seaweedfs

Commit Graph

Author	SHA1	Message	Date
Chris Lu	a1cb1dc90f	Integrate health tracking with S3 failover Address code review suggestion to leverage existing health tracking instead of simple iteration through all filers. Changes: 1. Added address-based health tracking API to FilerClient: - ShouldSkipUnhealthyFiler(addr) - check circuit breaker - RecordFilerSuccess(addr) - reset failure count - RecordFilerFailure(addr) - increment failure count These methods find the filer by address and delegate to existing WithHealth methods for actual health management. 2. Updated withFilerClientFailover to use health tracking: - Record success/failure for every filer attempt - Skip unhealthy filers during failover (circuit breaker) - Only try filers that haven't exceeded failure threshold - Automatic re-check after reset timeout Benefits:* ✅ Circuit breaker prevents wasting time on known-bad filers ✅ Health tracking shared across all operations ✅ Automatic recovery when unhealthy filers come back ✅ Reduced latency - skip filers in failure state ✅ Better visibility with health metrics Behavior: - Try current filer first (fast path) - If fails, record failure and try other HEALTHY filers - Skip filers with failureCount >= threshold (default 3) - Re-check unhealthy filers after resetTimeout (default 30s) - Record all successes/failures for health tracking	1 week ago
Chris Lu	9e00484c21	Update current filer after successful failover Address code review: https://github.com/seaweedfs/seaweedfs/pull/7550#pullrequestreview-3512223723 Issue: After successful failover, the current filer index was not updated. This meant every subsequent request would still try the (potentially unhealthy) original filer first, then failover again. Solution: 1. Added FilerClient.SetCurrentFiler(addr) method: - Finds the index of specified filer address - Atomically updates filerIndex to point to it - Thread-safe with RLock 2. Call SetCurrentFiler after successful failover: - Update happens immediately after successful connection - Future requests start with the known-healthy filer - Reduces unnecessary failover attempts Benefits: ✅ Subsequent requests use healthy filer directly ✅ No repeated failover to same unhealthy filer ✅ Better performance - fast path hits healthy filer ✅ Comment now matches actual behavior	1 week ago
Chris Lu	93c3e432a8	Fix S3 WithFilerClient to use filer failover Critical fix for multi-filer deployments: Problem: - S3ApiServer.WithFilerClient() was creating direct connections to ONE filer - Used pb.WithGrpcClient() with single filer address - No failover - if that filer failed, ALL operations failed - Caused test failures: "bucket directory not found" - IAM Integration Tests failing with 500 Internal Error Root Cause: - WithFilerClient bypassed filerClient connection management - Always connected to getFilerAddress() (current filer only) - Didn't retry other filers on failure - All getEntry(), updateEntry(), etc. operations failed if current filer down Solution: 1. Added FilerClient.GetAllFilers() method - Returns snapshot of all filer addresses - Thread-safe copy to avoid races 2. Implemented withFilerClientFailover() - Try current filer first (fast path) - On failure, try all other filers - Log successful failover - Return error only if ALL filers fail 3. Updated WithFilerClient() - Use filerClient for failover when available - Fallback to direct connection for testing/init Impact: ✅ All S3 operations now support multi-filer failover ✅ Bucket metadata reads work with any available filer ✅ Entry operations (getEntry, updateEntry) failover automatically ✅ IAM tests should pass now ✅ Production-ready HA support Files Changed: - wdclient/filer_client.go: Add GetAllFilers() method - s3api/s3api_handlers.go: Implement failover logic This fixes the test failure where bucket operations failed when the primary filer was temporarily unavailable during cleanup.	1 week ago
Chris Lu	4070d62367	Fix hardcoded http scheme and add panic recovery Address CodeRabbit review #3512114811: 1. Major: Fix hardcoded http:// scheme in Location URLs - Location URLs always used http:// regardless of client connection - HTTPS clients got http:// URLs (incorrect) - Fixed: Detect scheme from request - Check X-Forwarded-Proto header (for proxies) first - Check r.TLS != nil for direct HTTPS - Fallback to http for plain connections - Applied to all 4 CompleteMultipartUploadResult locations 2. Major: Add panic recovery to discovery goroutine - Long-running background goroutine could crash entire process - Panic in refreshFilerList would terminate program - Fixed: Add defer recover() with error logging - Goroutine failures now logged, not fatal 3. Note: Close() idempotency already implemented - Review flagged as duplicate issue - Already fixed in commit `3d7a65c7e` - sync.Once (closeDiscoveryOnce) prevents double-close panic - Safe to call Close() multiple times Changes: - filer_multipart.go: - Add getRequestScheme() helper function - Update all 4 Location URLs to use dynamic scheme - Format: scheme://host/bucket/key (was: http://...) - filer_client.go: - Add panic recovery to discoverFilers() - Log panics instead of crashing Benefits: - Correct scheme (https/http) in Location URLs - Works behind proxies (X-Forwarded-Proto) - No process crashes from discovery failures - Production-hardened background goroutine - Proper AWS S3 API compliance	1 week ago
Chris Lu	3d7a65c7e5	Fix race conditions and make Close() idempotent Address CodeRabbit review #3512078995: 1. Critical: Fix unsynchronized read in error message - Line 584 read len(fc.filerAddresses) without lock - Race with refreshFilerList appending to slice - Fixed: Take RLock to read length safely - Prevents race detector warnings 2. Important: Make Close() idempotent - Closing already-closed channel panics - Can happen with layered cleanup in shutdown paths - Fixed: Use sync.Once to ensure single close - Safe to call Close() multiple times now 3. Nitpick: Add warning for empty filer address - getFilerAddress() can return empty string - Helps diagnose unexpected state - Added: Warning log when no filers available 4. Nitpick: Guard deprecated index-based helpers - shouldSkipUnhealthyFiler, recordFilerSuccess/Failure - Accessed filerHealth without lock (races with discovery) - Fixed: Take RLock and check bounds before array access - Prevents index out of bounds and races Changes: - filer_client.go: - Add closeDiscoveryOnce sync.Once field - Use Do() in Close() for idempotent channel close - Add RLock guards to deprecated index-based helpers - Add bounds checking to prevent panics - Synchronized read of filerAddresses length in error - s3api_server.go: - Add warning log when getFilerAddress returns empty Benefits: - No race conditions (passes race detector) - No panic on double-close - Better error diagnostics - Safe with discovery enabled - Production-hardened shutdown logic	1 week ago
Chris Lu	83cc6b0f2d	Fix compilation error and address code review suggestions Address remaining unresolved comments: 1. Fix compilation error: Add missing net/url import - filer_multipart.go used url.PathEscape without import - Added "net/url" to imports 2. Fix Location URL formatting (all 4 occurrences): - Add missing slash between bucket and key - Use url.PathEscape for bucket names - Use urlPathEscape for object keys - Handles special characters in bucket/key names - Before: http://host/bucketkey - After: http://host/bucket/key (properly escaped) 3. Optimize discovery loop (O(N*M) → O(N+M)): - Use map for existing filers (O(1) lookup) - Reduces time holding write lock - Better performance with many filers - Before: Nested loop for each discovered filer - After: Build map once, then O(1) lookups Changes: - filer_multipart.go: Import net/url, fix all Location URLs - filer_client.go: Use map for efficient filer discovery Benefits: - Compiles successfully - Proper URL encoding (handles spaces, special chars) - Faster discovery with less lock contention - Production-ready URL formatting	1 week ago
Chris Lu	d39c362f08	Fix critical race condition and goroutine leak	1 week ago
Chris Lu	1ce9826c36	Address CodeRabbit review: fix buffer reuse and improve lock safety Address two code review suggestions: 1. Fix buffer reuse in ReadFilerConfFromFilers: - Use local []byte data instead of shared buffer - Prevents partial data from failed attempts affecting successful reads - Creates fresh buffer inside callback for masterClient path - More robust to future changes in read helpers 2. Improve lock safety in FilerClient: - Add WithHealth variants that accept health pointer - Get health pointer while holding lock, then release before calling - Eliminates potential for lock confusion (though no actual deadlock existed) - Clearer separation: lock for data access, atomics for health ops Changes: - ReadFilerConfFromFilers: var data []byte, create buf inside callback - shouldSkipUnhealthyFilerWithHealth(health filerHealth) - recordFilerSuccessWithHealth(health filerHealth) - recordFilerFailureWithHealth(health filerHealth) - Keep old functions for backward compatibility (marked deprecated) - Update LookupVolumeIds to use WithHealth variants Benefits: - More robust multi-filer configuration reading - Clearer lock vs atomic operation boundaries - No lock held during health checks (even though atomics don't block) - Better code organization and maintainability	1 week ago
Chris Lu	ee6054700f	Track current active filer in FilerClient for better HA Add GetCurrentFiler() method to FilerClient that returns the currently active filer based on the filerIndex which is updated on successful operations. This provides better availability than always using the first filer. Changes: - Add FilerClient.GetCurrentFiler() method that returns current active filer - Update S3ApiServer.getFilerAddress() to use FilerClient's current filer - Add fallback to first filer if FilerClient not yet initialized - Document IAM limitation (doesn't have FilerClient access) Benefits: - Single-filer operations (URLs, ReadFilerConf, etc.) now use the currently active/healthy filer - Better distribution and failover behavior - FilerClient's round-robin and health tracking automatically determines which filer to use	1 week ago
Chris Lu	60dae3887d	Add filer discovery: treat initial filers as seeds and discover peers from master Enhances FilerClient to automatically discover additional filers in the same filer group by querying the master server. This allows users to specify just a few seed filers, and the client will discover all other filers in the cluster. Key changes to wdclient/FilerClient: - Added MasterClient, FilerGroup, and DiscoveryInterval fields - Added thread-safe filer list management with RWMutex - Implemented discoverFilers() background goroutine - Uses cluster.ListExistingPeerUpdates() to query master for filers - Automatically adds newly discovered filers to the list - Added Close() method to clean up discovery goroutine New FilerClientOption fields: - MasterClient: enables filer discovery from master - FilerGroup: specifies which filer group to discover - DiscoveryInterval: how often to refresh (default 5 minutes) Usage example: masterClient := wdclient.NewMasterClient(...) filerClient := wdclient.NewFilerClient( []pb.ServerAddress{"localhost:8888"}, // seed filers grpcDialOption, dataCenter, &wdclient.FilerClientOption{ MasterClient: masterClient, FilerGroup: "my-group", }, ) defer filerClient.Close() The initial filers act as seeds - the client discovers and adds all other filers in the same group from the master. Discovered filers are added dynamically without removing existing ones (relying on health checks for unavailable filers).	1 week ago
Chris Lu	c1b8d4bf0d	S3: adds FilerClient to use cached volume id (#7518 ) * adds FilerClient to use cached volume id * refactor: MasterClient embeds vidMapClient to eliminate ~150 lines of duplication - Create masterVolumeProvider that implements VolumeLocationProvider - MasterClient now embeds vidMapClient instead of maintaining duplicate cache logic - Removed duplicate methods: LookupVolumeIdsWithFallback, getStableVidMap, etc. - MasterClient still receives real-time updates via KeepConnected streaming - Updates call inherited addLocation/deleteLocation from vidMapClient - Benefits: DRY principle, shared singleflight, cache chain logic reused - Zero behavioral changes - only architectural improvement * refactor: mount uses FilerClient for efficient volume location caching - Add configurable vidMap cache size (default: 5 historical snapshots) - Add FilerClientOption struct for clean configuration * GrpcTimeout: default 5 seconds (prevents hanging requests) * UrlPreference: PreferUrl or PreferPublicUrl * CacheSize: number of historical vidMap snapshots (for volume moves) - NewFilerClient uses option struct for better API extensibility - Improved error handling in filerVolumeProvider.LookupVolumeIds: * Distinguish genuine 'not found' from communication failures * Log volumes missing from filer response * Return proper error context with volume count * Document that filer Locations lacks Error field (unlike master) - FilerClient.GetLookupFileIdFunction() handles URL preference automatically - Mount (WFS) creates FilerClient with appropriate options - Benefits for weed mount: * Singleflight: Deduplicates concurrent volume lookups * Cache history: Old volume locations available briefly when volumes move * Configurable cache depth: Tune for different deployment environments * Battle-tested vidMap cache with cache chain * Better concurrency handling with timeout protection * Improved error visibility and debugging - Old filer.LookupFn() kept for backward compatibility - Performance improvement for mount operations with high concurrency * fix: prevent vidMap swap race condition in LookupFileIdWithFallback - Hold vidMapLock.RLock() during entire vm.LookupFileId() call - Prevents resetVidMap() from swapping vidMap mid-operation - Ensures atomic access to the current vidMap instance - Added documentation warnings to getStableVidMap() about swap risks - Enhanced withCurrentVidMap() documentation for clarity This fixes a subtle race condition where: 1. Thread A: acquires lock, gets vm pointer, releases lock 2. Thread B: calls resetVidMap(), swaps vc.vidMap 3. Thread A: calls vm.LookupFileId() on old/stale vidMap While the old vidMap remains valid (in cache chain), holding the lock ensures we consistently use the current vidMap for the entire operation. * fix: FilerClient supports multiple filer addresses for high availability Critical fix: FilerClient now accepts []ServerAddress instead of single address - Prevents mount failure when first filer is down (regression fix) - Implements automatic failover to remaining filers - Uses round-robin with atomic index tracking (same pattern as WFS.WithFilerClient) - Retries all configured filers before giving up - Updates successful filer index for future requests Changes: - NewFilerClient([]pb.ServerAddress, ...) instead of (pb.ServerAddress, ...) - filerVolumeProvider references FilerClient for failover access - LookupVolumeIds tries all filers with util.Retry pattern - Mount passes all option.FilerAddresses for HA - S3 wraps single filer in slice for API consistency This restores the high availability that existed in the old implementation where mount would automatically failover between configured filers. * fix: restore leader change detection in KeepConnected stream loop Critical fix: Leader change detection was accidentally removed from the streaming loop - Master can announce leader changes during an active KeepConnected stream - Without this check, client continues talking to non-leader until connection breaks - This can lead to stale data or operational errors The check needs to be in TWO places: 1. Initial response (lines 178-187): Detect redirect on first connect 2. Stream loop (lines 203-209): Detect leader changes during active stream Restored the loop check that was accidentally removed during refactoring. This ensures the client immediately reconnects to new leader when announced. * improve: address code review findings on error handling and documentation 1. Master provider now preserves per-volume errors - Surface detailed errors from master (e.g., misconfiguration, deletion) - Return partial results with aggregated errors using errors.Join - Callers can now distinguish specific volume failures from general errors - Addresses issue of losing vidLoc.Error details 2. Document GetMaster initialization contract - Add comprehensive documentation explaining blocking behavior - Clarify that KeepConnectedToMaster must be started first - Provide typical initialization pattern example - Prevent confusing timeouts during warm-up 3. Document partial results API contract - LookupVolumeIdsWithFallback explicitly documents partial results - Clear examples of how to handle result + error combinations - Helps prevent callers from discarding valid partial results 4. Add safeguards to legacy filer.LookupFn - Add deprecation warning with migration guidance - Implement simple 10,000 entry cache limit - Log warning when limit reached - Recommend wdclient.FilerClient for new code - Prevents unbounded memory growth in long-running processes These changes improve API clarity and operational safety while maintaining backward compatibility. * fix: handle partial results correctly in LookupVolumeIdsWithFallback callers Two callers were discarding partial results by checking err before processing the result map. While these are currently single-volume lookups (so partial results aren't possible), the code was fragile and would break if we ever batched multiple volumes together. Changes: - Check result map FIRST, then conditionally check error - If volume is found in result, use it (ignore errors about other volumes) - If volume is NOT found and err != nil, include error context with %w - Add defensive comments explaining the pattern for future maintainers This makes the code: 1. Correct for future batched lookups 2. More informative (preserves underlying error details) 3. Consistent with filer_grpc_server.go which already handles this correctly Example: If looking up ["1", "2", "999"] and only 999 fails, callers looking for volumes 1 or 2 will succeed instead of failing unnecessarily. * improve: address remaining code review findings 1. Lazy initialize FilerClient in mount for proxy-only setups - Only create FilerClient when VolumeServerAccess != "filerProxy" - Avoids wasted work when all reads proxy through filer - filerClient is nil for proxy mode, initialized for direct access 2. Fix inaccurate deprecation comment in filer.LookupFn - Updated comment to reflect current behavior (10k bounded cache) - Removed claim of "unbounded growth" after adding size limit - Still directs new code to wdclient.FilerClient for better features 3. Audit all MasterClient usages for KeepConnectedToMaster - Verified all production callers start KeepConnectedToMaster early - Filer, Shell, Master, Broker, Benchmark, Admin all correct - IAM creates MasterClient but never uses it (harmless) - Test code doesn't need KeepConnectedToMaster (mocks) All callers properly follow the initialization pattern documented in GetMaster(), preventing unexpected blocking or timeouts. * fix: restore observability instrumentation in MasterClient During the refactoring, several important stats counters and logging statements were accidentally removed from tryConnectToMaster. These are critical for monitoring and debugging the health of master client connections. Restored instrumentation: 1. stats.MasterClientConnectCounter("total") - tracks all connection attempts 2. stats.MasterClientConnectCounter(FailedToKeepConnected) - when KeepConnected stream fails 3. stats.MasterClientConnectCounter(FailedToReceive) - when Recv() fails in loop 4. stats.MasterClientConnectCounter(Failed) - when overall gprcErr occurs 5. stats.MasterClientConnectCounter(OnPeerUpdate) - when peer updates detected Additionally restored peer update logging: - "+ filer@host noticed group.type address" for node additions - "- filer@host noticed group.type address" for node removals - Only logs updates matching the client's FilerGroup for noise reduction This information is valuable for: - Monitoring cluster health and connection stability - Debugging cluster membership changes - Tracking master failover and reconnection patterns - Identifying network issues between clients and masters No functional changes - purely observability restoration. * improve: implement gRPC-aware retry for FilerClient volume lookups The previous implementation used util.Retry which only retries errors containing the string "transport". This is insufficient for handling the full range of transient gRPC errors. Changes: 1. Added isRetryableGrpcError() to properly inspect gRPC status codes - Retries: Unavailable, DeadlineExceeded, ResourceExhausted, Aborted - Falls back to string matching for non-gRPC network errors 2. Replaced util.Retry with custom retry loop - 3 attempts with exponential backoff (1s, 1.5s, 2.25s) - Tries all N filers on each attempt (N3 total attempts max) - Fast-fails on non-retryable errors (NotFound, PermissionDenied, etc.) 3. Improved logging - Shows both filer attempt (x/N) and retry attempt (y/3) - Logs retry reason and wait time for debugging Benefits: - Better handling of transient gRPC failures (server restarts, load spikes) - Faster failure for permanent errors (no wasted retries) - More informative logs for troubleshooting - Maintains existing HA failover across multiple filers Example: If all 3 filers return Unavailable (server overload): - Attempt 1: try all 3 filers, wait 1s - Attempt 2: try all 3 filers, wait 1.5s - Attempt 3: try all 3 filers, fail Example: If filer returns NotFound (volume doesn't exist): - Attempt 1: try all 3 filers, fast-fail (no retry) fmt * improve: add circuit breaker to skip known-unhealthy filers The previous implementation tried all filers on every failure, including known-unhealthy ones. This wasted time retrying permanently down filers. Problem scenario (3 filers, filer0 is down): - Last successful: filer1 (saved as filerIndex=1) - Next lookup when filer1 fails: Retry 1: filer1(fail) → filer2(fail) → filer0(fail, wastes 5s timeout) Retry 2: filer1(fail) → filer2(fail) → filer0(fail, wastes 5s timeout) Retry 3: filer1(fail) → filer2(fail) → filer0(fail, wastes 5s timeout) Total wasted: 15 seconds on known-bad filer! Solution: Circuit breaker pattern - Track consecutive failures per filer (atomic int32) - Skip filers with 3+ consecutive failures - Re-check unhealthy filers every 30 seconds - Reset failure count on success New behavior: - filer0 fails 3 times → marked unhealthy - Future lookups skip filer0 for 30 seconds - After 30s, re-check filer0 (allows recovery) - If filer0 succeeds, reset failure count to 0 Benefits: 1. Avoids wasting time on known-down filers 2. Still sticks to last healthy filer (via filerIndex) 3. Allows recovery (30s re-check window) 4. No configuration needed (automatic) Implementation details: - filerHealth struct tracks failureCount (atomic) + lastFailureTime - shouldSkipUnhealthyFiler(): checks if we should skip this filer - recordFilerSuccess(): resets failure count to 0 - recordFilerFailure(): increments count, updates timestamp - Logs when skipping unhealthy filers (V(2) level) Example with circuit breaker: - filer0 down, saved filerIndex=1 (filer1 healthy) - Lookup 1: filer1(ok) → Done (0.01s) - Lookup 2: filer1(fail) → filer2(ok) → Done, save filerIndex=2 (0.01s) - Lookup 3: filer2(fail) → skip filer0 (unhealthy) → filer1(ok) → Done (0.01s) Much better than wasting 15s trying filer0 repeatedly! * fix: OnPeerUpdate should only process updates for matching FilerGroup Critical bug: The OnPeerUpdate callback was incorrectly moved outside the FilerGroup check when restoring observability instrumentation. This caused clients to process peer updates for ALL filer groups, not just their own. Problem: Before: mc.OnPeerUpdate only called for update.FilerGroup == mc.FilerGroup Bug: mc.OnPeerUpdate called for ALL updates regardless of FilerGroup Impact: - Multi-tenant deployments with separate filer groups would see cross-group updates (e.g., group A clients processing group B updates) - Could cause incorrect cluster membership tracking - OnPeerUpdate handlers (like Filer's DLM ring updates) would receive irrelevant updates from other groups Example scenario: Cluster has two filer groups: "production" and "staging" Production filer connects with FilerGroup="production" Incorrect behavior (bug): - Receives "staging" group updates - Incorrectly adds staging filers to production DLM ring - Cross-tenant data access issues Correct behavior (fixed): - Only receives "production" group updates - Only adds production filers to production DLM ring - Proper isolation between groups Fix: Moved mc.OnPeerUpdate(update, time.Now()) back INSIDE the FilerGroup check where it belongs, matching the original implementation. The logging and stats counter were already correctly scoped to matching FilerGroup, so they remain inside the if block as intended. * improve: clarify Aborted error handling in volume lookups Added documentation and logging to address the concern that codes.Aborted might not always be retryable in all contexts. Context-specific justification for treating Aborted as retryable: Volume location lookups (LookupVolume RPC) are simple, read-only operations: - No transactions - No write conflicts - No application-level state changes - Idempotent (safe to retry) In this context, Aborted is most likely caused by: - Filer restarting/recovering (transient) - Connection interrupted mid-request (transient) - Server-side resource cleanup (transient) NOT caused by: - Application-level conflicts (no writes) - Transaction failures (no transactions) - Logical errors (read-only lookup) Changes: 1. Added detailed comment explaining the context-specific reasoning 2. Added V(1) logging when treating Aborted as retryable - Helps detect misclassification if it occurs - Visible in verbose logs for troubleshooting 3. Split switch statement for clarity (one case per line) If future analysis shows Aborted should not be retried, operators will now have visibility via logs to make that determination. The logging provides evidence for future tuning decisions. Alternative approaches considered but not implemented: - Removing Aborted entirely (too conservative for read-only ops) - Message content inspection (adds complexity, no known patterns yet) - Different handling per RPC type (premature optimization) * fix: IAM server must start KeepConnectedToMaster for masterClient usage The IAM server creates and uses a MasterClient but never started KeepConnectedToMaster, which could cause blocking if IAM config files have chunks requiring volume lookups. Problem flow: NewIamApiServerWithStore() → creates masterClient → ❌ NEVER starts KeepConnectedToMaster GetS3ApiConfigurationFromFiler() → filer.ReadEntry(iama.masterClient, ...) → StreamContent(masterClient, ...) if file has chunks → masterClient.GetLookupFileIdFunction() → GetMaster(ctx) ← BLOCKS indefinitely waiting for connection! While IAM config files (identity & policies) are typically small and stored inline without chunks, the code path exists and would block if the files ever had chunks. Fix: Start KeepConnectedToMaster in background goroutine right after creating masterClient, following the documented pattern: mc := wdclient.NewMasterClient(...) go mc.KeepConnectedToMaster(ctx) This ensures masterClient is usable if ReadEntry ever needs to stream chunked content from volume servers. Note: This bug was dormant because IAM config files are small (<256 bytes) and SeaweedFS stores small files inline in Entry.Content, not as chunks. The bug would only manifest if: - IAM config grew > 256 bytes (inline threshold) - Config was stored as chunks on volume servers - ReadEntry called StreamContent - GetMaster blocked indefinitely Now all 9 production MasterClient instances correctly follow the pattern. * fix: data race on filerHealth.lastFailureTime in circuit breaker The circuit breaker tracked lastFailureTime as time.Time, which was written in recordFilerFailure and read in shouldSkipUnhealthyFiler without synchronization, causing a data race. Data race scenario: Goroutine 1: recordFilerFailure(0) health.lastFailureTime = time.Now() // ❌ unsynchronized write Goroutine 2: shouldSkipUnhealthyFiler(0) time.Since(health.lastFailureTime) // ❌ unsynchronized read → RACE DETECTED by -race detector Fix: Changed lastFailureTime from time.Time to int64 (lastFailureTimeNs) storing Unix nanoseconds for atomic access: Write side (recordFilerFailure): atomic.StoreInt64(&health.lastFailureTimeNs, time.Now().UnixNano()) Read side (shouldSkipUnhealthyFiler): lastFailureNs := atomic.LoadInt64(&health.lastFailureTimeNs) if lastFailureNs == 0 { return false } // Never failed lastFailureTime := time.Unix(0, lastFailureNs) time.Since(lastFailureTime) > 30time.Second Benefits: - Atomic reads/writes (no data race) - Efficient (int64 is 8 bytes, always atomic on 64-bit systems) - Zero value (0) naturally means "never failed" - No mutex needed (lock-free circuit breaker) Note: sync/atomic was already imported for failureCount, so no new import needed. fix: create fresh timeout context for each filer retry attempt The timeout context was created once at function start and reused across all retry attempts, causing subsequent retries to run with progressively shorter (or expired) deadlines. Problem flow: Line 244: timeoutCtx, cancel := context.WithTimeout(ctx, 5s) defer cancel() Retry 1, filer 0: client.LookupVolume(timeoutCtx, ...) ← 5s available ✅ Retry 1, filer 1: client.LookupVolume(timeoutCtx, ...) ← 3s left Retry 1, filer 2: client.LookupVolume(timeoutCtx, ...) ← 0.5s left Retry 2, filer 0: client.LookupVolume(timeoutCtx, ...) ← EXPIRED! ❌ Result: Retries always fail with DeadlineExceeded, defeating the purpose of retries. Fix: Moved context.WithTimeout inside the per-filer loop, creating a fresh timeout context for each attempt: for x := 0; x < n; x++ { timeoutCtx, cancel := context.WithTimeout(ctx, fc.grpcTimeout) err := pb.WithGrpcFilerClient(..., func(client) { resp, err := client.LookupVolume(timeoutCtx, ...) ... }) cancel() // Clean up immediately after call } Benefits: - Each filer attempt gets full fc.grpcTimeout (default 5s) - Retries actually have time to complete - No context leaks (cancel called after each attempt) - More predictable timeout behavior Example with fix: Retry 1, filer 0: fresh 5s timeout ✅ Retry 1, filer 1: fresh 5s timeout ✅ Retry 2, filer 0: fresh 5s timeout ✅ Total max time: 3 retries × 3 filers × 5s = 45s (plus backoff) Note: The outer ctx (from caller) still provides overall cancellation if the caller cancels or times out the entire operation. * fix: always reset vidMap cache on master reconnection The previous refactoring removed the else block that resets vidMap when the first message from a newly connected master is not a VolumeLocation. Problem scenario: 1. Client connects to master-1 and builds vidMap cache 2. Master-1 fails, client connects to master-2 3. First message from master-2 is a ClusterNodeUpdate (not VolumeLocation) 4. Old code: vidMap is reset and updated ✅ 5. New code: vidMap is NOT reset ❌ 6. Result: Client uses stale cache from master-1 → data access errors Example flow with bug: Connect to master-2 First message: ClusterNodeUpdate {filer.x added} → No resetVidMap() call → vidMap still has master-1's stale volume locations → Client reads from wrong volume servers → 404 errors Fix: Restored the else block that resets vidMap when first message is not a VolumeLocation: if resp.VolumeLocation != nil { // ... check leader, reset, and update ... } else { // First message is ClusterNodeUpdate or other type // Must still reset to avoid stale data mc.resetVidMap() } This ensures the cache is always cleared when establishing a new master connection, regardless of what the first message type is. Root cause: During the vidMapClient refactoring, this else block was accidentally dropped, making failover behavior fragile and non-deterministic (depends on which message type arrives first from the new master). Impact: - High severity for master failover scenarios - Could cause read failures, 404s, or wrong data access - Only manifests when first message is not VolumeLocation * fix: goroutine and connection leak in IAM server shutdown The IAM server's KeepConnectedToMaster goroutine used context.Background(), which is non-cancellable, causing the goroutine and its gRPC connections to leak on server shutdown. Problem: go masterClient.KeepConnectedToMaster(context.Background()) - context.Background() never cancels - KeepConnectedToMaster goroutine runs forever - gRPC connection to master stays open - No way to stop cleanly on server shutdown Result: Resource leaks when IAM server is stopped Fix: 1. Added shutdownContext and shutdownCancel to IamApiServer struct 2. Created cancellable context in NewIamApiServerWithStore: shutdownCtx, shutdownCancel := context.WithCancel(context.Background()) 3. Pass shutdownCtx to KeepConnectedToMaster: go masterClient.KeepConnectedToMaster(shutdownCtx) 4. Added Shutdown() method to invoke cancel: func (iama IamApiServer) Shutdown() { if iama.shutdownCancel != nil { iama.shutdownCancel() } } 5. Stored masterClient reference on IamApiServer for future use Benefits: - Goroutine stops cleanly when Shutdown() is called - gRPC connections are closed properly - No resource leaks on server restart/stop - Shutdown() is idempotent (safe to call multiple times) Usage (for future graceful shutdown): iamServer, _ := iamapi.NewIamApiServer(...) defer iamServer.Shutdown() // or in signal handler: sigChan := make(chan os.Signal, 1) signal.Notify(sigChan, syscall.SIGTERM, syscall.SIGINT) go func() { <-sigChan iamServer.Shutdown() os.Exit(0) }() Note: Current command implementations (weed/command/iam.go) don't have shutdown paths yet, but this makes IAM server ready for proper lifecycle management when that infrastructure is added. refactor: remove unnecessary KeepMasterClientConnected wrapper in filer The Filer.KeepMasterClientConnected() method was an unnecessary wrapper that just forwarded to MasterClient.KeepConnectedToMaster(). This wrapper added no value and created inconsistency with other components that call KeepConnectedToMaster directly. Removed: filer.go:178-180 func (fs Filer) KeepMasterClientConnected(ctx context.Context) { fs.MasterClient.KeepConnectedToMaster(ctx) } Updated caller: filer_server.go:181 - go fs.filer.KeepMasterClientConnected(context.Background()) + go fs.filer.MasterClient.KeepConnectedToMaster(context.Background()) Benefits: - Consistent with other components (S3, IAM, Shell, Mount) - Removes unnecessary indirection - Clearer that KeepConnectedToMaster runs in background goroutine - Follows the documented pattern from MasterClient.GetMaster() Note: shell/commands.go was verified and already correctly starts KeepConnectedToMaster in a background goroutine (shell_liner.go:51): go commandEnv.MasterClient.KeepConnectedToMaster(ctx) fix: use client ID instead of timeout for gRPC signature parameter The pb.WithGrpcFilerClient signature parameter is meant to be a client identifier for logging and tracking (added as 'sw-client-id' gRPC metadata in streaming mode), not a timeout value. Problem: timeoutMs := int32(fc.grpcTimeout.Milliseconds()) // 5000 (5 seconds) err := pb.WithGrpcFilerClient(false, timeoutMs, filerAddress, ...) - Passing timeout (5000ms) as signature/client ID - Misuse of API: signature should be a unique client identifier - Timeout is already handled by timeoutCtx passed to gRPC call - Inconsistent with other callers (all use 0 or proper client ID) How WithGrpcFilerClient uses signature parameter: func WithGrpcClient(..., signature int32, ...) { if streamingMode && signature != 0 { md := metadata.New(map[string]string{"sw-client-id": fmt.Sprintf("%d", signature)}) ctx = metadata.NewOutgoingContext(ctx, md) } ... } It's for client identification, not timeout control! Fix: 1. Added clientId int32 field to FilerClient struct 2. Initialize with rand.Int31() in NewFilerClient for unique ID 3. Removed timeoutMs variable (and misleading comment) 4. Use fc.clientId in pb.WithGrpcFilerClient call Before: err := pb.WithGrpcFilerClient(false, timeoutMs, ...) ^^^^^^^^^ Wrong! (5000) After: err := pb.WithGrpcFilerClient(false, fc.clientId, ...) ^^^^^^^^^^^^ Correct! (random int31) Benefits: - Correct API usage (signature = client ID, not timeout) - Timeout still works via timeoutCtx (unchanged) - Consistent with other pb.WithGrpcFilerClient callers - Enables proper client tracking on filer side via gRPC metadata - Each FilerClient instance has unique ID for debugging Examples of correct usage elsewhere: weed/iamapi/iamapi_server.go:145 pb.WithGrpcFilerClient(false, 0, ...) weed/command/s3.go:215 pb.WithGrpcFilerClient(false, 0, ...) weed/shell/commands.go:110 pb.WithGrpcFilerClient(streamingMode, 0, ...) All use 0 (or a proper signature), not a timeout value. * fix: add timeout to master volume lookup to prevent indefinite blocking The masterVolumeProvider.LookupVolumeIds method was using the context directly without a timeout, which could cause it to block indefinitely if the master is slow to respond or unreachable. Problem: err := pb.WithMasterClient(false, p.masterClient.GetMaster(ctx), ...) resp, err := client.LookupVolume(ctx, &master_pb.LookupVolumeRequest{...}) - No timeout on gRPC call to master - Could block indefinitely if master is unresponsive - Inconsistent with FilerClient which uses 5s timeout - This is a fallback path (cache miss) but still needs protection Scenarios where this could hang: 1. Master server under heavy load (slow response) 2. Network issues between client and master 3. Master server hung or deadlocked 4. Master in process of shutting down Fix: timeoutCtx, cancel := context.WithTimeout(ctx, 5time.Second) defer cancel() err := pb.WithMasterClient(false, p.masterClient.GetMaster(timeoutCtx), ...) resp, err := client.LookupVolume(timeoutCtx, &master_pb.LookupVolumeRequest{...}) Benefits: - Prevents indefinite blocking on master lookup - Consistent with FilerClient timeout pattern (5 seconds) - Faster failure detection when master is unresponsive - Caller's context still honored (timeout is in addition, not replacement) - Improves overall system resilience Note: 5 seconds is a reasonable default for volume lookups: - Long enough for normal master response (~10-50ms) - Short enough to fail fast on issues - Matches FilerClient's grpcTimeout default purge * refactor: address code review feedback on comments and style Fixed several code quality issues identified during review: 1. Corrected backoff algorithm description in filer_client.go: - Changed "Exponential backoff" to "Multiplicative backoff with 1.5x factor" - The formula waitTime * 3/2 produces 1s, 1.5s, 2.25s, not exponential 2^n - More accurate terminology prevents confusion 2. Removed redundant nil check in vidmap_client.go: - After the for loop, node is guaranteed to be non-nil - Loop either returns early or assigns non-nil value to node - Simplified: if node != nil { node.cache.Store(nil) } → node.cache.Store(nil) 3. Added startup logging to IAM server for consistency: - Log when master client connection starts - Matches pattern in S3ApiServer (line 100 in s3api_server.go) - Improves operational visibility during startup - Added missing glog import 4. Fixed indentation in filer/reader_at.go: - Lines 76-91 had incorrect indentation (extra tab level) - Line 93 also misaligned - Now properly aligned with surrounding code 5. Updated deprecation comment to follow Go convention: - Changed "DEPRECATED:" to "Deprecated:" (standard Go format) - Tools like staticcheck and IDEs recognize the standard format - Enables automated deprecation warnings in tooling - Better developer experience All changes are cosmetic and do not affect functionality. * fmt * refactor: make circuit breaker parameters configurable in FilerClient The circuit breaker failure threshold (3) and reset timeout (30s) were hardcoded, making it difficult to tune the client's behavior in different deployment environments without modifying the code. Problem: func shouldSkipUnhealthyFiler(index int32) bool { if failureCount < 3 { // Hardcoded threshold return false } if time.Since(lastFailureTime) > 30time.Second { // Hardcoded timeout return false } } Different environments have different needs: - High-traffic production: may want lower threshold (2) for faster failover - Development/testing: may want higher threshold (5) to tolerate flaky networks - Low-latency services: may want shorter reset timeout (10s) - Batch processing: may want longer reset timeout (60s) Solution: 1. Added fields to FilerClientOption: - FailureThreshold int32 (default: 3) - ResetTimeout time.Duration (default: 30s) 2. Added fields to FilerClient: - failureThreshold int32 - resetTimeout time.Duration 3. Applied defaults in NewFilerClient with option override: failureThreshold := int32(3) resetTimeout := 30 time.Second if opt.FailureThreshold > 0 { failureThreshold = opt.FailureThreshold } if opt.ResetTimeout > 0 { resetTimeout = opt.ResetTimeout } 4. Updated shouldSkipUnhealthyFiler to use configurable values: if failureCount < fc.failureThreshold { ... } if time.Since(lastFailureTime) > fc.resetTimeout { ... } Benefits: ✓ Tunable for different deployment environments ✓ Backward compatible (defaults match previous hardcoded values) ✓ No breaking changes to existing code ✓ Better maintainability and flexibility Example usage: // Aggressive failover for low-latency production fc := wdclient.NewFilerClient(filers, dialOpt, dc, &wdclient.FilerClientOption{ FailureThreshold: 2, ResetTimeout: 10 * time.Second, }) // Tolerant of flaky networks in development fc := wdclient.NewFilerClient(filers, dialOpt, dc, &wdclient.FilerClientOption{ FailureThreshold: 5, ResetTimeout: 60 * time.Second, }) * retry parameters * refactor: make retry and timeout parameters configurable Made retry logic and gRPC timeouts configurable across FilerClient and MasterClient to support different deployment environments and network conditions. Problem 1: Hardcoded retry parameters in FilerClient waitTime := time.Second // Fixed at 1s maxRetries := 3 // Fixed at 3 attempts waitTime = waitTime * 3 / 2 // Fixed 1.5x multiplier Different environments have different needs: - Unstable networks: may want more retries (5) with longer waits (2s) - Low-latency production: may want fewer retries (2) with shorter waits (500ms) - Batch processing: may want exponential backoff (2x) instead of 1.5x Problem 2: Hardcoded gRPC timeout in MasterClient timeoutCtx, cancel := context.WithTimeout(ctx, 5time.Second) Master lookups may need different timeouts: - High-latency cross-region: may need 10s timeout - Local network: may use 2s timeout for faster failure detection Solution for FilerClient: 1. Added fields to FilerClientOption: - MaxRetries int (default: 3) - InitialRetryWait time.Duration (default: 1s) - RetryBackoffFactor float64 (default: 1.5) 2. Added fields to FilerClient: - maxRetries int - initialRetryWait time.Duration - retryBackoffFactor float64 3. Updated LookupVolumeIds to use configurable values: waitTime := fc.initialRetryWait maxRetries := fc.maxRetries for retry := 0; retry < maxRetries; retry++ { ... waitTime = time.Duration(float64(waitTime) fc.retryBackoffFactor) } Solution for MasterClient: 1. Added grpcTimeout field to MasterClient (default: 5s) 2. Initialize in NewMasterClient with 5 * time.Second default 3. Updated masterVolumeProvider to use p.masterClient.grpcTimeout Benefits: ✓ Tunable for different network conditions and deployment scenarios ✓ Backward compatible (defaults match previous hardcoded values) ✓ No breaking changes to existing code ✓ Consistent configuration pattern across FilerClient and MasterClient Example usage: // Fast-fail for low-latency production with stable network fc := wdclient.NewFilerClient(filers, dialOpt, dc, &wdclient.FilerClientOption{ MaxRetries: 2, InitialRetryWait: 500 * time.Millisecond, RetryBackoffFactor: 2.0, // Exponential backoff GrpcTimeout: 2 * time.Second, }) // Patient retries for unstable network or batch processing fc := wdclient.NewFilerClient(filers, dialOpt, dc, &wdclient.FilerClientOption{ MaxRetries: 5, InitialRetryWait: 2 * time.Second, RetryBackoffFactor: 1.5, GrpcTimeout: 10 * time.Second, }) Note: MasterClient timeout is currently set at construction time and not user-configurable via NewMasterClient parameters. Future enhancement could add a MasterClientOption struct similar to FilerClientOption. * fix: rename vicCacheLock to vidCacheLock for consistency Fixed typo in variable name for better code consistency and readability. Problem: vidCache := make(map[string]filer_pb.Locations) var vicCacheLock sync.RWMutex // Typo: vic instead of vid vicCacheLock.RLock() locations, found := vidCache[vid] vicCacheLock.RUnlock() The variable name 'vicCacheLock' is inconsistent with 'vidCache'. Both should use 'vid' prefix (volume ID) not 'vic'. Fix: Renamed all 5 occurrences: - var vicCacheLock → var vidCacheLock (line 56) - vicCacheLock.RLock() → vidCacheLock.RLock() (line 62) - vicCacheLock.RUnlock() → vidCacheLock.RUnlock() (line 64) - vicCacheLock.Lock() → vidCacheLock.Lock() (line 81) - vicCacheLock.Unlock() → vidCacheLock.Unlock() (line 91) Benefits: ✓ Consistent variable naming convention ✓ Clearer intent (volume ID cache lock) ✓ Better code readability ✓ Easier code navigation fix: use defer cancel() with anonymous function for proper context cleanup Fixed context cancellation to use defer pattern correctly in loop iteration. Problem: for x := 0; x < n; x++ { timeoutCtx, cancel := context.WithTimeout(ctx, fc.grpcTimeout) err := pb.WithGrpcFilerClient(...) cancel() // Only called on normal return, not on panic } Issues with original approach: 1. If pb.WithGrpcFilerClient panics, cancel() is never called → context leak 2. If callback returns early (though unlikely here), cleanup might be missed 3. Not following Go best practices for context.WithTimeout usage Problem with naive defer in loop: for x := 0; x < n; x++ { timeoutCtx, cancel := context.WithTimeout(ctx, fc.grpcTimeout) defer cancel() // ❌ WRONG: All defers accumulate until function returns } In Go, defer executes when the surrounding function returns, not when the loop iteration ends. This would accumulate n deferred cancel() calls and leak contexts until LookupVolumeIds returns. Solution: Wrap in anonymous function for x := 0; x < n; x++ { err := func() error { timeoutCtx, cancel := context.WithTimeout(ctx, fc.grpcTimeout) defer cancel() // ✅ Executes when anonymous function returns (per iteration) return pb.WithGrpcFilerClient(...) }() } Benefits: ✓ Context always cancelled, even on panic ✓ defer executes after each iteration (not accumulated) ✓ Follows Go best practices for context.WithTimeout ✓ No resource leaks during retry loop execution ✓ Cleaner error handling Reference: Go documentation for context.WithTimeout explicitly shows: ctx, cancel := context.WithTimeout(...) defer cancel() This is the idiomatic pattern that should always be followed. * Can't use defer directly in loop * improve: add data center preference and URL shuffling for consistent performance Added missing data center preference and load distribution (URL shuffling) to ensure consistent performance and behavior across all code paths. Problem 1: PreferPublicUrl path missing DC preference and shuffling Location: weed/wdclient/filer_client.go lines 184-192 The custom PreferPublicUrl implementation was simply iterating through locations and building URLs without considering: 1. Data center proximity (latency optimization) 2. Load distribution across volume servers Before: for _, loc := range locations { url := loc.PublicUrl if url == "" { url = loc.Url } fullUrls = append(fullUrls, "http://"+url+"/"+fileId) } return fullUrls, nil After: var sameDcUrls, otherDcUrls []string dataCenter := fc.GetDataCenter() for _, loc := range locations { url := loc.PublicUrl if url == "" { url = loc.Url } httpUrl := "http://" + url + "/" + fileId if dataCenter != "" && dataCenter == loc.DataCenter { sameDcUrls = append(sameDcUrls, httpUrl) } else { otherDcUrls = append(otherDcUrls, httpUrl) } } rand.Shuffle(len(sameDcUrls), ...) rand.Shuffle(len(otherDcUrls), ...) fullUrls = append(sameDcUrls, otherDcUrls...) Problem 2: Cache miss path missing URL shuffling Location: weed/wdclient/vidmap_client.go lines 95-108 The cache miss path (fallback lookup) was missing URL shuffling, while the cache hit path (vm.LookupFileId) already shuffles URLs. This inconsistency meant: - Cache hit: URLs shuffled → load distributed - Cache miss: URLs not shuffled → first server always hit Before: var sameDcUrls, otherDcUrls []string // ... build URLs ... fullUrls = append(sameDcUrls, otherDcUrls...) return fullUrls, nil After: var sameDcUrls, otherDcUrls []string // ... build URLs ... rand.Shuffle(len(sameDcUrls), ...) rand.Shuffle(len(otherDcUrls), ...) fullUrls = append(sameDcUrls, otherDcUrls...) return fullUrls, nil Benefits: ✓ Reduced latency by preferring same-DC volume servers ✓ Even load distribution across all volume servers ✓ Consistent behavior between cache hit/miss paths ✓ Consistent behavior between PreferUrl and PreferPublicUrl ✓ Matches behavior of existing vidMap.LookupFileId implementation Impact on performance: - Lower read latency (same-DC preference) - Better volume server utilization (load spreading) - No single volume server becomes a hotspot Note: Added math/rand import to vidmap_client.go for shuffle support. * Update weed/wdclient/masterclient.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * improve: call IAM server Shutdown() for best-effort cleanup Added call to iamApiServer.Shutdown() to ensure cleanup happens when possible, and documented the limitations of the current approach. Problem: The Shutdown() method was defined in IamApiServer but never called anywhere, meaning the KeepConnectedToMaster goroutine would continue running even when the IAM server stopped, causing resource leaks. Changes: 1. Store iamApiServer instance in weed/command/iam.go - Changed: _, iamApiServer_err := iamapi.NewIamApiServer(...) - To: iamApiServer, iamApiServer_err := iamapi.NewIamApiServer(...) 2. Added defer call for best-effort cleanup - defer iamApiServer.Shutdown() - This will execute if startIamServer() returns normally 3. Added logging in Shutdown() method - Log when shutdown is triggered for visibility 4. Documented limitations and future improvements - Added note that defer only works for normal function returns - SeaweedFS commands don't currently have signal handling - Suggested future enhancement: add SIGTERM/SIGINT handling Current behavior: - ✓ Cleanup happens if HTTP server fails to start (glog.Fatalf path) - ✓ Cleanup happens if Serve() returns with error (unlikely) - ✗ Cleanup does NOT happen on SIGTERM/SIGINT (process killed) The last case is a limitation of the current command architecture - all SeaweedFS commands (s3, filer, volume, master, iam) lack signal handling for graceful shutdown. This is a systemic issue that affects all services. Future enhancement: To properly handle SIGTERM/SIGINT, the command layer would need: sigChan := make(chan os.Signal, 1) signal.Notify(sigChan, syscall.SIGTERM, syscall.SIGINT) go func() { httpServer.Serve(listener) // Non-blocking }() <-sigChan glog.V(0).Infof("Received shutdown signal") iamApiServer.Shutdown() httpServer.Shutdown(context.Background()) This would require refactoring the command structure for all services, which is out of scope for this change. Benefits of current approach: ✓ Best-effort cleanup (better than nothing) ✓ Proper cleanup in error paths ✓ Documented for future improvement ✓ Consistent with how other SeaweedFS services handle lifecycle * data racing in test --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2 weeks ago

11 Commits (a1cb1dc90fb3908ad5e17deb5a85424a6de22a67)