seaweedfs

Commit Graph

Author	SHA1	Message	Date
Chris Lu	03fc9ce32c	Align admin metrics exposure with Go	4 days ago
Chris Lu	fb714df9d8	docs: record latest parity fixes	4 days ago
Chris Lu	e918cf9bd5	http: match Go bool parsing for dl	4 days ago
Chris Lu	f3d4a39b27	http: honor multipart upload metadata fields	4 days ago
Chris Lu	0f9232d24e	grpc: return stored ttl in volume needle status	4 days ago
Chris Lu	19cae83455	docs: refresh rust volume parity execution plan	5 days ago
Chris Lu	6cd67c53e0	grpc: match Go ping behavior for filer targets	5 days ago
Chris Lu	2a840ae8ab	http: align status payload with Go volume server	5 days ago
Chris Lu	ca646b87a9	storage: match default Go idx offset width	5 days ago
Chris Lu	eaff0e074c	test: rebuild rust volume binary per test run	5 days ago
Chris Lu	68d31c9bac	test: rebuild weed binary per test process	5 days ago
Chris Lu	d18b5f3c70	test: use clap-compatible flags for rust volume	5 days ago
Chris Lu	220bb91bc6	test: detect seaweed-volume crate for rust harness	5 days ago
Chris Lu	37bb6bda49	Merge branch 'master' into rust-volume-server	5 days ago
Chris Lu	6b2b442450	iceberg: detect maintenance work per operation (#8639 ) * iceberg: detect maintenance work per operation * iceberg: ignore delete manifests during detection * iceberg: clean up detection maintenance planning * iceberg: tighten detection manifest heuristics * Potential fix for code scanning alert no. 330: Incorrect conversion between integer types Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * iceberg: tolerate per-operation detection errors * iceberg: fix fake metadata location versioning * iceberg: check snapshot expiry before manifest loads * iceberg: make expire-snapshots switch case explicit --------- Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com>	5 days ago
Chris Lu	a00eddb525	Iceberg table maintenance Phase 3: multi-spec compaction, delete handling, and metrics (#8643 ) * Add multi-partition-spec compaction and delete-aware compaction (Phase 3) Multi-partition-spec compaction: - Add SpecID to compactionBin struct and group by spec+partition key - Remove the len(specIDs) > 1 skip that blocked spec-evolved tables - Write per-spec manifests in compaction commit using specByID map - Use per-bin PartitionSpec when calling NewDataFileBuilder Delete-aware compaction: - Add ApplyDeletes config (default: true) with readBoolConfig helper - Implement position delete collection (file_path + pos Parquet columns) - Implement equality delete collection (field ID to column mapping) - Update mergeParquetFiles to filter rows via position deletes (binary search) and equality deletes (hash set lookup) - Smart delete manifest carry-forward: drop when all data files compacted - Fix EXISTING/DELETED entries to include sequence numbers Tests for multi-spec bins, delete collection, merge filtering, and end-to-end compaction with position/equality/mixed deletes. * Add structured metrics and per-bin progress to iceberg maintenance - Change return type of all four operations from (string, error) to (string, map[string]int64, error) with structured metric counts (files_merged, snapshots_expired, orphans_removed, duration_ms, etc.) - Add onProgress callback to compactDataFiles for per-bin progress - In Execute, pass progress callback that sends JobProgressUpdate with per-bin stage messages - Accumulate per-operation metrics with dot-prefixed keys (e.g. compact.files_merged) into OutputValues on completion - Update testing_api.go wrappers and integration test call sites - Add tests: TestCompactDataFilesMetrics, TestExpireSnapshotsMetrics, TestExecuteCompletionOutputValues * Address review feedback: group equality deletes by field IDs, use metric constants - Group equality deletes by distinct equality_ids sets so different delete files with different equality columns are handled correctly - Use length-prefixed type-aware encoding in buildEqualityKey to avoid ambiguity between types and collisions from null bytes - Extract metric key strings into package-level constants * Fix buildEqualityKey to use length-prefixed type-aware encoding The previous implementation used plain String() concatenation with null byte separators, which caused type ambiguity (int 123 vs string "123") and separator collisions when values contain null bytes. Now each value is serialized as "kind:length:value" for unambiguous composite keys. This fix was missed in the prior cherry-pick due to a merge conflict. * Address nitpick review comments - Document patchManifestContentToDeletes workaround: explain that iceberg-go WriteManifest cannot create delete manifests, and note the fail-fast validation on pattern match - Document makeTestEntries: note that specID field is ignored and callers should use makeTestEntriesWithSpec for multi-spec testing * fmt * Fix path normalization, manifest threshold, and artifact filename collisions - Normalize file paths in position delete collection and lookup so that absolute S3 URLs and relative paths match correctly - Fix rewriteManifests threshold check to count only data manifests (was including delete manifests in the count and metric) - Add random suffix to artifact filenames in compactDataFiles and rewriteManifests to prevent collisions between concurrent runs - Sort compaction bins by SpecID then PartitionKey for deterministic ordering across specs * Fix pos delete read, deduplicate column resolution, minor cleanups - Remove broken Column() guard in position delete reading that silently defaulted pos to 0; unconditionally extract Int64() instead - Deduplicate column resolution in readEqualityDeleteFile by calling resolveEqualityColIndices instead of inlining the same logic - Add warning log in readBoolConfig for unrecognized string values - Fix CompactDataFiles call site in integration test to capture 3 return values * Advance progress on all bins, deterministic manifest order, assert metrics - Call onProgress for every bin iteration including skipped/failed bins so progress reporting never appears stalled - Sort spec IDs before iterating specEntriesMap to produce deterministic manifest list ordering across runs - Assert expected metric keys in CompactDataFiles integration test --------- Co-authored-by: Copilot <copilot@github.com>	5 days ago
Chris Lu	e24630251c	iceberg: handle filer-backed compaction inputs (#8638 ) * iceberg: handle filer-backed compaction inputs * iceberg: preserve upsert creation times * iceberg: align compaction test schema * iceberg: tighten compact output assertion * iceberg: document compact output match * iceberg: clear stale chunks in upsert helper * iceberg: strengthen compaction integration coverage	5 days ago
Chris Lu	0afc675a55	iceberg: validate filer failover targets (#8637 ) * iceberg: validate filer failover targets * iceberg: tighten filer liveness checks * iceberg: relax filer test readiness deadline	5 days ago
Chris Lu	b868980260	fix(remote): don't send empty StorageClass in S3 uploads (#8645 ) When S3StorageClass is empty (the default), aws.String("") was passed as the StorageClass in PutObject requests. While AWS S3 treats this as "use default," S3-compatible providers (e.g. SharkTech) reject it with InvalidStorageClass. Only set StorageClass when a non-empty value is configured, letting the provider use its default. Fixes #8644	5 days ago
Chris Lu	5f19e3259f	iceberg: keep split bins within target size (#8640 )	5 days ago
Chris Lu	d9d6707401	Change iceberg compaction target file size config from bytes to MB (#8636 ) Change iceberg target_file_size config from bytes to MB Rename the config field from target_file_size_bytes to target_file_size_mb with a default of 256 (MB). The value is converted to bytes internally. This makes the config more user-friendly — entering 256 is clearer than 268435456. Co-authored-by: Copilot <copilot@github.com>	5 days ago
Chris Lu	8cde3d4486	Add data file compaction to iceberg maintenance (Phase 2) (#8503 ) * Add iceberg_maintenance plugin worker handler (Phase 1) Implement automated Iceberg table maintenance as a new plugin worker job type. The handler scans S3 table buckets for tables needing maintenance and executes operations in the correct Iceberg order: expire snapshots, remove orphan files, and rewrite manifests. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add data file compaction to iceberg maintenance handler (Phase 2) Implement bin-packing compaction for small Parquet data files: - Enumerate data files from manifests, group by partition - Merge small files using parquet-go (read rows, write merged output) - Create new manifest with ADDED/DELETED/EXISTING entries - Commit new snapshot with compaction metadata Add 'compact' operation to maintenance order (runs before expire_snapshots), configurable via target_file_size_bytes and min_input_files thresholds. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix memory exhaustion in mergeParquetFiles by processing files sequentially Previously all source Parquet files were loaded into memory simultaneously, risking OOM when a compaction bin contained many small files. Now each file is loaded, its rows are streamed into the output writer, and its data is released before the next file is loaded — keeping peak memory proportional to one input file plus the output buffer. * Validate bucket/namespace/table names against path traversal Reject names containing '..', '/', or '\' in Execute to prevent directory traversal via crafted job parameters. * Add filer address failover in iceberg maintenance handler Try each filer address from cluster context in order instead of only using the first one. This improves resilience when the primary filer is temporarily unreachable. * Add separate MinManifestsToRewrite config for manifest rewrite threshold The rewrite_manifests operation was reusing MinInputFiles (meant for compaction bin file counts) as its manifest count threshold. Add a dedicated MinManifestsToRewrite field with its own config UI section and default value (5) so the two thresholds can be tuned independently. * Fix risky mtime fallback in orphan removal that could delete new files When entry.Attributes is nil, mtime defaulted to Unix epoch (1970), which would always be older than the safety threshold, causing the file to be treated as eligible for deletion. Skip entries with nil Attributes instead, matching the safer logic in operations.go. * Fix undefined function references in iceberg_maintenance_handler.go Use the exported function names (ShouldSkipDetectionByInterval, BuildDetectorActivity, BuildExecutorActivity) matching their definitions in vacuum_handler.go. * Remove duplicated iceberg maintenance handler in favor of iceberg/ subpackage The IcebergMaintenanceHandler and its compaction code in the parent pluginworker package duplicated the logic already present in the iceberg/ subpackage (which self-registers via init()). The old code lacked stale-plan guards, proper path normalization, CAS-based xattr updates, and error-returning parseOperations. Since the registry pattern (default "all") makes the old handler unreachable, remove it entirely. All functionality is provided by iceberg.Handler with the reviewed improvements. * Fix MinManifestsToRewrite clamping to match UI minimum of 2 The clamp reset values below 2 to the default of 5, contradicting the UI's advertised MinValue of 2. Clamp to 2 instead. * Sort entries by size descending in splitOversizedBin for better packing Entries were processed in insertion order which is non-deterministic from map iteration. Sorting largest-first before the splitting loop improves bin packing efficiency by filling bins more evenly. * Add context cancellation check to drainReader loop The row-streaming loop in drainReader did not check ctx between iterations, making long compaction merges uncancellable. Check ctx.Done() at the top of each iteration. * Fix splitOversizedBin to always respect targetSize limit The minFiles check in the split condition allowed bins to grow past targetSize when they had fewer than minFiles entries, defeating the OOM protection. Now bins always split at targetSize, and a trailing runt with fewer than minFiles entries is merged into the previous bin. * Add integration tests for iceberg table maintenance plugin worker Tests start a real weed mini cluster, create S3 buckets and Iceberg table metadata via filer gRPC, then exercise the iceberg.Handler operations (ExpireSnapshots, RemoveOrphans, RewriteManifests) against the live filer. A full maintenance cycle test runs all operations in sequence and verifies metadata consistency. Also adds exported method wrappers (testing_api.go) so the integration test package can call the unexported handler methods. * Fix splitOversizedBin dropping files and add source path to drainReader errors The runt-merge step could leave leading bins with fewer than minFiles entries (e.g. [80,80,10,10] with targetSize=100, minFiles=2 would drop the first 80-byte file). Replace the filter-based approach with an iterative merge that folds any sub-minFiles bin into its smallest neighbor, preserving all eligible files. Also add the source file path to drainReader error messages so callers can identify which Parquet file caused a read/write failure. * Harden integration test error handling - s3put: fail immediately on HTTP 4xx/5xx instead of logging and continuing - lookupEntry: distinguish NotFound (return nil) from unexpected RPC errors (fail the test) - writeOrphan and orphan creation in FullMaintenanceCycle: check CreateEntryResponse.Error in addition to the RPC error * go fmt --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>	5 days ago
Chris Lu	47799a5b4f	fix tests	5 days ago
mtmn	c9100a7213	fix(grafana): unify `datasource` usage in `grafana_seaweedfs.json` (#8635 ) Some panels were using `Prometheus` instead of `${DS_PROMETHEUS}` which caused missing data when other sources (e.g. VictoriaMetrics) are in use.	5 days ago
Chris Lu	1f2014568f	fix(mini): use "all" job type for plugin worker (#8634 ) The mini command previously hardcoded a list of specific job types (vacuum, volume_balance, erasure_coding, admin_script). Use the "all" category instead so that newly registered handlers are automatically picked up without requiring changes to the mini command.	6 days ago
Chris Lu	a838661b83	feat(plugin): EC shard balance handler for plugin worker (#8629 ) * feat(ec_balance): add TaskTypeECBalance constant and protobuf definitions Add the ec_balance task type constant to both topology and worker type systems. Define EcBalanceTaskParams, EcShardMoveSpec, and EcBalanceTaskConfig protobuf messages for EC shard balance operations. * feat(ec_balance): add configuration for EC shard balance task Config includes imbalance threshold, min server count, collection filter, disk type, and preferred tags for tag-aware placement. * feat(ec_balance): add multi-phase EC shard balance detection algorithm Implements four detection phases adapted from the ec.balance shell command: 1. Duplicate shard detection and removal proposals 2. Cross-rack shard distribution balancing 3. Within-rack node-level shard balancing 4. Global shard count equalization across nodes Detection is side-effect-free: it builds an EC topology view from ActiveTopology and generates move proposals without executing them. * feat(ec_balance): add EC shard move task execution Implements the shard move sequence using the same VolumeEcShardsCopy, VolumeEcShardsMount, VolumeEcShardsUnmount, and VolumeEcShardsDelete RPCs as the shell ec.balance command. Supports both regular shard moves and dedup-phase deletions (unmount+delete without copy). * feat(ec_balance): add task registration and scheduling Register EC balance task definition with auto-config update support. Scheduling respects max concurrent limits and worker capabilities. * feat(ec_balance): add plugin handler for EC shard balance Implements the full plugin handler with detection, execution, admin and worker config forms, proposal building, and decision trace reporting. Supports collection/DC/disk type filtering, preferred tag placement, and configurable detection intervals. Auto-registered via init() with the handler registry. * test(ec_balance): add tests for detection algorithm and plugin handler Detection tests cover: duplicate shard detection, cross-rack imbalance, within-rack imbalance, global rebalancing, topology building, collection filtering, and edge cases. Handler tests cover: config derivation with clamping, proposal building, protobuf encode/decode round-trip, fallback parameter decoding, capability, and config policy round-trip. * fix(ec_balance): address PR review feedback and fix CI test failure - Update TestWorkerDefaultJobTypes to expect 6 handlers (was 5) - Extract threshold constants (ecBalanceMinImbalanceThreshold, etc.) to eliminate magic numbers in Descriptor and config derivation - Remove duplicate ShardIdsToUint32 helper (use erasure_coding package) - Add bounds checks for int64→int/uint32 conversions to fix CodeQL integer conversion warnings * fix(ec_balance): address code review findings storage_impact.go: - Add TaskTypeECBalance case returning shard-level reservation (ShardSlots: -1/+1) instead of falling through to default which incorrectly reserves a full volume slot on target. detection.go: - Use dc:rack composite key to avoid cross-DC rack name collisions. Only create rack entries after confirming node has matching disks. - Add exceedsImbalanceThreshold check to cross-rack, within-rack, and global phases so trivial skews below the configured threshold are ignored. Dedup phase always runs since duplicates are errors. - Reserve destination capacity after each planned move (decrement destNode.freeSlots, update rackShardCount/nodeShardCount) to prevent overbooking the same destination. - Skip nodes with freeSlots <= 0 when selecting minNode in global balance to avoid proposing moves to full nodes. - Include loop index and source/target node IDs in TaskID to guarantee uniqueness across moves with the same volumeID/shardID. ec_balance_handler.go: - Fail fast with error when shard_id is absent in fallback parameter decoding instead of silently defaulting to shard 0. ec_balance_task.go: - Delegate GetProgress() to BaseTask.GetProgress() so progress updates from ReportProgressWithStage are visible to callers. - Add fail-fast guard rejecting multiple sources/targets until batch execution is implemented. Findings verified but not changed (matches existing codebase pattern in vacuum/balance/erasure_coding handlers): - register.go globalTaskDef.Config race: same unsynchronized pattern in all 4 task packages. - CreateTask using generated ID: same fmt.Sprintf pattern in all 4 task packages. * fix(ec_balance): harden parameter decoding, progress tracking, and validation ec_balance_handler.go (decodeECBalanceTaskParams): - Validate execution-critical fields (Sources[0].Node, ShardIds, Targets[0].Node, ShardIds) after protobuf deserialization. - Require source_disk_id and target_disk_id in legacy fallback path so Targets[0].DiskId is populated for VolumeEcShardsCopyRequest. - All error messages reference decodeECBalanceTaskParams and the specific missing field (TaskParams, shard_id, Targets[0].DiskId, EcBalanceTaskParams) for debuggability. ec_balance_task.go: - Track progress in ECBalanceTask.progress field, updated via reportProgress() helper called before ReportProgressWithStage(), so GetProgress() returns real stage progress instead of stale 0. - Validate: require exactly 1 source and 1 target (mirrors Execute guard), require ShardIds on both, with error messages referencing ECBalanceTask.Validate and the specific field. * fix(ec_balance): fix dedup execution path, stale topology, collection filter, timeout, and dedupeKey detection.go: - Dedup moves now set target=source so isDedupPhase() triggers the unmount+delete-only execution path instead of attempting a copy. - Apply moves to in-memory topology between phases via applyMovesToTopology() so subsequent phases see updated shard placement and don't conflict with already-planned moves. - detectGlobalImbalance now accepts allowedVids and filters both shard counting and shard selection to respect CollectionFilter. ec_balance_task.go: - Apply EcBalanceTaskParams.TimeoutSeconds to the context via context.WithTimeout so all RPC operations respect the configured timeout instead of hanging indefinitely. ec_balance_handler.go: - Include source node ID in dedupeKey so dedup deletions from different source nodes for the same shard aren't collapsed. - Clamp minServerCountRaw and minIntervalRaw lower bounds on int64 before narrowing to int, preventing undefined overflow on 32-bit. * fix(ec_balance): log warning before cancelling on progress send failure Log the error, job ID, job type, progress percentage, and stage before calling execCancel() in the progress callback so failed progress sends are diagnosable instead of silently cancelling.	6 days ago
Chris Lu	c4d642b8aa	fix(ec): gather shards from all disk locations before rebuild (#8633 ) * fix(ec): gather shards from all disk locations before rebuild (#8631) Fix "too few shards given" error during ec.rebuild on multi-disk volume servers. The root cause has two parts: 1. VolumeEcShardsRebuild only looked at a single disk location for shard files. On multi-disk servers, the existing local shards could be on one disk while copied shards were placed on another, causing the rebuild to see fewer shards than actually available. 2. VolumeEcShardsCopy had a DiskId condition (req.DiskId == 0 && len(vs.store.Locations) > 0) that was always true, making the FindFreeLocation fallback dead code. This meant copies always went to Locations[0] regardless of where existing shards were. Changes: - VolumeEcShardsRebuild now finds the location with the most shards, then gathers shard files from other locations via hard links (or symlinks for cross-device) before rebuilding. Gathered files are cleaned up after rebuild. - VolumeEcShardsCopy now only uses Locations[DiskId] when DiskId > 0 (explicitly set). Otherwise, it prefers the location that already has the EC volume, falling back to HDD then any free location. - generateMissingEcFiles now logs shard counts and provides a clear error message when not enough shards are found, instead of passing through to the opaque reedsolomon "too few shards given" error. * fix(ec): update test to match skip behavior for unrepairable volumes The test expected an error for volumes with insufficient shards, but commit `5acb4578a` changed unrepairable volumes to be skipped with a log message instead of returning an error. Update the test to verify the skip behavior and log output. * fix(ec): address PR review comments - Add comment clarifying DiskId=0 means "not specified" (protobuf default), callers must use DiskId >= 1 to target a specific disk. - Log warnings on cleanup failures for gathered shard links. * fix(ec): read shard files from other disks directly instead of linking Replace the hard link / symlink gathering approach with passing additional search directories into RebuildEcFiles. The rebuild function now opens shard files directly from whichever disk they live on, avoiding filesystem link operations and cleanup. RebuildEcFiles and RebuildEcFilesWithContext gain a variadic additionalDirs parameter (backward compatible with existing callers). * fix(ec): clarify DiskId selection semantics in VolumeEcShardsCopy comment * fix(ec): avoid empty files on failed rebuild; don't skip ecx-only locations - generateMissingEcFiles: two-pass approach — first discover present/missing shards and check reconstructability, only then create output files. This avoids leaving behind empty truncated shard files when there are too few shards to rebuild. - VolumeEcShardsRebuild: compute hasEcx before skipping zero-shard locations. A location with an .ecx file but no shard files (all shards on other disks) is now a valid rebuild candidate instead of being silently skipped. * fix(ec): select ecx-only location as rebuildLocation when none chosen yet When rebuildLocation is nil and a location has hasEcx=true but existingShardCount=0 (all shards on other disks), the condition 0 > 0 was false so it was never promoted to rebuildLocation. Add rebuildLocation == nil to the predicate so the first location with an .ecx file is always selected as a candidate.	6 days ago
Chris Lu	5acb4578ab	Fix ec.rebuild failing on unrepairable volumes instead of skipping (#8632 ) * Fix ec.rebuild failing on unrepairable volumes instead of skipping them When an EC volume has fewer shards than DataShardsCount, ec.rebuild would return an error and abort the entire operation. Now it logs a warning and continues rebuilding the remaining volumes. Fixes #8630 * Remove duplicate volume ID in unrepairable log message --------- Co-authored-by: Copilot <copilot@github.com>	6 days ago
Chris Lu	2f51a94416	feat(vacuum): add volume state and location filters to vacuum handler (#8625 ) * feat(vacuum): add volume state, location, and enhanced collection filters Align the vacuum handler's admin config with the balance handler by adding: - volume_state filter (ALL/ACTIVE/FULL) to scope vacuum to writable or read-only volumes - data_center_filter, rack_filter, node_filter to scope vacuum to specific infrastructure locations - Enhanced collection_filter description matching the balance handler's ALL_COLLECTIONS/EACH_COLLECTION/regex modes The new filters reuse filterMetricsByVolumeState() and filterMetricsByLocation() already defined in the same package. * use wildcard matchers for DC/rack/node filters Replace exact-match and CSV set lookups with wildcard matching from util/wildcard package. Patterns like "dc", "rack-1?", or "node-a" are now supported in all location filter fields for both balance and vacuum handlers. * add nil guard in filterMetricsByLocation	7 days ago
Chris Lu	6fc0489dd8	feat(plugin): make page tabs and sub-tabs addressable by URLs (#8626 ) * feat(plugin): make page tabs and sub-tabs addressable by URLs Update the plugin page so that clicking tabs and sub-tabs pushes browser history via history.pushState(), enabling bookmarkable URLs, browser back/forward navigation, and shareable links. URL mapping: - /plugin → Overview tab - /plugin/configuration → Configuration sub-tab - /plugin/detection → Job Detection sub-tab - /plugin/queue → Job Queue sub-tab - /plugin/execution → Job Execution sub-tab Job-type-specific URLs use the ?job= query parameter (e.g., /plugin/configuration?job=vacuum) so that a specific job type tab is pre-selected on page load. Changes: - Add initialJob parameter to Plugin() template and handler - Extract ?job= query param in renderPluginPage handler - Add buildPluginURL/updateURL helpers in JavaScript - Push history state on top-tab, sub-tab, and job-type clicks - Listen for popstate to restore tab state on back/forward - Replace initial history entry on page load via replaceState * make popstate handler async with proper error handling Await loadDescriptorAndConfig so data loading completes before rendering dependent views. Log errors instead of silently swallowing them.	7 days ago
Chris Lu	baae672b6f	feat: auto-disable master vacuum when plugin worker is active (#8624 ) * feat: auto-disable master vacuum when plugin vacuum worker is active When a vacuum-capable plugin worker connects to the admin server, the admin server calls DisableVacuum on the master to prevent the automatic scheduled vacuum from conflicting with the plugin worker's vacuum. When the worker disconnects, EnableVacuum is called to restore the default behavior. A safety net in the topology refresh loop re-enables vacuum if the admin server disconnects without cleanup. * rename isAdminServerConnected to isAdminServerConnectedFunc * add 5s timeout to DisableVacuum/EnableVacuum gRPC calls Prevents the monitor goroutine from blocking indefinitely if the master is unresponsive. * track plugin ownership of vacuum disable to avoid overriding operator - Add vacuumDisabledByPlugin flag to Topology, set when DisableVacuum is called while admin server is connected (i.e., by plugin monitor) - Safety net only re-enables vacuum when it was disabled by plugin, not when an operator intentionally disabled it via shell command - EnableVacuum clears the plugin flag * extract syncVacuumState for testability, add fake toggler tests Extract the single sync step into syncVacuumState() with a vacuumToggler interface. Add TestSyncVacuumState with a fake toggler that verifies disable/enable calls on state transitions. * use atomic.Bool for isDisableVacuum and vacuumDisabledByPlugin Both fields are written by gRPC handlers and read by the vacuum goroutine, causing a data race. Use atomic.Bool with Store/Load for thread-safe access. * use explicit by_plugin field instead of connection heuristic Add by_plugin bool to DisableVacuumRequest proto so the caller declares intent explicitly. The admin server monitor sets it to true; shell commands leave it false. This prevents an operator's intentional disable from being auto-reversed by the safety net. * use setter for admin server callback instead of function parameter Move isAdminServerConnected from StartRefreshWritableVolumes parameter to Topology.SetAdminServerConnectedFunc() setter. Keeps the function signature stable and decouples the topology layer from the admin server concept. * suppress repeated log messages on persistent sync failures Add retrying parameter to syncVacuumState so the initial state transition is logged at V(0) but subsequent retries of the same transition are silent until the call succeeds. * clear plugin ownership flag on manual DisableVacuum Prevents stale plugin flag from causing incorrect auto-enable when an operator manually disables vacuum after a plugin had previously disabled it. * add by_plugin to EnableVacuumRequest for symmetric ownership tracking Plugin-driven EnableVacuum now only re-enables if the plugin was the one that disabled it. If an operator manually disabled vacuum after the plugin, the plugin's EnableVacuum is a no-op. This prevents the plugin monitor from overriding operator intent on worker disconnect. * use cancellable context for monitorVacuumWorker goroutine Replace context.Background() with a cancellable context stored as bgCancel on AdminServer. Shutdown() calls bgCancel() so monitorVacuumWorker exits cleanly via ctx.Done(). * track operator and plugin vacuum disables independently Replace single isDisableVacuum flag with two independent flags: vacuumDisabledByOperator and vacuumDisabledByPlugin. Each caller only flips its own flag. The effective disabled state is the OR of both. This prevents a plugin connect/disconnect cycle from overriding an operator's manual disable, and vice versa. * fix safety net to clear plugin flag, not operator flag The safety net should call EnableVacuumByPlugin() to clear only the plugin disable flag when the admin server disconnects. The previous call to EnableVacuum() incorrectly cleared the operator flag instead.	7 days ago
Chris Lu	89ccb6d825	use constants	7 days ago
Chris Lu	f48725a31d	add more tests	7 days ago
Chris Lu	8056b702ba	feat(balance): replica placement validation for volume moves (#8622 ) * feat(balance): add replica placement validation for volume moves When the volume balance detection proposes moving a volume, validate that the move does not violate the volume's replication policy (e.g., ReplicaPlacement=010 requires replicas on different racks). If the preferred destination violates the policy, fall back to score-based planning; if that also violates, skip the volume entirely. - Add ReplicaLocation type and VolumeReplicaMap to ClusterInfo - Build replica map from all volumes before collection filtering - Port placement validation logic from command_volume_fix_replication.go - Thread replica map through collectVolumeMetrics call chain - Add IsGoodMove check in createBalanceTask before destination use * address PR review: extract validation closure, add defensive checks - Extract validateMove closure to eliminate duplicated ReplicaLocation construction and IsGoodMove calls - Add defensive check for empty replica map entries (len(replicas) == 0) - Add bounds check for int-to-byte cast on ExpectedReplicas (0-255) * address nitpick: rp test helper accepts testing.T and fails on error Prevents silent failures from typos in replica placement codes. address review: add composite replica placement tests (011, 110) Test multi-constraint placement policies where both rack and DC rules must be satisfied simultaneously. * address review: use struct keys instead of string concatenation Replace string-concatenated map keys with typed rackKey/nodeKey structs to eliminate allocations and avoid ambiguity if IDs contain spaces. * address review: simplify bounds check, log fallback error, guard source - Remove unreachable ExpectedReplicas < 0 branch (outer condition already guarantees > 0), fold bounds check into single condition - Log error from planBalanceDestination in replica validation fallback - Return false from IsGoodMove when sourceNodeID not found in existing replicas (inconsistent cluster state) * address review: use slices.Contains instead of hand-rolled helpers Replace isAmongDC and isAmongRack with slices.Contains from the standard library, reducing boilerplate.	7 days ago
Chris Lu	47ddf05d95	feat(plugin): DC/rack/node filtering for volume balance (#8621 ) * feat(plugin): add DC/rack/node filtering for volume balance detection Add scoping filters so balance detection can be limited to specific data centers, racks, or nodes. Filters are applied both at the metrics level (in the handler) and at the topology seeding level (in detection) to ensure only the targeted infrastructure participates in balancing. * address PR review: use set lookups, deduplicate test helpers, add target checks * address review: assert non-empty tasks in filter tests Prevent vacuous test passes by requiring len(tasks) > 0 before checking source/target exclusions. * address review: enforce filter scope in fallback, clarify DC filter - Thread allowedServers into createBalanceTask so the fallback planner cannot produce out-of-scope targets when DC/rack/node filters are active - Update data_center_filter description to clarify single-DC usage * address review: centralize parseCSVSet, fix filter scope leak, iterate all targets - Extract ParseCSVSet to shared weed/worker/tasks/util package, remove duplicates from detection.go and volume_balance_handler.go - Fix metric accumulation re-introducing filtered-out servers by only counting metrics for servers that passed DC/rack/node filters - Trim DataCenterFilter before matching to handle trailing spaces - Iterate all task.TypedParams.Targets in filter tests, not just [0] * remove useless descriptor string test	7 days ago
Chris Lu	00ce1c6eba	feat(plugin): enhanced collection filtering for volume balance (#8620 ) * feat(plugin): enhanced collection filtering for volume balance Replace wildcard matching with three collection filter modes: - ALL_COLLECTIONS (default): treat all volumes as one pool - EACH_COLLECTION: run detection separately per collection - Regex pattern: filter volumes by matching collection names The EACH_COLLECTION mode extracts distinct collections from metrics and calls Detection() per collection, sharing the maxResults budget and clusterInfo (with ActiveTopology) across all calls. * address PR review: fix wildcard→regexp replacement, optimize EACH_COLLECTION * address nitpick: fail fast on config errors (invalid regex) Add configError type so invalid collection_filter regex returns immediately instead of retrying across all masters with the same bad config. Transient errors still retry. * address review: constants, unbounded maxResults, wildcard compat - Define collectionFilterAll/collectionFilterEach constants to eliminate magic strings across handler and metrics code - Fix EACH_COLLECTION budget loop to treat maxResults <= 0 as unbounded, matching Detection's existing semantics - Treat "" as ALL_COLLECTIONS for backward compat with wildcard address review: nil guard in EACH_COLLECTION grouping loop * remove useless descriptor string test	7 days ago
Lars Lehtonen	577a8459c9	fix(mount): return dropped error (#8623 )	7 days ago
Chris Lu	34fe289f32	feat(balance): add volume state filter (ALL/ACTIVE/FULL) (#8619 ) * feat(balance): add volume state filter (ALL/ACTIVE/FULL) Add a volume_state admin config field to the plugin worker volume balance handler, matching the shell's -volumeBy flag. This allows filtering volumes by state before balance detection: - ALL (default): consider all volumes - ACTIVE: only writable volumes below the size limit (FullnessRatio < 1.01) - FULL: only read-only volumes above the size limit (FullnessRatio >= 1.01) The 1.01 threshold mirrors the shell's thresholdVolumeSize constant. * address PR review: use enum/select widget, switch-based filter, nil safety - Change volume_state field from string/text to enum/select with dropdown options (ALL, ACTIVE, FULL) - Refactor filterMetricsByVolumeState to use switch with predicate function for clearer extensibility - Add nil-check guard to prevent panic on nil metric elements - Add TestFilterMetricsByVolumeState_NilElement regression test	7 days ago
Lukas Kallies	729df9c375	Update admin UI secret example to match (#8618 )	1 week ago
Chris Lu	f3c5ba3cd6	feat(filer): add lazy directory listing for remote mounts (#8615 ) * feat(filer): add lazy directory listing for remote mounts Directory listings on remote mounts previously only queried the local filer store. With lazy mounts the listing was empty; with eager mounts it went stale over time. Add on-demand directory listing that fetches from remote and caches results with a 5-minute TTL: - Add `ListDirectory` to `RemoteStorageClient` interface (delimiter-based, single-level listing, separate from recursive `Traverse`) - Implement in S3, GCS, and Azure backends using each platform's hierarchical listing API - Add `maybeLazyListFromRemote` to filer: before each directory listing, check if the directory is under a remote mount with an expired cache, fetch from remote, persist entries to the local store, then let existing listing logic run on the populated store - Use singleflight to deduplicate concurrent requests for the same directory - Skip local-only entries (no RemoteEntry) to avoid overwriting unsynced uploads - Errors are logged and swallowed (availability over consistency) * refactor: extract xattr key to constant xattrRemoteListingSyncedAt * feat: make listing cache TTL configurable per mount via listing_cache_ttl_seconds Add listing_cache_ttl_seconds field to RemoteStorageLocation protobuf. When 0 (default), lazy directory listing is disabled for that mount. When >0, enables on-demand directory listing with the specified TTL. Expose as -listingCacheTTL flag on remote.mount command. * refactor: address review feedback for lazy directory listing - Add context.Context to ListDirectory interface and all implementations - Capture startTime before remote call for accurate TTL tracking - Simplify S3 ListDirectory using ListObjectsV2PagesWithContext - Make maybeLazyListFromRemote return void (errors always swallowed) - Remove redundant trailing-slash path manipulation in caller - Update tests to match new signatures * When an existing entry has Remote != nil, we should merge remote metadata into it rather than replacing it. * fix(gcs): wrap ListDirectory iterator error with context The raw iterator error was returned without bucket/path context, making it harder to debug. Wrap it consistently with the S3 pattern. * fix(s3): guard against nil pointer dereference in Traverse and ListDirectory Some S3-compatible backends may return nil for LastModified, Size, or ETag fields. Check for nil before dereferencing to prevent panics. * fix(filer): remove blanket 2-minute timeout from lazy listing context Individual SDK operations (S3, GCS, Azure) already have per-request timeouts and retry policies. The blanket timeout could cut off large directory listings mid-operation even though individual pages were succeeding. * fix(filer): preserve trace context in lazy listing with WithoutCancel Use context.WithoutCancel(ctx) instead of context.Background() so trace/span values from the incoming request are retained for distributed tracing, while still decoupling cancellation. * fix(filer): use Store.FindEntry for internal lookups, add Uid/Gid to files, fix updateDirectoryListingSyncedAt - Use f.Store.FindEntry instead of f.FindEntry for staleness check and child lookups to avoid unnecessary lazy-fetch overhead - Set OS_UID/OS_GID on new file entries for consistency with directories - In updateDirectoryListingSyncedAt, use Store.UpdateEntry for existing directories instead of CreateEntry to avoid deleteChunksIfNotNew and NotifyUpdateEvent side effects * fix(filer): distinguish not-found from store errors in lazy listing Previously, any error from Store.FindEntry was treated as "not found," which could cause entry recreation/overwrite on transient DB failures. Now check for filer_pb.ErrNotFound explicitly and skip entries or bail out on real store errors. * refactor(filer): use errors.Is for ErrNotFound comparisons	1 week ago
Moray Baruh	3fe5a7d761	Fix misuse of $__interval instead of $__rate_interval in Grafana panels (#8617 )	1 week ago
Chris Lu	a6774f0e01	add git commit hash on admin ui	1 week ago
Chris Lu	0443b66a75	fix(helm): trim whitespace before s3 TLS args to prevent command breakage (#8614 ) * fix(helm): trim whitespace before s3 TLS args to prevent command breakage (#8613) When global.enableSecurity is enabled, the `{{ include }}` call for s3 TLS args lacked the leading dash (`{{-`), producing an extra blank line in the rendered shell command. This broke shell continuation and caused the filer (and s3/all-in-one) to crash because arguments after the blank line were silently dropped. * ci(helm): assert no blank lines in security+S3 command blocks Renders the chart with global.enableSecurity=true and S3 enabled for normal mode (filer + s3 deployments) and all-in-one mode, then parses every /bin/sh -ec command block and fails if any contains blank lines. This catches the whitespace regression from #8613 where a missing {{- dash on the seaweedfs.s3.tlsArgs include produced a blank line that broke shell continuation. * ci(helm): enable S3 in all-in-one security render test The s3.tlsArgs include is gated by allInOne.s3.enabled, so without this flag the all-in-one command block wasn't actually exercising the TLS args path.	1 week ago
Peter Dodd	0e570d6a8f	feat(remote.mount): add -metadataStrategy flag to control metadata caching (#8568 ) * feat(remote): add -noSync flag to skip upfront metadata pull on mount Made-with: Cursor * refactor(remote): split mount setup from metadata sync Extract ensureMountDirectory for create/validate; call pullMetadata directly when sync is needed. Caller controls sync step for -noSync. Made-with: Cursor * fix(remote): validate mount root when -noSync so bad bucket/creds fail fast When -noSync is used, perform a cheap remote check (ListBuckets and verify bucket exists) instead of skipping all remote I/O. Invalid buckets or credentials now fail at mount time. Made-with: Cursor * test(remote): add TestRemoteMountNoSync for -noSync mount and persisted mapping Made-with: Cursor * test(remote): assert no upfront metadata after -noSync mount After remote.mount -noSync, run fs.ls on the mount dir and assert empty listing so the test fails if pullMetadata was invoked eagerly. Made-with: Cursor * fix(remote): propagate non-ErrNotFound lookup errors in ensureMountDirectory Return lookupErr immediately for any LookupDirectoryEntry failure that is not filer_pb.ErrNotFound, so only the not-found case creates the entry and other lookup failures are reported to the caller. Made-with: Cursor * fix(remote): use errors.Is for ErrNotFound in ensureMountDirectory Replace fragile strings.Contains(lookupErr.Error(), ...) with errors.Is(lookupErr, filer_pb.ErrNotFound) before calling CreateEntry. Made-with: Cursor * fix(remote): use LookupEntry so ErrNotFound is recognised after gRPC Raw gRPC LookupDirectoryEntry returns a status error, not the sentinel, so errors.Is(lookupErr, filer_pb.ErrNotFound) was always false. Use filer_pb.LookupEntry which normalises not-found to ErrNotFound so the mount directory is created when missing. Made-with: Cursor * test(remote): ignore weed shell banner in TestRemoteMountNoSync fs.ls count Exclude master/filer and prompt lines from entry count so the assertion checks only actual fs.ls output for empty -noSync mount. Made-with: Cursor * fix(remote.mount): use 0755 for mount dir, document bucket-less early return Made-with: Cursor * feat(remote.mount): replace -noSync with -metadataStrategy=lazy\|eager - Add -metadataStrategy flag (eager default, lazy skips upfront metadata pull) - Accept lazy/eager case-insensitively; reject invalid values with clear error - Rename TestRemoteMountNoSync to TestRemoteMountMetadataStrategyLazy - Add TestRemoteMountMetadataStrategyEager and TestRemoteMountMetadataStrategyInvalid Made-with: Cursor * fix(remote.mount): validate strategy and remote before creating mount directory Move strategy validation and validateMountRoot (lazy path) before ensureMountDirectory so that invalid strategies or bad bucket/credentials fail without leaving orphaned directory entries in the filer. * refactor(remote.mount): remove unused remote param from ensureMountDirectory The remote RemoteStorageLocation parameter was left over from the old syncMetadata signature. Only remoteConf.Name is used inside the function. doc(remote.mount): add TODO for HeadBucket-style validation validateMountRoot currently lists all buckets to verify one exists. Note the need for a targeted BucketExists method in the interface. * refactor(remote.mount): use MetadataStrategy type and constants Replace raw string comparisons with a MetadataStrategy type and MetadataStrategyEager/MetadataStrategyLazy constants for clarity and compile-time safety. * refactor(remote.mount): rename MetadataStrategy to MetadataCacheStrategy More precisely describes the purpose: controlling how metadata is cached from the remote, not metadata handling in general. * fix(remote.mount): remove validateMountRoot from lazy path Lazy mount's purpose is to skip remote I/O. Validating via ListBuckets contradicts that, especially on accounts with many buckets. Invalid buckets or credentials will surface on first lazy access instead. * fix(test): handle shell exit 0 in TestRemoteMountMetadataStrategyInvalid The weed shell process exits with code 0 even when individual commands fail — errors appear in stdout. Check output instead of requiring a non-nil error. * test(remote.mount): remove metadataStrategy shell integration tests These tests only verify string output from a shell process that always exits 0 — they cannot meaningfully validate eager vs lazy behavior without a real remote backend. --------- Co-authored-by: Chris Lu <chris.lu@gmail.com>	1 week ago
Peter Dodd	146a090754	filer: propagate lazy metadata deletes to remote mounts (#8522 ) * filer: propagate lazy metadata deletes to remote mounts Delete operations now call the remote backend for mounted remote-only entries before removing filer metadata, keeping remote state aligned and preserving retry semantics on remote failures. Made-with: Cursor * filer: harden remote delete metadata recovery Persist remote-delete metadata pendings so local entry removal can be retried after failures, and return explicit errors when remote client resolution fails to prevent silent local-only deletes. Made-with: Cursor * filer: streamline remote delete client lookup and logging Avoid a redundant mount trie traversal by resolving the remote client directly from the matched mount location, and add parity logging for successful remote directory deletions. Made-with: Cursor * filer: harden pending remote metadata deletion flow Retry pending-marker writes before local delete, fail closed when marking cannot be persisted, and start remote pending reconciliation only after the filer store is initialised to avoid nil store access. Made-with: Cursor * filer: avoid lazy fetch in pending metadata reconciliation Use a local-only entry lookup during pending remote metadata reconciliation so cache misses do not trigger remote lazy fetches. Made-with: Cursor * filer: serialise concurrent index read-modify-write in pending metadata deletion Add remoteMetadataDeletionIndexMu to Filer and acquire it for the full read→mutate→commit sequence in markRemoteMetadataDeletionPending and clearRemoteMetadataDeletionPending, preventing concurrent goroutines from overwriting each other's index updates. Made-with: Cursor * filer: start remote deletion reconciliation loop in NewFiler Move the background goroutine for pending remote metadata deletion reconciliation from SetStore (where it was gated by sync.Once) to NewFiler alongside the existing loopProcessingDeletion goroutine. The sync.Once approach was problematic: it buried a goroutine launch as a side effect of a setter, was unrecoverable if the goroutine panicked, could race with store initialisation, and coupled its lifecycle to unrelated shutdown machinery. The existing nil-store guard in reconcilePendingRemoteMetadataDeletions handles the window before SetStore is called. * filer: skip remote delete for replicated deletes from other filers When isFromOtherCluster is true the delete was already propagated to the remote backend by the originating filer. Repeating the remote delete on every replica doubles API calls, and a transient remote failure on the replica would block local metadata cleanup — leaving filers inconsistent. * filer: skip pending marking for directory remote deletes Directory remote deletes are idempotent and do not need the pending/reconcile machinery that was designed for file deletes where the local metadata delete might fail after the remote object is already removed. * filer: propagate remote deletes for children in recursive folder deletion doBatchDeleteFolderMetaAndData iterated child files but only called NotifyUpdateEvent and collected chunks — it never called maybeDeleteFromRemote for individual children. This left orphaned objects in the remote backend when a directory containing remote-only files was recursively deleted. Also fix isFromOtherCluster being hardcoded to false in the recursive call to doBatchDeleteFolderMetaAndData for subdirectories. * filer: simplify pending remote deletion tracking to single index key Replace the double-bookkeeping scheme (individual KV entry per path + newline-delimited index key) with a single index key that stores paths directly. This removes the per-path KV writes/deletes, the base64 encoding round-trip, and the transaction overhead that was only needed to keep the two representations in sync. * filer: address review feedback on remote deletion flow - Distinguish missing remote config from client initialization failure in maybeDeleteFromRemote error messages. - Use a detached context (30s timeout) for pending-mark and pending-clear KV writes so they survive request cancellation after the remote object has already been deleted. - Emit NotifyUpdateEvent in reconcilePendingRemoteMetadataDeletions after a successful retry deletion so downstream watchers and replicas learn about the eventual metadata removal. * filer: remove background reconciliation for pending remote deletions The pending-mark/reconciliation machinery (KV index, mutex, background loop, detached contexts) handled the narrow case where the remote object was deleted but the subsequent local metadata delete failed. The client already receives the error and can retry — on retry the remote not-found is treated as success and the local delete proceeds normally. The added complexity (and new edge cases around NotifyUpdateEvent, multi-filer consistency during reconciliation, and context lifetime) is not justified for a transient store failure the caller already handles. Remove: loopProcessingRemoteMetadataDeletionPending, reconcilePendingRemoteMetadataDeletions, markRemoteMetadataDeletionPending, clearRemoteMetadataDeletionPending, listPendingRemoteMetadataDeletionPaths, encodePendingRemoteMetadataDeletionIndex, FindEntryLocal, and all associated constants, fields, and test infrastructure. * filer: fix test stubs and add early exit on child remote delete error - Refactor stubFilerStore to release lock before invoking callbacks and propagate callback errors, preventing potential deadlocks in tests - Implement ListDirectoryPrefixedEntries with proper prefix filtering instead of delegating to the unfiltered ListDirectoryEntries - Add continue after setting err on child remote delete failure in doBatchDeleteFolderMetaAndData to skip further processing of the failed entry * filer: propagate child remote delete error instead of silently continuing Replace `continue` with early `break` when maybeDeleteFromRemote fails for a child entry during recursive folder deletion. The previous `continue` skipped the error check at the end of the loop body, so a subsequent successful entry would overwrite err and the remote delete error was silently lost. Now the loop breaks, the existing error check returns the error, and NotifyUpdateEvent / chunk collection are correctly skipped for the failed entry. * filer: delete remote file when entry has Remote pointer, not only when remote-only Replace IsInRemoteOnly() guard with entry.Remote == nil check in maybeDeleteFromRemote. IsInRemoteOnly() requires zero local chunks and RemoteSize > 0, which incorrectly skips remote deletion for cached files (local chunks exist) and zero-byte remote objects (RemoteSize 0). The correct condition is whether the entry has a remote backing object at all. --------- Co-authored-by: Chris Lu <chris.lu@gmail.com>	1 week ago
Chris Lu	bfd0d5c084	fix(helm): use componentName for all service names to fix truncation mismatch (#8612 ) * fix(helm): use componentName for all service names to fix truncation mismatch (#8610) PR #8143 updated statefulsets and deployments to use the componentName helper (which truncates the fullname before appending the suffix), but left service definitions using the old `printf + trunc 63` pattern. When release names are long enough, these two strategies produce different names, causing DNS resolution failures (e.g., S3 cannot find the filer-client service and falls back to localhost:8888). Unify all service name definitions and cluster address helpers to use the componentName helper consistently. * refactor(helm): simplify cluster address helpers with ternary * test(helm): add regression test for service name truncation with long release names Renders the chart with a >63-char fullname in both normal and all-in-one modes, then asserts that Service metadata.name values match the hostnames produced by cluster.masterAddress, cluster.filerAddress, and the S3 deployment's -filer= argument. Prevents future truncation/DNS mismatch regressions like #8610. * fix(helm-ci): limit S3_FILER_HOST extraction to first match	1 week ago
Chris Lu	92a76fc1a2	fix(filer): limit concurrent proxy reads per volume server (#8608 ) * fix(filer): limit concurrent proxy reads per volume server Add a per-volume-server semaphore (default 16) to proxyToVolumeServer to prevent replication bursts from overwhelming individual volume servers with hundreds of concurrent connections, which causes them to drop connections with "unexpected EOF". Excess requests queue up and respect the client's context, returning 503 if the client disconnects while waiting. Also log io.CopyBuffer errors that were previously silently discarded. * Apply suggestion from @gemini-code-assist[bot] Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * fix(filer): use non-blocking release for proxy semaphore Prevents a goroutine from blocking forever if releaseProxySemaphore is ever called without a matching acquire. * test(filer): clean up proxySemaphores entries in all proxy tests --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	1 week ago
Chris Lu	b665c329bc	fix(replication): resume partial chunk reads on EOF instead of re-downloading (#8607 ) * fix(replication): resume partial chunk reads on EOF instead of re-downloading When replicating chunks and the source connection drops mid-transfer, accumulate the bytes already received and retry with a Range header to fetch only the remaining bytes. This avoids re-downloading potentially large chunks from scratch on each retry, reducing load on busy source servers and speeding up recovery. * test(replication): add tests for downloadWithRange including gzip partial reads Tests cover: - No offset (no Range header sent) - With offset (Range header verified) - Content-Disposition filename extraction - Partial read + resume: server drops connection mid-transfer, client resumes with Range from the offset of received bytes - Gzip partial read + resume: first response is gzip-encoded (Go auto- decompresses), connection drops, resume request gets decompressed data (Go doesn't add Accept-Encoding when Range is set, so the server decompresses), combined bytes match original * fix(replication): address PR review comments - Consolidate downloadWithRange into DownloadFile with optional offset parameter (variadic), eliminating code duplication (DRY) - Validate HTTP response status: require 206 + correct Content-Range when offset > 0, reject when server ignores Range header - Use if/else for fullData assignment for clarity - Add test for rejected Range (server returns 200 instead of 206) * refactor(replication): remove unused ReplicationSource interface The interface was never referenced and its signature didn't match the actual FilerSource.ReadPart method. --------- Co-authored-by: Copilot <copilot@github.com>	1 week ago
Chris Lu	e4a77b8b16	feat(admin): support env var and security.toml for credentials (#8606 ) * feat(security): add [admin] section to security.toml scaffold Add admin credential fields (user, password, readonly.user, readonly.password) to security.toml. Via viper's WEED_ env prefix and AutomaticEnv(), these are automatically overridable as WEED_ADMIN_USER, WEED_ADMIN_PASSWORD, etc. Ref: https://github.com/seaweedfs/seaweedfs/discussions/8586 * feat(admin): support env var and security.toml fallbacks for credentials Add applyViperFallback() to read admin credentials from security.toml / WEED_* environment variables when CLI flags are not explicitly set. This allows systems like NixOS to pass secrets via env vars instead of CLI flags, which appear in process listings. Precedence: CLI flag > env var / security.toml > default value. Also change -adminUser default from "admin" to "" so that credentials are fully opt-in. Ref: https://github.com/seaweedfs/seaweedfs/discussions/8586 * feat(helm): use WEED_ env vars for admin credentials instead of CLI flags Rename SEAWEEDFS_ADMIN_USER/PASSWORD to WEED_ADMIN_USER/PASSWORD so viper picks them up natively. Remove -adminUser/-adminPassword shell expansion from command args since the Go binary now reads these directly via viper. * docs(admin): document env var and security.toml credential support Add environment variable mapping table, security.toml example, and precedence rules to the admin README. * style(security): use nested [admin.readonly] table in security.toml Use a nested TOML table instead of dotted keys for the readonly credentials. More idiomatic and easier to read; no change in how Viper parses it. * fix(admin): use util.GetViper() for env var support and fix README example applyViperFallback() was using viper.GetString() directly, which bypasses the WEED_ env prefix and AutomaticEnv setup that only happens in util.GetViper(). Switch to util.GetViper().GetString() so WEED_ADMIN_* environment variables are actually picked up. Also fix the README example to include WEED_ADMIN_USER alongside WEED_ADMIN_PASSWORD, since runAdmin() rejects an empty username when a password is set. * fix(admin): restore default adminUser to "admin" Defaulting adminUser to "" broke the common flow of setting only WEED_ADMIN_PASSWORD — runAdmin() rejects an empty username when a password is set. Restore "admin" as the default so that setting only the password works out of the box. * docs(admin): align README security.toml example with scaffold format Use nested [admin.readonly] table instead of flat dotted keys to match the format in weed/command/scaffold/security.toml. * docs(admin): remove README.md in favor of wiki page Admin documentation lives at the wiki (Admin-UI.md). Remove the in-repo README to avoid maintaining duplicate docs. --------- Co-authored-by: Copilot <copilot@github.com>	1 week ago
Copilot	013362d2d3	fix(shell): show planned size in fs.mergeVolumes log to clarify size limit check (#8553 ) The log message was comparing against the planned size of the destination volume (including volumes already planned to merge into it) but only displaying the raw volume size, making the output confusing when the displayed sizes clearly didn't add up to exceed the limit.	1 week ago

1 2 3 4 5 ...

13285 Commits (03fc9ce32c9aba9fe2b33a0829de17814a36cf33) All Branches Search

13285 Commits (03fc9ce32c9aba9fe2b33a0829de17814a36cf33)

All Branches