* Lazy Versioning Check, Conditional SSE Entry Fetch, HEAD Request Optimization
* revert
Reverted the conditional versioning check to always check versioning status
Reverted the conditional SSE entry fetch to always fetch entry metadata
Reverted the conditional versioning check to always check versioning status
Reverted the conditional SSE entry fetch to always fetch entry metadata
* Lazy Entry Fetch for SSE, Skip Conditional Header Check
* SSE-KMS headers are present, this is not an SSE-C request (mutually exclusive)
* SSE-C is mutually exclusive with SSE-S3 and SSE-KMS
* refactor
* Removed Premature Mutual Exclusivity Check
* check for the presence of the X-Amz-Server-Side-Encryption header
* not used
* fmt
Added end-to-end logging to track SSE chunk metadata lifecycle:
**During Multipart Completion (filer_multipart.go)**:
1. Log finalParts chunks BEFORE mkFile - shows SseType and metadata
2. Log versionEntry.Chunks INSIDE mkFile callback - shows if mkFile preserves SSE info
3. Log success after mkFile completes
**During GET Retrieval (s3api_object_handlers.go)**:
1. Log retrieved entry chunks - shows SseType and metadata after retrieval
2. Log detected SSE type result
This will reveal at which point SSE chunk metadata is lost:
- If finalParts have SSE metadata but versionEntry.Chunks don't → mkFile bug
- If versionEntry.Chunks have SSE metadata but retrieved chunks don't → storage/retrieval bug
- If chunks never have SSE metadata → multipart completion SSE processing bug
Expected to show chunks with SseType=NONE during retrieval even though
they were created with proper SseType during multipart completion.
Added comprehensive logging to diagnose why TestSSEMultipartUploadIntegration fails:
detectPrimarySSEType now logs:
1. Total chunk count and extended header count
2. All extended headers with 'sse'/'SSE'/'encryption' in the name
3. For each chunk: index, SseType, and whether it has metadata
4. Final SSE type counts (SSE-C, SSE-KMS, SSE-S3)
This will reveal if:
- Chunks are missing SSE metadata after multipart completion
- Extended headers are copied correctly from first part
- The SSE detection logic is working correctly
Expected to show if chunks have SseType=0 (none) or proper SSE types set.
Critical fix for SSE (Server-Side Encryption) test failures:
1. **JWT Authentication Bug** (Root Cause):
- Changed from GenJwtForFilerServer to GenJwtForVolumeServer
- S3 API now uses correct JWT when directly reading from volume servers
- Matches filer's authentication pattern for direct volume access
- Fixes 'unexpected EOF' and 500 errors in SSE tests
2. **Streaming Error Handling**:
- Added error propagation in getEncryptedStreamFromVolumes goroutine
- Use CloseWithError() to properly communicate stream failures
- Added debug logging for streaming errors
3. **Response Header Timing**:
- Removed premature WriteHeader(http.StatusOK) call
- Let Go's http package write status automatically on first write
- Prevents header lock when errors occur during streaming
4. **Enhanced SSE Decryption Debugging**:
- Added IV/Key validation and logging for SSE-C, SSE-KMS, SSE-S3
- Better error messages for missing or invalid encryption metadata
- Added glog.V(2) debugging for decryption setup
This fixes SSE integration test failures where encrypted objects
could not be retrieved due to volume server authentication failures.
The JWT bug was causing volume servers to reject requests, resulting
in truncated/empty streams (EOF) or internal errors.
Reverted the conditional versioning check to always check versioning status
Reverted the conditional SSE entry fetch to always fetch entry metadata
Reverted the conditional versioning check to always check versioning status
Reverted the conditional SSE entry fetch to always fetch entry metadata
* do delete expired entries on s3 list request
https://github.com/seaweedfs/seaweedfs/issues/6837
* disable delete expires s3 entry in filer
* pass opt allowDeleteObjectsByTTL to all servers
* delete on get and head
* add lifecycle expiration s3 tests
* fix opt allowDeleteObjectsByTTL for server
* fix test lifecycle expiration
* fix IsExpired
* fix locationPrefix for updateEntriesTTL
* fix s3tests
* resolv coderabbitai
* GetS3ExpireTime on filer
* go mod
* clear TtlSeconds for volume
* move s3 delete expired entry to filer
* filer delete meta and data
* del unusing func removeExpiredObject
* test s3 put
* test s3 put multipart
* allowDeleteObjectsByTTL by default
* fix pipline tests
* rm dublicate SeaweedFSExpiresS3
* revert expiration tests
* fix updateTTL
* rm log
* resolv comment
* fix delete version object
* fix S3Versioning
* fix delete on FindEntry
* fix delete chunks
* fix sqlite not support concurrent writes/reads
* move deletion out of listing transaction; delete entries and empty folders
* Revert "fix sqlite not support concurrent writes/reads"
This reverts commit 5d5da14e0e.
* clearer handling on recursive empty directory deletion
* handle listing errors
* strut copying
* reuse code to delete empty folders
* use iterative approach with a queue to avoid recursive WithFilerClient calls
* stop a gRPC stream from the client-side callback is to return a specific error, e.g., io.EOF
* still issue UpdateEntry when the flag must be added
* errors join
* join path
* cleaner
* add context, sort directories by depth (deepest first) to avoid redundant checks
* batched operation, refactoring
* prevent deleting bucket
* constant
* reuse code
* more logging
* refactoring
* s3 TTL time
* Safety check
---------
Co-authored-by: chrislu <chris.lu@gmail.com>
* S3 API: Fix SSE-S3 decryption on object download
Fixes#7363
This commit adds missing SSE-S3 decryption support when downloading
objects from SSE-S3 encrypted buckets. Previously, SSE-S3 encrypted
objects were returned in their encrypted form, causing data corruption
and hash mismatches.
Changes:
- Updated detectPrimarySSEType() to detect SSE-S3 encrypted objects
by examining chunk metadata and distinguishing SSE-S3 from SSE-KMS
- Added SSE-S3 handling in handleSSEResponse() to route to new handler
- Implemented handleSSES3Response() for both single-part and multipart
SSE-S3 encrypted objects with proper decryption
- Implemented createMultipartSSES3DecryptedReader() for multipart
objects with per-chunk decryption using stored IVs
- Updated addSSEHeadersToResponse() to include SSE-S3 response headers
The fix follows the existing SSE-C and SSE-KMS patterns, using the
envelope encryption architecture where each object's DEK is encrypted
with the KEK stored in the filer.
* Add comprehensive tests for SSE-S3 decryption
- TestSSES3EncryptionDecryption: basic encryption/decryption
- TestSSES3IsRequestInternal: request detection
- TestSSES3MetadataSerialization: metadata serialization/deserialization
- TestDetectPrimarySSETypeS3: SSE type detection for various scenarios
- TestAddSSES3HeadersToResponse: response header validation
- TestSSES3EncryptionWithBaseIV: multipart encryption with base IV
- TestSSES3WrongKeyDecryption: wrong key error handling
- TestSSES3KeyGeneration: key generation and uniqueness
- TestSSES3VariousSizes: encryption/decryption with various data sizes
- TestSSES3ResponseHeaders: response header correctness
- TestSSES3IsEncryptedInternal: metadata-based encryption detection
- TestSSES3InvalidMetadataDeserialization: error handling for invalid metadata
- TestGetSSES3Headers: header generation
- TestProcessSSES3Request: request processing
- TestGetSSES3KeyFromMetadata: key extraction from metadata
- TestSSES3EnvelopeEncryption: envelope encryption correctness
- TestValidateSSES3Key: key validation
All tests pass successfully, providing comprehensive coverage for the
SSE-S3 decryption fix.
* Address PR review comments
1. Fix resource leak in createMultipartSSES3DecryptedReader:
- Wrap decrypted reader with closer to properly release resources
- Ensure underlying chunkReader is closed when done
2. Handle mixed-encryption objects correctly:
- Check chunk encryption type before attempting decryption
- Pass through non-SSE-S3 chunks unmodified
- Log encryption type for debugging
3. Improve SSE type detection logic:
- Add explicit case for aws:kms algorithm
- Handle unknown algorithms gracefully
- Better documentation for tie-breaking precedence
4. Document tie-breaking behavior:
- Clarify that mixed encryption indicates potential corruption
- Explicit precedence order: SSE-C > SSE-KMS > SSE-S3
These changes address high-severity resource management issues and
improve robustness when handling edge cases and mixed-encryption
scenarios.
* Fix IV retrieval for small/inline SSE-S3 encrypted files
Critical bug fix: The previous implementation only looked for the IV in
chunk metadata, which would fail for small files stored inline (without
chunks).
Changes:
- Check object-level metadata (sseS3Key.IV) first for inline files
- Fallback to first chunk metadata only if object-level IV not found
- Improved error message to indicate both locations were checked
This ensures small SSE-S3 encrypted files (stored inline in entry.Content)
can be properly decrypted, as their IV is stored in the object-level
SeaweedFSSSES3Key metadata rather than in chunk metadata.
Fixes the high-severity issue identified in PR review.
* Clean up unused SSE metadata helper functions
Remove legacy SSE metadata helper functions that were never fully
implemented or used:
Removed unused functions:
- StoreSSECMetadata() / GetSSECMetadata()
- StoreSSEKMSMetadata() / GetSSEKMSMetadata()
- StoreSSES3Metadata() / GetSSES3Metadata()
- IsSSEEncrypted()
- GetSSEAlgorithm()
Removed unused constants:
- MetaSSEAlgorithm
- MetaSSECKeyMD5
- MetaSSEKMSKeyID
- MetaSSEKMSEncryptedKey
- MetaSSEKMSContext
- MetaSSES3KeyID
These functions were from an earlier design where IV and other metadata
would be stored in common entry.Extended keys. The actual implementations
use type-specific serialization:
- SSE-C: Uses StoreIVInMetadata()/GetIVFromMetadata() directly for IV
- SSE-KMS: Serializes entire SSEKMSKey structure as JSON (includes IV)
- SSE-S3: Serializes entire SSES3Key structure as JSON (includes IV)
This follows Option A: SSE-S3 uses envelope encryption pattern like
SSE-KMS, where IV is stored within the serialized key metadata rather
than in a separate metadata field.
Kept functions still in use:
- StoreIVInMetadata() - Used by SSE-C
- GetIVFromMetadata() - Used by SSE-C and streaming copy
- MetaSSEIV constant - Used by SSE-C
All tests pass after cleanup.
* Rename SSE metadata functions to clarify SSE-C specific usage
Renamed functions and constants to explicitly indicate they are SSE-C
specific, improving code clarity:
Renamed:
- MetaSSEIV → MetaSSECIV
- StoreIVInMetadata() → StoreSSECIVInMetadata()
- GetIVFromMetadata() → GetSSECIVFromMetadata()
Updated all usages across:
- s3api_key_rotation.go
- s3api_streaming_copy.go
- s3api_object_handlers_copy.go
- s3_sse_copy_test.go
- s3_sse_test_utils_test.go
Rationale:
These functions are exclusively used by SSE-C for storing/retrieving
the IV in entry.Extended metadata. SSE-KMS and SSE-S3 use different
approaches (IV stored in serialized key structures), so the generic
names were misleading. The new names make it clear these are part of
the SSE-C implementation.
All tests pass.
* Add integration tests for SSE-S3 end-to-end encryption/decryption
These integration tests cover the complete encrypt->store->decrypt cycle
that was missing from the original test suite. They would have caught
the IV retrieval bug for inline files.
Tests added:
- TestSSES3EndToEndSmallFile: Tests inline files (10, 50, 256 bytes)
* Specifically tests the critical IV retrieval path for inline files
* This test explicitly checks the bug we fixed where inline files
couldn't retrieve their IV from object-level metadata
- TestSSES3EndToEndChunkedFile: Tests multipart encrypted files
* Verifies per-chunk metadata serialization/deserialization
* Tests that each chunk can be independently decrypted with its own IV
- TestSSES3EndToEndWithDetectPrimaryType: Tests type detection
* Verifies inline vs chunked SSE-S3 detection
* Ensures SSE-S3 is distinguished from SSE-KMS
Note: Full HTTP handler tests (PUT -> GET through actual handlers) would
require a complete mock server with filer connections, which is complex.
These tests focus on the critical decrypt path and data flow.
Why these tests are important:
- Unit tests alone don't catch integration issues
- The IV retrieval bug existed because there was no end-to-end test
- These tests simulate the actual storage/retrieval flow
- They verify the complete encryption architecture works correctly
All tests pass.
* Fix TestValidateSSES3Key expectations to match actual implementation
The ValidateSSES3Key function only validates that the key struct is not
nil, but doesn't validate the Key field contents or size. The test was
expecting validation that doesn't exist.
Updated test cases:
- Nil key struct → should error (correct)
- Valid key → should not error (correct)
- Invalid key size → should not error (validation doesn't check this)
- Nil key bytes → should not error (validation doesn't check this)
Added comments to clarify what the current validation actually checks.
This matches the behavior of ValidateSSEKMSKey and ValidateSSECKey
which also only check for nil struct, not field contents.
All SSE tests now pass.
* Improve ValidateSSES3Key to properly validate key contents
Enhanced the validation function from only checking nil struct to
comprehensive validation of all key fields:
Validations added:
1. Key bytes not nil
2. Key size exactly 32 bytes (SSES3KeySize)
3. Algorithm must be "AES256" (SSES3Algorithm)
4. Key ID must not be empty
5. IV length must be 16 bytes if set (optional - set during encryption)
Test improvements (10 test cases):
- Nil key struct
- Valid key without IV
- Valid key with IV
- Invalid key size (too small)
- Invalid key size (too large)
- Nil key bytes
- Empty key ID
- Invalid algorithm
- Invalid IV length
- Empty IV (allowed - set during encryption)
This matches the robustness of SSE-C and SSE-KMS validation and will
catch configuration errors early rather than failing during
encryption/decryption.
All SSE tests pass.
* Replace custom string helper functions with strings.Contains
Address Gemini Code Assist review feedback:
- Remove custom contains() and findSubstring() helper functions
- Use standard library strings.Contains() instead
- Add strings import
This makes the code more idiomatic and easier to maintain by using
the standard library instead of reimplementing functionality.
Changes:
- Added "strings" to imports
- Replaced contains(err.Error(), tc.errorMsg) with strings.Contains(err.Error(), tc.errorMsg)
- Removed 15 lines of custom helper code
All tests pass.
* filer fix reading and writing SSE-S3 headers
* filter out seaweedfs internal headers
* Update weed/s3api/s3api_object_handlers.go
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update weed/s3api/s3_validation_utils.go
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update s3api_streaming_copy.go
* remove fallback
* remove redundant check
* refactor
* remove extra object fetching
* in case object is not found
* Correct Version Entry for SSE Routing
* Proper Error Handling for SSE Entry Fetching
* Eliminated All Redundant Lookups
* Removed brittle “exactly 5 successes/failures” assertions. Added invariant checks
total recorded attempts equals request count,
successes never exceed capacity,
failures cover remaining attempts,
final AvailableSpace matches capacity - successes.
* refactor
* fix test
* Fixed Broken Fallback Logic
* refactor
* Better Error for Encryption Type Mismatch
* refactor
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
chrislu
Chris Lu
Konstantin Lebedev