seaweedfs

Commit Graph

Author	SHA1	Message	Date
Chris Lu	540fc97e00	s3/iam: reuse one request id per request (#8538 ) * request_id: add shared request middleware * s3err: preserve request ids in responses and logs * iam: reuse request ids in XML responses * sts: reuse request ids in XML responses * request_id: drop legacy header fallback * request_id: use AWS-style request id format * iam: fix AWS-compatible XML format for ErrorResponse and field ordering - ErrorResponse uses bare <RequestId> at root level instead of <ResponseMetadata> wrapper, matching the AWS IAM error response spec - Move CommonResponse to last field in success response structs so <ResponseMetadata> serializes after result elements - Add randomness to request ID generation to avoid collisions - Add tests for XML ordering and ErrorResponse format * iam: remove duplicate error_response_test.go Test is already covered by responses_test.go. * address PR review comments - Guard against typed nil pointers in SetResponseRequestID before interface assertion (CodeRabbit) - Use regexp instead of strings.Index in test helpers for extracting request IDs (Gemini) * request_id: prevent spoofing, fix nil-error branch, thread reqID to error writers - Ensure() now always generates a server-side ID, ignoring client-sent x-amz-request-id headers to prevent request ID spoofing. Uses a private context key (contextKey{}) instead of the header string. - writeIamErrorResponse in both iamapi and embedded IAM now accepts reqID as a parameter instead of calling Ensure() internally, ensuring a single request ID per request lifecycle. - The nil-iamError branch in writeIamErrorResponse now writes a 500 Internal Server Error response instead of returning silently. - Updated tests to set request IDs via context (not headers) and added tests for spoofing prevention and context reuse. * sts: add request-id consistency assertions to ActionInBody tests * test: update admin test to expect server-generated request IDs The test previously sent a client x-amz-request-id header and expected it echoed back. Since Ensure() now ignores client headers to prevent spoofing, update the test to verify the server returns a non-empty server-generated request ID instead. * iam: add generic WithRequestID helper alongside reflection-based fallback Add WithRequestID[T] that uses generics to take the address of a value type, satisfying the pointer receiver on SetRequestId without reflection. The existing SetResponseRequestID is kept for the two call sites that operate on interface{} (from large action switches where the concrete type varies at runtime). Generics cannot replace reflection there since Go cannot infer type parameters from interface{}. * Remove reflection and generics from request ID setting Call SetRequestId directly on concrete response types in each switch branch before boxing into interface{}, eliminating the need for WithRequestID (generics) and SetResponseRequestID (reflection). * iam: return pointer responses in action dispatch * Fix IAM error handling consistency and ensure request IDs on all responses - UpdateUser/CreatePolicy error branches: use writeIamErrorResponse instead of s3err.WriteErrorResponse to preserve IAM formatting and request ID - ExecuteAction: accept reqID parameter and generate one if empty, ensuring every response carries a RequestId regardless of caller * Clean up inline policies on DeleteUser and UpdateUser rename DeleteUser: remove InlinePolicies[userName] from policy storage before removing the identity, so policies are not orphaned. UpdateUser: move InlinePolicies[userName] to InlinePolicies[newUserName] when renaming, so GetUserPolicy/DeleteUserPolicy work under the new name. Both operations persist the updated policies and return an error if the storage write fails, preventing partial state.	4 days ago
Aaron	14cd0f53ba	Places the CommonResponse struct at the end of all IAM responses. (#8537 ) * Places the CommonResponse struct at the end of all IAM responses, rather than the start. * iam: fix error response request id layout * iam: add XML ordering regression test * iam: share request id generation --------- Co-authored-by: Aaron Segal <aaron.segal@rpsolutions.com> Co-authored-by: Chris Lu <chris.lu@gmail.com>	4 days ago
Chris Lu	c090604143	Add UpdateAccessKey support to IAM API (#8342 ) * Add UpdateAccessKey support to IAM API * simplify	3 weeks ago
Chris Lu	f41925b60b	Embed IAM API into S3 server (#7740 ) * Embed IAM API into S3 server This change simplifies the S3 and IAM deployment by embedding the IAM API directly into the S3 server, following the patterns used by MinIO and Ceph RGW. Changes: - Add -iam flag to S3 server (enabled by default) - Create embedded IAM API handler in s3api package - Register IAM routes (POST to /) in S3 server when enabled - Deprecate standalone 'weed iam' command with warning Benefits: - Single binary, single port for both S3 and IAM APIs - Simpler deployment and configuration - Shared credential manager between S3 and IAM - Backward compatible: 'weed iam' still works with deprecation warning Usage: - weed s3 -port=8333 # S3 + IAM on same port (default) - weed s3 -iam=false # S3 only, disable embedded IAM - weed iam -port=8111 # Deprecated, shows warning * Fix nil pointer panic: add s3.iam flag to weed server command The enableIam field was not initialized when running S3 via 'weed server', causing a nil pointer dereference when checking s3opt.enableIam. Fix nil pointer panic: add s3.iam flag to weed filer command The enableIam field was not initialized when running S3 via 'weed filer -s3', causing a nil pointer dereference when checking s3opt.enableIam. Add integration tests for embedded IAM API Tests cover: - CreateUser, ListUsers, GetUser, UpdateUser, DeleteUser - CreateAccessKey, DeleteAccessKey, ListAccessKeys - CreatePolicy, PutUserPolicy, GetUserPolicy - Implicit username extraction from authorization header - Full user lifecycle workflow test These tests validate the embedded IAM API functionality that was added in the S3 server, ensuring IAM operations work correctly when served from the same port as S3. * Security: Use crypto/rand for IAM credential generation SECURITY FIX: Replace math/rand with crypto/rand for generating access keys and secret keys. Using math/rand is not cryptographically secure and can lead to predictable credentials. This change: 1. Replaces math/rand with crypto/rand in both: - weed/s3api/s3api_embedded_iam.go (embedded IAM) - weed/iamapi/iamapi_management_handlers.go (standalone IAM) 2. Removes the seededRand variable that was initialized with time-based seed (predictable) 3. Updates StringWithCharset/iamStringWithCharset to: - Use crypto/rand.Int() for secure random index generation - Return an error for proper error handling 4. Updates CreateAccessKey to handle the new error return 5. Updates DoActions handlers to propagate errors properly * Fix critical bug: DeleteUserPolicy was deleting entire user instead of policy BUG FIX: DeleteUserPolicy was incorrectly deleting the entire user identity from s3cfg.Identities instead of just clearing the user's inline policy (Actions). Before (wrong): s3cfg.Identities = append(s3cfg.Identities[:i], s3cfg.Identities[i+1:]...) After (correct): ident.Actions = nil Also: - Added proper iamDeleteUserPolicyResponse / DeleteUserPolicyResponse types - Fixed return type from iamPutUserPolicyResponse to iamDeleteUserPolicyResponse Affected files: - weed/s3api/s3api_embedded_iam.go (embedded IAM) - weed/iamapi/iamapi_management_handlers.go (standalone IAM) - weed/iamapi/iamapi_response.go (response types) * Add tests for DeleteUserPolicy to prevent regression Added two tests: 1. TestEmbeddedIamDeleteUserPolicy - Verifies that: - User is NOT deleted (identity still exists) - Credentials are NOT deleted - Only Actions (policy) are cleared to nil 2. TestEmbeddedIamDeleteUserPolicyUserNotFound - Verifies: - Returns 404 when user doesn't exist These tests ensure the bug fixed in the previous commit (deleting user instead of policy) doesn't regress. * Fix race condition: Add mutex lock to IAM DoActions The DoActions function performs a read-modify-write operation on the shared IAM configuration without any locking. This could lead to race conditions and data loss if multiple requests modify the IAM config concurrently. Added mutex lock at the start of DoActions in both: - weed/s3api/s3api_embedded_iam.go (embedded IAM) - weed/iamapi/iamapi_management_handlers.go (standalone IAM) The lock protects the entire read-modify-write cycle: 1. GetS3ApiConfiguration (read) 2. Modify s3cfg based on action 3. PutS3ApiConfiguration (write) * Fix action comparison and document CreatePolicy limitation 1. Replace reflect.DeepEqual with order-independent string slice comparison - Added iamStringSlicesEqual/stringSlicesEqual helper functions - Prevents duplicate policy statements when actions are in different order 2. Document CreatePolicy limitation in embedded IAM - Added TODO comment explaining that managed policies are not persisted - Users should use PutUserPolicy for inline policies 3. Fix deadlock in standalone IAM's CreatePolicy - Removed nested lock acquisition (DoActions already holds the lock) Files changed: - weed/s3api/s3api_embedded_iam.go - weed/iamapi/iamapi_management_handlers.go * Add rate limiting to embedded IAM endpoint Apply circuit breaker rate limiting to the IAM endpoint to prevent abuse. Also added request tracking for IAM operations. The IAM endpoint now follows the same pattern as other S3 endpoints: - track() for request metrics - s3a.iam.Auth() for authentication - s3a.cb.Limit() for rate limiting * Fix handleImplicitUsername to properly look up username from AccessKeyId According to AWS spec, when UserName is not specified in an IAM request, IAM should determine the username implicitly based on the AccessKeyId signing the request. Previously, the code incorrectly extracted s[2] (region field) from the SigV4 credential string as the username. This fix: 1. Extracts the AccessKeyId from s[0] of the credential string 2. Looks up the AccessKeyId in the credential store using LookupByAccessKey 3. Uses the identity's Name field as the username if found Also: - Added exported LookupByAccessKey wrapper method to IdentityAccessManagement - Updated tests to verify correct access key lookup behavior - Applied fix to both embedded IAM and standalone IAM implementations * Fix CreatePolicy to not trigger unnecessary save CreatePolicy validates the policy document and returns metadata but does not actually store the policy (SeaweedFS uses inline policies attached via PutUserPolicy). However, 'changed' was left as true, triggering an unnecessary save operation. Set changed = false after successful CreatePolicy validation in both embedded IAM and standalone IAM implementations. * Improve embedded IAM test quality - Remove unused mock types (mockCredentialManager, mockEmbeddedIamApi) - Use proto.Clone instead of proto.Merge for proper deep copy semantics - Replace brittle regex-based XML error extraction with proper XML unmarshalling - Remove unused regexp import - Add state and field assertions to tests: - CreateUser: verify username in response and user persisted in config - ListUsers: verify response contains expected users - GetUser: verify username in response - CreatePolicy: verify policy metadata in response - PutUserPolicy: verify actions were attached to user - CreateAccessKey: verify credentials in response and persisted in config * Remove shared test state and improve executeEmbeddedIamRequest - Remove package-level embeddedIamApi variable to avoid shared test state - Update executeEmbeddedIamRequest to accept API instance as parameter - Only call xml.Unmarshal when v != nil, making nil-v cases explicit - Return unmarshal error properly instead of always returning it - Update all tests to create their own EmbeddedIamApiForTest instance - Each test now has isolated state, preventing test interdependencies * Add comprehensive test coverage for embedded IAM Added tests for previously uncovered functions: - iamStringSlicesEqual: 0% → 100% - iamMapToStatementAction: 40% → 100% - iamMapToIdentitiesAction: 30% → 70% - iamHash: 100% - iamStringWithCharset: 85.7% - GetPolicyDocument: 75% → 100% - CreatePolicy: 91.7% → 100% - DeleteUser: 83.3% → 100% - GetUser: 83.3% → 100% - ListAccessKeys: 55.6% → 88.9% New test cases for helper functions, error handling, and edge cases. * Document IAM code duplication and reference GitHub issue #7747 Added comments to both IAM implementations noting the code duplication and referencing the tracking issue for future refactoring: - weed/s3api/s3api_embedded_iam.go (embedded IAM) - weed/iamapi/iamapi_management_handlers.go (standalone IAM) See: https://github.com/seaweedfs/seaweedfs/issues/7747 * Implement granular IAM authorization for self-service operations Previously, all IAM actions required ACTION_ADMIN permission, which was overly restrictive. This change implements AWS-like granular permissions: Self-service operations (allowed without admin for own resources): - CreateAccessKey (on own user) - DeleteAccessKey (on own user) - ListAccessKeys (on own user) - GetUser (on own user) - UpdateAccessKey (on own user) Admin-only operations: - CreateUser, DeleteUser, UpdateUser - PutUserPolicy, GetUserPolicy, DeleteUserPolicy - CreatePolicy - ListUsers - Operations on other users The new AuthIam middleware: 1. Authenticates the request (signature verification) 2. Parses the IAM Action and target UserName 3. For self-service actions, allows if user is operating on own resources 4. For all other actions or operations on other users, requires admin * Fix misleading comment in standalone IAM CreatePolicy The comment incorrectly stated that CreatePolicy only validates the policy document. In the standalone IAM server, CreatePolicy actually persists the policy via iama.s3ApiConfig.PutPolicies(). The changed flag is false because it doesn't modify s3cfg.Identities, not because nothing is stored. * Simplify IAM auth and add RequestId to responses - Remove redundant ACTION_ADMIN fallback in AuthIam: The action parameter in authRequest is for permission checking, not signature verification. If auth fails with ACTION_READ, it will fail with ACTION_ADMIN too. - Add SetRequestId() call before writing IAM responses for AWS compatibility. All IAM response structs embed iamCommonResponse which has SetRequestId(). * Address code review feedback for IAM implementation 1. auth_credentials.go: Add documentation warning that LookupByAccessKey returns internal pointers that should not be mutated. 2. iamapi_management_handlers.go & s3api_embedded_iam.go: Add input guards for StringWithCharset/iamStringWithCharset when length <= 0 or charset is empty to avoid runtime errors from rand.Int. 3. s3api_embedded_iam_test.go: Don't ignore xml.Marshal errors in test DoActions handler. Return proper error response if marshaling fails. 4. s3api_embedded_iam_test.go: Use obviously fake access key IDs (AKIATESTFAKEKEY) to avoid CI secret scanner false positives. Address code review feedback for IAM implementation (batch 2) 1. iamapi/iamapi_management_handlers.go: - Redact Authorization header log (security: avoid exposing signature) - Add nil-guard for iama.iam before LookupByAccessKey call 2. iamapi/iamapi_test.go: - Replace real-looking access keys with obviously fake ones (AKIATESTFAKEKEY) to avoid CI secret scanner false positives 3. s3api/s3api_embedded_iam.go - CreateUser: - Validate UserName is not empty (return ErrCodeInvalidInputException) - Check for duplicate users (return ErrCodeEntityAlreadyExistsException) 4. s3api/s3api_embedded_iam.go - CreateAccessKey: - Return ErrCodeNoSuchEntityException if user doesn't exist - Removed implicit user creation behavior 5. s3api/s3api_embedded_iam.go - getActions: - Fix S3 ARN parsing for bucket/path patterns - Handle mybucket, mybucket/, mybucket/path/* correctly - Return error if no valid actions found in policy 6. s3api/s3api_embedded_iam.go - handleImplicitUsername: - Redact Authorization header log - Add nil-guard for e.iam 7. s3api/s3api_embedded_iam.go - DoActions: - Reload in-memory IAM maps after credential mutations - Call LoadS3ApiConfigurationFromCredentialManager after save 8. s3api/auth_credentials.go - AuthSignatureOnly: - Add new signature-only authentication method - Bypasses S3 authorization checks for IAM operations - Used by AuthIam to properly separate signature verification from IAM-specific permission checks * Fix nil pointer dereference and error handling in IAM 1. AuthIam: Add nil check for identity after AuthSignatureOnly - AuthSignatureOnly can return nil identity with ErrNone for authTypePostPolicy or authTypeStreamingUnsigned - Now returns ErrAccessDenied if identity is nil 2. writeIamErrorResponse: Add missing error code cases - ErrCodeEntityAlreadyExistsException -> HTTP 409 Conflict - ErrCodeInvalidInputException -> HTTP 400 Bad Request 3. UpdateUser: Use consistent error handling - Changed from direct ErrInvalidRequest to writeIamErrorResponse - Now returns correct HTTP status codes based on error type * Add IAM config reload to standalone IAM server after mutations Match the behavior of embedded IAM (s3api_embedded_iam.go) by reloading the in-memory identity maps after persisting configuration changes. This ensures newly created access keys are visible to LookupByAccessKey immediately without requiring a server restart. * Minor improvements to test helpers and log masking 1. iamapi_test.go: Update mustMarshalJSON to use t.Helper() and t.Fatal() instead of panic() for better test diagnostics 2. s3api_embedded_iam.go: Mask access key in 'not found' log message to avoid exposing full access key IDs in logs * Mask access key in standalone IAM log message for consistency Match the embedded IAM version by masking the access key ID in the 'not found' log message (show only first 4 chars).	3 months ago
Chris Lu	7cb1ca1308	Add policy engine (#6970 )	8 months ago
Tom Crasset	aa299462f2	improve iam error handling (#6446 ) * improve iam error handling * Delete docker/test.py	1 year ago
Konstantin Lebedev	5ffacbb6ea	refactor all methods strings to const (#5726 )	2 years ago
chrislu	26dbc6c905	move to https://github.com/seaweedfs/seaweedfs	4 years ago
guosj	8fd7b24b80	remove redundant logs & add unit test	4 years ago
guosj	ed07e76f0e	add test function	4 years ago
Konstantin Lebedev	5021bea698	GetUserPolicy	5 years ago
Konstantin Lebedev	ed79baa30f	add tests	5 years ago

12 Commits (fa7da0f57e6d0ea273cea1e75afb9993d95732d8)