seaweedfs

Commit Graph

Author	SHA1	Message	Date
Chris Lu	8671a921b7	fix: seed trace server counts from ActiveTopology to match detection logic The decision trace was building serverVolumeCounts only from metrics, missing zero-volume servers seeded from ActiveTopology by Detection. This could cause the trace to report wrong server counts, incorrect imbalance ratios, or spurious "too few servers" messages. Pass activeTopology into the trace function and seed server counts the same way Detection does.	2 days ago
Chris Lu	d35dd2a3b5	fix: return explicit truncated flag from Detection instead of approximating Detection now returns (results, truncated, error) where truncated is true only when the loop stopped because it hit maxResults, not when it ran out of work naturally. This eliminates false hasMore signals when detection happens to produce exactly maxResults results by resolving the imbalance.	2 days ago
Chris Lu	a2eafcc9cc	fix: don't over-fetch in stateful detection to avoid orphaned pending tasks Detection registers planned moves in ActiveTopology via AddPendingTask, so requesting maxResults+1 would create an extra pending task that gets discarded during trim. Use len(results) >= maxResults as the hasMore signal instead, which is correct since Detection already caps internally.	2 days ago
Chris Lu	33da75cfa8	fix: handle zero maxResults as no-cap, emit trace after trim, seed empty servers - When MaxResults is 0 (omitted), treat as no explicit cap instead of defaulting to 1; only apply the +1 over-fetch probe when caller supplies a positive limit - Move decision trace emission after hasMore/trim so the trace accurately reflects the returned proposals - Seed serverVolumeCounts from ActiveTopology so servers that have a matching disk type but zero volumes are included in the imbalance calculation and MinServerCount check	2 days ago
Chris Lu	85bc50ee1e	fix: consistent hasMore pattern and remove double-counted LoadCount in scoring - Adopt vacuum_handler's hasMore pattern: over-fetch by 1, check len > maxResults, and truncate — consistent truncation semantics - Remove direct LoadCount penalty in calculateBalanceScore since LoadCount is already factored into effectiveVolumeCount for utilization scoring; bump utilization weight from 40 to 50 to compensate for the removed 10-point load penalty	2 days ago
Chris Lu	2a6828294a	fix: address PR review findings in balance detection - hasMore flag: compute from len(results) >= maxResults so the scheduler knows more pages may exist, matching vacuum/EC handler pattern - Exhausted server fallthrough: when no eligible volumes remain on the current maxServer (all have pending tasks) or destination planning fails, mark the server as exhausted and continue to the next overloaded server instead of stopping the entire detection loop - Return canonical destination server ID directly from createBalanceTask instead of resolving via findServerIDByAddress, eliminating the fragile address→ID lookup for adjustment tracking - Fix bestScore sentinel: use math.Inf(-1) instead of -1.0 so disks with negative scores (high pending load, same rack/DC) are still selected as the best available destination - Add TestDetection_ExhaustedServerFallsThrough covering the scenario where the top server's volumes are all blocked by pre-existing tasks	2 days ago
Chris Lu	f0ba8b6e3b	fix: volume balance detection now returns multiple tasks per run (#8551 ) Previously, detectForDiskType() returned at most 1 balance task per disk type, making the MaxJobsPerDetection setting ineffective. The detection loop now iterates within each disk type, planning multiple moves until the imbalance drops below threshold or maxResults is reached. Effective volume counts are adjusted after each planned move so the algorithm correctly re-evaluates which server is overloaded.	2 days ago
Chris Lu	587c24ec89	plugin worker: support job type categories (all, default, heavy) (#8547 ) * plugin worker: add handler registry with job categories Introduce a self-registration pattern for plugin worker job handlers. Each handler can register itself via init() with a HandlerFactory that declares its job type, category (default/heavy), CLI aliases, and a builder function. ResolveHandlerFactories accepts a mix of category names ("all", "default", "heavy") and explicit job type names/aliases, returning the matching factories. This enables workers to be configured by resource profile rather than requiring explicit job type enumeration. * plugin worker: register all handlers via init() Each job handler now self-registers into the global handler registry with its canonical job type, category, CLI aliases, and build function: - vacuum: category=default - volume_balance: category=default - admin_script: category=default - erasure_coding: category=heavy - iceberg_maintenance: category=heavy Adding a new job type now only requires adding the init() call in the handler file itself — no other files need to be touched. * plugin worker: replace hardcoded job type switch with registry Remove buildPluginWorkerHandler, parsePluginWorkerJobTypes, and canonicalPluginWorkerJobType from worker_runtime.go. The simplified buildPluginWorkerHandlers now delegates to pluginworker.ResolveHandlerFactories, which resolves category names ("all", "default", "heavy") and explicit job type names/aliases. The default job type is changed from an explicit list to "all", so new handlers registered via init() are automatically picked up. Update all tests to use the new API. * plugin worker: update CLI help text for job categories Update the -jobType flag description and command examples to document category support (all, default, heavy) alongside explicit job type names. * plugin worker: address review feedback - Add CategoryAll constant; use typed constants in tokenAsCategory - Pre-allocate result slice in ResolveHandlerFactories - Add vacuum aliases (vol.vacuum, volume.vacuum) - List alias examples (ec, balance, iceberg) in -jobType flag help - Create handlers aggregator package for subpackage blank imports so new handler subpackages only need to be added in one place - Make category tests relationship-based (subset/union checks) instead of asserting exact handler counts - Add clarifying comments to worker_test.go and mini_plugin_test.go listing expected handler names next to count assertions --------- Co-authored-by: Copilot <copilot@github.com>	3 days ago
Chris Lu	72c2c7ef8b	Add iceberg_maintenance plugin worker handler (Phase 1) (#8501 ) * Add iceberg_maintenance plugin worker handler (Phase 1) Implement automated Iceberg table maintenance as a new plugin worker job type. The handler scans S3 table buckets for tables needing maintenance and executes operations in the correct Iceberg order: expire snapshots, remove orphan files, and rewrite manifests. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix unsafe int64→int narrowing for MaxSnapshotsToKeep Use int64(wouldKeep) instead of int(config.MaxSnapshotsToKeep) to avoid potential truncation on 32-bit platforms (CodeQL high severity). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix unsafe int64→int narrowing for MinInputFiles Use int64(len(manifests)) instead of int(config.MinInputFiles) to avoid potential truncation on 32-bit platforms (CodeQL high severity). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix unsafe int64→int narrowing for MaxCommitRetries Clamp MaxCommitRetries to [1,20] range and keep as int64 throughout the retry loop to avoid truncation on 32-bit platforms (CodeQL high severity). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Sort snapshots explicitly by timestamp in expireSnapshots The previous logic relied on implicit ordering of the snapshot list. Now explicitly sorts snapshots by timestamp descending (most recent first) and uses a simpler keep-count loop: keep the first MaxSnapshotsToKeep newest snapshots plus the current snapshot unconditionally, then expire the rest that exceed the retention window. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Handle errors properly in listFilerEntries Previously all errors from ListEntries and Recv were silently swallowed. Now: treat "not found" errors as empty directory, propagate other ListEntries errors, and check for io.EOF explicitly on Recv instead of breaking on any error. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix overly broad HasSuffix check in orphan detection The bare strings.HasSuffix(ref, entry.Name) could match files with similar suffixes (e.g. "123.avro" matching "snap-123.avro"). Replaced with exact relPath match and a "/"-prefixed suffix check to avoid false positives. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Replace fmt.Sscanf with strconv.Atoi in extractMetadataVersion strconv.Atoi is more explicit and less fragile than fmt.Sscanf for parsing a simple integer from a trimmed string. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Recursively traverse directories for orphan file detection The orphan cleanup only listed a single directory level under data/ and metadata/, skipping IsDirectory entries. Partitioned Iceberg tables store data files in nested partition directories (e.g. data/region=us-east/file.parquet) which were never evaluated. Add walkFilerEntries helper that recursively descends into subdirectories, and use it in removeOrphans so all nested files are considered for orphan checks. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix manifest path drift from double time.Now() calls rewriteManifests called time.Now().UnixMilli() twice: once for the path embedded in WriteManifest and once for the filename passed to saveFilerFile. These timestamps would differ, causing the manifest's internal path reference to not match the actual saved filename. Compute the filename once and reuse it for both WriteManifest and saveFilerFile so they always reference the same path. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add TestManifestRewritePathConsistency test Verifies that WriteManifest returns a ManifestFile whose FilePath() matches the path passed in, and that path.Base() of that path matches the filename used for saveFilerFile. This validates the single- timestamp pattern used in rewriteManifests produces consistent paths. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Make parseOperations return error on unknown operations Previously parseOperations silently dropped unknown operation names and could return an empty list. Now validates inputs against the canonical set and returns a clear error if any unknown operation is specified. Updated Execute to surface the error instead of proceeding with an empty operation list. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Use gRPC status codes instead of string matching in listFilerEntries Replace brittle strings.Contains(err.Error(), "not found") check with status.Code(err) == codes.NotFound for proper gRPC error handling. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add stale-plan guard in commit closures for expireSnapshots and rewriteManifests Both operations plan outside the commit mutation using a snapshot ID captured from the initial metadata read. If the table head advances concurrently, the mutation would create a snapshot parented to the wrong head or remove snapshots based on a stale view. Add a guard inside each mutation closure that verifies currentMeta.CurrentSnapshot().SnapshotID still matches the planned snapshot ID. If it differs, return errStalePlan which propagates immediately (not retried, since the plan itself is invalid). Also fix rewriteManifests to derive SequenceNumber from the fresh metadata (cs.SequenceNumber) instead of the captured currentSnap. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add compare-and-swap to updateTableMetadataXattr updateTableMetadataXattr previously re-read the entry but did not verify the metadataVersion matched what commitWithRetry had loaded. A concurrent update could be silently clobbered. Now accepts expectedVersion parameter and compares it against the stored metadataVersion before writing. Returns errMetadataVersionConflict on mismatch, which commitWithRetry treats as retryable (deletes the staged metadata file and retries with fresh state). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Export shared plugin worker helpers for use by sub-packages Export ShouldSkipDetectionByInterval, BuildExecutorActivity, and BuildDetectorActivity so the iceberg sub-package can reuse them without duplicating logic. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Refactor iceberg maintenance handler into weed/plugin/worker/iceberg package Split the 1432-line iceberg_maintenance_handler.go into focused files in a new iceberg sub-package: handler.go, config.go, detection.go, operations.go, filer_io.go, and compact.go (Phase 2 data compaction). Key changes: - Rename types to drop stutter (IcebergMaintenanceHandler → Handler, etc.) - Fix loadFileByIcebergPath to preserve nested directory paths via normalizeIcebergPath instead of path.Base which dropped subdirectories - Check SendProgress errors instead of discarding them - Add stale-plan guard to compactDataFiles commitWithRetry closure - Add "compact" operation to parseOperations canonical order - Duplicate readStringConfig/readInt64Config helpers (~20 lines) - Update worker_runtime.go to import new iceberg sub-package Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Remove iceberg_maintenance from default plugin worker job types Iceberg maintenance is not yet ready to be enabled by default. Workers can still opt in by explicitly listing iceberg_maintenance in their job types configuration. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Clamp config values to safe minimums in ParseConfig Prevents misconfiguration by enforcing minimum values using the default constants for all config fields. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Harden filer I/O: path helpers, strict CAS guard, path traversal prevention - Use path.Dir/path.Base instead of strings.SplitN in loadCurrentMetadata - Make CAS guard error on missing or unparseable metadataVersion - Add path.Clean and traversal validation in loadFileByIcebergPath Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix compact: single snapshot ID, oversized bin splitting, ensureFilerDir - Use single newSnapID for all manifest entries in a compaction run - Add splitOversizedBin to break bins exceeding targetSize - Make ensureFilerDir only create on NotFound, propagate other errors Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add wildcard filters, scan limit, and context cancellation to table scanning - Use wildcard matchers (, ?) for bucket/namespace/table filters - Add limit parameter to scanTablesForMaintenance for early termination - Add ctx.Done() checks in bucket and namespace scan loops - Update filter UI descriptions and placeholders for wildcard support Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> Remove dead detection interval check and validate namespace parameter - Remove ineffective ShouldSkipDetectionByInterval call with hardcoded 0 - Add namespace to required parameter validation in Execute Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Improve operations: exponential backoff, orphan matching, full file cleanup - Use exponential backoff (50ms, 100ms, 200ms, ...) in commitWithRetry - Use normalizeIcebergPath for orphan matching instead of fragile suffix check - Add collectSnapshotFiles to traverse manifest lists → manifests → data files - Delete all unreferenced files after expiring snapshots, not just manifest lists - Refactor removeOrphans to reuse collectSnapshotFiles Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * iceberg: fix ensureFilerDir to handle filer_pb.ErrNotFound sentinel filer_pb.LookupEntry converts gRPC NotFound errors to filer_pb.ErrNotFound (a plain sentinel), so status.Code() never returns codes.NotFound for that error. This caused ensureFilerDir to return an error instead of creating the directory when it didn't exist. * iceberg: clean up orphaned artifacts when compaction commit fails Track all files written during compaction (merged data files, manifest, manifest list) and delete them if the commit or any subsequent write step fails, preventing orphaned files from accumulating in the filer. * iceberg: derive tablePath from namespace/tableName when empty An empty table_path parameter would be passed to maintenance operations unchecked. Default it to path.Join(namespace, tableName) when not provided. * iceberg: make collectSnapshotFiles return error on read/parse failure Previously, errors reading manifests were logged and skipped, returning a partial reference set. This could cause incorrect delete decisions during snapshot expiration or orphan cleanup. Now the function returns an error and all callers abort when reference data is incomplete. * iceberg: include active metadata file in removeOrphans referenced set The metadataFileName returned by loadCurrentMetadata was discarded, so the active metadata file could be incorrectly treated as an orphan and deleted. Capture it and add it to the referencedFiles map. * iceberg: only retry commitWithRetry on metadata version conflicts Previously all errors from updateTableMetadataXattr triggered retries. Now only errMetadataVersionConflict causes retry; other errors (permissions, transport, malformed xattr) fail immediately. * iceberg: respect req.Limit in fakeFilerServer.ListEntries mock The mock ListEntries ignored the Limit field, so tests couldn't exercise pagination. Now it stops streaming once Limit entries have been sent. * iceberg: validate parquet schema compatibility before merging files mergeParquetFiles now compares each source file's schema against the first file's schema and aborts with a clear error if they differ, instead of blindly writing rows that could panic or produce corrupt output. * iceberg: normalize empty JobType to canonical jobType in Execute events When request.Job.JobType is empty, status events and completion messages were emitted with a blank job type. Derive a canonical value early and use it consistently in all outbound events. * iceberg: log warning on unexpected config value types in read helpers readStringConfig and readInt64Config now log a V(1) warning when they encounter an unhandled ConfigValue kind, aiding debugging of unexpected config types that silently fall back to defaults. * worker: add iceberg_maintenance to default plugin worker job types Workers using the default job types list didn't advertise the iceberg_maintenance handler despite the handler and canonical name being registered. Add it so workers pick up the handler by default. * iceberg: use defer and detached context for compaction artifact cleanup The cleanup closure used the job context which could already be canceled, and was not called on ctx.Done() early exits. Switch to a deferred cleanup with a detached context (30s timeout) so artifact deletion completes on all exit paths including context cancellation. * iceberg: use proportional jitter in commitWithRetry backoff Fixed 25ms max jitter becomes insignificant at higher retry attempts. Use 0-20% of the current backoff value instead so jitter scales with the exponential delay. * iceberg: add malformed filename cases to extractMetadataVersion test Cover edge cases like "invalid.metadata.json", "metadata.json", "", and "v.metadata.json" to ensure the function returns 0 for unparseable inputs. * iceberg: fail compaction on manifest read errors and skip delete manifests Previously, unreadable manifests were silently skipped during compaction, which could drop live files from the entry set. Now manifest read/parse errors are returned as fatal errors. Also abort compaction when delete manifests exist since the compactor does not apply deletes — carrying them through unchanged could produce incorrect results. * iceberg: use table-relative path for active metadata file in orphan scan metadataFileName was stored as a basename (e.g. "v1.metadata.json") but the orphan scanner matches against table-relative paths like "metadata/v1.metadata.json". Prefix with "metadata/" so the active metadata file is correctly recognized as referenced. * iceberg: fix MetadataBuilderFromBase location to use metadata file path The second argument to MetadataBuilderFromBase records the previous metadata file in the metadata log. Using meta.Location() (the table root) was incorrect — it must be the actual metadata file path so old metadata files can be tracked and eventually cleaned up. * iceberg: update metadataLocation and versionToken in xattr on commit updateTableMetadataXattr was only updating metadataVersion, modifiedAt, and fullMetadata but not metadataLocation or versionToken. This left catalog state inconsistent after maintenance commits — the metadataLocation still pointed to the old metadata file and the versionToken was stale. Add a newMetadataLocation parameter and regenerate the versionToken on every commit, matching the S3 Tables handler behavior. * iceberg: group manifest entries by partition spec in rewriteManifests rewriteManifests was writing all entries into a single manifest using the table's current partition spec. For spec-evolved tables where manifests reference different partition specs, this produces an invalid manifest. Group entries by the source manifest's PartitionSpecID and write one merged manifest per spec, looking up each spec from the table's PartitionSpecs list. * iceberg: remove dead code loop for non-data manifests in compaction The early abort guard at the top of compactDataFiles already ensures no delete manifests are present. The loop that copied non-data manifests into allManifests was unreachable dead code. * iceberg: use JSON encoding in partitionKey for unambiguous grouping partitionKey used fmt.Sprintf("%d=%v") joined by commas, which produces ambiguous keys when partition values contain commas or '='. Use json.Marshal for values and NUL byte as separator to eliminate collisions. * iceberg: precompute normalized reference set in removeOrphans The orphan check was O(files × refs) because it normalized each reference path inside the per-file loop. Precompute the normalized set once for O(1) lookups per candidate file. * iceberg: add artifact cleanup to rewriteManifests on commit failure rewriteManifests writes merged manifests and a manifest list to the filer before committing but did not clean them up on failure. Add the same deferred cleanup pattern used by compactDataFiles: track written artifacts and delete them if the commit does not succeed. * iceberg: pass isDeleteData=true in deleteFilerFile deleteFilerFile called DoRemove with isDeleteData=false, which only removed filer metadata and left chunk data behind on volume servers. All other data-file deletion callers in the codebase pass true. * iceberg: clean up test: remove unused snapID, simplify TestDetectWithFakeFiler Remove unused snapID variable and eliminate the unnecessary second fake filer + entry copy in TestDetectWithFakeFiler by capturing the client from the first startFakeFiler call. * fix: update TestWorkerDefaultJobTypes to expect 5 job types The test expected 4 default job types but iceberg_maintenance was added as a 5th default in a previous commit. * iceberg: document client-side CAS TOCTOU limitation in updateTableMetadataXattr Add a note explaining the race window where two workers can both pass the version check and race at UpdateEntry. The proper fix requires server-side precondition support on UpdateEntryRequest. * iceberg: remove unused sender variable in TestFullExecuteFlow * iceberg: abort compaction when multiple partition specs are present The compactor writes all entries into a single manifest using the current partition spec, which is invalid for spec-evolved tables. Detect multiple PartitionSpecIDs and skip compaction until per-spec compaction is implemented. * iceberg: validate tablePath to prevent directory traversal Sanitize the table_path parameter with path.Clean and verify it matches the expected namespace/tableName prefix to prevent path traversal attacks via crafted job parameters. * iceberg: cap retry backoff at 5s and make it context-aware The exponential backoff could grow unbounded and blocked on time.Sleep ignoring context cancellation. Cap at 5s and use a timer with select on ctx.Done so retries respect cancellation. * iceberg: write manifest list with new snapshot identity in rewriteManifests The manifest list was written with the old snapshot's ID and sequence number, but the new snapshot created afterwards used a different identity. Compute newSnapshotID and newSeqNum before writing manifests and the manifest list so all artifacts are consistent. * ec: also remove .vif file in removeEcVolumeFiles removeEcVolumeFiles cleaned up .ecx, .ecj, and shard files but not the .vif volume info file, leaving it orphaned. The .vif file lives in the data directory alongside shard files. The directory handling for index vs data files was already correct: .ecx/.ecj are removed from IdxDirectory and shard files from Directory, matching how NewEcVolume loads them. Revert "ec: also remove .vif file in removeEcVolumeFiles" This reverts commit `acc82449e1`. * iceberg: skip orphan entries with nil Attributes instead of defaulting to epoch When entry.Attributes is nil, mtime defaulted to Unix epoch (1970), making unknown-age entries appear ancient and eligible for deletion. Skip these entries instead to avoid deleting files whose age cannot be determined. * iceberg: use unique metadata filenames to prevent concurrent write clobbering Add timestamp nonce to metadata filenames (e.g. v3-1709766000.metadata.json) so concurrent writers stage to distinct files. Update extractMetadataVersion to strip the nonce suffix, and loadCurrentMetadata to read the actual filename from the metadataLocation xattr field. * iceberg: defer artifact tracking until data file builder succeeds Move the writtenArtifacts append to after NewDataFileBuilder succeeds, so a failed builder doesn't leave a stale entry for an already-deleted file in the cleanup list. * iceberg: use detached context for metadata file cleanup Use context.WithTimeout(context.Background(), 10s) when deleting staged metadata files after CAS failure, so cleanup runs even if the original request context is canceled. * test: update default job types count to include iceberg_maintenance * iceberg: use parquet.EqualNodes for structural schema comparison Replace String()-based schema comparison with parquet.EqualNodes which correctly compares types, repetition levels, and logical types. * iceberg: add nonce-suffixed filename cases to TestExtractMetadataVersion * test: assert iceberg_maintenance is present in default job types * iceberg: validate operations config early in Detect Call parseOperations in Detect so typos in the operations config fail fast before emitting proposals, matching the validation already done in Execute. * iceberg: detect chunked files in loadFileByIcebergPath Return an explicit error when a file has chunks but no inline content, rather than silently returning empty data. Data files uploaded via S3 are stored as chunks, so compaction would otherwise produce corrupt merged files. --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>	3 days ago
Chris Lu	18ccc9b773	Plugin scheduler: sequential iterations with max runtime (#8496 ) * pb: add job type max runtime setting * plugin: default job type max runtime * plugin: redesign scheduler loop * admin ui: update scheduler settings * plugin: fix scheduler loop state name * plugin scheduler: restore backlog skip * plugin scheduler: drop legacy detection helper * admin api: require scheduler config body * admin ui: preserve detection interval on save * plugin scheduler: use job context and drain cancels * plugin scheduler: respect detection intervals * plugin scheduler: gate runs and drain queue * ec test: reuse req/resp vars * ec test: add scheduler debug logs * Adjust scheduler idle sleep and initial run delay * Clear pending job queue before scheduler runs * Log next detection time in EC integration test * Improve plugin scheduler debug logging in EC test * Expose scheduler next detection time * Log scheduler next detection time in EC test * Wake scheduler on config or worker updates * Expose scheduler sleep interval in UI * Fix scheduler sleep save value selection * Set scheduler idle sleep default to 613s * Show scheduler next run time in plugin UI --------- Co-authored-by: Copilot <copilot@github.com>	6 days ago
Chris Lu	e1e5b4a8a6	add admin script worker (#8491 ) * admin: add plugin lock coordination * shell: allow bypassing lock checks * plugin worker: add admin script handler * mini: include admin_script in plugin defaults * admin script UI: drop name and enlarge text * admin script: add default script * admin_script: make run interval configurable * plugin: gate other jobs during admin_script runs * plugin: use last completed admin_script run * admin: backfill plugin config defaults * templ Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * comparable to default version Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * default to run Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * format Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * shell: respect pre-set noLock for fix.replication * shell: add force no-lock mode for admin scripts * volume balance worker already exists Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * admin: expose scheduler status JSON * shell: add sleep command * shell: restrict sleep syntax * Revert "shell: respect pre-set noLock for fix.replication" This reverts commit `2b14e8b826`. * templ Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * fix import Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * less logs Co-Authored-By: Copilot <223556219+Copilot@users.noreply.github.com> * Reduce master client logs on canceled contexts * Update mini default job type count --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	7 days ago
Chris Lu	f5c35240be	Add volume dir tags and EC placement priority (#8472 ) * Add volume dir tags to topology Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add preferred tag config for EC Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Prioritize EC destinations by tags Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add EC placement planner tag tests Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Refactor EC placement tests to reuse buildActiveTopology Remove buildActiveTopologyWithDiskTags helper function and consolidate tag setup inline in test cases. Tests now use UpdateTopology to apply tags after topology creation, reusing the existing buildActiveTopology function rather than duplicating its logic. All tag scenario tests pass: - TestECPlacementPlannerPrefersTaggedDisks - TestECPlacementPlannerFallsBackWhenTagsInsufficient Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Consolidate normalizeTagList into shared util package Extract normalizeTagList from three locations (volume.go, detection.go, erasure_coding_handler.go) into new weed/util/tag.go as exported NormalizeTagList function. Replace all duplicate implementations with imports and calls to util.NormalizeTagList. This improves code reuse and maintainability by centralizing tag normalization logic. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add PreferredTags to EC config persistence Add preferred_tags field to ErasureCodingTaskConfig protobuf with field number 5. Update GetConfigSpec to include preferred_tags field in the UI configuration schema. Add PreferredTags to ToTaskPolicy to serialize config to protobuf. Add PreferredTags to FromTaskPolicy to deserialize from protobuf with defensive copy to prevent external mutation. This allows EC preferred tags to be persisted and restored across worker restarts. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add defensive copy for Tags slice in DiskLocation Copy the incoming tags slice in NewDiskLocation instead of storing by reference. This prevents external callers from mutating the DiskLocation.Tags slice after construction, improving encapsulation and preventing unexpected changes to disk metadata. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add doc comment to buildCandidateSets method Document the tiered candidate selection and fallback behavior. Explain that for a planner with preferredTags, it accumulates disks matching each tag in order into progressively larger tiers, emits a candidate set once a tier reaches shardsNeeded, and finally falls back to the full candidates set if preferred-tag tiers are insufficient. This clarifies the intended semantics for future maintainers. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Apply final PR review fixes 1. Update parseVolumeTags to replicate single tag entry to all folders instead of leaving some folders with nil tags. This prevents nil pointer dereferences when processing folders without explicit tags. 2. Add defensive copy in ToTaskPolicy for PreferredTags slice to match the pattern used in FromTaskPolicy, preventing external mutation of the returned TaskPolicy. 3. Add clarifying comment in buildCandidateSets explaining that the shardsNeeded <= 0 branch is a defensive check for direct callers, since selectDestinations guarantees shardsNeeded > 0. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Fix nil pointer dereference in parseVolumeTags Ensure all folder tags are initialized to either normalized tags or empty slices, not nil. When multiple tag entries are provided and there are more folders than entries, remaining folders now get empty slices instead of nil, preventing nil pointer dereference in downstream code. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Fix NormalizeTagList to return empty slice instead of nil Change NormalizeTagList to always return a non-nil slice. When all tags are empty or whitespace after normalization, return an empty slice instead of nil. This prevents nil pointer dereferences in downstream code that expects a valid (possibly empty) slice. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add nil safety check for v.tags pointer Add a safety check to handle the case where v.tags might be nil, preventing a nil pointer dereference. If v.tags is nil, use an empty string instead. This is defensive programming to prevent panics in edge cases. Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * Add volume.tags flag to weed server and weed mini commands Add the volume.tags CLI option to both the 'weed server' and 'weed mini' commands. This allows users to specify disk tags when running the combined server modes, just like they can with 'weed volume'. The flag uses the same format and description as the volume command: comma-separated tag groups per data dir with ':' separators (e.g. fast:ssd,archive). Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>	1 week ago
Chris Lu	4f647e1036	Worker set its working directory (#8461 ) * set working directory * consolidate to worker directory * working directory * correct directory name * refactoring to use wildcard matcher * simplify * cleaning ec working directory * fix reference * clean * adjust test	2 weeks ago
Chris Lu	cf3b7b3ad7	adjust weight	2 weeks ago
Chris Lu	09a1ace53a	adjust display name	2 weeks ago
Chris Lu	d2b92938ee	Make EC detection context aware (#8449 ) * Make EC detection context aware * Update register.go * Speed up EC detection planning * Add tests for EC detection planner * optimizations detection.go: extracted ParseCollectionFilter (exported) and feed it into the detection loop so both detection and tracing share the same parsing/whitelisting logic; the detection loop now iterates on a sorted list of volume IDs, checks the context at every iteration, and only sets hasMore when there are still unprocessed groups after hitting maxResults, keeping runtime bounded while still scheduling planned tasks before returning the results. erasure_coding_handler.go: dropped the duplicated inline filter parsing in emitErasureCodingDetectionDecisionTrace and now reuse erasurecodingtask.ParseCollectionFilter, and the summary suffix logic now only accounts for the hasMore case that can actually happen. detection_test.go: updated the helper topology builder to use master_pb.VolumeInformationMessage (matching the current protobuf types) and tightened the cancellation/max-results tests so they reliably exercise the detection logic (cancel before calling Detection, and provide enough disks so one result is produced before the limit). * use working directory * fix compilation * fix compilation * rename * go vet * fix getenv * address comments, fix error	2 weeks ago
Anton	427c975ff3	fix(plugin/worker): make VacuumHandler report MaxExecutionConcurrency from worker startup flag (#8435 ) * fix(plugin/worker): make VacuumHandler report MaxExecutionConcurrency from worker startup flag Previously, MaxExecutionConcurrency was hardcoded to 2 in VacuumHandler.Capability(). The scheduler's schedulerWorkerExecutionLimit() takes the minimum of the UI-configured PerWorkerExecutionConcurrency and the worker-reported capability limit, so the hardcoded value silently capped each worker to 2 concurrent vacuum executions regardless of the --max-execute flag passed at worker startup. Pass maxExecutionConcurrency into NewVacuumHandler() and wire it through buildPluginWorkerHandler/buildPluginWorkerHandlers so the capability reflects the actual worker configuration. The default falls back to 2 when the value is unset or zero. * Update weed/command/worker_runtime.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Anton Ustyugov <anton@devops> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2 weeks ago
Chris Lu	998c8d2702	Worker maintenance tasks now use non-default grpcPort if configured (#8407 ) Fixes #8401 When creating balance/vacuum tasks, the worker maintenance scheduler was accidentally discarding the custom grpcPort defined on the DataNodeInfo by using just its HTTP Address string, which defaults to +10000 during grpc dialing. By using pb.NewServerAddressFromDataNode, the grpcPort suffix is correctly encoded in the server address string, preventing connection refused errors for users running volume servers with custom gRPC ports.	2 weeks ago
Аlexey Medvedev	6a3a97333f	Add support for TLS in gRPC communication between worker and volume server (#8370 ) * Add support for TLS in gRPC communication between worker and volume server * address comments * worker: capture shared grpc.DialOption in BalanceTask registration closure * worker: capture shared grpc.DialOption in ErasureCodingTask registration closure * worker: capture shared grpc.DialOption in VacuumTask registration closure * worker: use grpc.worker security configuration section for tasks * plugin/worker: fix compilation errors by passing grpc.DialOption to task constructors * plugin/worker: prevent double-counting in EC skip counters --------- Co-authored-by: Chris Lu <chris.lu@gmail.com>	3 weeks ago
Chris Lu	8ec9ff4a12	Refactor plugin system and migrate worker runtime (#8369 ) * admin: add plugin runtime UI page and route wiring * pb: add plugin gRPC contract and generated bindings * admin/plugin: implement worker registry, runtime, monitoring, and config store * admin/dash: wire plugin runtime and expose plugin workflow APIs * command: add flags to enable plugin runtime * admin: rename remaining plugin v2 wording to plugin * admin/plugin: add detectable job type registry helper * admin/plugin: add scheduled detection and dispatch orchestration * admin/plugin: prefetch job type descriptors when workers connect * admin/plugin: add known job type discovery API and UI * admin/plugin: refresh design doc to match current implementation * admin/plugin: enforce per-worker scheduler concurrency limits * admin/plugin: use descriptor runtime defaults for scheduler policy * admin/ui: auto-load first known plugin job type on page open * admin/plugin: bootstrap persisted config from descriptor defaults * admin/plugin: dedupe scheduled proposals by dedupe key * admin/ui: add job type and state filters for plugin monitoring * admin/ui: add per-job-type plugin activity summary * admin/plugin: split descriptor read API from schema refresh * admin/ui: keep plugin summary metrics global while tables are filtered * admin/plugin: retry executor reservation before timing out * admin/plugin: expose scheduler states for monitoring * admin/ui: show per-job-type scheduler states in plugin monitor * pb/plugin: rename protobuf package to plugin * admin/plugin: rename pluginRuntime wiring to plugin * admin/plugin: remove runtime naming from plugin APIs and UI * admin/plugin: rename runtime files to plugin naming * admin/plugin: persist jobs and activities for monitor recovery * admin/plugin: lease one detector worker per job type * admin/ui: show worker load from plugin heartbeats * admin/plugin: skip stale workers for detector and executor picks * plugin/worker: add plugin worker command and stream runtime scaffold * plugin/worker: implement vacuum detect and execute handlers * admin/plugin: document external vacuum plugin worker starter * command: update plugin.worker help to reflect implemented flow * command/admin: drop legacy Plugin V2 label * plugin/worker: validate vacuum job type and respect min interval * plugin/worker: test no-op detect when min interval not elapsed * command/admin: document plugin.worker external process * plugin/worker: advertise configured concurrency in hello * command/plugin.worker: add jobType handler selection * command/plugin.worker: test handler selection by job type * command/plugin.worker: persist worker id in workingDir * admin/plugin: document plugin.worker jobType and workingDir flags * plugin/worker: support cancel request for in-flight work * plugin/worker: test cancel request acknowledgements * command/plugin.worker: document workingDir and jobType behavior * plugin/worker: emit executor activity events for monitor * plugin/worker: test executor activity builder * admin/plugin: send last successful run in detection request * admin/plugin: send cancel request when detect or execute context ends * admin/plugin: document worker cancel request responsibility * admin/handlers: expose plugin scheduler states API in no-auth mode * admin/handlers: test plugin scheduler states route registration * admin/plugin: keep worker id on worker-generated activity records * admin/plugin: test worker id propagation in monitor activities * admin/dash: always initialize plugin service * command/admin: remove plugin enable flags and default to enabled * admin/dash: drop pluginEnabled constructor parameter * admin/plugin UI: stop checking plugin enabled state * admin/plugin: remove docs for plugin enable flags * admin/dash: remove unused plugin enabled check method * admin/dash: fallback to in-memory plugin init when dataDir fails * admin/plugin API: expose worker gRPC port in status * command/plugin.worker: resolve admin gRPC port via plugin status * split plugin UI into overview/configuration/monitoring pages * Update layout_templ.go * add volume_balance plugin worker handler * wire plugin.worker CLI for volume_balance job type * add erasure_coding plugin worker handler * wire plugin.worker CLI for erasure_coding job type * support multi-job handlers in plugin worker runtime * allow plugin.worker jobType as comma-separated list * admin/plugin UI: rename to Workers and simplify config view * plugin worker: queue detection requests instead of capacity reject * Update plugin_worker.go * plugin volume_balance: remove force_move/timeout from worker config UI * plugin erasure_coding: enforce local working dir and cleanup * admin/plugin UI: rename admin settings to job scheduling * admin/plugin UI: persist and robustly render detection results * admin/plugin: record and return detection trace metadata * admin/plugin UI: show detection process and decision trace * plugin: surface detector decision trace as activities * mini: start a plugin worker by default * admin/plugin UI: split monitoring into detection and execution tabs * plugin worker: emit detection decision trace for EC and balance * admin workers UI: split monitoring into detection and execution pages * plugin scheduler: skip proposals for active assigned/running jobs * admin workers UI: add job queue tab * plugin worker: add dummy stress detector and executor job type * admin workers UI: reorder tabs to detection queue execution * admin workers UI: regenerate plugin template * plugin defaults: include dummy stress and add stress tests * plugin dummy stress: rotate detection selections across runs * plugin scheduler: remove cross-run proposal dedupe * plugin queue: track pending scheduled jobs * plugin scheduler: wait for executor capacity before dispatch * plugin scheduler: skip detection when waiting backlog is high * plugin: add disk-backed job detail API and persistence * admin ui: show plugin job detail modal from job id links * plugin: generate unique job ids instead of reusing proposal ids * plugin worker: emit heartbeats on work state changes * plugin registry: round-robin tied executor and detector picks * add temporary EC overnight stress runner * plugin job details: persist and render EC execution plans * ec volume details: color data and parity shard badges * shard labels: keep parity ids numeric and color-only distinction * admin: remove legacy maintenance UI routes and templates * admin: remove dead maintenance endpoint helpers * Update layout_templ.go * remove dummy_stress worker and command support * refactor plugin UI to job-type top tabs and sub-tabs * migrate weed worker command to plugin runtime * remove plugin.worker command and keep worker runtime with metrics * update helm worker args for jobType and execution flags * set plugin scheduling defaults to global 16 and per-worker 4 * stress: fix RPC context reuse and remove redundant variables in ec_stress_runner * admin/plugin: fix lifecycle races, safe channel operations, and terminal state constants * admin/dash: randomize job IDs and fix priority zero-value overwrite in plugin API * admin/handlers: implement buffered rendering to prevent response corruption * admin/plugin: implement debounced persistence flusher and optimize BuildJobDetail memory lookups * admin/plugin: fix priority overwrite and implement bounded wait in scheduler reserve * admin/plugin: implement atomic file writes and fix run record side effects * admin/plugin: use P prefix for parity shard labels in execution plans * admin/plugin: enable parallel execution for cancellation tests * admin: refactor time.Time fields to pointers for better JSON omitempty support * admin/plugin: implement pointer-safe time assignments and comparisons in plugin core * admin/plugin: fix time assignment and sorting logic in plugin monitor after pointer refactor * admin/plugin: update scheduler activity tracking to use time pointers * admin/plugin: fix time-based run history trimming after pointer refactor * admin/dash: fix JobSpec struct literal in plugin API after pointer refactor * admin/view: add D/P prefixes to EC shard badges for UI consistency * admin/plugin: use lifecycle-aware context for schema prefetching * Update ec_volume_details_templ.go * admin/stress: fix proposal sorting and log volume cleanup errors * stress: refine ec stress runner with math/rand and collection name - Added Collection field to VolumeEcShardsDeleteRequest for correct filename construction. - Replaced crypto/rand with seeded math/rand PRNG for bulk payloads. - Added documentation for EcMinAge zero-value behavior. - Added logging for ignored errors in volume/shard deletion. * admin: return internal server error for plugin store failures Changed error status code from 400 Bad Request to 500 Internal Server Error for failures in GetPluginJobDetail to correctly reflect server-side errors. * admin: implement safe channel sends and graceful shutdown sync - Added sync.WaitGroup to Plugin struct to manage background goroutines. - Implemented safeSendCh helper using recover() to prevent panics on closed channels. - Ensured Shutdown() waits for all background operations to complete. * admin: robustify plugin monitor with nil-safe time and record init - Standardized nil-safe assignment for time.Time pointers (CreatedAt, UpdatedAt, CompletedAt). - Ensured persistJobDetailSnapshot initializes new records correctly if they don't exist on disk. - Fixed debounced persistence to trigger immediate write on job completion. admin: improve scheduler shutdown behavior and logic guards - Replaced brittle error string matching with explicit r.shutdownCh selection for shutdown detection. - Removed redundant nil guard in buildScheduledJobSpec. - Standardized WaitGroup usage for schedulerLoop. * admin: implement deep copy for job parameters and atomic write fixes - Implemented deepCopyGenericValue and used it in cloneTrackedJob to prevent shared state. - Ensured atomicWriteFile creates parent directories before writing. * admin: remove unreachable branch in shard classification Removed an unreachable 'totalShards <= 0' check in classifyShardID as dataShards and parityShards are already guarded. * admin: secure UI links and use canonical shard constants - Added rel="noopener noreferrer" to external links for security. - Replaced magic number 14 with erasure_coding.TotalShardsCount. - Used renderEcShardBadge for missing shard list consistency. * admin: stabilize plugin tests and fix regressions - Composed a robust plugin_monitor_test.go to handle asynchronous persistence. - Updated all time.Time literals to use timeToPtr helper. - Added explicit Shutdown() calls in tests to synchronize with debounced writes. - Fixed syntax errors and orphaned struct literals in tests. * Potential fix for code scanning alert no. 278: Slice memory allocation with excessive size value Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * Potential fix for code scanning alert no. 283: Uncontrolled data used in path expression Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * admin: finalize refinements for error handling, scheduler, and race fixes - Standardized HTTP 500 status codes for store failures in plugin_api.go. - Tracked scheduled detection goroutines with sync.WaitGroup for safe shutdown. - Fixed race condition in safeSendDetectionComplete by extracting channel under lock. - Implemented deep copy for JobActivity details. - Used defaultDirPerm constant in atomicWriteFile. * test(ec): migrate admin dockertest to plugin APIs * admin/plugin_api: fix RunPluginJobTypeAPI to return 500 for server-side detection/filter errors * admin/plugin_api: fix ExecutePluginJobAPI to return 500 for job execution failures * admin/plugin_api: limit parseProtoJSONBody request body to 1MB to prevent unbounded memory usage * admin/plugin: consolidate regex to package-level validJobTypePattern; add char validation to sanitizeJobID * admin/plugin: fix racy Shutdown channel close with sync.Once * admin/plugin: track sendLoop and recv goroutines in WorkerStream with r.wg * admin/plugin: document writeProtoFiles atomicity — .pb is source of truth, .json is human-readable only * admin/plugin: extract activityLess helper to deduplicate nil-safe OccurredAt sort comparators * test/ec: check http.NewRequest errors to prevent nil req panics * test/ec: replace deprecated ioutil/math/rand, fix stale step comment 5.1→3.1 * plugin(ec): raise default detection and scheduling throughput limits * topology: include empty disks in volume list and EC capacity fallback * topology: remove hard 10-task cap for detection planning * Update ec_volume_details_templ.go * adjust default * fix tests --------- Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com>	3 weeks ago

20 Commits (d6fa3c933138f655101f04fcf495256f20d3bf5b)