seaweedfs

History

Chris Lu 5075381060 Support multiple filers for S3 and IAM servers with automatic failover (#7550 ) * Support multiple filers for S3 and IAM servers with automatic failover This change adds support for multiple filer addresses in the 'weed s3' and 'weed iam' commands, enabling high availability through automatic failover. Key changes: - Updated S3ApiServerOption.Filer to Filers ([]pb.ServerAddress) - Updated IamServerOption.Filer to Filers ([]pb.ServerAddress) - Modified -filer flag to accept comma-separated addresses - Added getFilerAddress() helper methods for backward compatibility - Updated all filer client calls to support multiple addresses - Uses pb.WithOneOfGrpcFilerClients for automatic failover Usage: weed s3 -filer=localhost:8888,localhost:8889 weed iam -filer=localhost:8888,localhost:8889 The underlying FilerClient already supported multiple filers with health tracking and automatic failover - this change exposes that capability through the command-line interface. * Add filer discovery: treat initial filers as seeds and discover peers from master Enhances FilerClient to automatically discover additional filers in the same filer group by querying the master server. This allows users to specify just a few seed filers, and the client will discover all other filers in the cluster. Key changes to wdclient/FilerClient: - Added MasterClient, FilerGroup, and DiscoveryInterval fields - Added thread-safe filer list management with RWMutex - Implemented discoverFilers() background goroutine - Uses cluster.ListExistingPeerUpdates() to query master for filers - Automatically adds newly discovered filers to the list - Added Close() method to clean up discovery goroutine New FilerClientOption fields: - MasterClient: enables filer discovery from master - FilerGroup: specifies which filer group to discover - DiscoveryInterval: how often to refresh (default 5 minutes) Usage example: masterClient := wdclient.NewMasterClient(...) filerClient := wdclient.NewFilerClient( []pb.ServerAddress{"localhost:8888"}, // seed filers grpcDialOption, dataCenter, &wdclient.FilerClientOption{ MasterClient: masterClient, FilerGroup: "my-group", }, ) defer filerClient.Close() The initial filers act as seeds - the client discovers and adds all other filers in the same group from the master. Discovered filers are added dynamically without removing existing ones (relying on health checks for unavailable filers). * Address PR review comments: implement full failover for IAM operations Critical fixes based on code review feedback: 1. IAM API Failover (Critical): - Replace pb.WithGrpcFilerClient with pb.WithOneOfGrpcFilerClients in: * GetS3ApiConfigurationFromFiler() * PutS3ApiConfigurationToFiler() * GetPolicies() * PutPolicies() - Now all IAM operations support automatic failover across multiple filers 2. Validation Improvements: - Add validation in NewIamApiServerWithStore() to require at least one filer - Add validation in NewS3ApiServerWithStore() to require at least one filer - Add warning log when no filers configured for credential store 3. Error Logging: - Circuit breaker now logs when config load fails instead of silently ignoring - Helps operators understand why circuit breaker limits aren't applied 4. Code Quality: - Use ToGrpcAddress() for filer address in credential store setup - More consistent with rest of codebase and future-proof These changes ensure IAM operations have the same high availability guarantees as S3 operations, completing the multi-filer failover implementation. * Fix IAM manager initialization: remove code duplication, add TODO for HA Addresses review comment on s3api_server.go:145 Changes: - Remove duplicate code for getting first filer address - Extract filerAddr variable once and reuse - Add TODO comment documenting the HA limitation for IAM manager - Document that loadIAMManagerFromConfig and NewS3IAMIntegration need updates to support multiple filers for full HA Note: This is a known limitation when using filer-backed IAM stores. The interfaces need to be updated to accept multiple filer addresses. For now, documenting this limitation clearly. * Document credential store HA limitation with TODO Addresses review comment on auth_credentials.go:149 Changes: - Add TODO comment documenting that SetFilerClient interface needs update for multi-filer support - Add informative log message indicating HA limitation - Document that this is a known limitation for filer-backed credential stores The SetFilerClient interface currently only accepts a single filer address. To properly support HA, the credential store interfaces need to be updated to handle multiple filer addresses. * Track current active filer in FilerClient for better HA Add GetCurrentFiler() method to FilerClient that returns the currently active filer based on the filerIndex which is updated on successful operations. This provides better availability than always using the first filer. Changes: - Add FilerClient.GetCurrentFiler() method that returns current active filer - Update S3ApiServer.getFilerAddress() to use FilerClient's current filer - Add fallback to first filer if FilerClient not yet initialized - Document IAM limitation (doesn't have FilerClient access) Benefits: - Single-filer operations (URLs, ReadFilerConf, etc.) now use the currently active/healthy filer - Better distribution and failover behavior - FilerClient's round-robin and health tracking automatically determines which filer to use * Document ReadFilerConf HA limitation in lifecycle handlers Addresses review comment on s3api_bucket_handlers.go:880 Add comment documenting that ReadFilerConf uses the current active filer from FilerClient (which is better than always using first filer), but doesn't have built-in multi-filer failover. Add TODO to update filer.ReadFilerConf to support multiple filers for complete HA. For now, it uses the currently active/healthy filer tracked by FilerClient which provides reasonable availability. * Document multipart upload URL HA limitation Addresses review comment on s3api_object_handlers_multipart.go:442 Add comment documenting that part upload URLs point to the current active filer (tracked by FilerClient), which is better than always using the first filer but still creates a potential point of failure if that filer becomes unavailable during upload. Suggest TODO solutions: - Use virtual hostname/load balancer for filers - Have S3 server proxy uploads to healthy filers Current behavior provides reasonable availability by using the currently active/healthy filer rather than being pinned to first filer. * Document multipart completion Location URL limitation Addresses review comment on filer_multipart.go:187 Add comment documenting that the Location URL in CompleteMultipartUpload response points to the current active filer (tracked by FilerClient). Note that clients should ideally use the S3 API endpoint rather than this direct URL. If direct access is attempted and the specific filer is unavailable, the request will fail. Current behavior uses the currently active/healthy filer rather than being pinned to the first filer, providing better availability. * Make credential store use current active filer for HA Update FilerEtcStore to use a function that returns the current active filer instead of a fixed address, enabling high availability. Changes: - Add SetFilerAddressFunc() method to FilerEtcStore - Store uses filerAddressFunc instead of fixed filerGrpcAddress - withFilerClient() calls the function to get current active filer - Keep SetFilerClient() for backward compatibility (marked deprecated) - Update S3ApiServer to pass FilerClient.GetCurrentFiler to store Benefits: - Credential store now uses currently active/healthy filer - Automatic failover when filer becomes unavailable - True HA for credential operations - Backward compatible with old SetFilerClient interface This addresses the credential store limitation - no longer pinned to first filer, uses FilerClient's tracked current active filer. * Clarify multipart URL comments: filer address not used for uploads Update comments to reflect that multipart upload URLs are not actually used for upload traffic - uploads go directly to volume servers. Key clarifications: - genPartUploadUrl: Filer address is parsed out, only path is used - CompleteMultipartUpload Location: Informational field per AWS S3 spec - Actual uploads bypass filer proxy and go directly to volume servers The filer address in these URLs is NOT a HA concern because: 1. Part uploads: URL is parsed for path, upload goes to volume servers 2. Location URL: Informational only, clients use S3 endpoint This addresses the observation that S3 uploads don't go through filers, only metadata operations do. * Remove filer address from upload paths - pass path directly Eliminate unnecessary filer address from upload URLs by passing file paths directly instead of full URLs that get immediately parsed. Changes: - Rename genPartUploadUrl() → genPartUploadPath() (returns path only) - Rename toFilerUrl() → toFilerPath() (returns path only) - Update putToFiler() to accept filePath instead of uploadUrl - Remove URL parsing code (no longer needed) - Remove net/url import (no longer used) - Keep old function names as deprecated wrappers for compatibility Benefits: - Cleaner code - no fake URL construction/parsing - No dependency on filer address for internal operations - More accurate naming (these are paths, not URLs) - Eliminates confusion about HA concerns This completely removes the filer address from upload operations - it was never actually used for routing, only parsed for the path. * Remove deprecated functions: use new path-based functions directly Remove deprecated wrapper functions and update all callers to use the new function names directly. Removed: - genPartUploadUrl() → all callers now use genPartUploadPath() - toFilerUrl() → all callers now use toFilerPath() - SetFilerClient() → removed along with fallback code Updated: - s3api_object_handlers_multipart.go: uploadUrl → filePath - s3api_object_handlers_put.go: uploadUrl → filePath, versionUploadUrl → versionFilePath - s3api_object_versioning.go: toFilerUrl → toFilerPath - s3api_object_handlers_test.go: toFilerUrl → toFilerPath - auth_credentials.go: removed SetFilerClient fallback - filer_etc_store.go: removed deprecated SetFilerClient method Benefits: - Cleaner codebase with no deprecated functions - All variable names accurately reflect that they're paths, not URLs - Single interface for credential stores (SetFilerAddressFunc only) All code now consistently uses the new path-based approach. * Fix toFilerPath: remove URL escaping for raw file paths The toFilerPath function should return raw file paths, not URL-escaped paths. URL escaping was needed when the path was embedded in a URL (old toFilerUrl), but now that we pass paths directly to putToFiler, they should be unescaped. This fixes S3 integration test failures: - test_bucket_listv2_encoding_basic - test_bucket_list_encoding_basic - test_bucket_listv2_delimiter_whitespace - test_bucket_list_delimiter_whitespace The tests were failing because paths were double-encoded (escaped when stored, then escaped again when listed), resulting in %252B instead of %2B for '+' characters. Root cause: When we removed URL parsing in putToFiler, we should have also removed URL escaping in toFilerPath since paths are now used directly without URL encoding/decoding. * Add thread safety to FilerEtcStore and clarify credential store comments Address review suggestions for better thread safety and code clarity: 1. Thread Safety: Add RWMutex to FilerEtcStore - Protects filerAddressFunc and grpcDialOption from concurrent access - Initialize() uses write lock when setting function - SetFilerAddressFunc() uses write lock - withFilerClient() uses read lock to get function and dial option - GetPolicies() uses read lock to check if configured 2. Improved Error Messages: - Prefix errors with "filer_etc:" for easier debugging - "filer address not configured" → "filer_etc: filer address function not configured" - "filer address is empty" → "filer_etc: filer address is empty" 3. Clarified Comments: - auth_credentials.go: Clarify that initial setup is temporary - Document that it's updated in s3api_server.go after FilerClient creation - Remove ambiguity about when FilerClient.GetCurrentFiler is used Benefits: - Safe for concurrent credential operations - Clear error messages for debugging - Explicit documentation of initialization order * Enable filer discovery: pass master addresses to FilerClient Fix two critical issues: 1. Filer Discovery Not Working: Master client was not being passed to FilerClient, so peer discovery couldn't work 2. Credential Store Design: Already uses FilerClient via GetCurrentFiler function - this is the correct design for HA Changes: Command (s3.go): - Read master addresses from GetFilerConfiguration response - Pass masterAddresses to S3ApiServerOption - Log master addresses for visibility S3ApiServerOption: - Add Masters []pb.ServerAddress field for discovery S3ApiServer: - Create MasterClient from Masters when available - Pass MasterClient + FilerGroup to FilerClient via options - Enable discovery with 5-minute refresh interval - Log whether discovery is enabled or disabled Credential Store: - Already correctly uses filerClient.GetCurrentFiler via function - This provides HA without tight coupling to FilerClient struct - Function-based design is clean and thread-safe Discovery Flow: 1. S3 command reads filer config → gets masters + filer group 2. S3ApiServer creates MasterClient from masters 3. FilerClient uses MasterClient to query for peer filers 4. Background goroutine refreshes peer list every 5 minutes 5. Credential store uses GetCurrentFiler to get active filer Now filer discovery actually works! �� * Use S3 endpoint in multipart Location instead of filer address * Add multi-filer failover to ReadFilerConf * Address CodeRabbit review: fix buffer reuse and improve lock safety Address two code review suggestions: 1. Fix buffer reuse in ReadFilerConfFromFilers: - Use local []byte data instead of shared buffer - Prevents partial data from failed attempts affecting successful reads - Creates fresh buffer inside callback for masterClient path - More robust to future changes in read helpers 2. Improve lock safety in FilerClient: - Add WithHealth variants that accept health pointer - Get health pointer while holding lock, then release before calling - Eliminates potential for lock confusion (though no actual deadlock existed) - Clearer separation: lock for data access, atomics for health ops Changes: - ReadFilerConfFromFilers: var data []byte, create buf inside callback - shouldSkipUnhealthyFilerWithHealth(health filerHealth) - recordFilerSuccessWithHealth(health filerHealth) - recordFilerFailureWithHealth(health filerHealth) - Keep old functions for backward compatibility (marked deprecated) - Update LookupVolumeIds to use WithHealth variants Benefits: - More robust multi-filer configuration reading - Clearer lock vs atomic operation boundaries - No lock held during health checks (even though atomics don't block) - Better code organization and maintainability * add constant * Fix IAM manager and post policy to use current active filer * Fix critical race condition and goroutine leak * Update weed/s3api/filer_multipart.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Fix compilation error and address code review suggestions Address remaining unresolved comments: 1. Fix compilation error: Add missing net/url import - filer_multipart.go used url.PathEscape without import - Added "net/url" to imports 2. Fix Location URL formatting (all 4 occurrences): - Add missing slash between bucket and key - Use url.PathEscape for bucket names - Use urlPathEscape for object keys - Handles special characters in bucket/key names - Before: http://host/bucketkey - After: http://host/bucket/key (properly escaped) 3. Optimize discovery loop (O(NM) → O(N+M)): - Use map for existing filers (O(1) lookup) - Reduces time holding write lock - Better performance with many filers - Before: Nested loop for each discovered filer - After: Build map once, then O(1) lookups Changes: - filer_multipart.go: Import net/url, fix all Location URLs - filer_client.go: Use map for efficient filer discovery Benefits: - Compiles successfully - Proper URL encoding (handles spaces, special chars) - Faster discovery with less lock contention - Production-ready URL formatting Fix race conditions and make Close() idempotent Address CodeRabbit review #3512078995: 1. Critical: Fix unsynchronized read in error message - Line 584 read len(fc.filerAddresses) without lock - Race with refreshFilerList appending to slice - Fixed: Take RLock to read length safely - Prevents race detector warnings 2. Important: Make Close() idempotent - Closing already-closed channel panics - Can happen with layered cleanup in shutdown paths - Fixed: Use sync.Once to ensure single close - Safe to call Close() multiple times now 3. Nitpick: Add warning for empty filer address - getFilerAddress() can return empty string - Helps diagnose unexpected state - Added: Warning log when no filers available 4. Nitpick: Guard deprecated index-based helpers - shouldSkipUnhealthyFiler, recordFilerSuccess/Failure - Accessed filerHealth without lock (races with discovery) - Fixed: Take RLock and check bounds before array access - Prevents index out of bounds and races Changes: - filer_client.go: - Add closeDiscoveryOnce sync.Once field - Use Do() in Close() for idempotent channel close - Add RLock guards to deprecated index-based helpers - Add bounds checking to prevent panics - Synchronized read of filerAddresses length in error - s3api_server.go: - Add warning log when getFilerAddress returns empty Benefits: - No race conditions (passes race detector) - No panic on double-close - Better error diagnostics - Safe with discovery enabled - Production-hardened shutdown logic * Fix hardcoded http scheme and add panic recovery Address CodeRabbit review #3512114811: 1. Major: Fix hardcoded http:// scheme in Location URLs - Location URLs always used http:// regardless of client connection - HTTPS clients got http:// URLs (incorrect) - Fixed: Detect scheme from request - Check X-Forwarded-Proto header (for proxies) first - Check r.TLS != nil for direct HTTPS - Fallback to http for plain connections - Applied to all 4 CompleteMultipartUploadResult locations 2. Major: Add panic recovery to discovery goroutine - Long-running background goroutine could crash entire process - Panic in refreshFilerList would terminate program - Fixed: Add defer recover() with error logging - Goroutine failures now logged, not fatal 3. Note: Close() idempotency already implemented - Review flagged as duplicate issue - Already fixed in commit `3d7a65c7e` - sync.Once (closeDiscoveryOnce) prevents double-close panic - Safe to call Close() multiple times Changes: - filer_multipart.go: - Add getRequestScheme() helper function - Update all 4 Location URLs to use dynamic scheme - Format: scheme://host/bucket/key (was: http://...) - filer_client.go: - Add panic recovery to discoverFilers() - Log panics instead of crashing Benefits: - Correct scheme (https/http) in Location URLs - Works behind proxies (X-Forwarded-Proto) - No process crashes from discovery failures - Production-hardened background goroutine - Proper AWS S3 API compliance * Fix S3 WithFilerClient to use filer failover Critical fix for multi-filer deployments: Problem: - S3ApiServer.WithFilerClient() was creating direct connections to ONE filer - Used pb.WithGrpcClient() with single filer address - No failover - if that filer failed, ALL operations failed - Caused test failures: "bucket directory not found" - IAM Integration Tests failing with 500 Internal Error Root Cause: - WithFilerClient bypassed filerClient connection management - Always connected to getFilerAddress() (current filer only) - Didn't retry other filers on failure - All getEntry(), updateEntry(), etc. operations failed if current filer down Solution: 1. Added FilerClient.GetAllFilers() method - Returns snapshot of all filer addresses - Thread-safe copy to avoid races 2. Implemented withFilerClientFailover() - Try current filer first (fast path) - On failure, try all other filers - Log successful failover - Return error only if ALL filers fail 3. Updated WithFilerClient() - Use filerClient for failover when available - Fallback to direct connection for testing/init Impact: ✅ All S3 operations now support multi-filer failover ✅ Bucket metadata reads work with any available filer ✅ Entry operations (getEntry, updateEntry) failover automatically ✅ IAM tests should pass now ✅ Production-ready HA support Files Changed: - wdclient/filer_client.go: Add GetAllFilers() method - s3api/s3api_handlers.go: Implement failover logic This fixes the test failure where bucket operations failed when the primary filer was temporarily unavailable during cleanup. * Update current filer after successful failover Address code review: https://github.com/seaweedfs/seaweedfs/pull/7550#pullrequestreview-3512223723 Issue: After successful failover, the current filer index was not updated. This meant every subsequent request would still try the (potentially unhealthy) original filer first, then failover again. Solution: 1. Added FilerClient.SetCurrentFiler(addr) method: - Finds the index of specified filer address - Atomically updates filerIndex to point to it - Thread-safe with RLock 2. Call SetCurrentFiler after successful failover: - Update happens immediately after successful connection - Future requests start with the known-healthy filer - Reduces unnecessary failover attempts Benefits: ✅ Subsequent requests use healthy filer directly ✅ No repeated failover to same unhealthy filer ✅ Better performance - fast path hits healthy filer ✅ Comment now matches actual behavior * Integrate health tracking with S3 failover Address code review suggestion to leverage existing health tracking instead of simple iteration through all filers. Changes: 1. Added address-based health tracking API to FilerClient: - ShouldSkipUnhealthyFiler(addr) - check circuit breaker - RecordFilerSuccess(addr) - reset failure count - RecordFilerFailure(addr) - increment failure count These methods find the filer by address and delegate to existing WithHealth methods for actual health management. 2. Updated withFilerClientFailover to use health tracking: - Record success/failure for every filer attempt - Skip unhealthy filers during failover (circuit breaker) - Only try filers that haven't exceeded failure threshold - Automatic re-check after reset timeout Benefits:* ✅ Circuit breaker prevents wasting time on known-bad filers ✅ Health tracking shared across all operations ✅ Automatic recovery when unhealthy filers come back ✅ Reduced latency - skip filers in failure state ✅ Better visibility with health metrics Behavior: - Try current filer first (fast path) - If fails, record failure and try other HEALTHY filers - Skip filers with failureCount >= threshold (default 3) - Re-check unhealthy filers after resetTimeout (default 30s) - Record all successes/failures for health tracking * Update weed/wdclient/filer_client.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Enable filer discovery with empty filerGroup Empty filerGroup is a valid value representing the default group. The master client can discover filers even when filerGroup is empty. Change: - Remove the filerGroup != "" check in NewFilerClient - Keep only masterClient != nil check - Empty string will be passed to ListClusterNodes API as-is This enables filer discovery to work with the default group. --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>		4 weeks ago
..
src	HDFS: Java client replication configuration (#7526)	1 month ago
.gitignore	HDFS: Java client replication configuration (#7526)	1 month ago
Makefile	HDFS: Java client replication configuration (#7526)	1 month ago
docker-compose.yml	HDFS: Java client replication configuration (#7526)	1 month ago
pom.xml	HDFS: Java client replication configuration (#7526)	1 month ago
quick-start.sh	HDFS: Java client replication configuration (#7526)	1 month ago
run-tests.sh	HDFS: Java client replication configuration (#7526)	1 month ago