You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

310 lines
21 KiB

11 years ago
  1. % mergerfs(1) mergerfs user manual
  2. % Antonio SJ Musumeci <trapexit@spawn.link>
  3. % 2015-10-11
  4. # NAME
  5. mergerfs - another FUSE union filesystem
  6. # SYNOPSIS
  7. mergerfs -o&lt;options&gt; &lt;srcpoints&gt; &lt;mountpoint&gt;
  8. # DESCRIPTION
  9. **mergerfs** is similar to **mhddfs**, **unionfs**, and **aufs**. Like **mhddfs** in that it too uses **FUSE**. Like **aufs** in that it provides multiple policies for how to handle behavior.
  10. Why **mergerfs** when those exist? **mhddfs** has not been updated in some time nor very flexible. There are also security issues when with running as root. **aufs** is more flexible than **mhddfs** but kernel based and difficult to debug when problems arise. Neither support file attributes ([chattr](http://linux.die.net/man/1/chattr)).
  11. # FEATURES
  12. * Runs in userspace (FUSE)
  13. * Configurable behaviors
  14. * Supports extended attributes (xattrs)
  15. * Supports file attributes (chattr)
  16. * Dynamically configurable (via xattrs)
  17. * Safe to run as root
  18. * Opportunistic credential caching
  19. * Works with heterogeneous filesystem types
  20. # OPTIONS
  21. ###options###
  22. * **defaults**: a shortcut for FUSE's **atomic_o_trunc**, **auto_cache**, **big_writes**, **default_permissions**, **splice_move**, **splice_read**, and **splice_write**. These options seem to provide the best performance.
  23. * **direct_io**: causes FUSE to bypass an addition caching step which can increase write speeds at the detriment of read speed.
  24. * **minfreespace**: the minimum space value used for the **lfs**, **fwfs**, and **epmfs** policies. Understands 'K', 'M', and 'G' to represent kilobyte, megabyte, and gigabyte respectively. (default: 4G)
  25. * **moveonenospc**: when enabled (set to **true**) if a **write** fails with **ENOSPC** a scan of all drives will be done looking for the drive with most free space which is at least the size of the file plus the amount which failed to write. An attempt to move the file to that drive will occur (keeping all metadata possible) and if successful the original is unlinked and the write retried. (default: false)
  26. * **func.&lt;func&gt;=&lt;policy&gt;**: sets the specific FUSE function's policy. See below for the list of value types. Example: **func.getattr=newest**
  27. * **category.&lt;category&gt;=&lt;policy&gt;**: Sets policy of all FUSE functions in the provided category. Example: **category.create=mfs**
  28. **NOTE:** Options are evaluated in the order listed so if the options are **func.rmdir=rand,category.action=ff** the **action** category setting will override the **rmdir** setting.
  29. ###srcpoints###
  30. The source points argument is a colon (':') delimited list of paths. To make it simpler to include multiple source points without having to modify your [fstab](http://linux.die.net/man/5/fstab) we also support [globbing](http://linux.die.net/man/7/glob). **The globbing tokens MUST be escaped when using via the shell else the shell itself will probably expand it.**
  31. ```
  32. $ mergerfs /mnt/disk\*:/mnt/cdrom /media/drives
  33. ```
  34. The above line will use all points in /mnt prefixed with *disk* and the directory *cdrom*.
  35. In /etc/fstab it'd look like the following:
  36. ```
  37. # <file system> <mount point> <type> <options> <dump> <pass>
  38. /mnt/disk*:/mnt/cdrom /media/drives fuse.mergerfs defaults,allow_other 0 0
  39. ```
  40. **NOTE:** the globbing is done at mount or xattr update time. If a new directory is added matching the glob after the fact it will not be included.
  41. # POLICIES
  42. Filesystem calls are broken up into 3 categories: **action**, **create**, **search**. There are also some calls which have no policy attached due to state being kept between calls. These categories can be assigned a policy which dictates how **mergerfs** behaves. Any policy can be assigned to a category though some aren't terribly practical. For instance: **rand** (Random) may be useful for **create** but could lead to very odd behavior if used for **search**.
  43. #### Functional classifications ####
  44. | Category | FUSE Functions |
  45. |----------|----------------|
  46. | action | chmod, chown, link, removexattr, rename, rmdir, setxattr, truncate, unlink, utimens |
  47. | create | create, mkdir, mknod, symlink |
  48. | search | access, getattr, getxattr, ioctl, listxattr, open, readlink |
  49. | N/A | fallocate, fgetattr, fsync, ftruncate, ioctl, read, readdir, release, statfs, write |
  50. **ioctl** behaves differently if its acting on a directory. It'll use the **getattr** policy to find and open the directory before issuing the **ioctl**. In other cases where something may be searched (to confirm a directory exists across all source mounts) then **getattr** will be used.
  51. #### Policy descriptions ####
  52. | Policy | Description |
  53. |--------------|-------------|
  54. | ff (first found) | Given the order of the drives act on the first one found (regardless if stat would return EACCES). |
  55. | ffwp (first found w/ permissions) | Given the order of the drives act on the first one found which you have access (stat does not error with EACCES). |
  56. | newest (newest file) | If multiple files exist return the one with the most recent mtime. |
  57. | mfs (most free space) | Use the drive with the most free space available. |
  58. | epmfs (existing path, most free space) | If the path exists on multiple drives use the one with the most free space and is greater than **minfreespace**. If no drive has at least **minfreespace** then fallback to **mfs**. |
  59. | fwfs (first with free space) | Pick the first drive which has at least **minfreespace**. |
  60. | lfs (least free space) | Pick the drive with least available space but more than **minfreespace**. |
  61. | rand (random) | Pick an existing drive at random. |
  62. | all | Applies action to all found. For searches it will behave like first found **ff**. |
  63. | enosys, einval, enotsup, exdev, erofs | Exclusively return `-1` with `errno` set to the respective value. Useful for debugging other applications' behavior to errors. |
  64. #### Defaults ####
  65. | Category | Policy |
  66. |----------|--------|
  67. | action | all |
  68. | create | epmfs |
  69. | search | ff |
  70. #### rename ####
  71. [rename](http://man7.org/linux/man-pages/man2/rename.2.html) is a tricky function in a merged system. Normally if a rename can't be done atomically due to the from and to paths existing on different mount points it will return `-1` with `errno = EXDEV`. The atomic rename is most critical for replacing files in place atomically (such as securing writing to a temp file and then replacing a target). The problem is that by merging multiple paths you can have N instances of the source and destinations on different drives. Meaning that if you just renamed each source locally you could end up with the destination files not overwriten / replaced. To address this mergerfs works in the following way. If the source and destination exist in different directories it will immediately return `EXDEV`. Generally it's not expected for cross directory renames to work so it should be fine for most instances (mv,rsync,etc.). If they do belong to the same directory it then runs the `rename` policy to get the files to rename. It iterates through and renames each file while keeping track of those paths which have not been renamed. If all the renames succeed it will then `unlink` or `rmdir` the other paths to clean up any preexisting target files. This allows the new file to be found without the file itself ever disappearing. There may still be some issues with this behavior. Particularly on error. At the moment however this seems the best policy.
  72. #### readdir ####
  73. [readdir](http://linux.die.net/man/3/readdir) is very different from most functions in this realm. It certainly could have it's own set of policies to tweak its behavior. At this time it provides a simple **first found** merging of directories and file found. That is: only the first file or directory found for a directory is returned. Given how FUSE works though the data representing the returned entry comes from **getattr**.
  74. It could be extended to offer the ability to see all files found. Perhaps concatenating **#** and a number to the name. But to really be useful you'd need to be able to access them which would complicate file lookup.
  75. #### statvfs ####
  76. [statvfs](http://linux.die.net/man/2/statvfs) normalizes the source drives based on the fragment size and sums the number of adjusted blocks and inodes. This means you will see the combined space of all sources. Total, used, and free. The sources however are dedupped based on the drive so multiple points on the same drive will not result in double counting it's space.
  77. **NOTE:** Since we can not (easily) replicate the atomicity of an **mkdir** or **mknod** without side effects those calls will first do a scan to see if the file exists and then attempts a create. This means there is a slight race condition. Worse case you'd end up with the directory or file on more than one mount.
  78. # BUILDING
  79. **NOTE:** Prebuilt packages can be found at: https://github.com/trapexit/mergerfs/releases
  80. First get the code from [github](http://github.com/trapexit/mergerfs).
  81. ```
  82. $ git clone https://github.com/trapexit/mergerfs.git
  83. $ # or
  84. $ wget https://github.com/trapexit/mergerfs/archive/master.zip
  85. ```
  86. #### Debian / Ubuntu
  87. ```
  88. $ sudo apt-get install g++ pkg-config git git-buildpackage pandoc debhelper libfuse-dev libattr1-dev
  89. $ cd mergerfs
  90. $ make deb
  91. $ sudo dpkg -i ../mergerfs_version_arch.deb
  92. ```
  93. #### Fedora
  94. ```
  95. $ su -
  96. # dnf install rpm-build fuse-devel libattr-devel pandoc gcc-c++
  97. # cd mergerfs
  98. # make rpm
  99. # rpm -i rpmbuild/RPMS/<arch>/mergerfs-<verion>.<arch>.rpm
  100. ```
  101. #### Generically
  102. Have pkg-config, pandoc, libfuse, libattr1 installed.
  103. ```
  104. $ cd mergerfs
  105. $ make
  106. $ make man
  107. $ sudo make install
  108. ```
  109. # RUNTIME
  110. #### .mergerfs pseudo file ####
  111. ```
  112. <mountpoint>/.mergerfs
  113. ```
  114. There is a pseudo file available at the mount point which allows for the runtime modification of certain **mergerfs** options. The file will not show up in **readdir** but can be **stat**'ed and manipulated via [{list,get,set}xattrs](http://linux.die.net/man/2/listxattr) calls.
  115. Even if xattrs are disabled the [{list,get,set}xattrs](http://linux.die.net/man/2/listxattr) calls will still work.
  116. ##### Keys #####
  117. Use `xattr -l /mount/point/.mergerfs` to see all supported keys.
  118. ##### Example #####
  119. ```
  120. [trapexit:/tmp/mount] $ xattr -l .mergerfs
  121. user.mergerfs.srcmounts: /tmp/a:/tmp/b
  122. user.mergerfs.minfreespace: 4294967295
  123. user.mergerfs.moveonenospc: false
  124. user.mergerfs.policies: all,einval,enosys,enotsup,epmfs,erofs,exdev,ff,ffwp,fwfs,lfs,mfs,newest,rand
  125. user.mergerfs.version: x.y.z
  126. user.mergerfs.category.action: all
  127. user.mergerfs.category.create: epmfs
  128. user.mergerfs.category.search: ff
  129. user.mergerfs.func.access: ff
  130. user.mergerfs.func.chmod: all
  131. user.mergerfs.func.chown: all
  132. user.mergerfs.func.create: epmfs
  133. user.mergerfs.func.getattr: ff
  134. user.mergerfs.func.getxattr: ff
  135. user.mergerfs.func.link: all
  136. user.mergerfs.func.listxattr: ff
  137. user.mergerfs.func.mkdir: epmfs
  138. user.mergerfs.func.mknod: epmfs
  139. user.mergerfs.func.open: ff
  140. user.mergerfs.func.readlink: ff
  141. user.mergerfs.func.removexattr: all
  142. user.mergerfs.func.rename: all
  143. user.mergerfs.func.rmdir: all
  144. user.mergerfs.func.setxattr: all
  145. user.mergerfs.func.symlink: epmfs
  146. user.mergerfs.func.truncate: all
  147. user.mergerfs.func.unlink: all
  148. user.mergerfs.func.utimens: all
  149. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.category.search .mergerfs
  150. ff
  151. [trapexit:/tmp/mount] $ xattr -w user.mergerfs.category.search ffwp .mergerfs
  152. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.category.search .mergerfs
  153. ffwp
  154. [trapexit:/tmp/mount] $ xattr -w user.mergerfs.srcmounts +/tmp/c .mergerfs
  155. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.srcmounts .mergerfs
  156. /tmp/a:/tmp/b:/tmp/c
  157. [trapexit:/tmp/mount] $ xattr -w user.mergerfs.srcmounts =/tmp/c .mergerfs
  158. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.srcmounts .mergerfs
  159. /tmp/c
  160. [trapexit:/tmp/mount] $ xattr -w user.mergerfs.srcmounts '+</tmp/a:/tmp/b' .mergerfs
  161. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.srcmounts .mergerfs
  162. /tmp/a:/tmp/b:/tmp/c
  163. ```
  164. ##### user.mergerfs.srcmounts #####
  165. For **user.mergerfs.srcmounts** there are several instructions available for manipulating the list. The value provided is just as the value used at mount time. A colon (':') delimited list of full path globs.
  166. | Instruction | Description |
  167. |--------------|-------------|
  168. | [list] | set |
  169. | +<[list] | prepend |
  170. | +>[list] | append |
  171. | -[list] | remove all values provided |
  172. | -< | remove first in list |
  173. | -> | remove last in list |
  174. ##### minfreespace #####
  175. Input: interger with an optional suffix. **K**, **M**, or **G**.
  176. Output: value in bytes
  177. ##### moveonenospc #####
  178. Input: **true** and **false**
  179. Ouput: **true** or **false**
  180. ##### categories / funcs #####
  181. Input: short policy string as described elsewhere in this document
  182. Output: the policy string except for categories where its funcs have multiple types. In that case it will be a comma separated list.
  183. #### mergerfs file xattrs ####
  184. While they won't show up when using [listxattr](http://linux.die.net/man/2/listxattr) **mergerfs** offers a number of special xattrs to query information about the files served. To access the values you will need to issue a [getxattr](http://linux.die.net/man/2/getxattr) for one of the following:
  185. * **user.mergerfs.basepath:** the base mount point for the file given the current search policy
  186. * **user.mergerfs.relpath:** the relative path of the file from the perspective of the mount point
  187. * **user.mergerfs.fullpath:** the full path of the original file given the search policy
  188. * **user.mergerfs.allpaths:** a NUL ('\0') separated list of full paths to all files found
  189. ```
  190. [trapexit:/tmp/mount] $ ls
  191. A B C
  192. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.fullpath A
  193. /mnt/a/full/path/to/A
  194. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.basepath A
  195. /mnt/a
  196. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.relpath A
  197. /full/path/to/A
  198. [trapexit:/tmp/mount] $ xattr -p user.mergerfs.allpaths A | tr '\0' '\n'
  199. /mnt/a/full/path/to/A
  200. /mnt/b/full/path/to/A
  201. ```
  202. # TOOLING
  203. * /usr/sbin/fsck.mergerfs: Provides permissions and ownership auditing and the ability to fix them.
  204. # TIPS / NOTES
  205. * If you don't see some directories / files you expect in a merged point be sure the user has permission to all the underlying directories. If `/drive0/a` has is owned by `root:root` with ACLs set to `0700` and `/drive1/a` is `root:root` and `0755` you'll see only `/drive1/a`. Use `fsck.mergerfs` to audit the drive for out of sync permissions.
  206. * Since POSIX gives you only error or success on calls its difficult to determine the proper behavior when applying the behavior to multiple targets. Generally if something succeeds when reading it returns the data it can. If something fails when making an action we continue on and return the last error.
  207. * The recommended options are **defaults,allow_other**. The **allow_other** is to allow users who are not the one which executed mergerfs access to the mountpoint. **defaults** is described above and should offer the best performance. It's possible that if you're running on an older platform the **splice** features aren't available and could error. In that case simply use the other options manually.
  208. * If write performance is valued more than read it may be useful to enable **direct_io**.
  209. * Remember that some policies mixed with some functions may result in strange behaviors. Not that some of these behaviors and race conditions couldn't happen outside **mergerfs** but that they are far more likely to occur on account of attempt to merge together multiple sources of data which could be out of sync due to the different policies.
  210. * An example: [Kodi](http://kodi.tv) and [Plex](http://plex.tv) can apparently use directory [mtime](http://linux.die.net/man/2/stat) to more efficiently determine whether or not to scan for new content rather than simply performing a full scan. If using the current default **getattr** policy of **ff** its possible **Kodi** will miss an update on account of it returning the first directory found's **stat** info and its a later directory on another mount which had the **mtime** recently updated. To fix this you will want to set **func.getattr=newest**. Remember though that this is just **stat**. If the file is later **open**'ed or **unlink**'ed and the policy is different for those then a completely different file or directory could be acted on.
  211. * Due to previously mentioned issues its generally best to set **category** wide policies rather than individual **func**'s. This will help limit the confusion of tools such as [rsync](http://linux.die.net/man/1/rsync).
  212. # Known Issues / Bugs
  213. * Due to the overhead of [getgroups/setgroups](http://linux.die.net/man/2/setgroups) mergerfs utilizes a cache. This cache is opportunistic and per thread. Each thread will query the supplemental groups for a user when that particular thread needs to change credentials and will keep that data for the lifetime of the mount or thread. This means that if a user is added to a group it may not be picked up without the restart of mergerfs. However, since the high level FUSE API's (at least the standard version) thread pool dynamically grows and shrinks it's possible that over time a thread will be killed and later a new thread with no cache will start and query the new data.
  214. * The gid cache uses fixed storage to simplify the design and be compatible with older systems which may not have C++11 compilers (as the original design required). There is enough storage for 256 users' supplemental groups. Each user is allowed upto 32 supplemental groups. Linux >= 2.6.3 allows upto 65535 groups per user but most other *nixs allow far less. NFS allowing only 16. The system does handle overflow gracefully. If the user has more than 32 supplemental groups only the first 32 will be used. If more than 256 users are using the system when an uncached user is found it will evict an existing user's cache at random. So long as there aren't more than 256 active users this should be fine. If either value is too low for your needs you will have to modify `gidcache.hpp` to increase the values. Note that doing so will increase the memory needed by each thread.
  215. # FAQ
  216. *It's mentioned that there are some security issues with mhddfs. What are they? How does mergerfs address them?*
  217. [mhddfs](https://github.com/trapexit/mhddfs) tries to handle being run as **root** by calling [getuid()](https://github.com/trapexit/mhddfs/blob/cae96e6251dd91e2bdc24800b4a18a74044f6672/src/main.c#L319) and if it returns **0** then it will [chown](http://linux.die.net/man/1/chown) the file. Not only is that a race condition but it doesn't handle many other situations. Rather than attempting to simulate POSIX ACL behaviors the proper behavior is to use [seteuid](http://linux.die.net/man/2/seteuid) and [setegid](http://linux.die.net/man/2/setegid), become the user making the original call and perform the action as them. This is how [mergerfs](https://github.com/trapexit/mergerfs) handles things.
  218. If you are familiar with POSIX standards you'll know that this behavior poses a problem. **seteuid** and **setegid** affect the whole process and **libfuse** is multithreaded by default. We'd need to lock access to **seteuid** and **setegid** with a mutex so that the several threads aren't stepping on one another and files end up with weird permissions and ownership. This however wouldn't scale well. With lots of calls the contention on that mutex would be extremely high. Thankfully on Linux and OSX we have a better solution.
  219. OSX has a [non-portable pthread extension](https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man2/pthread_setugid_np.2.html) for per-thread user and group impersonation.
  220. Linux does not support [pthread_setugid_np](https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man2/pthread_setugid_np.2.html) but user and group IDs are a per-thread attribute though documentation on that fact or how to manipulate them is not well distributed. From the **4.00** release of the Linux man-pages project for [setuid](http://man7.org/linux/man-pages/man2/setuid.2.html)
  221. > At the kernel level, user IDs and group IDs are a per-thread attribute. However, POSIX requires that all threads in a process share the same credentials. The NPTL threading implementation handles the POSIX requirements by providing wrapper functions for the various system calls that change process UIDs and GIDs. These wrapper functions (including the one for setuid()) employ a signal-based technique to ensure that when one thread changes credentials, all of the other threads in the process also change their credentials. For details, see nptl(7).
  222. Turns out the setreuid syscalls apply only to the thread. GLIBC hides this away using RT signals to inform all threads to change credentials. Taking after **Samba** mergerfs uses **syscall(SYS_setreuid,...)** to set the callers credentials for that thread only. Jumping back to **root** as necessary should escalated privileges be needed (for instance: to clone paths).
  223. For non-Linux systems mergerfs uses a read-write lock and changes credentials only when necessary. If multiple threads are to be user X then only the first one will need to change the processes credentials. So long as the other threads need to be user X they will take a readlock allow multiple threads to share the credentials. Once a request comes in to run as user Y that thread will attempt a write lock and change to Y's credentials when it can. If the ability to give writers priority is supported then that flag will be used so threads trying to change credentials don't starve. This isn't the best solution but should work reasonably well. As new platforms are supported if they offer per thread credentials those APIs will be adopted.