seaweedfs

Commit Graph

Author	SHA1	Message	Date
Chris Lu	cf3693651c	fix: add IdxFileSize check to pre-delete volume verification The verification step checked DatFileSize and FileCount but not IdxFileSize, leaving a gap in the copy validation before source deletion.	1 week ago
Chris Lu	5f85bf5e8a	Batch volume balance: run multiple moves per job (#8561 ) * proto: add BalanceMoveSpec and batch fields to BalanceTaskParams Add BalanceMoveSpec message for encoding individual volume moves, and max_concurrent_moves + repeated moves fields to BalanceTaskParams to support batching multiple volume moves in a single job. * balance handler: add batch execution with concurrent volume moves Refactor Execute() into executeSingleMove() (backward compatible) and executeBatchMoves() which runs multiple volume moves concurrently using a semaphore-bounded goroutine pool. When BalanceTaskParams.Moves is populated, the batch path is taken; otherwise the single-move path. Includes aggregate progress reporting across concurrent moves, per-move error collection, and partial failure support. * balance handler: add batch config fields to Descriptor and worker config Add max_concurrent_moves and batch_size fields to the worker config form and deriveBalanceWorkerConfig(). These control how many volume moves run concurrently within a batch job and the maximum batch size. * balance handler: group detection proposals into batch jobs When batch_size > 1, the Detect method groups detection results into batch proposals where each proposal encodes multiple BalanceMoveSpec entries in BalanceTaskParams.Moves. Single-result batches fall back to the existing single-move proposal format for backward compatibility. * admin UI: add volume balance execution plan and batch badge Add renderBalanceExecutionPlan() for rich rendering of volume balance jobs in the job detail modal. Single-move jobs show source/target/volume info; batch jobs show a moves table with all volume moves. Add batch badge (e.g., "5 moves") next to job type in the execution jobs table when the job has batch=true label. * Update plugin_templ.go * fix: detection algorithm uses greedy target instead of divergent topology scores The detection loop tracked effective volume counts via an adjustments map, but createBalanceTask independently called planBalanceDestination which used the topology's LoadCount — a separate, unadjusted source of truth. This divergence caused multiple moves to pile onto the same server. Changes: - Add resolveBalanceDestination to resolve the detection loop's greedy target (minServer) rather than independently picking a destination - Add oscillation guard: stop when max-min <= 1 since no single move can improve the balance beyond that point - Track unseeded destinations: if a target server wasn't in the initial serverVolumeCounts, add it so subsequent iterations include it - Add TestDetection_UnseededDestinationDoesNotOverload * fix: handler force_move propagation, partial failure, deterministic dedupe - Propagate ForceMove from outer BalanceTaskParams to individual move TaskParams so batch moves respect the force_move flag - Fix partial failure: mark job successful if at least one move succeeded (succeeded > 0 \|\| failed == 0) to avoid re-running already-completed moves on retry - Use SHA-256 hash for deterministic dedupe key fallback instead of time.Now().UnixNano() which is non-deterministic - Remove unused successDetails variable - Extract maxProposalStringLength constant to replace magic number 200 * admin UI: use template literals in balance execution plan rendering * fix: integration test handles batch proposals from batched detection With batch_size=20, all moves are grouped into a single proposal containing BalanceParams.Moves instead of top-level Sources/Targets. Update assertions to handle both batch and single-move proposal formats. * fix: verify volume size on target before deleting source during balance Add a pre-delete safety check that reads the volume file status on both source and target, then compares .dat file size and file count. If they don't match, the move is aborted — leaving the source intact rather than risking irreversible data loss. Also removes the redundant mountVolume call since VolumeCopy already mounts the volume on the target server. * fix: clamp maxConcurrent, serialize progress sends, validate config as int64 - Clamp maxConcurrentMoves to defaultMaxConcurrentMoves before creating the semaphore so a stale or malicious job cannot request unbounded concurrent volume moves - Extend progressMu to cover sender.SendProgress calls since the underlying gRPC stream is not safe for concurrent writes - Perform bounds checks on max_concurrent_moves and batch_size in int64 space before casting to int, avoiding potential overflow on 32-bit * fix: check disk capacity in resolveBalanceDestination Skip disks where VolumeCount >= MaxVolumeCount so the detection loop does not propose moves to a full disk that would fail at execution time. * test: rename unseeded destination test to match actual behavior The test exercises a server with 0 volumes that IS seeded from topology (matching disk type), not an unseeded destination. Rename to TestDetection_ZeroVolumeServerIncludedInBalance and fix comments. * test: tighten integration test to assert exactly one batch proposal With default batch_size=20, all moves should be grouped into a single batch proposal. Assert len(proposals)==1 and require BalanceParams with Moves, removing the legacy single-move else branch. * fix: propagate ctx to RPCs and restore source writability on abort - All helper methods (markVolumeReadonly, copyVolume, tailVolume, readVolumeFileStatus, deleteVolume) now accept a context parameter instead of using context.Background(), so Execute's ctx propagates cancellation and timeouts into every volume server RPC - Add deferred cleanup that restores the source volume to writable if any step after markVolumeReadonly fails, preventing the source from being left permanently readonly on abort - Add markVolumeWritable helper using VolumeMarkWritableRequest * fix: deep-copy protobuf messages in test recording sender Use proto.Clone in recordingExecutionSender to store immutable snapshots of JobProgressUpdate and JobCompleted, preventing assertions from observing mutations if the handler reuses message pointers. * fix: add VolumeMarkWritable and ReadVolumeFileStatus to fake volume server The balance task now calls ReadVolumeFileStatus for pre-delete verification and VolumeMarkWritable to restore writability on abort. Add both RPCs to the test fake, and drop the mountCalls assertion since BalanceTask no longer calls VolumeMount directly (VolumeCopy handles it). * fix: use maxConcurrentMovesLimit (50) for clamp, not defaultMaxConcurrentMoves defaultMaxConcurrentMoves (5) is the fallback when the field is unset, not an upper bound. Clamping to it silently overrides valid config values like 10/20/50. Introduce maxConcurrentMovesLimit (50) matching the descriptor's MaxValue and clamp to that instead. * fix: cancel batch moves on progress stream failure Derive a cancellable batchCtx from the caller's ctx. If sender.SendProgress returns an error (client disconnect, context cancelled), capture it, skip further sends, and cancel batchCtx so in-flight moves abort via their propagated context rather than running blind to completion. * fix: bound cleanup timeout and validate batch move fields - Use a 30-second timeout for the deferred markVolumeWritable cleanup instead of context.Background() which can block indefinitely if the volume server is unreachable - Validate required fields (VolumeID, SourceNode, TargetNode) before appending moves to a batch proposal, skipping invalid entries - Fall back to a single-move proposal when filtering leaves only one valid move in a batch * fix: cancel task execution on SendProgress stream failure All handler progress callbacks previously ignored SendProgress errors, allowing tasks to continue executing after the client disconnected. Now each handler creates a derived cancellable context and cancels it on the first SendProgress error, stopping the in-flight task promptly. Handlers fixed: erasure_coding, vacuum, volume_balance (single-move), and admin_script (breaks command loop on send failure). * fix: validate batch moves before scheduling in executeBatchMoves Reject empty batches, enforce a hard upper bound (100 moves), and filter out nil or incomplete move specs (missing source/target/volume) before allocating progress tracking and launching goroutines. * test: add batch balance execution integration test Tests the batch move path with 3 volumes, max concurrency 2, using fake volume servers. Verifies all moves complete with correct readonly, copy, tail, and delete RPC counts. * test: add MarkWritableCount and ReadFileStatusCount accessors Expose the markWritableCalls and readFileStatusCalls counters on the fake volume server, following the existing MarkReadonlyCount pattern. * fix: oscillation guard uses global effective counts for heterogeneous capacity The oscillation guard (max-min <= 1) previously used maxServer/minServer which are determined by utilization ratio. With heterogeneous capacity, maxServer by utilization can have fewer raw volumes than minServer, producing a negative diff and incorrectly triggering the guard. Now scans all servers' effective counts to find the true global max/min volume counts, so the guard works correctly regardless of whether utilization-based or raw-count balancing is used. * fix: admin script handler breaks outer loop on SendProgress failure The break on SendProgress error inside the shell.Commands scan only exited the inner loop, letting the outer command loop continue executing commands on a broken stream. Use a sendBroken flag to propagate the break to the outer execCommands loop.	1 week ago
Chris Lu	470075dd90	admin/balance: fix Max Volumes display and balancer source selection (#8583 ) * admin: fix Max Volumes column always showing 0 GetClusterVolumeServers() computed DiskCapacity from diskInfo.MaxVolumeCount but never populated the MaxVolumes field on the VolumeServer struct, causing the column to always display 0. * balance: use utilization ratio for source server selection The balancer selected the source server (to move volumes FROM) by raw volume count. In clusters with heterogeneous MaxVolumeCount settings, the server with the highest capacity naturally holds the most volumes and was always picked as the source, even when it had the lowest utilization ratio. Change source selection and imbalance calculation to use utilization ratio (effectiveCount / maxVolumeCount) so servers are compared by how full they are relative to their capacity, not by absolute volume count. This matches how destination scoring already works via calculateBalanceScore().	1 week ago
Chris Lu	78a3441b30	fix: volume balance detection returns multiple tasks per run (#8559 ) * fix: volume balance detection now returns multiple tasks per run (#8551) Previously, detectForDiskType() returned at most 1 balance task per disk type, making the MaxJobsPerDetection setting ineffective. The detection loop now iterates within each disk type, planning multiple moves until the imbalance drops below threshold or maxResults is reached. Effective volume counts are adjusted after each planned move so the algorithm correctly re-evaluates which server is overloaded. * fix: factor pending tasks into destination scoring and use UnixNano for task IDs - Use UnixNano instead of Unix for task IDs to avoid collisions when multiple tasks are created within the same second - Adjust calculateBalanceScore to include LoadCount (pending + assigned tasks) in the utilization estimate, so the destination picker avoids stacking multiple planned moves onto the same target disk * test: add comprehensive balance detection tests for complex scenarios Cover multi-server convergence, max-server shifting, destination spreading, pre-existing pending task skipping, no-duplicate-volume invariant, and parameterized convergence verification across different cluster shapes and thresholds. * fix: address PR review findings in balance detection - hasMore flag: compute from len(results) >= maxResults so the scheduler knows more pages may exist, matching vacuum/EC handler pattern - Exhausted server fallthrough: when no eligible volumes remain on the current maxServer (all have pending tasks) or destination planning fails, mark the server as exhausted and continue to the next overloaded server instead of stopping the entire detection loop - Return canonical destination server ID directly from createBalanceTask instead of resolving via findServerIDByAddress, eliminating the fragile address→ID lookup for adjustment tracking - Fix bestScore sentinel: use math.Inf(-1) instead of -1.0 so disks with negative scores (high pending load, same rack/DC) are still selected as the best available destination - Add TestDetection_ExhaustedServerFallsThrough covering the scenario where the top server's volumes are all blocked by pre-existing tasks * test: fix computeEffectiveCounts and add len guard in no-duplicate test - computeEffectiveCounts now takes a servers slice to seed counts for all known servers (including empty ones) and uses an address→ID map from the topology spec instead of scanning metrics, so destination servers with zero initial volumes are tracked correctly - TestDetection_NoDuplicateVolumesAcrossIterations now asserts len > 1 before checking duplicates, so the test actually fails if Detection regresses to returning a single task * fix: remove redundant HasAnyTask check in createBalanceTask The HasAnyTask check in createBalanceTask duplicated the same check already performed in detectForDiskType's volume selection loop. Since detection runs single-threaded (MaxDetectionConcurrency: 1), no race can occur between the two points. * fix: consistent hasMore pattern and remove double-counted LoadCount in scoring - Adopt vacuum_handler's hasMore pattern: over-fetch by 1, check len > maxResults, and truncate — consistent truncation semantics - Remove direct LoadCount penalty in calculateBalanceScore since LoadCount is already factored into effectiveVolumeCount for utilization scoring; bump utilization weight from 40 to 50 to compensate for the removed 10-point load penalty * fix: handle zero maxResults as no-cap, emit trace after trim, seed empty servers - When MaxResults is 0 (omitted), treat as no explicit cap instead of defaulting to 1; only apply the +1 over-fetch probe when caller supplies a positive limit - Move decision trace emission after hasMore/trim so the trace accurately reflects the returned proposals - Seed serverVolumeCounts from ActiveTopology so servers that have a matching disk type but zero volumes are included in the imbalance calculation and MinServerCount check * fix: nil-guard clusterInfo, uncap legacy DetectionFunc, deterministic disk type order - Add early nil guard for clusterInfo in Detection to prevent panics in downstream helpers (detectForDiskType, createBalanceTask) - Change register.go DetectionFunc wrapper from maxResults=1 to 0 (no cap) so the legacy code path returns all detected tasks - Sort disk type keys before iteration so results are deterministic when maxResults spans multiple disk types (HDD/SSD) * fix: don't over-fetch in stateful detection to avoid orphaned pending tasks Detection registers planned moves in ActiveTopology via AddPendingTask, so requesting maxResults+1 would create an extra pending task that gets discarded during trim. Use len(results) >= maxResults as the hasMore signal instead, which is correct since Detection already caps internally. * fix: return explicit truncated flag from Detection instead of approximating Detection now returns (results, truncated, error) where truncated is true only when the loop stopped because it hit maxResults, not when it ran out of work naturally. This eliminates false hasMore signals when detection happens to produce exactly maxResults results by resolving the imbalance. * cleanup: simplify detection logic and remove redundancies - Remove redundant clusterInfo nil check in detectForDiskType since Detection already guards against nil clusterInfo - Remove adjustments loop for destination servers not in serverVolumeCounts — topology seeding ensures all servers with matching disk type are already present - Merge two-loop min/max calculation into a single loop: min across all servers, max only among non-exhausted servers - Replace magic number 100 with len(metrics) for minC initialization in convergence test * fix: accurate truncation flag, deterministic server order, indexed volume lookup - Track balanced flag to distinguish "hit maxResults cap" from "cluster balanced at exactly maxResults" — truncated is only true when there's genuinely more work to do - Sort servers for deterministic iteration and tie-breaking when multiple servers have equal volume counts - Pre-index volumes by server with per-server cursors to avoid O(maxResults * volumes) rescanning on each iteration - Add truncation flag assertions to RespectsMaxResults test: true when capped, false when detection finishes naturally * fix: seed trace server counts from ActiveTopology to match detection logic The decision trace was building serverVolumeCounts only from metrics, missing zero-volume servers seeded from ActiveTopology by Detection. This could cause the trace to report wrong server counts, incorrect imbalance ratios, or spurious "too few servers" messages. Pass activeTopology into the trace function and seed server counts the same way Detection does. * fix: don't exhaust server on per-volume planning failure, sort volumes by ID - When createBalanceTask returns nil, continue to the next volume on the same server instead of marking the entire server as exhausted. The failure may be volume-specific (not found in topology, pending task registration failed) and other volumes on the server may still be viable candidates. - Sort each server's volume slice by VolumeID after pre-indexing so volume selection is fully deterministic regardless of input order. * fix: use require instead of assert to prevent nil dereference panic in CORS test The test used assert.NoError (non-fatal) for GetBucketCors, then immediately accessed getResp.CORSRules. When the API returns an error, getResp is nil causing a panic. Switch to require.NoError/NotNil/Len so the test stops before dereferencing a nil response. * fix: deterministic disk tie-breaking and stronger pre-existing task test - Sort available disks by NodeID then DiskID before scoring so destination selection is deterministic when two disks score equally - Add task count bounds assertion to SkipsPreExistingPendingTasks test: with 15 of 20 volumes already having pending tasks, at most 5 new tasks should be created and at least 1 (imbalance still exists) * fix: seed adjustments from existing pending/assigned tasks to prevent over-scheduling Detection now calls ActiveTopology.GetTaskServerAdjustments() to initialize the adjustments map with source/destination deltas from existing pending and assigned balance tasks. This ensures effectiveCounts reflects in-flight moves, preventing the algorithm from planning additional moves in the same direction when prior moves already address the imbalance. Added GetTaskServerAdjustments(taskType) to ActiveTopology which iterates pending and assigned tasks, decrementing source servers and incrementing destination servers for the given task type.	2 weeks ago
Аlexey Medvedev	6a3a97333f	Add support for TLS in gRPC communication between worker and volume server (#8370 ) * Add support for TLS in gRPC communication between worker and volume server * address comments * worker: capture shared grpc.DialOption in BalanceTask registration closure * worker: capture shared grpc.DialOption in ErasureCodingTask registration closure * worker: capture shared grpc.DialOption in VacuumTask registration closure * worker: use grpc.worker security configuration section for tasks * plugin/worker: fix compilation errors by passing grpc.DialOption to task constructors * plugin/worker: prevent double-counting in EC skip counters --------- Co-authored-by: Chris Lu <chris.lu@gmail.com>	4 weeks ago
Chris Lu	d3f79d4c38	Update detection.go	2 months ago
Chris Lu	b203ed4124	Fix imbalance detection disk type grouping and volume grow errors (#8097 ) * Fix imbalance detection disk type grouping and volume grow errors This PR addresses two issues: 1. Imbalance Detection: Previously, balance detection did not verify disk types, leading to false positives when comparing heterogenous nodes (e.g. SSD vs HDD). Logic is now updated to group volumes by DiskType before calculating imbalance. 2. Volume Grow Errors: Fixed a variable scope issue in master_grpc_server_volume.go and added a pre-check for available space to prevent 'only 0 volumes left' error logs when a disk type is full or abandoned. Included units tests for the detection logic. * Refactor balance detection loop into detectForDiskType * Fix potential panic in volume grow logic by checking replica placement parse error	2 months ago
Chris Lu	13dcf445a4	Fix maintenance worker panic and add EC integration tests (#8068 ) * Fix nil pointer panic in maintenance worker when receiving empty task assignment When a worker requests a task and none are available, the admin server sends an empty TaskAssignment message. The worker was attempting to log the task details without checking if the TaskId was empty, causing a nil pointer dereference when accessing taskAssign.Params.VolumeId. This fix adds a check for empty TaskId before processing the assignment, preventing worker crashes and improving stability in production environments. * Add EC integration test for admin-worker maintenance system Adds comprehensive integration test that verifies the end-to-end flow of erasure coding maintenance tasks: - Admin server detects volumes needing EC encoding - Workers register and receive task assignments - EC encoding is executed and verified in master topology - File read-back validation confirms data integrity The test uses unique absolute working directories for each worker to prevent ID conflicts and ensure stable worker registration. Includes proper cleanup and process management for reliable test execution. * Improve maintenance system stability and task deduplication - Add cross-type task deduplication to prevent concurrent maintenance operations on the same volume (EC, balance, vacuum) - Implement HasAnyTask check in ActiveTopology for better coordination - Increase RequestTask timeout from 5s to 30s to prevent unnecessary worker reconnections - Add TaskTypeNone sentinel for generic task checks - Update all task detectors to use HasAnyTask for conflict prevention - Improve config persistence and schema handling * Add GitHub Actions workflow for EC integration tests Adds CI workflow that runs EC integration tests on push and pull requests to master branch. The workflow: - Triggers on changes to admin, worker, or test files - Builds the weed binary - Runs the EC integration test suite - Uploads test logs as artifacts on failure for debugging This ensures the maintenance system remains stable and worker-admin integration is validated in CI. * go version 1.24 * address comments * Update maintenance_integration.go * support seconds * ec prioritize over balancing in tests	2 months ago
Chris Lu	c260e6a22e	Fix issue #7880 : Tasks use Volume IDs instead of ip:port (#7881 ) * Fix issue #7880: Tasks use Volume IDs instead of ip:port When volume servers are registered with custom IDs, tasks were attempting to connect using the ID instead of the actual ip:port address, causing connection failures. Modified task detection logic in balance, erasure coding, and vacuum tasks to resolve volume server IDs to their actual ip:port addresses using ActiveTopology information. * Use server addresses directly instead of translating from IDs Modified VolumeHealthMetrics to include ServerAddress field populated directly from topology DataNodeInfo.Address. Updated task detection logic to use addresses directly without runtime lookups. Changes: - Added ServerAddress field to VolumeHealthMetrics - Updated maintenance scanner to populate ServerAddress - Modified task detection to use ServerAddress for Node fields - Updated DestinationPlan to include TargetAddress - Removed runtime address lookups in favor of direct address usage * Address PR comments: add ServerAddress field, improve error handling - Add missing ServerAddress field to VolumeHealthMetrics struct - Add warning in vacuum detection when server not found in topology - Improve error handling in erasure coding to abort task if sources missing - Make vacuum task stricter by skipping if server not found in topology * Refactor: Extract common address resolution logic into shared utility - Created weed/worker/tasks/util/address.go with ResolveServerAddress function - Updated balance, erasure_coding, and vacuum detection to use the shared utility - Removed code duplication and improved maintainability - Consistent error handling across all task types * Fix critical issues in task address resolution - Vacuum: Require topology availability and fail if server not found (no fallback to ID) - Ensure all task types consistently fail early when topology is incomplete - Prevent creation of tasks that would fail due to missing server addresses * Address additional PR feedback - Add validation for empty addresses in ResolveServerAddress - Remove redundant serverAddress variable in vacuum detection - Improve robustness of address resolution * Improve error logging in vacuum detection - Include actual error details in log message for better diagnostics - Make error messages consistent with other task types	3 months ago
Mariano Ntrougkas	f06ddd05cc	Improve-worker (#7367 ) * ♻️ refactor(worker): remove goto * ♻️ refactor(worker): let manager loop exit by itself * ♻️ refactor(worker): fix race condition when closing worker CloseSend is not safe to call when another goroutine concurrently calls Send. streamCancel already handles proper stream closure. Also, streamExit signal should be called AFTER sending shutdownMsg Now the worker has no race condition if stopped during any moment (hopefully, tested with -race flag) * 🐛 fix(task_logger): deadlock in log closure * 🐛 fix(balance): fix balance task Removes the outdated "UnloadVolume" step as it is handled by "DeleteVolume". #7346	5 months ago
Chris Lu	25bbf4c3d4	Admin UI: Fetch task logs (#7114 ) * show task details * loading tasks * task UI works * generic rendering * rendering the export link * removing placementConflicts from task parameters * remove TaskSourceLocation * remove "Server ID" column * rendering balance task source * sources and targets * fix ec task generation * move info * render timeline * simplified worker id * simplify * read task logs from worker * isValidTaskID * address comments * Update weed/worker/tasks/balance/execution.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update weed/worker/tasks/erasure_coding/ec_task.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update weed/worker/tasks/task_log_handler.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix shard ids * plan distributing shard id * rendering planned shards in task details * remove Conflicts * worker logs correctly * pass in dc and rack * task logging * Update weed/admin/maintenance/maintenance_queue.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * display log details * logs have fields now * sort field keys * fix link * fix collection filtering * avoid hard coded ec shard counts --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	7 months ago
Chris Lu	0ecb466eda	Admin: refactoring active topology (#7073 ) * refactoring * add ec shard size * address comments * passing task id There seems to be a disconnect between the pending tasks created in ActiveTopology and the TaskDetectionResult returned by this function. A taskID is generated locally and used to create pending tasks via AddPendingECShardTask, but this taskID is not stored in the TaskDetectionResult or passed along in any way. This makes it impossible for the worker that eventually executes the task to know which pending task in ActiveTopology it corresponds to. Without the correct taskID, the worker cannot call AssignTask or CompleteTask on the master, breaking the entire task lifecycle and capacity management feature. A potential solution is to add a TaskID field to TaskDetectionResult and worker_pb.TaskParams, ensuring the ID is propagated from detection to execution. * 1 source multiple destinations * task supports multi source and destination * ec needs to clean up previous shards * use erasure coding constants * getPlanningCapacityUnsafe getEffectiveAvailableCapacityUnsafe should return StorageSlotChange for calculation * use CanAccommodate to calculate * remove dead code * address comments * fix Mutex Copying in Protobuf Structs * use constants * fix estimatedSize The calculation for estimatedSize only considers source.EstimatedSize and dest.StorageChange, but omits dest.EstimatedSize. The TaskDestination struct has an EstimatedSize field, which seems to be ignored here. This could lead to an incorrect estimation of the total size of data involved in tasks on a disk. The loop should probably also include estimatedSize += dest.EstimatedSize. * at.assignTaskToDisk(task) * refactoring * Update weed/admin/topology/internal.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * fail fast * fix compilation * Update weed/worker/tasks/erasure_coding/detection.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * indexes for volume and shard locations * dedup with ToVolumeSlots * return an additional boolean to indicate success, or an error * Update abstract_sql_store.go * fix * Update weed/worker/tasks/erasure_coding/detection.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update weed/admin/topology/task_management.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * faster findVolumeDisk * Update weed/worker/tasks/erasure_coding/detection.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update weed/admin/topology/storage_slot_test.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * refactor * simplify * remove unused GetDiskStorageImpact function * refactor * add comments * Update weed/admin/topology/storage_impact.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update weed/admin/topology/storage_slot_test.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update storage_impact.go * AddPendingTask The unified AddPendingTask function now serves as the single entry point for all task creation, successfully consolidating the previously separate functions while maintaining full functionality and improving code organization. --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	8 months ago
Chris Lu	0975968e71	admin: Refactor task destination planning (#7063 ) * refactor planning into task detection * refactoring worker tasks * refactor * compiles, but only balance task is registered * compiles, but has nil exception * avoid nil logger * add back ec task * setting ec log directory * implement balance and vacuum tasks * EC tasks will no longer fail with "file not found" errors * Use ReceiveFile API to send locally generated shards * distributing shard files and ecx,ecj,vif files * generate .ecx files correctly * do not mount all possible EC shards (0-13) on every destination * use constants * delete all replicas * rename files * pass in volume size to tasks	8 months ago
Chris Lu	891a2fb6eb	Admin: misc improvements on admin server and workers. EC now works. (#7055 ) * initial design * added simulation as tests * reorganized the codebase to move the simulation framework and tests into their own dedicated package * integration test. ec worker task * remove "enhanced" reference * start master, volume servers, filer Current Status ✅ Master: Healthy and running (port 9333) ✅ Filer: Healthy and running (port 8888) ✅ Volume Servers: All 6 servers running (ports 8080-8085) 🔄 Admin/Workers: Will start when dependencies are ready * generate write load * tasks are assigned * admin start wtih grpc port. worker has its own working directory * Update .gitignore * working worker and admin. Task detection is not working yet. * compiles, detection uses volumeSizeLimitMB from master * compiles * worker retries connecting to admin * build and restart * rendering pending tasks * skip task ID column * sticky worker id * test canScheduleTaskNow * worker reconnect to admin * clean up logs * worker register itself first * worker can run ec work and report status but: 1. one volume should not be repeatedly worked on. 2. ec shards needs to be distributed and source data should be deleted. * move ec task logic * listing ec shards * local copy, ec. Need to distribute. * ec is mostly working now * distribution of ec shards needs improvement * need configuration to enable ec * show ec volumes * interval field UI component * rename * integration test with vauuming * garbage percentage threshold * fix warning * display ec shard sizes * fix ec volumes list * Update ui.go * show default values * ensure correct default value * MaintenanceConfig use ConfigField * use schema defined defaults * config * reduce duplication * refactor to use BaseUIProvider * each task register its schema * checkECEncodingCandidate use ecDetector * use vacuumDetector * use volumeSizeLimitMB * remove remove * remove unused * refactor * use new framework * remove v2 reference * refactor * left menu can scroll now * The maintenance manager was not being initialized when no data directory was configured for persistent storage. * saving config * Update task_config_schema_templ.go * enable/disable tasks * protobuf encoded task configurations * fix system settings * use ui component * remove logs * interface{} Reduction * reduce interface{} * reduce interface{} * avoid from/to map * reduce interface{} * refactor * keep it DRY * added logging * debug messages * debug level * debug * show the log caller line * use configured task policy * log level * handle admin heartbeat response * Update worker.go * fix EC rack and dc count * Report task status to admin server * fix task logging, simplify interface checking, use erasure_coding constants * factor in empty volume server during task planning * volume.list adds disk id * track disk id also * fix locking scheduled and manual scanning * add active topology * simplify task detector * ec task completed, but shards are not showing up * implement ec in ec_typed.go * adjust log level * dedup * implementing ec copying shards and only ecx files * use disk id when distributing ec shards 🎯 Planning: ActiveTopology creates DestinationPlan with specific TargetDisk 📦 Task Creation: maintenance_integration.go creates ECDestination with DiskId 🚀 Task Execution: EC task passes DiskId in VolumeEcShardsCopyRequest 💾 Volume Server: Receives disk_id and stores shards on specific disk (vs.store.Locations[req.DiskId]) 📂 File System: EC shards and metadata land in the exact disk directory planned * Delete original volume from all locations * clean up existing shard locations * local encoding and distributing * Update docker/admin_integration/EC-TESTING-README.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * check volume id range * simplify * fix tests * fix types * clean up logs and tests --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	8 months ago
Chris Lu	69553e5ba6	convert error fromating to %w everywhere (#6995 )	8 months ago
Chris Lu	687a6a6c1d	Admin UI: Add policies (#6968 ) * add policies to UI, accessing filer directly * view, edit policies * add back buttons for "users" page * remove unused * fix ui dark mode when modal is closed * bucket view details button * fix browser buttons * filer action button works * clean up masters page * fix volume servers action buttons * fix collections page action button * fix properties page * more obvious * fix directory creation file mode * Update file_browser_handlers.go * directory permission	8 months ago
Chris Lu	aa66852304	Admin UI add maintenance menu (#6944 ) * add ui for maintenance * valid config loading. fix workers page. * refactor * grpc between admin and workers * add a long-running bidirectional grpc call between admin and worker * use the grpc call to heartbeat * use the grpc call to communicate * worker can remove the http client * admin uses http port + 10000 as its default grpc port * one task one package * handles connection failures gracefully with exponential backoff * grpc with insecure tls * grpc with optional tls * fix detecting tls * change time config from nano seconds to seconds * add tasks with 3 interfaces * compiles reducing hard coded * remove a couple of tasks * remove hard coded references * reduce hard coded values * remove hard coded values * remove hard coded from templ * refactor maintenance package * fix import cycle * simplify * simplify * auto register * auto register factory * auto register task types * self register types * refactor * simplify * remove one task * register ui * lazy init executor factories * use registered task types * DefaultWorkerConfig remove hard coded task types * remove more hard coded * implement get maintenance task * dynamic task configuration * "System Settings" should only have system level settings * adjust menu for tasks * ensure menu not collapsed * render job configuration well * use templ for ui of task configuration * fix ordering * fix bugs * saving duration in seconds * use value and unit for duration * Delete WORKER_REFACTORING_PLAN.md * Delete maintenance.json * Delete custom_worker_example.go * remove address from workers * remove old code from ec task * remove creating collection button * reconnect with exponential backoff * worker use security.toml * start admin server with tls info from security.toml * fix "weed admin" cli description	9 months ago

17 Commits (737116e83c3fb2362b0bfb3c242ed95a00a511ea)