add integration tests for SSE-S3 end-to-end encryption/decryption These integration tests cover the complete encrypt->store->decrypt cycle that was missing from the original test suite. They would have caught the IV retrieval bug for inline files. Tests added: - TestSSES3EndToEndSmallFile: Tests inline files (10, 50, 256 bytes) * Specifically tests the critical IV retrieval path for inline files * This test explicitly checks the bug we fixed where inline files couldn't retrieve their IV from object-level metadata - TestSSES3EndToEndChunkedFile: Tests multipart encrypted files * Verifies per-chunk metadata serialization/deserialization * Tests that each chunk can be independently decrypted with its own IV - TestSSES3EndToEndWithDetectPrimaryType: Tests type detection * Verifies inline vs chunked SSE-S3 detection * Ensures SSE-S3 is distinguished from SSE-KMS Note: Full HTTP handler tests (PUT -> GET through actual handlers) would require a complete mock server with filer connections, which is complex. These tests focus on the critical decrypt path and data flow. Why these tests are important: - Unit tests alone don't catch integration issues - The IV retrieval bug existed because there was no end-to-end test - These tests simulate the actual storage/retrieval flow - They verify the complete encryption architecture works correctly All tests pass. * Fix TestValidateSSES3Key expectations to match actual implementation The ValidateSSES3Key function only validates that the key struct is not nil, but doesn't validate the Key field contents or size. The test was expecting validation that doesn't exist. Updated test cases: - Nil key struct → should error (correct) - Valid key → should not error (correct) - Invalid key size → should not error (validation doesn't check this) - Nil key bytes → should not error (validation doesn't check this) Added comments to clarify what the current validation actually checks. This matches the behavior of ValidateSSEKMSKey and ValidateSSECKey which also only check for nil struct, not field contents. All SSE tests now pass. * Improve ValidateSSES3Key to properly validate key contents Enhanced the validation function from only checking nil struct to comprehensive validation of all key fields: Validations added: 1. Key bytes not nil 2. Key size exactly 32 bytes (SSES3KeySize) 3. Algorithm must be "AES256" (SSES3Algorithm) 4. Key ID must not be empty 5. IV length must be 16 bytes if set (optional - set during encryption) Test improvements (10 test cases): - Nil key struct - Valid key without IV - Valid key with IV - Invalid key size (too small) - Invalid key size (too large) - Nil key bytes - Empty key ID - Invalid algorithm - Invalid IV length - Empty IV (allowed - set during encryption) This matches the robustness of SSE-C and SSE-KMS validation and will catch configuration errors early rather than failing during encryption/decryption. All SSE tests pass. * Replace custom string helper functions with strings.Contains Address Gemini Code Assist review feedback: - Remove custom contains() and findSubstring() helper functions - Use standard library strings.Contains() instead - Add strings import This makes the code more idiomatic and easier to maintain by using the standard library instead of reimplementing functionality. Changes: - Added "strings" to imports - Replaced contains(err.Error(), tc.errorMsg) with strings.Contains(err.Error(), tc.errorMsg) - Removed 15 lines of custom helper code All tests pass. * filer fix reading and writing SSE-S3 headers * filter out seaweedfs internal headers * Update weed/s3api/s3api_object_handlers.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update weed/s3api/s3_validation_utils.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update s3api_streaming_copy.go * remove fallback * remove redundant check * refactor * remove extra object fetching * in case object is not found * Correct Version Entry for SSE Routing * Proper Error Handling for SSE Entry Fetching * Eliminated All Redundant Lookups * Removed brittle “exactly 5 successes/failures” assertions. Added invariant checks total recorded attempts equals request count, successes never exceed capacity, failures cover remaining attempts, final AvailableSpace matches capacity - successes. * refactor * fix test * Fixed Broken Fallback Logic * refactor * Better Error for Encryption Type Mismatch * refactor --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	1 month ago
Chris Lu	f7bd75ef3b	S3: Avoid in-memory map concurrent writes in SSE-S3 key manager (#7358 ) * Fix concurrent map writes in SSE-S3 key manager This commit fixes issue #7352 where parallel uploads to SSE-S3 enabled buckets were causing 'fatal error: concurrent map writes' crashes. The SSES3KeyManager struct had an unsynchronized map that was being accessed from multiple goroutines during concurrent PUT operations. Changes: - Added sync.RWMutex to SSES3KeyManager struct - Protected StoreKey() with write lock - Protected GetKey() with read lock - Updated GetOrCreateKey() with proper read/write locking pattern including double-check to prevent race conditions All existing SSE tests pass successfully. Fixes #7352 * Improve SSE-S3 key manager with envelope encryption Replace in-memory key storage with envelope encryption using a super key (KEK). Instead of storing DEKs in a map, the key manager now: - Uses a randomly generated 256-bit super key (KEK) - Encrypts each DEK with the super key using AES-GCM - Stores the encrypted DEK in object metadata - Decrypts the DEK on-demand when reading objects Benefits: - Eliminates unbounded memory growth from caching DEKs - Provides better security with authenticated encryption (AES-GCM) - Follows envelope encryption best practices (similar to AWS KMS) - No need for mutex-protected map lookups on reads - Each object's encrypted DEK is self-contained in its metadata This approach matches the design pattern used in the local KMS provider and is more suitable for production use. * Persist SSE-S3 KEK in filer for multi-server support Store the SSE-S3 super key (KEK) in the filer at /.seaweedfs/s3/kek instead of generating it per-server. This ensures: 1. Multi-server consistency: All S3 API servers use the same KEK 2. Persistence across restarts: KEK survives server restarts 3. Centralized management: KEK stored in filer, accessible to all servers 4. Automatic initialization: KEK is created on first startup if it doesn't exist The KEK is: - Stored as hex-encoded bytes in filer - Protected with file mode 0600 (read/write for owner only) - Located in /.seaweedfs/s3/ directory (mode 0700) - Loaded on S3 API server startup - Reused across all S3 API server instances This matches the architecture of centralized configuration in SeaweedFS and enables proper SSE-S3 support in multi-server deployments. * Change KEK storage location to /etc/s3/kek Move SSE-S3 KEK from /.seaweedfs/s3/kek to /etc/s3/kek for better organization and consistency with other SeaweedFS configuration files. The /etc directory is the standard location for configuration files in SeaweedFS. * use global sse-se key manager when copying * Update volume_growth_reservation_test.go * Rename KEK file to sse_kek for clarity Changed /etc/s3/kek to /etc/s3/sse_kek to make it clear this key is specifically for SSE-S3 encryption, not for other KMS purposes. This improves clarity and avoids potential confusion with the separate KMS provider system used for SSE-KMS. * Use constants for SSE-S3 KEK directory and file name Refactored to use named constants instead of string literals: - SSES3KEKDirectory = "/etc/s3" - SSES3KEKParentDir = "/etc" - SSES3KEKDirName = "s3" - SSES3KEKFileName = "sse_kek" This improves maintainability and makes it easier to change the storage location if needed in the future. * Address PR review: Improve error handling and robustness Addresses review comments from https://github.com/seaweedfs/seaweedfs/pull/7358#pullrequestreview-3367476264 Critical fixes: 1. Distinguish between 'not found' and other errors when loading KEK - Only generate new KEK if ErrNotFound - Fail fast on connectivity/permission errors to prevent data loss - Prevents creating new KEK that would make existing data undecryptable 2. Make SSE-S3 initialization failure fatal - Return error instead of warning when initialization fails - Prevents server from running in broken state 3. Improve directory creation error handling - Only ignore 'file exists' errors - Fail on permission/connectivity errors These changes ensure the SSE-S3 key manager is robust against transient errors and prevents accidental data loss. * Fix KEK path conflict with /etc/s3 file Changed KEK storage from /etc/s3/sse_kek to /etc/seaweedfs/s3_sse_kek to avoid conflict with the circuit breaker config at /etc/s3. The /etc/s3 path is used by CircuitBreakerConfigDir and may exist as a file (circuit_breaker.json), causing the error: 'CreateEntry /etc/s3/sse_kek: /etc/s3 should be a directory' New KEK location: /etc/seaweedfs/s3_sse_kek This uses the seaweedfs subdirectory which is more appropriate for internal SeaweedFS configuration files. Fixes startup failure when /etc/s3 exists as a file. * Revert KEK path back to /etc/s3/sse_kek Changed back from /etc/seaweedfs/s3_sse_kek to /etc/s3/sse_kek as requested. The /etc/s3 directory will be created properly when it doesn't exist. * Fix directory creation with proper ModeDir flag Set FileMode to uint32(0755 \| os.ModeDir) when creating /etc/s3 directory to ensure it's created as a directory, not a file. Without the os.ModeDir flag, the entry was being created as a file, which caused the error 'CreateEntry: /etc/s3 is a file' when trying to create the KEK file inside it. Uses 0755 permissions (rwxr-xr-x) for the directory and adds os import for os.ModeDir constant.	1 month ago
Chris Lu	b7b73016dd	S3 API: Add SSE-KMS (#7144 ) * implement sse-c * fix Content-Range * adding tests * Update s3_sse_c_test.go * copy sse-c objects * adding tests * refactor * multi reader * remove extra write header call * refactor * SSE-C encrypted objects do not support HTTP Range requests * robust * fix server starts * Update Makefile * Update Makefile * ci: remove SSE-C integration tests and workflows; delete test/s3/encryption/ * s3: SSE-C MD5 must be base64 (case-sensitive); fix validation, comparisons, metadata storage; update tests * minor * base64 * Update SSE-C_IMPLEMENTATION.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update weed/s3api/s3api_object_handlers.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update SSE-C_IMPLEMENTATION.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * address comments * fix test * fix compilation * Bucket Default Encryption To complete the SSE-KMS implementation for production use: Add AWS KMS Provider - Implement weed/kms/aws/aws_kms.go using AWS SDK Integrate with S3 Handlers - Update PUT/GET object handlers to use SSE-KMS Add Multipart Upload Support - Extend SSE-KMS to multipart uploads Configuration Integration - Add KMS configuration to filer.toml Documentation - Update SeaweedFS wiki with SSE-KMS usage examples * store bucket sse config in proto * add more tests * Update SSE-C_IMPLEMENTATION.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Fix rebase errors and restore structured BucketMetadata API Merge Conflict Fixes: - Fixed merge conflicts in header.go (SSE-C and SSE-KMS headers) - Fixed merge conflicts in s3api_errors.go (SSE-C and SSE-KMS error codes) - Fixed merge conflicts in s3_sse_c.go (copy strategy constants) - Fixed merge conflicts in s3api_object_handlers_copy.go (copy strategy usage) API Restoration: - Restored BucketMetadata struct with Tags, CORS, and Encryption fields - Restored structured API functions: GetBucketMetadata, SetBucketMetadata, UpdateBucketMetadata - Restored helper functions: UpdateBucketTags, UpdateBucketCORS, UpdateBucketEncryption - Restored clear functions: ClearBucketTags, ClearBucketCORS, ClearBucketEncryption Handler Updates: - Updated GetBucketTaggingHandler to use GetBucketMetadata() directly - Updated PutBucketTaggingHandler to use UpdateBucketTags() - Updated DeleteBucketTaggingHandler to use ClearBucketTags() - Updated CORS handlers to use UpdateBucketCORS() and ClearBucketCORS() - Updated loadCORSFromBucketContent to use GetBucketMetadata() Internal Function Updates: - Updated getBucketMetadata() to return BucketMetadata struct - Updated setBucketMetadata() to accept BucketMetadata struct - Updated getBucketEncryptionMetadata() to use GetBucketMetadata() - Updated setBucketEncryptionMetadata() to use SetBucketMetadata() Benefits: - Resolved all rebase conflicts while preserving both SSE-C and SSE-KMS functionality - Maintained consistent structured API throughout the codebase - Eliminated intermediate wrapper functions for cleaner code - Proper error handling with better granularity - All tests passing and build successful The bucket metadata system now uses a unified, type-safe, structured API that supports tags, CORS, and encryption configuration consistently. * Fix updateEncryptionConfiguration for first-time bucket encryption setup - Change getBucketEncryptionMetadata to getBucketMetadata to avoid failures when no encryption config exists - Change setBucketEncryptionMetadata to setBucketMetadataWithEncryption for consistency - This fixes the critical issue where bucket encryption configuration failed for buckets without existing encryption Fixes: https://github.com/seaweedfs/seaweedfs/pull/7144#discussion_r2285669572 * Fix rebase conflicts and maintain structured BucketMetadata API Resolved Conflicts: - Fixed merge conflicts in s3api_bucket_config.go between structured API (HEAD) and old intermediate functions - Kept modern structured API approach: UpdateBucketCORS, ClearBucketCORS, UpdateBucketEncryption - Removed old intermediate functions: setBucketTags, deleteBucketTags, setBucketMetadataWithEncryption API Consistency Maintained: - updateCORSConfiguration: Uses UpdateBucketCORS() directly - removeCORSConfiguration: Uses ClearBucketCORS() directly - updateEncryptionConfiguration: Uses UpdateBucketEncryption() directly - All structured API functions preserved: GetBucketMetadata, SetBucketMetadata, UpdateBucketMetadata Benefits: - Maintains clean separation between API layers - Preserves atomic metadata updates with proper error handling - Eliminates function indirection for better performance - Consistent API usage pattern throughout codebase - All tests passing and build successful The bucket metadata system continues to use the unified, type-safe, structured API that properly handles tags, CORS, and encryption configuration without any intermediate wrapper functions. * Fix complex rebase conflicts and maintain clean structured BucketMetadata API Resolved Complex Conflicts: - Fixed merge conflicts between modern structured API (HEAD) and mixed approach - Removed duplicate function declarations that caused compilation errors - Consistently chose structured API approach over intermediate functions Fixed Functions: - BucketMetadata struct: Maintained clean field alignment - loadCORSFromBucketContent: Uses GetBucketMetadata() directly - updateCORSConfiguration: Uses UpdateBucketCORS() directly - removeCORSConfiguration: Uses ClearBucketCORS() directly - getBucketMetadata: Returns BucketMetadata struct consistently - setBucketMetadata: Accepts BucketMetadata struct consistently Removed Duplicates: - Eliminated duplicate GetBucketMetadata implementations - Eliminated duplicate SetBucketMetadata implementations - Eliminated duplicate UpdateBucketMetadata implementations - Eliminated duplicate helper functions (UpdateBucketTags, etc.) API Consistency Achieved: - Single, unified BucketMetadata struct for all operations - Atomic updates through UpdateBucketMetadata with function callbacks - Type-safe operations with proper error handling - No intermediate wrapper functions cluttering the API Benefits: - Clean, maintainable codebase with no function duplication - Consistent structured API usage throughout all bucket operations - Proper error handling and type safety - Build successful and all tests passing The bucket metadata system now has a completely clean, structured API without any conflicts, duplicates, or inconsistencies. * Update remaining functions to use new structured BucketMetadata APIs directly Updated functions to follow the pattern established in bucket config: - getEncryptionConfiguration() -> Uses GetBucketMetadata() directly - removeEncryptionConfiguration() -> Uses ClearBucketEncryption() directly Benefits: - Consistent API usage pattern across all bucket metadata operations - Simpler, more readable code that leverages the structured API - Eliminates calls to intermediate legacy functions - Better error handling and logging consistency - All tests pass with improved functionality This completes the transition to using the new structured BucketMetadata API throughout the entire bucket configuration and encryption subsystem. * Fix GitHub PR #7144 code review comments Address all code review comments from Gemini Code Assist bot: 1. High Priority - SSE-KMS Key Validation: Fixed ValidateSSEKMSKey to allow empty KMS key ID - Empty key ID now indicates use of default KMS key (consistent with AWS behavior) - Updated ParseSSEKMSHeaders to call validation after parsing - Enhanced isValidKMSKeyID to reject keys with spaces and invalid characters 2. Medium Priority - KMS Registry Error Handling: Improved error collection in CloseAll - Now collects all provider close errors instead of only returning the last one - Uses proper error formatting with %w verb for error wrapping - Returns single error for one failure, combined message for multiple failures 3. Medium Priority - Local KMS Aliases Consistency: Fixed alias handling in CreateKey - Now updates the aliases slice in-place to maintain consistency - Ensures both p.keys map and key.Aliases slice use the same prefixed format All changes maintain backward compatibility and improve error handling robustness. Tests updated and passing for all scenarios including edge cases. * Use errors.Join for KMS registry error handling Replace manual string building with the more idiomatic errors.Join function: - Removed manual error message concatenation with strings.Builder - Simplified error handling logic by using errors.Join(allErrors...) - Removed unnecessary string import - Added errors import for errors.Join This approach is cleaner, more idiomatic, and automatically handles: - Returning nil for empty error slice - Returning single error for one-element slice - Properly formatting multiple errors with newlines The errors.Join function was introduced in Go 1.20 and is the recommended way to combine multiple errors. * Update registry.go * Fix GitHub PR #7144 latest review comments Address all new code review comments from Gemini Code Assist bot: 1. High Priority - SSE-KMS Detection Logic: Tightened IsSSEKMSEncrypted function - Now relies only on the canonical x-amz-server-side-encryption header - Removed redundant check for x-amz-encrypted-data-key metadata - Prevents misinterpretation of objects with inconsistent metadata state - Updated test case to reflect correct behavior (encrypted data key only = false) 2. Medium Priority - UUID Validation: Enhanced KMS key ID validation - Replaced simplistic length/hyphen count check with proper regex validation - Added regexp import for robust UUID format checking - Regex pattern: ^[a-fA-F0-9]{8}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{12}$ - Prevents invalid formats like '------------------------------------' from passing 3. Medium Priority - Alias Mutation Fix: Avoided input slice modification - Changed CreateKey to not mutate the input aliases slice in-place - Uses local variable for modified alias to prevent side effects - Maintains backward compatibility while being safer for callers All changes improve code robustness and follow AWS S3 standards more closely. Tests updated and passing for all scenarios including edge cases. * Fix failing SSE tests Address two failing test cases: 1. TestSSEHeaderConflicts: Fixed SSE-C and SSE-KMS mutual exclusion - Modified IsSSECRequest to return false if SSE-KMS headers are present - Modified IsSSEKMSRequest to return false if SSE-C headers are present - This prevents both detection functions from returning true simultaneously - Aligns with AWS S3 behavior where SSE-C and SSE-KMS are mutually exclusive 2. TestBucketEncryptionEdgeCases: Fixed XML namespace validation - Added namespace validation in encryptionConfigFromXMLBytes function - Now rejects XML with invalid namespaces (only allows empty or AWS standard namespace) - Validates XMLName.Space to ensure proper XML structure - Prevents acceptance of malformed XML with incorrect namespaces Both fixes improve compliance with AWS S3 standards and prevent invalid configurations from being accepted. All SSE and bucket encryption tests now pass successfully. * Fix GitHub PR #7144 latest review comments Address two new code review comments from Gemini Code Assist bot: 1. High Priority - Race Condition in UpdateBucketMetadata: Fixed thread safety issue - Added per-bucket locking mechanism to prevent race conditions - Introduced bucketMetadataLocks map with RWMutex for each bucket - Added getBucketMetadataLock helper with double-checked locking pattern - UpdateBucketMetadata now uses bucket-specific locks to serialize metadata updates - Prevents last-writer-wins scenarios when concurrent requests update different metadata parts 2. Medium Priority - KMS Key ARN Validation: Improved robustness of ARN validation - Enhanced isValidKMSKeyID function to strictly validate ARN structure - Changed from 'len(parts) >= 6' to 'len(parts) != 6' for exact part count - Added proper resource validation for key/ and alias/ prefixes - Prevents malformed ARNs with incorrect structure from being accepted - Now validates: arn:aws:kms:region:account:key/keyid or arn:aws:kms:region:account:alias/aliasname Both fixes improve system reliability and prevent edge cases that could cause data corruption or security issues. All existing tests continue to pass. * format * address comments * Configuration Adapter * Regex Optimization * Caching Integration * add negative cache for non-existent buckets * remove bucketMetadataLocks * address comments * address comments * copying objects with sse-kms * copying strategy * store IV in entry metadata * implement compression reader * extract json map as sse kms context * bucket key * comments * rotate sse chunks * KMS Data Keys use AES-GCM + nonce * add comments * Update weed/s3api/s3_sse_kms.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update s3api_object_handlers_put.go * get IV from response header * set sse headers * Update s3api_object_handlers.go * deterministic JSON marshaling * store iv in entry metadata * address comments * not used * store iv in destination metadata ensures that SSE-C copy operations with re-encryption (decrypt/re-encrypt scenario) now properly store the destination encryption metadata * add todo * address comments * SSE-S3 Deserialization * add BucketKMSCache to BucketConfig * fix test compilation * already not empty * use constants * fix: critical metadata (encrypted data keys, encryption context, etc.) was never stored during PUT/copy operations * address comments * fix tests * Fix SSE-KMS Copy Re-encryption * Cache now persists across requests * fix test * iv in metadata only * SSE-KMS copy operations should follow the same pattern as SSE-C * fix size overhead calculation * Filer-Side SSE Metadata Processing * SSE Integration Tests * fix tests * clean up * Update s3_sse_multipart_test.go * add s3 sse tests * unused * add logs * Update Makefile * Update Makefile * s3 health check * The tests were failing because they tried to run both SSE-C and SSE-KMS tests * Update weed/s3api/s3_sse_c.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update Makefile * add back * Update Makefile * address comments * fix tests * Update s3-sse-tests.yml * Update s3-sse-tests.yml * fix sse-kms for PUT operation * IV * Update auth_credentials.go * fix multipart with kms * constants * multipart sse kms Modified handleSSEKMSResponse to detect multipart SSE-KMS objects Added createMultipartSSEKMSDecryptedReader to handle each chunk independently Each chunk now gets its own decrypted reader before combining into the final stream * validate key id * add SSEType * permissive kms key format * Update s3_sse_kms_test.go * format * assert equal * uploading SSE-KMS metadata per chunk * persist sse type and metadata * avoid re-chunk multipart uploads * decryption process to use stored PartOffset values * constants * sse-c multipart upload * Unified Multipart SSE Copy * purge * fix fatalf * avoid io.MultiReader which does not close underlying readers * unified cross-encryption * fix Single-object SSE-C * adjust constants * range read sse files * remove debug logs --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	4 months ago