seaweedfs

Commit Graph

Author	SHA1	Message	Date
Chris Lu	72c2c7ef8b	Add iceberg_maintenance plugin worker handler (Phase 1) (#8501 ) * Add iceberg_maintenance plugin worker handler (Phase 1) Implement automated Iceberg table maintenance as a new plugin worker job type. The handler scans S3 table buckets for tables needing maintenance and executes operations in the correct Iceberg order: expire snapshots, remove orphan files, and rewrite manifests. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix unsafe int64→int narrowing for MaxSnapshotsToKeep Use int64(wouldKeep) instead of int(config.MaxSnapshotsToKeep) to avoid potential truncation on 32-bit platforms (CodeQL high severity). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix unsafe int64→int narrowing for MinInputFiles Use int64(len(manifests)) instead of int(config.MinInputFiles) to avoid potential truncation on 32-bit platforms (CodeQL high severity). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix unsafe int64→int narrowing for MaxCommitRetries Clamp MaxCommitRetries to [1,20] range and keep as int64 throughout the retry loop to avoid truncation on 32-bit platforms (CodeQL high severity). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Sort snapshots explicitly by timestamp in expireSnapshots The previous logic relied on implicit ordering of the snapshot list. Now explicitly sorts snapshots by timestamp descending (most recent first) and uses a simpler keep-count loop: keep the first MaxSnapshotsToKeep newest snapshots plus the current snapshot unconditionally, then expire the rest that exceed the retention window. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Handle errors properly in listFilerEntries Previously all errors from ListEntries and Recv were silently swallowed. Now: treat "not found" errors as empty directory, propagate other ListEntries errors, and check for io.EOF explicitly on Recv instead of breaking on any error. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix overly broad HasSuffix check in orphan detection The bare strings.HasSuffix(ref, entry.Name) could match files with similar suffixes (e.g. "123.avro" matching "snap-123.avro"). Replaced with exact relPath match and a "/"-prefixed suffix check to avoid false positives. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Replace fmt.Sscanf with strconv.Atoi in extractMetadataVersion strconv.Atoi is more explicit and less fragile than fmt.Sscanf for parsing a simple integer from a trimmed string. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Recursively traverse directories for orphan file detection The orphan cleanup only listed a single directory level under data/ and metadata/, skipping IsDirectory entries. Partitioned Iceberg tables store data files in nested partition directories (e.g. data/region=us-east/file.parquet) which were never evaluated. Add walkFilerEntries helper that recursively descends into subdirectories, and use it in removeOrphans so all nested files are considered for orphan checks. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix manifest path drift from double time.Now() calls rewriteManifests called time.Now().UnixMilli() twice: once for the path embedded in WriteManifest and once for the filename passed to saveFilerFile. These timestamps would differ, causing the manifest's internal path reference to not match the actual saved filename. Compute the filename once and reuse it for both WriteManifest and saveFilerFile so they always reference the same path. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add TestManifestRewritePathConsistency test Verifies that WriteManifest returns a ManifestFile whose FilePath() matches the path passed in, and that path.Base() of that path matches the filename used for saveFilerFile. This validates the single- timestamp pattern used in rewriteManifests produces consistent paths. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Make parseOperations return error on unknown operations Previously parseOperations silently dropped unknown operation names and could return an empty list. Now validates inputs against the canonical set and returns a clear error if any unknown operation is specified. Updated Execute to surface the error instead of proceeding with an empty operation list. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Use gRPC status codes instead of string matching in listFilerEntries Replace brittle strings.Contains(err.Error(), "not found") check with status.Code(err) == codes.NotFound for proper gRPC error handling. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add stale-plan guard in commit closures for expireSnapshots and rewriteManifests Both operations plan outside the commit mutation using a snapshot ID captured from the initial metadata read. If the table head advances concurrently, the mutation would create a snapshot parented to the wrong head or remove snapshots based on a stale view. Add a guard inside each mutation closure that verifies currentMeta.CurrentSnapshot().SnapshotID still matches the planned snapshot ID. If it differs, return errStalePlan which propagates immediately (not retried, since the plan itself is invalid). Also fix rewriteManifests to derive SequenceNumber from the fresh metadata (cs.SequenceNumber) instead of the captured currentSnap. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add compare-and-swap to updateTableMetadataXattr updateTableMetadataXattr previously re-read the entry but did not verify the metadataVersion matched what commitWithRetry had loaded. A concurrent update could be silently clobbered. Now accepts expectedVersion parameter and compares it against the stored metadataVersion before writing. Returns errMetadataVersionConflict on mismatch, which commitWithRetry treats as retryable (deletes the staged metadata file and retries with fresh state). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Export shared plugin worker helpers for use by sub-packages Export ShouldSkipDetectionByInterval, BuildExecutorActivity, and BuildDetectorActivity so the iceberg sub-package can reuse them without duplicating logic. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Refactor iceberg maintenance handler into weed/plugin/worker/iceberg package Split the 1432-line iceberg_maintenance_handler.go into focused files in a new iceberg sub-package: handler.go, config.go, detection.go, operations.go, filer_io.go, and compact.go (Phase 2 data compaction). Key changes: - Rename types to drop stutter (IcebergMaintenanceHandler → Handler, etc.) - Fix loadFileByIcebergPath to preserve nested directory paths via normalizeIcebergPath instead of path.Base which dropped subdirectories - Check SendProgress errors instead of discarding them - Add stale-plan guard to compactDataFiles commitWithRetry closure - Add "compact" operation to parseOperations canonical order - Duplicate readStringConfig/readInt64Config helpers (~20 lines) - Update worker_runtime.go to import new iceberg sub-package Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Remove iceberg_maintenance from default plugin worker job types Iceberg maintenance is not yet ready to be enabled by default. Workers can still opt in by explicitly listing iceberg_maintenance in their job types configuration. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Clamp config values to safe minimums in ParseConfig Prevents misconfiguration by enforcing minimum values using the default constants for all config fields. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Harden filer I/O: path helpers, strict CAS guard, path traversal prevention - Use path.Dir/path.Base instead of strings.SplitN in loadCurrentMetadata - Make CAS guard error on missing or unparseable metadataVersion - Add path.Clean and traversal validation in loadFileByIcebergPath Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix compact: single snapshot ID, oversized bin splitting, ensureFilerDir - Use single newSnapID for all manifest entries in a compaction run - Add splitOversizedBin to break bins exceeding targetSize - Make ensureFilerDir only create on NotFound, propagate other errors Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add wildcard filters, scan limit, and context cancellation to table scanning - Use wildcard matchers (, ?) for bucket/namespace/table filters - Add limit parameter to scanTablesForMaintenance for early termination - Add ctx.Done() checks in bucket and namespace scan loops - Update filter UI descriptions and placeholders for wildcard support Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> Remove dead detection interval check and validate namespace parameter - Remove ineffective ShouldSkipDetectionByInterval call with hardcoded 0 - Add namespace to required parameter validation in Execute Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Improve operations: exponential backoff, orphan matching, full file cleanup - Use exponential backoff (50ms, 100ms, 200ms, ...) in commitWithRetry - Use normalizeIcebergPath for orphan matching instead of fragile suffix check - Add collectSnapshotFiles to traverse manifest lists → manifests → data files - Delete all unreferenced files after expiring snapshots, not just manifest lists - Refactor removeOrphans to reuse collectSnapshotFiles Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * iceberg: fix ensureFilerDir to handle filer_pb.ErrNotFound sentinel filer_pb.LookupEntry converts gRPC NotFound errors to filer_pb.ErrNotFound (a plain sentinel), so status.Code() never returns codes.NotFound for that error. This caused ensureFilerDir to return an error instead of creating the directory when it didn't exist. * iceberg: clean up orphaned artifacts when compaction commit fails Track all files written during compaction (merged data files, manifest, manifest list) and delete them if the commit or any subsequent write step fails, preventing orphaned files from accumulating in the filer. * iceberg: derive tablePath from namespace/tableName when empty An empty table_path parameter would be passed to maintenance operations unchecked. Default it to path.Join(namespace, tableName) when not provided. * iceberg: make collectSnapshotFiles return error on read/parse failure Previously, errors reading manifests were logged and skipped, returning a partial reference set. This could cause incorrect delete decisions during snapshot expiration or orphan cleanup. Now the function returns an error and all callers abort when reference data is incomplete. * iceberg: include active metadata file in removeOrphans referenced set The metadataFileName returned by loadCurrentMetadata was discarded, so the active metadata file could be incorrectly treated as an orphan and deleted. Capture it and add it to the referencedFiles map. * iceberg: only retry commitWithRetry on metadata version conflicts Previously all errors from updateTableMetadataXattr triggered retries. Now only errMetadataVersionConflict causes retry; other errors (permissions, transport, malformed xattr) fail immediately. * iceberg: respect req.Limit in fakeFilerServer.ListEntries mock The mock ListEntries ignored the Limit field, so tests couldn't exercise pagination. Now it stops streaming once Limit entries have been sent. * iceberg: validate parquet schema compatibility before merging files mergeParquetFiles now compares each source file's schema against the first file's schema and aborts with a clear error if they differ, instead of blindly writing rows that could panic or produce corrupt output. * iceberg: normalize empty JobType to canonical jobType in Execute events When request.Job.JobType is empty, status events and completion messages were emitted with a blank job type. Derive a canonical value early and use it consistently in all outbound events. * iceberg: log warning on unexpected config value types in read helpers readStringConfig and readInt64Config now log a V(1) warning when they encounter an unhandled ConfigValue kind, aiding debugging of unexpected config types that silently fall back to defaults. * worker: add iceberg_maintenance to default plugin worker job types Workers using the default job types list didn't advertise the iceberg_maintenance handler despite the handler and canonical name being registered. Add it so workers pick up the handler by default. * iceberg: use defer and detached context for compaction artifact cleanup The cleanup closure used the job context which could already be canceled, and was not called on ctx.Done() early exits. Switch to a deferred cleanup with a detached context (30s timeout) so artifact deletion completes on all exit paths including context cancellation. * iceberg: use proportional jitter in commitWithRetry backoff Fixed 25ms max jitter becomes insignificant at higher retry attempts. Use 0-20% of the current backoff value instead so jitter scales with the exponential delay. * iceberg: add malformed filename cases to extractMetadataVersion test Cover edge cases like "invalid.metadata.json", "metadata.json", "", and "v.metadata.json" to ensure the function returns 0 for unparseable inputs. * iceberg: fail compaction on manifest read errors and skip delete manifests Previously, unreadable manifests were silently skipped during compaction, which could drop live files from the entry set. Now manifest read/parse errors are returned as fatal errors. Also abort compaction when delete manifests exist since the compactor does not apply deletes — carrying them through unchanged could produce incorrect results. * iceberg: use table-relative path for active metadata file in orphan scan metadataFileName was stored as a basename (e.g. "v1.metadata.json") but the orphan scanner matches against table-relative paths like "metadata/v1.metadata.json". Prefix with "metadata/" so the active metadata file is correctly recognized as referenced. * iceberg: fix MetadataBuilderFromBase location to use metadata file path The second argument to MetadataBuilderFromBase records the previous metadata file in the metadata log. Using meta.Location() (the table root) was incorrect — it must be the actual metadata file path so old metadata files can be tracked and eventually cleaned up. * iceberg: update metadataLocation and versionToken in xattr on commit updateTableMetadataXattr was only updating metadataVersion, modifiedAt, and fullMetadata but not metadataLocation or versionToken. This left catalog state inconsistent after maintenance commits — the metadataLocation still pointed to the old metadata file and the versionToken was stale. Add a newMetadataLocation parameter and regenerate the versionToken on every commit, matching the S3 Tables handler behavior. * iceberg: group manifest entries by partition spec in rewriteManifests rewriteManifests was writing all entries into a single manifest using the table's current partition spec. For spec-evolved tables where manifests reference different partition specs, this produces an invalid manifest. Group entries by the source manifest's PartitionSpecID and write one merged manifest per spec, looking up each spec from the table's PartitionSpecs list. * iceberg: remove dead code loop for non-data manifests in compaction The early abort guard at the top of compactDataFiles already ensures no delete manifests are present. The loop that copied non-data manifests into allManifests was unreachable dead code. * iceberg: use JSON encoding in partitionKey for unambiguous grouping partitionKey used fmt.Sprintf("%d=%v") joined by commas, which produces ambiguous keys when partition values contain commas or '='. Use json.Marshal for values and NUL byte as separator to eliminate collisions. * iceberg: precompute normalized reference set in removeOrphans The orphan check was O(files × refs) because it normalized each reference path inside the per-file loop. Precompute the normalized set once for O(1) lookups per candidate file. * iceberg: add artifact cleanup to rewriteManifests on commit failure rewriteManifests writes merged manifests and a manifest list to the filer before committing but did not clean them up on failure. Add the same deferred cleanup pattern used by compactDataFiles: track written artifacts and delete them if the commit does not succeed. * iceberg: pass isDeleteData=true in deleteFilerFile deleteFilerFile called DoRemove with isDeleteData=false, which only removed filer metadata and left chunk data behind on volume servers. All other data-file deletion callers in the codebase pass true. * iceberg: clean up test: remove unused snapID, simplify TestDetectWithFakeFiler Remove unused snapID variable and eliminate the unnecessary second fake filer + entry copy in TestDetectWithFakeFiler by capturing the client from the first startFakeFiler call. * fix: update TestWorkerDefaultJobTypes to expect 5 job types The test expected 4 default job types but iceberg_maintenance was added as a 5th default in a previous commit. * iceberg: document client-side CAS TOCTOU limitation in updateTableMetadataXattr Add a note explaining the race window where two workers can both pass the version check and race at UpdateEntry. The proper fix requires server-side precondition support on UpdateEntryRequest. * iceberg: remove unused sender variable in TestFullExecuteFlow * iceberg: abort compaction when multiple partition specs are present The compactor writes all entries into a single manifest using the current partition spec, which is invalid for spec-evolved tables. Detect multiple PartitionSpecIDs and skip compaction until per-spec compaction is implemented. * iceberg: validate tablePath to prevent directory traversal Sanitize the table_path parameter with path.Clean and verify it matches the expected namespace/tableName prefix to prevent path traversal attacks via crafted job parameters. * iceberg: cap retry backoff at 5s and make it context-aware The exponential backoff could grow unbounded and blocked on time.Sleep ignoring context cancellation. Cap at 5s and use a timer with select on ctx.Done so retries respect cancellation. * iceberg: write manifest list with new snapshot identity in rewriteManifests The manifest list was written with the old snapshot's ID and sequence number, but the new snapshot created afterwards used a different identity. Compute newSnapshotID and newSeqNum before writing manifests and the manifest list so all artifacts are consistent. * ec: also remove .vif file in removeEcVolumeFiles removeEcVolumeFiles cleaned up .ecx, .ecj, and shard files but not the .vif volume info file, leaving it orphaned. The .vif file lives in the data directory alongside shard files. The directory handling for index vs data files was already correct: .ecx/.ecj are removed from IdxDirectory and shard files from Directory, matching how NewEcVolume loads them. Revert "ec: also remove .vif file in removeEcVolumeFiles" This reverts commit `acc82449e1`. * iceberg: skip orphan entries with nil Attributes instead of defaulting to epoch When entry.Attributes is nil, mtime defaulted to Unix epoch (1970), making unknown-age entries appear ancient and eligible for deletion. Skip these entries instead to avoid deleting files whose age cannot be determined. * iceberg: use unique metadata filenames to prevent concurrent write clobbering Add timestamp nonce to metadata filenames (e.g. v3-1709766000.metadata.json) so concurrent writers stage to distinct files. Update extractMetadataVersion to strip the nonce suffix, and loadCurrentMetadata to read the actual filename from the metadataLocation xattr field. * iceberg: defer artifact tracking until data file builder succeeds Move the writtenArtifacts append to after NewDataFileBuilder succeeds, so a failed builder doesn't leave a stale entry for an already-deleted file in the cleanup list. * iceberg: use detached context for metadata file cleanup Use context.WithTimeout(context.Background(), 10s) when deleting staged metadata files after CAS failure, so cleanup runs even if the original request context is canceled. * test: update default job types count to include iceberg_maintenance * iceberg: use parquet.EqualNodes for structural schema comparison Replace String()-based schema comparison with parquet.EqualNodes which correctly compares types, repetition levels, and logical types. * iceberg: add nonce-suffixed filename cases to TestExtractMetadataVersion * test: assert iceberg_maintenance is present in default job types * iceberg: validate operations config early in Detect Call parseOperations in Detect so typos in the operations config fail fast before emitting proposals, matching the validation already done in Execute. * iceberg: detect chunked files in loadFileByIcebergPath Return an explicit error when a file has chunks but no inline content, rather than silently returning empty data. Data files uploaded via S3 are stored as chunks, so compaction would otherwise produce corrupt merged files. --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>	2 days ago
Chris Lu	d89eb8267f	s3: use url.PathUnescape for X-Amz-Copy-Source header (#8545 ) * s3: use url.PathUnescape for X-Amz-Copy-Source header (#8544) The X-Amz-Copy-Source header is a URL-encoded path, not a query string. Using url.QueryUnescape incorrectly converts literal '+' characters to spaces, which can cause object key mismatches during copy operations. Switch to url.PathUnescape in CopyObjectHandler, CopyObjectPartHandler, and pathToBucketObjectAndVersion to correctly handle special characters like '!', '+', and other RFC 3986 sub-delimiters that S3 clients may percent-encode (e.g. '!' as %21). * s3: add path validation to CopyObjectPartHandler CopyObjectPartHandler was missing the validateTableBucketObjectPath checks that CopyObjectHandler has, allowing potential path traversal in the source bucket/object of copy part requests. * s3: fix case-sensitive HeadersRegexp for copy source routing The HeadersRegexp for X-Amz-Copy-Source used `%2F` which only matched uppercase hex encoding. RFC 3986 allows both `%2F` and `%2f`, so clients sending lowercase percent-encoding would bypass the copy handler and hit PutObjectHandler instead. Add (?i) flag for case-insensitive matching. Also add test coverage for the versionId branch in pathToBucketObjectAndVersion and for lowercase %2f routing.	2 days ago
Chris Lu	3f946fc0c0	mount: make metadata cache rebuilds snapshot-consistent (#8531 ) * filer: expose metadata events and list snapshots * mount: invalidate hot directory caches * mount: read hot directories directly from filer * mount: add sequenced metadata cache applier * mount: apply metadata responses through cache applier * mount: replay snapshot-consistent directory builds * mount: dedupe self metadata events * mount: factor directory build cleanup * mount: replace proto marshal dedup with composite key and ring buffer The dedup logic was doing a full deterministic proto.Marshal on every metadata event just to produce a dedup key. Replace with a cheap composite string key (TsNs\|Directory\|OldName\|NewName). Also replace the sliding-window slice (which leaked the backing array unboundedly) with a fixed-size ring buffer that reuses the same array. * filer: remove mutex and proto.Clone from request-scoped MetadataEventSink MetadataEventSink is created per-request and only accessed by the goroutine handling the gRPC call. The mutex and double proto.Clone (once in Record, once in Last) were unnecessary overhead on every filer write operation. Store the pointer directly instead. * mount: skip proto.Clone for caller-owned metadata events Add ApplyMetadataResponseOwned that takes ownership of the response without cloning. Local metadata events (mkdir, create, flush, etc.) are freshly constructed and never shared, so the clone is unnecessary. * filer: only populate MetadataEvent on successful DeleteEntry Avoid calling eventSink.Last() on error paths where the sink may contain a partial event from an intermediate child deletion during recursive deletes. * mount: avoid map allocation in collectDirectoryNotifications Replace the map with a fixed-size array and linear dedup. There are at most 3 directories to notify (old parent, new parent, new child if directory), so a 3-element array avoids the heap allocation on every metadata event. * mount: fix potential deadlock in enqueueApplyRequest Release applyStateMu before the blocking channel send. Previously, if the channel was full (cap 128), the send would block while holding the mutex, preventing Shutdown from acquiring it to set applyClosed. * mount: restore signature-based self-event filtering as fast path Re-add the signature check that was removed when content-based dedup was introduced. Checking signatures is O(1) on a small slice and avoids enqueuing and processing events that originated from this mount instance. The content-based dedup remains as a fallback. * filer: send snapshotTsNs only in first ListEntries response The snapshot timestamp is identical for every entry in a single ListEntries stream. Sending it in every response message wastes wire bandwidth for large directories. The client already reads it only from the first response. * mount: exit read-through mode after successful full directory listing MarkDirectoryRefreshed was defined but never called, so directories that entered read-through mode (hot invalidation threshold) stayed there permanently, hitting the filer on every readdir even when cold. Call it after a complete read-through listing finishes. * mount: include event shape and full paths in dedup key The previous dedup key only used Names, which could collapse distinct rename targets. Include the event shape (C/D/U/R), source directory, new parent path, and both entry names so structurally different events are never treated as duplicates. * mount: drain pending requests on shutdown in runApplyLoop After receiving the shutdown sentinel, drain any remaining requests from applyCh non-blockingly and signal each with errMetaCacheClosed so callers waiting on req.done are released. * mount: include IsDirectory in synthetic delete events metadataDeleteEvent now accepts an isDirectory parameter so the applier can distinguish directory deletes from file deletes. Rmdir passes true, Unlink passes false. * mount: fall back to synthetic event when MetadataEvent is nil In mknod and mkdir, if the filer response omits MetadataEvent (e.g. older filer without the field), synthesize an equivalent local metadata event so the cache is always updated. * mount: make Flush metadata apply best-effort after successful commit After filer_pb.CreateEntryWithResponse succeeds, the entry is persisted. Don't fail the Flush syscall if the local metadata cache apply fails — log and invalidate the directory cache instead. Also fall back to a synthetic event when MetadataEvent is nil. * mount: make Rename metadata apply best-effort The rename has already succeeded on the filer by the time we apply the local metadata event. Log failures instead of returning errors that would be dropped by the caller anyway. * mount: make saveEntry metadata apply best-effort with fallback After UpdateEntryWithResponse succeeds, treat local metadata apply as non-fatal. Log and invalidate the directory cache on failure. Also fall back to a synthetic event when MetadataEvent is nil. * filer_pb: preserve snapshotTsNs on error in ReadDirAllEntriesWithSnapshot Return the snapshot timestamp even when the first page fails, so callers receive the snapshot boundary when partial data was received. * filer: send snapshot token for empty directory listings When no entries are streamed, send a final ListEntriesResponse with only SnapshotTsNs so clients always receive the snapshot boundary. * mount: distinguish not-found vs transient errors in lookupEntry Return fuse.EIO for non-not-found filer errors instead of unconditionally returning ENOENT, so transient failures don't masquerade as missing entries. * mount: make CacheRemoteObject metadata apply best-effort The file content has already been cached successfully. Don't fail the read if the local metadata cache update fails. * mount: use consistent snapshot for readdir in direct mode Capture the SnapshotTsNs from the first loadDirectoryEntriesDirect call and store it on the DirectoryHandle. Subsequent batch loads pass this stored timestamp so all batches use the same snapshot. Also export DoSeaweedListWithSnapshot so mount can use it directly with snapshot passthrough. * filer_pb: fix test fake to send SnapshotTsNs only on first response Match the server behavior: only the first ListEntriesResponse in a page carries the snapshot timestamp, subsequent entries leave it zero. * Fix nil pointer dereference in ListEntries stream consumers Remove the empty-directory snapshot-only response from ListEntries that sent a ListEntriesResponse with Entry==nil, which crashed every raw stream consumer that assumed resp.Entry is always non-nil. Also add defensive nil checks for resp.Entry in all raw ListEntries stream consumers across: S3 listing, broker topic lookup, broker topic config, admin dashboard, topic retention, hybrid message scanner, Kafka integration, and consumer offset storage. * Add nil guards for resp.Entry in remaining ListEntries stream consumers Covers: S3 object lock check, MQ management dashboard (version/ partition/offset loops), and topic retention version loop. * Make applyLocalMetadataEvent best-effort in Link and Symlink The filer operations already succeeded; failing the syscall because the local cache apply failed is wrong. Log a warning and invalidate the parent directory cache instead. * Make applyLocalMetadataEvent best-effort in Mkdir/Rmdir/Mknod/Unlink The filer RPC already committed; don't fail the syscall when the local metadata cache apply fails. Log a warning and invalidate the parent directory cache to force a re-fetch on next access. * flushFileMetadata: add nil-fallback for metadata event and best-effort apply Synthesize a metadata event when resp.GetMetadataEvent() is nil (matching doFlush), and make the apply best-effort with cache invalidation on failure. * Prevent double-invocation of cleanupBuild in doEnsureVisited Add a cleanupDone guard so the deferred cleanup and inline error-path cleanup don't both call DeleteFolderChildren/AbortDirectoryBuild. * Fix comment: signature check is O(n) not O(1) * Prevent deferred cleanup after successful CompleteDirectoryBuild Set cleanupDone before returning from the success path so the deferred context-cancellation check cannot undo a published build. * Invalidate parent directory caches on rename metadata apply failure When applyLocalMetadataEvent fails during rename, invalidate the source and destination parent directory caches so subsequent accesses trigger a re-fetch from the filer. * Add event nil-fallback and cache invalidation to Link and Symlink Synthesize metadata events when the server doesn't return one, and invalidate parent directory caches on apply failure. * Match requested partition when scanning partition directories Parse the partition range format (NNNN-NNNN) and match against the requested partition parameter instead of using the first directory. * Preserve snapshot timestamp across empty directory listings Initialize actualSnapshotTsNs from the caller-requested value so it isn't lost when the server returns no entries. Re-add the server-side snapshot-only response for empty directories (all raw stream consumers now have nil guards for Entry). * Fix CreateEntry error wrapping to support errors.Is/errors.As Use errors.New + %w instead of %v for resp.Error so callers can unwrap the underlying error. * Fix object lock pagination: only advance on non-nil entries Move entriesReceived inside the nil check so nil entries don't cause repeated ListEntries calls with the same lastFileName. * Guard Attributes nil check before accessing Mtime in MQ management * Do not send nil-Entry response for empty directory listings The snapshot-only ListEntriesResponse (with Entry == nil) for empty directories breaks consumers that treat any received response as an entry (Java FilerClient, S3 listing). The Go client-side DoSeaweedListWithSnapshot already preserves the caller-requested snapshot via actualSnapshotTsNs initialization, so the server-side send is unnecessary. * Fix review findings: subscriber dedup, invalidation normalization, nil guards, shutdown race - Remove self-signature early-return in processEventFn so all events flow through the applier (directory-build buffering sees self-originated events that arrive after a snapshot) - Normalize NewParentPath in collectEntryInvalidations to avoid duplicate invalidations when NewParentPath is empty (same-directory update) - Guard resp.Entry.Attributes for nil in admin_server.go and topic_retention.go to prevent panics on entries without attributes - Fix enqueueApplyRequest race with shutdown by using select on both applyCh and applyDone, preventing sends after the apply loop exits - Add cleanupDone check to deferred cleanup in meta_cache_init.go for clarity alongside the existing guard in cleanupBuild - Add empty directory test case for snapshot consistency * Propagate authoritative metadata event from CacheRemoteObjectToLocalCluster and generate client-side snapshot for empty directories - Add metadata_event field to CacheRemoteObjectToLocalClusterResponse proto so the filer-emitted event is available to callers - Use WithMetadataEventSink in the server handler to capture the event from NotifyUpdateEvent and return it on the response - Update filehandle_read.go to prefer the RPC's metadata event over a locally fabricated one, falling back to metadataUpdateEvent when the server doesn't provide one (e.g., older filers) - Generate a client-side snapshot cutoff in DoSeaweedListWithSnapshot when the server sends no snapshot (empty directory), so callers like CompleteDirectoryBuild get a meaningful boundary for filtering buffered events * Skip directory notifications for dirs being built to prevent mid-build cache wipe When a metadata event is buffered during a directory build, applyMetadataSideEffects was still firing noteDirectoryUpdate for the building directory. If the directory accumulated enough updates to become "hot", markDirectoryReadThrough would call DeleteFolderChildren, wiping entries that EnsureVisited had already inserted. The build would then complete and mark the directory cached with incomplete data. Fix by using applyMetadataSideEffectsSkippingBuildingDirs for buffered events, which suppresses directory notifications for dirs currently in buildingDirs while still applying entry invalidations. * Add test for directory notification suppression during active build TestDirectoryNotificationsSuppressedDuringBuild verifies that metadata events targeting a directory under active EnsureVisited build do NOT fire onDirectoryUpdate for that directory. In production, this prevents markDirectoryReadThrough from calling DeleteFolderChildren mid-build, which would wipe entries already inserted by the listing. The test inserts an entry during a build, sends multiple metadata events for the building directory, asserts no notifications fired for it, verifies the entry survives, and confirms buffered events are replayed after CompleteDirectoryBuild. * Fix create invalidations, build guard, event shape, context, and snapshot error path - collectEntryInvalidations: invalidate FUSE kernel cache on pure create events (OldEntry==nil && NewEntry!=nil), not just updates and deletes - completeDirectoryBuildNow: only call markCachedFn when an active build existed (state != nil), preventing an unpopulated directory from being marked as cached - Add metadataCreateEvent helper that produces a create-shaped event (NewEntry only, no OldEntry) and use it in mkdir, mknod, symlink, and hardlink create fallback paths instead of metadataUpdateEvent which incorrectly set both OldEntry and NewEntry - applyMetadataResponseEnqueue: use context.Background() for the queued mutation so a cancelled caller context cannot abort the apply loop mid-write - DoSeaweedListWithSnapshot: move snapshot initialization before ListEntries call so the error path returns the preserved snapshot instead of 0 * Fix review findings: test loop, cache race, context safety, snapshot consistency - Fix build test loop starting at i=1 instead of i=0, missing new-0.txt verification - Re-check IsDirectoryCached after cache miss to avoid ENOENT race with markDirectoryReadThrough - Use context.Background() in enqueueAndWait so caller cancellation can't abort build/complete mid-way - Pass dh.snapshotTsNs in skip-batch loadDirectoryEntriesDirect for snapshot consistency - Prefer resp.MetadataEvent over fallback in Unlink event derivation - Add comment on MetadataEventSink.Record single-event assumption * Fix empty-directory snapshot clock skew and build cancellation race Empty-directory snapshot: Remove client-side time.Now() synthesis when the server returns no entries. Instead return snapshotTsNs=0, and in completeDirectoryBuildNow replay ALL buffered events when snapshot is 0. This eliminates the clock-skew bug where a client ahead of the filer would filter out legitimate post-list events. Build cancellation: Use context.Background() for BeginDirectoryBuild and CompleteDirectoryBuild calls in doEnsureVisited, so errgroup cancellation doesn't cause enqueueAndWait to return early and trigger cleanupBuild while the operation is still queued. * Add tests for empty-directory build replay and cancellation resilience TestEmptyDirectoryBuildReplaysAllBufferedEvents: verifies that when CompleteDirectoryBuild receives snapshotTsNs=0 (empty directory, no server snapshot), ALL buffered events are replayed regardless of their TsNs values — no clock-skew-sensitive filtering occurs. TestBuildCompletionSurvivesCallerCancellation: verifies that once CompleteDirectoryBuild is enqueued, a cancelled caller context does not prevent the build from completing. The apply loop runs with context.Background(), so the directory becomes cached and buffered events are replayed even when the caller gives up waiting. * Fix directory subtree cleanup, Link rollback, test robustness - applyMetadataResponseLocked: when a directory entry is deleted or moved, call DeleteFolderChildren on the old path so cached descendants don't leak as stale entries. - Link: save original HardLinkId/Counter before mutation. If CreateEntryWithResponse fails after the source was already updated, rollback the source entry to its original state via UpdateEntry. - TestBuildCompletionSurvivesCallerCancellation: replace fixed time.Sleep(50ms) with a deadline-based poll that checks IsDirectoryCached in a loop, failing only after 2s timeout. - TestReadDirAllEntriesWithSnapshotEmptyDirectory: assert that ListEntries was actually invoked on the mock client so the test exercises the RPC path. - newMetadataEvent: add early return when both oldEntry and newEntry are nil to avoid emitting events with empty Directory. --------- Co-authored-by: Copilot <copilot@github.com>	2 days ago
Chris Lu	af4c3fcb31	ec: fall back to data dir when ecx file not found in idx dir (#8541 ) * ec: fall back to data dir when ecx file not found in idx dir (#8540) When -dir.idx is configured after EC encoding, the .ecx/.ecj files remain in the data directory. NewEcVolume now falls back to the data directory when the index file is not found in dirIdx. * ec: add fallback logging and improved error message for ecx lookup * ec: preserve configured dirIdx, track actual ecx location separately The previous fallback set ev.dirIdx = dir when finding .ecx in the data directory, which corrupted IndexBaseFileName() for future writes (e.g., WriteIdxFileFromEcIndex during EC-to-volume conversion would write the .idx file to the data directory instead of the configured index directory). Introduce ecxActualDir to track where .ecx/.ecj were actually found, used only by FileName() for cleanup/destroy. IndexBaseFileName() continues to use the configured dirIdx for new file creation. * ec: check both idx and data dirs for .ecx in all cleanup and lookup paths When -dir.idx is configured after EC encoding, .ecx/.ecj files may reside in the data directory. Several code paths only checked l.IdxDirectory, causing them to miss these files: - removeEcVolumeFiles: now removes .ecx/.ecj from both directories - loadExistingVolume: ecx existence check falls back to data dir - deleteEcShardIdsForEachLocation: ecx existence check and cleanup both cover the data directory - VolumeEcShardsRebuild: ecx lookup falls back to data directory so RebuildEcxFile operates on the correct file	2 days ago
Surote	bfc430afbd	Update helm for support on OpenShift to have data replication and replicas for master,filer and volume (#8543 )	2 days ago
Chris Lu	540fc97e00	s3/iam: reuse one request id per request (#8538 ) * request_id: add shared request middleware * s3err: preserve request ids in responses and logs * iam: reuse request ids in XML responses * sts: reuse request ids in XML responses * request_id: drop legacy header fallback * request_id: use AWS-style request id format * iam: fix AWS-compatible XML format for ErrorResponse and field ordering - ErrorResponse uses bare <RequestId> at root level instead of <ResponseMetadata> wrapper, matching the AWS IAM error response spec - Move CommonResponse to last field in success response structs so <ResponseMetadata> serializes after result elements - Add randomness to request ID generation to avoid collisions - Add tests for XML ordering and ErrorResponse format * iam: remove duplicate error_response_test.go Test is already covered by responses_test.go. * address PR review comments - Guard against typed nil pointers in SetResponseRequestID before interface assertion (CodeRabbit) - Use regexp instead of strings.Index in test helpers for extracting request IDs (Gemini) * request_id: prevent spoofing, fix nil-error branch, thread reqID to error writers - Ensure() now always generates a server-side ID, ignoring client-sent x-amz-request-id headers to prevent request ID spoofing. Uses a private context key (contextKey{}) instead of the header string. - writeIamErrorResponse in both iamapi and embedded IAM now accepts reqID as a parameter instead of calling Ensure() internally, ensuring a single request ID per request lifecycle. - The nil-iamError branch in writeIamErrorResponse now writes a 500 Internal Server Error response instead of returning silently. - Updated tests to set request IDs via context (not headers) and added tests for spoofing prevention and context reuse. * sts: add request-id consistency assertions to ActionInBody tests * test: update admin test to expect server-generated request IDs The test previously sent a client x-amz-request-id header and expected it echoed back. Since Ensure() now ignores client headers to prevent spoofing, update the test to verify the server returns a non-empty server-generated request ID instead. * iam: add generic WithRequestID helper alongside reflection-based fallback Add WithRequestID[T] that uses generics to take the address of a value type, satisfying the pointer receiver on SetRequestId without reflection. The existing SetResponseRequestID is kept for the two call sites that operate on interface{} (from large action switches where the concrete type varies at runtime). Generics cannot replace reflection there since Go cannot infer type parameters from interface{}. * Remove reflection and generics from request ID setting Call SetRequestId directly on concrete response types in each switch branch before boxing into interface{}, eliminating the need for WithRequestID (generics) and SetResponseRequestID (reflection). * iam: return pointer responses in action dispatch * Fix IAM error handling consistency and ensure request IDs on all responses - UpdateUser/CreatePolicy error branches: use writeIamErrorResponse instead of s3err.WriteErrorResponse to preserve IAM formatting and request ID - ExecuteAction: accept reqID parameter and generate one if empty, ensuring every response carries a RequestId regardless of caller * Clean up inline policies on DeleteUser and UpdateUser rename DeleteUser: remove InlinePolicies[userName] from policy storage before removing the identity, so policies are not orphaned. UpdateUser: move InlinePolicies[userName] to InlinePolicies[newUserName] when renaming, so GetUserPolicy/DeleteUserPolicy work under the new name. Both operations persist the updated policies and return an error if the storage write fails, preventing partial state.	3 days ago
Aaron	14cd0f53ba	Places the CommonResponse struct at the end of all IAM responses. (#8537 ) * Places the CommonResponse struct at the end of all IAM responses, rather than the start. * iam: fix error response request id layout * iam: add XML ordering regression test * iam: share request id generation --------- Co-authored-by: Aaron Segal <aaron.segal@rpsolutions.com> Co-authored-by: Chris Lu <chris.lu@gmail.com>	3 days ago
Chris Lu	f9311a3422	s3api: fix static IAM policy enforcement after reload (#8532 ) * s3api: honor attached IAM policies over legacy actions * s3api: hydrate IAM policy docs during config reload * s3api: use policy-aware auth when listing buckets * credential: propagate context through filer_etc policy reads * credential: make legacy policy deletes durable * s3api: exercise managed policy runtime loader * s3api: allow static IAM users without session tokens * iam: deny unmatched attached policies under default allow * iam: load embedded policy files from filer store * s3api: require session tokens for IAM presigning * s3api: sync runtime policies into zero-config IAM * credential: respect context in policy file loads * credential: serialize legacy policy deletes * iam: align filer policy store naming * s3api: use authenticated principals for presigning * iam: deep copy policy conditions * s3api: require request creation in policy tests * filer: keep ReadInsideFiler as the context-aware API * iam: harden filer policy store writes * credential: strengthen legacy policy serialization test * credential: forward runtime policy loaders through wrapper * s3api: harden runtime policy merging * iam: require typed already-exists errors	3 days ago
Chris Lu	338be16254	fix logs	4 days ago
Chris Lu	1b6e96614d	s3api: cache parsed IAM policy engines for fallback auth Previously, evaluateIAMPolicies created a new PolicyEngine and re-parsed the JSON policy document for every policy on every request. This adds a shared iamPolicyEngine field that caches compiled policies, kept in sync by PutPolicy, DeletePolicy, and bulk config reload paths. - PutPolicy deletes the old cache entry before setting the new one, so a parse failure on update does not leave a stale allow. - Log warnings when policy compilation fails instead of silently discarding errors. - Add test for valid-to-invalid policy update regression.	4 days ago
SrikanthBhandary	4eb45ecc5e	s3api: add IAM policy fallback authorization tests (#8518 ) * s3api: add IAM policy fallback auth with tests * s3api: use policy engine for IAM fallback evaluation	4 days ago
Chris Lu	1f3df6e9ef	admin: remove Alpha badge and unused Metrics/Logs menu items (#8525 ) * admin: remove Alpha badge and unused Metrics/Logs menu items * Update layout_templ.go	4 days ago
Chris Lu	fcd5de9710	Fix YAML parse error in post-install-bucket-hook template (#8523 ) The 'set -o pipefail' line was improperly indented outside the YAML block scalar, causing a parse error when s3.enabled=true and s3.createBuckets were populated. Moved the line to the beginning of the script block with correct indentation (12 spaces). Fixes #8520 Co-authored-by: Claude Haiku 4.5 <noreply@anthropic.com>	4 days ago
Steven Crespo	b6f6f0187e	Add before-hook-creation delete policy to bucket-hook Job (#8519 )	4 days ago
Chris Lu	230ae9c24e	no need to set default scripts now	5 days ago
Chris Lu	b3f7472fd3	4.15	5 days ago
Chris Lu	b3620c7e14	admin: auto migrating master maintenance scripts to admin_script plugin config (#8509 ) * admin: seed admin_script plugin config from master maintenance scripts When the admin server starts, fetch the maintenance scripts configuration from the master via GetMasterConfiguration. If the admin_script plugin worker does not already have a saved config, use the master's scripts as the default value. This enables seamless migration from master.toml [master.maintenance] to the admin script plugin worker. Changes: - Add maintenance_scripts and maintenance_sleep_minutes fields to GetMasterConfigurationResponse in master.proto - Populate the new fields from viper config in master_grpc_server.go - On admin server startup, fetch the master config and seed the admin_script plugin config if no config exists yet - Strip lock/unlock commands from the master scripts since the admin script worker handles locking automatically Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fix: address review comments on admin_script seeding - Replace TOCTOU race (separate Load+Save) with atomic SaveJobTypeConfigIfNotExists on ConfigStore and Plugin - Replace ineffective polling loop with single GetMaster call using 30s context timeout, since GetMaster respects context cancellation - Add unit tests for SaveJobTypeConfigIfNotExists (in-memory + on-disk) Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fix: apply maintenance script defaults in gRPC handler The gRPC handler for GetMasterConfiguration read maintenance scripts from viper without calling SetDefault, relying on startAdminScripts having run first. If the admin server calls GetMasterConfiguration before startAdminScripts sets the defaults, viper returns empty strings and the seeding is silently skipped. Apply SetDefault in the gRPC handler itself so it is self-contained. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Revert "fix: apply maintenance script defaults in gRPC handler" This reverts commit `068a506330`. * fix: use atomic save in ensureJobTypeConfigFromDescriptor ensureJobTypeConfigFromDescriptor used a separate Load + Save, racing with seedAdminScriptFromMaster. If the descriptor defaults (empty script) were saved first, SaveJobTypeConfigIfNotExists in the seeding goroutine would see an existing config and skip, losing the master's maintenance scripts. Switch to SaveJobTypeConfigIfNotExists so both paths are atomic. Whichever wins, the other is a safe no-op. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fix: fetch master scripts inline during config bootstrap, not in goroutine Replace the seedAdminScriptFromMaster goroutine with a ConfigDefaultsProvider callback. When the plugin bootstraps admin_script defaults from the worker descriptor, it calls the provider which fetches maintenance scripts from the master synchronously. This eliminates the race between the seeding goroutine and the descriptor-based config bootstrap. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * skip commented lock unlock Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * reduce grpc calls --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	5 days ago
Chris Lu	7799804200	4.14 Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>	5 days ago
Chris Lu	c19f88eef1	fix: resolve ServerAddress to NodeId in maintenance task sync (#8508 ) * fix: maintenance task topology lookup, retry, and stale task cleanup 1. Strip gRPC port from ServerAddress in SyncTask using ToHttpAddress() so task targets match topology disk keys (NodeId format). 2. Skip capacity check when topology has no disks yet (startup race where tasks are loaded from persistence before first topology update). 3. Don't retry permanent errors like "volume not found" - these will never succeed on retry. 4. Cancel all pending tasks for each task type before re-detection, ensuring stale proposals from previous cycles are cleaned up. This prevents stale tasks from blocking new detection and from repeatedly failing. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * logs Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * less lock scope Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	5 days ago
Fábio Henrique Araújo	88e8342e44	style: Reseted padding to container-fluid div in layout template (#8505 ) * style: Reseted padding to container-fluid div in layout template * address comment Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> --------- Co-authored-by: Chris Lu <chris.lu@gmail.com> Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	5 days ago
Chris Lu	df5e8210df	Implement IAM managed policy operations (#8507 ) * feat: Implement IAM managed policy operations (GetPolicy, ListPolicies, DeletePolicy, AttachUserPolicy, DetachUserPolicy) - Add response type aliases in iamapi_response.go for managed policy operations - Implement 6 handler methods in iamapi_management_handlers.go: - GetPolicy: Lookup managed policy by ARN - DeletePolicy: Remove managed policy - ListPolicies: List all managed policies - AttachUserPolicy: Attach managed policy to user, aggregating inline + managed actions - DetachUserPolicy: Detach managed policy from user - ListAttachedUserPolicies: List user's attached managed policies - Add computeAllActionsForUser() to aggregate actions from both inline and managed policies - Wire 6 new DoActions switch cases for policy operations - Add comprehensive tests for all new handlers - Fixes #8506 Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fix: address PR review feedback for IAM managed policy operations - Add parsePolicyArn() helper with proper ARN prefix validation, replacing fragile strings.Split parsing in GetPolicy, DeletePolicy, AttachUserPolicy, and DetachUserPolicy - DeletePolicy now detaches the policy from all users and recomputes their aggregated actions, preventing stale permissions after deletion - Set changed=true for DeletePolicy DoActions case so identity updates persist - Make PolicyId consistent: CreatePolicy now uses Hash(&policyName) matching GetPolicy and ListPolicies - Remove redundant nil map checks (Go handles nil map lookups safely) - DRY up action deduplication in computeAllActionsForUser with addUniqueActions closure - Add tests for invalid/empty ARN rejection and DeletePolicy identity cleanup Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * feat: add integration tests for managed policy lifecycle (#8506) Add two integration tests covering the user-reported use case where managed policy operations returned 500 errors: - TestS3IAMManagedPolicyLifecycle: end-to-end workflow matching the issue report — CreatePolicy, ListPolicies, GetPolicy, AttachUserPolicy, ListAttachedUserPolicies, idempotent re-attach, DeletePolicy while attached (expects DeleteConflict), DetachUserPolicy, DeletePolicy, and verification that deleted policy is gone - TestS3IAMManagedPolicyErrorCases: covers error paths — nonexistent policy/user for GetPolicy, DeletePolicy, AttachUserPolicy, DetachUserPolicy, and ListAttachedUserPolicies Also fixes DeletePolicy to reject deletion when policy is still attached to a user (AWS-compatible DeleteConflictException), and adds the 409 status code mapping for DeleteConflictException in the error response handler. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fix: nil map panic in CreatePolicy, add PolicyId test assertions - Initialize policies.Policies map in CreatePolicy if nil (prevents panic when no policies exist yet); also handle filer_pb.ErrNotFound like other callers - Add PolicyId assertions in TestGetPolicy and TestListPolicies to lock in the consistent Hash(&policyName) behavior - Remove redundant time.Sleep calls from new integration tests (startMiniCluster already blocks on waitForS3Ready) Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fix: PutUserPolicy and DeleteUserPolicy now preserve managed policy actions PutUserPolicy and DeleteUserPolicy were calling computeAggregatedActionsForUser (inline-only), overwriting ident.Actions and dropping managed policy actions. Both now call computeAllActionsForUser which unions inline + managed actions. Add TestManagedPolicyActionsPreservedAcrossInlineMutations regression test: attaches a managed policy, adds an inline policy (verifies both actions present), deletes the inline policy, then asserts managed policy actions still persist. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fix: PutUserPolicy verifies user exists before persisting inline policy Previously the inline policy was written to storage before checking if the target user exists in s3cfg.Identities, leaving orphaned policy data when the user was absent. Now validates the user first, returning NoSuchEntityException immediately if not found. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * fix: prevent stale/lost actions on computeAllActionsForUser failure - PutUserPolicy: on recomputation failure, preserve existing ident.Actions instead of falling back to only the current inline policy's actions - DeleteUserPolicy: on recomputation failure, preserve existing ident.Actions instead of assigning nil (which wiped all permissions) - AttachUserPolicy: roll back ident.PolicyNames and return error if action recomputation fails, keeping identity consistent - DetachUserPolicy: roll back ident.PolicyNames and return error if GetPolicies or action recomputation fails - Add doc comment on newTestIamApiServer noting it only sets s3ApiConfig Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>	5 days ago
Chris Lu	10a30a83e1	s3api: add GetObjectAttributes API support (#8504 ) * s3api: add error code and header constants for GetObjectAttributes Add ErrInvalidAttributeName error code and header constants (X-Amz-Object-Attributes, X-Amz-Max-Parts, X-Amz-Part-Number-Marker, X-Amz-Delete-Marker) needed by the S3 GetObjectAttributes API. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: implement GetObjectAttributes handler Add GetObjectAttributesHandler that returns selected object metadata (ETag, Checksum, StorageClass, ObjectSize, ObjectParts) without returning the object body. Follows the same versioning and conditional header patterns as HeadObjectHandler. The handler parses the X-Amz-Object-Attributes header to determine which attributes to include in the XML response, and supports ObjectParts pagination via X-Amz-Max-Parts and X-Amz-Part-Number-Marker. Ref: https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectAttributes.html Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: register GetObjectAttributes route Register the GET /{object}?attributes route for the GetObjectAttributes API, placed before other object query routes to ensure proper matching. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: add integration tests for GetObjectAttributes Test coverage: - Basic: simple object with all attribute types - MultipartObject: multipart upload with parts pagination - SelectiveAttributes: requesting only specific attributes - InvalidAttribute: server rejects invalid attribute names - NonExistentObject: returns NoSuchKey for missing objects Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: add versioned object test for GetObjectAttributes Test puts two versions of the same object and verifies that: - GetObjectAttributes returns the latest version by default - GetObjectAttributes with versionId returns the specific version - ObjectSize and VersionId are correct for each version Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: fix combined conditional header evaluation per RFC 7232 Per RFC 7232: - Section 3.4: If-Unmodified-Since MUST be ignored when If-Match is present (If-Match is the more accurate replacement) - Section 3.3: If-Modified-Since MUST be ignored when If-None-Match is present (If-None-Match is the more accurate replacement) Previously, all four conditional headers were evaluated independently. This caused incorrect 412 responses when If-Match succeeded but If-Unmodified-Since failed (should return 200 per AWS S3 behavior). Fix applied to both validateConditionalHeadersForReads (GET/HEAD) and validateConditionalHeaders (PUT) paths. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: add conditional header combination tests for GetObjectAttributes Test the RFC 7232 combined conditional header semantics: - If-Match=true + If-Unmodified-Since=false => 200 (If-Unmodified-Since ignored) - If-None-Match=false + If-Modified-Since=true => 304 (If-Modified-Since ignored) - If-None-Match=true + If-Modified-Since=false => 200 (If-Modified-Since ignored) - If-Match=true + If-Unmodified-Since=true => 200 - If-Match=false => 412 regardless Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: document Checksum attribute as not yet populated Checksum is accepted in validation (so clients requesting it don't get a 400 error, matching AWS behavior for objects without checksums) but SeaweedFS does not yet store S3 checksums. Add a comment explaining this and noting where to populate it when checksum storage is added. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: add s3:GetObjectAttributes IAM action for ?attributes query Previously, GET /{object}?attributes resolved to s3:GetObject via the fallback path since resolveFromQueryParameters had no case for the "attributes" query parameter. Add S3_ACTION_GET_OBJECT_ATTRIBUTES constant ("s3:GetObjectAttributes") and a branch in resolveFromQueryParameters to return it for GET requests with the "attributes" query parameter, so IAM policies can distinguish GetObjectAttributes from GetObject. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: evaluate conditional headers after version resolution Move conditional header evaluation (If-Match, If-None-Match, etc.) to after the version resolution step in GetObjectAttributesHandler. This ensures that when a specific versionId is requested, conditions are checked against the correct version entry rather than always against the latest version. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: use bounded HTTP client in GetObjectAttributes tests Replace http.DefaultClient with a timeout-aware http.Client (10s) in the signedGetObjectAttributes helper and testGetObjectAttributesInvalid to prevent tests from hanging indefinitely. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: check attributes query before versionId in action resolver Move the GetObjectAttributes action check before the versionId check in resolveFromQueryParameters. This fixes GET /bucket/key?attributes&versionId=xyz being incorrectly classified as s3:GetObjectVersion instead of s3:GetObjectAttributes. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: add tests for versioned conditional headers and action resolver Add integration test that verifies conditional headers (If-Match, If-None-Match) are evaluated against the requested version entry, not the latest version. This covers the fix in `55c409dec`. Add unit test for ResolveS3Action verifying that the attributes query parameter takes precedence over versionId, so GET ?attributes&versionId resolves to s3:GetObjectAttributes. This covers the fix in `b92c61c95`. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: guard negative chunk indices and rename PartsCount field Add bounds checks for b.StartChunk >= 0 and b.EndChunk >= 0 in buildObjectAttributesParts to prevent panics from corrupted metadata with negative index values. Rename ObjectAttributesParts.PartsCount to TotalPartsCount to match the AWS SDK v2 Go field naming convention, while preserving the XML element name "PartsCount" via the struct tag. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * s3api: reject malformed max-parts and part-number-marker headers Return ErrInvalidMaxParts and ErrInvalidPartNumberMarker when the X-Amz-Max-Parts or X-Amz-Part-Number-Marker headers contain non-integer or negative values, matching ListObjectPartsHandler behavior. Previously these were silently ignored with defaults. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>	5 days ago
Racci	9e26d6f5dd	fix: port in SNI address when using domainName instead of IP for master (#8500 )	5 days ago
Copilot	e475cbfef8	Merge branch 'master' of https://github.com/seaweedfs/seaweedfs	6 days ago
Copilot	70ed9c2a55	Update plugin_templ.go Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com>	6 days ago
Chris Lu	45ce18266a	Disable master maintenance scripts when admin server runs (#8499 ) * Disable master maintenance scripts when admin server runs * Stop defaulting master maintenance scripts * Apply suggestion from @gemini-code-assist[bot] Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Apply suggestion from @gemini-code-assist[bot] Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Clarify master scripts are disabled by default * Skip master maintenance scripts when admin server is connected * Restore default master maintenance scripts * Document admin server skip for master maintenance scripts --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	6 days ago
Chris Lu	18ccc9b773	Plugin scheduler: sequential iterations with max runtime (#8496 ) * pb: add job type max runtime setting * plugin: default job type max runtime * plugin: redesign scheduler loop * admin ui: update scheduler settings * plugin: fix scheduler loop state name * plugin scheduler: restore backlog skip * plugin scheduler: drop legacy detection helper * admin api: require scheduler config body * admin ui: preserve detection interval on save * plugin scheduler: use job context and drain cancels * plugin scheduler: respect detection intervals * plugin scheduler: gate runs and drain queue * ec test: reuse req/resp vars * ec test: add scheduler debug logs * Adjust scheduler idle sleep and initial run delay * Clear pending job queue before scheduler runs * Log next detection time in EC integration test * Improve plugin scheduler debug logging in EC test * Expose scheduler next detection time * Log scheduler next detection time in EC test * Wake scheduler on config or worker updates * Expose scheduler sleep interval in UI * Fix scheduler sleep save value selection * Set scheduler idle sleep default to 613s * Show scheduler next run time in plugin UI --------- Co-authored-by: Copilot <copilot@github.com>	6 days ago
Chris Lu	e1e5b4a8a6	add admin script worker (#8491 ) * admin: add plugin lock coordination * shell: allow bypassing lock checks * plugin worker: add admin script handler * mini: include admin_script in plugin defaults * admin script UI: drop name and enlarge text * admin script: add default script * admin_script: make run interval configurable * plugin: gate other jobs during admin_script runs * plugin: use last completed admin_script run * admin: backfill plugin config defaults * templ Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * comparable to default version Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * default to run Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * format Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * shell: respect pre-set noLock for fix.replication * shell: add force no-lock mode for admin scripts * volume balance worker already exists Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * admin: expose scheduler status JSON * shell: add sleep command * shell: restrict sleep syntax * Revert "shell: respect pre-set noLock for fix.replication" This reverts commit `2b14e8b826`. * templ Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * fix import Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * less logs Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * Reduce master client logs on canceled contexts * Update mini default job type count --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	6 days ago
Peter Dodd	16f2269a33	feat(filer): lazy metadata pulling (#8454 ) * Add remote storage index for lazy metadata pull Introduces remoteStorageIndex, which maintains a map of filer directory to remote storage client/location, refreshed periodically from the filer's mount mappings. Provides lazyFetchFromRemote, ensureRemoteEntryInFiler, and isRemoteBacked on S3ApiServer as integration points for handler-level work in a follow-up PR. Nothing is wired into the server yet. Made-with: Cursor * Add unit tests for remote storage index and wire field into S3ApiServer Adds tests covering isEmpty, findForPath (including longest-prefix resolution), and isRemoteBacked. Also removes a stray PR review annotation from the index file and adds the remoteStorageIdx field to S3ApiServer so the package compiles ahead of the wiring PR. Made-with: Cursor * Address review comments on remote storage index - Use filer_pb.CreateEntry helper so resp.Error is checked, not just the RPC error - Extract keepPrev closure to remove duplicated error-handling in refresh loop - Add comment explaining availability-over-consistency trade-off on filer save failure Made-with: Cursor * Move lazy metadata pull from S3 API to filer - Add maybeLazyFetchFromRemote in filer: on FindEntry miss, stat remote and CreateEntry when path is under a remote mount - Use singleflight for dedup; context guard prevents CreateEntry recursion - Availability-over-consistency: return in-memory entry if CreateEntry fails - Add longest-prefix test for nested mounts in remote_storage_test.go - Remove remoteStorageIndex, lazyFetchFromRemote, ensureRemoteEntryInFiler, doLazyFetch from s3api; filer now owns metadata operations - Add filer_lazy_remote_test.go with tests for hit, miss, not-found, CreateEntry failure, longest-prefix, and FindEntry integration Made-with: Cursor * Address review: fix context guard test, add FindMountDirectory comment, remove dead code Made-with: Cursor * Nitpicks: restore prev maker in registerStubMaker, instance-scope lazyFetchGroup, nil-check remoteEntry Made-with: Cursor * Fix remotePath when mountDir is root: ensure relPath has leading slash Made-with: Cursor * filer: decouple lazy-fetch persistence from caller context Use context.Background() inside the singleflight closure for CreateEntry so persistence is not cancelled when the winning request's context is cancelled. Fixes CreateEntry failing for all waiters when the first caller times out. Made-with: Cursor * filer: remove redundant Mode bitwise OR with zero Made-with: Cursor * filer: use bounded context for lazy-fetch persistence Replace context.Background() with context.WithTimeout(30s) and defer cancel() to prevent indefinite blocking and release resources. Made-with: Cursor * filer: use checked type assertion for singleflight result Made-with: Cursor * filer: rename persist context vars to avoid shadowing function parameter Made-with: Cursor	6 days ago
Chris Lu	1a3e3100d0	Helm: set serviceAccountName independent of cluster role (#8495 ) * Add stale job expiry and expire API * Add expire job button * helm: decouple serviceAccountName from cluster role --------- Co-authored-by: Copilot <copilot@github.com>	6 days ago
Chris Lu	a61a2affe3	Expire stuck plugin jobs (#8492 ) * Add stale job expiry and expire API * Add expire job button * Add test hook and coverage for ExpirePluginJobAPI * Document scheduler filtering side effect and reuse helper * Restore job spec proposal test * Regenerate plugin template output --------- Co-authored-by: Copilot <copilot@github.com>	7 days ago
Surote	3db05f59f0	Feat: update openshift helm value to support seaweed s3 (#8494 ) feat: update openshift helm values Update helm values for openshift to enable/disable s3 and change log to `emptydir` instead of `hostpath`	7 days ago
Chris Lu	2644816692	helm: avoid duplicate env var keys in workload env lists (#8488 ) * helm: dedupe merged extraEnvironmentVars in workloads * address comments Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * range Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * helm: reuse merge helper for extraEnvironmentVars --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	1 week ago
Chris Lu	fb944f0071	test: add Polaris S3 tables integration tests (#8489 ) * test: add polaris integration test harness * test: add polaris integration coverage * ci: run polaris s3 tables tests * test: harden polaris harness * test: DRY polaris integration tests * ci: pre-pull Polaris image * test: extend Polaris pull timeout * test: refine polaris credentials selection * test: keep Polaris tables inside allowed location * test: use fresh context for polaris cleanup * test: prefer specific Polaris storage credential * test: tolerate Polaris credential variants * test: request Polaris vended credentials * test: load Polaris table credentials * test: allow polaris vended access via bucket policy * test: align Polaris object keys with table location * test: rename Polaris vended role references * test: simplify Polaris vended credential extraction * test: marshal Polaris bucket policy	1 week ago
dependabot[bot]	479da50433	build(deps): bump gocloud.dev/pubsub/natspubsub from 0.44.0 to 0.45.0 (#8487 ) Bumps [gocloud.dev/pubsub/natspubsub](https://github.com/google/go-cloud) from 0.44.0 to 0.45.0. - [Release notes](https://github.com/google/go-cloud/releases) - [Commits](https://github.com/google/go-cloud/compare/v0.44.0...v0.45.0) --- updated-dependencies: - dependency-name: gocloud.dev/pubsub/natspubsub dependency-version: 0.45.0 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	1 week ago
dependabot[bot]	f7909b8ebd	build(deps): bump golang.org/x/oauth2 from 0.34.0 to 0.35.0 (#8486 ) Bumps [golang.org/x/oauth2](https://github.com/golang/oauth2) from 0.34.0 to 0.35.0. - [Commits](https://github.com/golang/oauth2/compare/v0.34.0...v0.35.0) --- updated-dependencies: - dependency-name: golang.org/x/oauth2 dependency-version: 0.35.0 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	1 week ago
dependabot[bot]	2a3ecee28b	build(deps): bump github.com/shirou/gopsutil/v4 from 4.26.1 to 4.26.2 (#8485 ) Bumps [github.com/shirou/gopsutil/v4](https://github.com/shirou/gopsutil) from 4.26.1 to 4.26.2. - [Release notes](https://github.com/shirou/gopsutil/releases) - [Commits](https://github.com/shirou/gopsutil/compare/v4.26.1...v4.26.2) --- updated-dependencies: - dependency-name: github.com/shirou/gopsutil/v4 dependency-version: 4.26.2 dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	1 week ago
dependabot[bot]	f9cf3f3791	build(deps): bump github.com/linkedin/goavro/v2 from 2.14.1 to 2.15.0 (#8484 ) Bumps [github.com/linkedin/goavro/v2](https://github.com/linkedin/goavro) from 2.14.1 to 2.15.0. - [Release notes](https://github.com/linkedin/goavro/releases) - [Commits](https://github.com/linkedin/goavro/compare/v2.14.1...v2.15.0) --- updated-dependencies: - dependency-name: github.com/linkedin/goavro/v2 dependency-version: 2.15.0 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	1 week ago
dependabot[bot]	5d0667221b	build(deps): bump github.com/go-redsync/redsync/v4 from 4.15.0 to 4.16.0 (#8483 ) Bumps [github.com/go-redsync/redsync/v4](https://github.com/go-redsync/redsync) from 4.15.0 to 4.16.0. - [Release notes](https://github.com/go-redsync/redsync/releases) - [Commits](https://github.com/go-redsync/redsync/compare/v4.15.0...v4.16.0) --- updated-dependencies: - dependency-name: github.com/go-redsync/redsync/v4 dependency-version: 4.16.0 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	1 week ago
dependabot[bot]	74593f7065	build(deps): bump actions/upload-artifact from 6 to 7 (#8482 ) Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 6 to 7. - [Release notes](https://github.com/actions/upload-artifact/releases) - [Commits](https://github.com/actions/upload-artifact/compare/v6...v7) --- updated-dependencies: - dependency-name: actions/upload-artifact dependency-version: '7' dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	1 week ago
Chris Lu	340339f678	Add Apache Polaris integration tests (#8478 ) * test: add polaris integration test harness * test: add polaris integration coverage * ci: run polaris s3 tables tests * test: harden polaris harness * test: DRY polaris integration tests * ci: pre-pull Polaris image * test: extend Polaris pull timeout * test: refine polaris credentials selection * test: keep Polaris tables inside allowed location * test: use fresh context for polaris cleanup * test: prefer specific Polaris storage credential * test: tolerate Polaris credential variants * test: request Polaris vended credentials * test: load Polaris table credentials * test: allow polaris vended access via bucket policy * test: align Polaris object keys with table location	1 week ago
dependabot[bot]	2fc47a48ec	build(deps): bump com.fasterxml.jackson.core:jackson-core from 2.18.2 to 2.18.6 in /test/java/spark (#8476 )	1 week ago
dependabot[bot]	623450a0d4	build(deps): bump go.opentelemetry.io/otel/sdk from 1.38.0 to 1.40.0 (#8475 )	1 week ago
Chris Lu	f5c35240be	Add volume dir tags and EC placement priority (#8472 ) * Add volume dir tags to topology Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add preferred tag config for EC Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Prioritize EC destinations by tags Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add EC placement planner tag tests Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Refactor EC placement tests to reuse buildActiveTopology Remove buildActiveTopologyWithDiskTags helper function and consolidate tag setup inline in test cases. Tests now use UpdateTopology to apply tags after topology creation, reusing the existing buildActiveTopology function rather than duplicating its logic. All tag scenario tests pass: - TestECPlacementPlannerPrefersTaggedDisks - TestECPlacementPlannerFallsBackWhenTagsInsufficient Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Consolidate normalizeTagList into shared util package Extract normalizeTagList from three locations (volume.go, detection.go, erasure_coding_handler.go) into new weed/util/tag.go as exported NormalizeTagList function. Replace all duplicate implementations with imports and calls to util.NormalizeTagList. This improves code reuse and maintainability by centralizing tag normalization logic. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add PreferredTags to EC config persistence Add preferred_tags field to ErasureCodingTaskConfig protobuf with field number 5. Update GetConfigSpec to include preferred_tags field in the UI configuration schema. Add PreferredTags to ToTaskPolicy to serialize config to protobuf. Add PreferredTags to FromTaskPolicy to deserialize from protobuf with defensive copy to prevent external mutation. This allows EC preferred tags to be persisted and restored across worker restarts. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add defensive copy for Tags slice in DiskLocation Copy the incoming tags slice in NewDiskLocation instead of storing by reference. This prevents external callers from mutating the DiskLocation.Tags slice after construction, improving encapsulation and preventing unexpected changes to disk metadata. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add doc comment to buildCandidateSets method Document the tiered candidate selection and fallback behavior. Explain that for a planner with preferredTags, it accumulates disks matching each tag in order into progressively larger tiers, emits a candidate set once a tier reaches shardsNeeded, and finally falls back to the full candidates set if preferred-tag tiers are insufficient. This clarifies the intended semantics for future maintainers. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Apply final PR review fixes 1. Update parseVolumeTags to replicate single tag entry to all folders instead of leaving some folders with nil tags. This prevents nil pointer dereferences when processing folders without explicit tags. 2. Add defensive copy in ToTaskPolicy for PreferredTags slice to match the pattern used in FromTaskPolicy, preventing external mutation of the returned TaskPolicy. 3. Add clarifying comment in buildCandidateSets explaining that the shardsNeeded <= 0 branch is a defensive check for direct callers, since selectDestinations guarantees shardsNeeded > 0. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Fix nil pointer dereference in parseVolumeTags Ensure all folder tags are initialized to either normalized tags or empty slices, not nil. When multiple tag entries are provided and there are more folders than entries, remaining folders now get empty slices instead of nil, preventing nil pointer dereference in downstream code. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Fix NormalizeTagList to return empty slice instead of nil Change NormalizeTagList to always return a non-nil slice. When all tags are empty or whitespace after normalization, return an empty slice instead of nil. This prevents nil pointer dereferences in downstream code that expects a valid (possibly empty) slice. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add nil safety check for v.tags pointer Add a safety check to handle the case where v.tags might be nil, preventing a nil pointer dereference. If v.tags is nil, use an empty string instead. This is defensive programming to prevent panics in edge cases. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add volume.tags flag to weed server and weed mini commands Add the volume.tags CLI option to both the 'weed server' and 'weed mini' commands. This allows users to specify disk tags when running the combined server modes, just like they can with 'weed volume'. The flag uses the same format and description as the volume command: comma-separated tag groups per data dir with ':' separators (e.g. fast:ssd,archive). Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	1 week ago
Chris Lu	c5d5b517f6	Add lakekeeper table bucket integration test (#8470 ) * Add lakekeeper table bucket integration test Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Convert lakekeeper table bucket test to Go Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add multipart upload to lakekeeper table bucket test Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Remove lakekeeper test skips Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Convert lakekeeper repro to Go Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	1 week ago
Chris Lu	2dd3944819	Respect -minFreeSpace during ec.decode (#8467 ) * shell: add ec.decode ignoreMinFreeSpace flag Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * shell: respect minFreeSpace in ec.decode Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * shell: rename ec.decode minFreeSpace flag Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * shell: error when ec.decode has no shards Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * shell: select ec.decode target with zero shards Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * shell: adjust free counts across ec.decode Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * unused * Update weed/shell/command_ec_decode.go Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com> --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>	1 week ago
Chris Lu	7354fa87f1	refactor ec shard distribution (#8465 ) * refactor ec shard distribution * fix shard assignment merge and mount errors * fix mount error aggregation scope * make WithFields compatible and wrap errors	1 week ago
Chris Lu	e8946e59ca	fix(s3api): correctly extract host header port in extractHostHeader (#8464 ) * Prevent concurrent maintenance tasks per volume * fix panic * fix(s3api): correctly extract host header port when X-Forwarded-Port is present * test(s3api): add test cases for misreported X-Forwarded-Port	1 week ago
Chris Lu	b9e560dcf1	Prevent overlapping maintenance tasks per volume (#8463 ) * Prevent concurrent maintenance tasks per volume * fix panic	1 week ago
Chris Lu	4f647e1036	Worker set its working directory (#8461 ) * set working directory * consolidate to worker directory * working directory * correct directory name * refactoring to use wildcard matcher * simplify * cleaning ec working directory * fix reference * clean * adjust test	1 week ago

1 2 3 4 5 ...

13045 Commits (72c2c7ef8bd5de3e976e1af5170221a40c534158) All Branches Search

13045 Commits (72c2c7ef8bd5de3e976e1af5170221a40c534158)

All Branches