seaweedfs

Commit Graph

Author	SHA1	Message	Date
Chris Lu	5d53edb93b	Optimize database connection pool settings for MySQL and PostgreSQL (#7645 ) - Reduce connection_max_idle from 100 to 10 (PostgreSQL) and from 2 to 10 (MySQL) - Reduce connection_max_open from 100 to 50 for all database stores - Set connection_max_lifetime_seconds to 300 (5 minutes) to force connection recycling This prevents 'cannot assign requested address' errors under high load by: 1. Limiting the number of concurrent connections to reduce ephemeral port usage 2. Forcing connection recycling to prevent stale connections and port exhaustion 3. Reducing idle connections to minimize resource consumption Fixes #6887	1 week ago
chrislu	5167bbd2a9	Remove deprecated allowEmptyFolder CLI option The allowEmptyFolder option is no longer functional because: 1. The code that used it was already commented out 2. Empty folder cleanup is now handled asynchronously by EmptyFolderCleaner The CLI flags are kept for backward compatibility but marked as deprecated and ignored. This removes: - S3ApiServerOption.AllowEmptyFolder field - The actual usage in s3api_object_handlers_list.go - Helm chart values and template references - References in test Makefiles and docker-compose files	1 week ago
Chris Lu	55f0fbf364	s3: optimize DELETE by skipping lock check for buckets without Object Lock (#7642 ) This optimization avoids an expensive filer gRPC call for every DELETE operation on buckets that don't have Object Lock enabled. Before this change, enforceObjectLockProtections() would always call getObjectEntry() to fetch object metadata to check for retention/legal hold, even for buckets that never had Object Lock configured. Changes: 1. Add early return in enforceObjectLockProtections() if bucket has no Object Lock config or bucket doesn't exist 2. Add isObjectLockEnabled() helper function to check if a bucket has Object Lock configured 3. Fix validateObjectLockHeaders() to check ObjectLockConfig instead of just versioningEnabled - this ensures object-lock headers are properly rejected on buckets without Object Lock enabled, which aligns with AWS S3 semantics 4. Make bucket creation with Object Lock atomic - set Object Lock config in the same CreateEntry call as bucket creation, preventing race conditions where bucket exists without Object Lock enabled 5. Properly handle Object Lock setup failures during bucket creation - if StoreObjectLockConfigurationInExtended fails, roll back the bucket creation and return an error instead of leaving a bucket without the requested Object Lock configuration This significantly improves DELETE latency for non-Object-Lock buckets, which is the common case (lockCheck time reduced from 1-10ms to ~1µs).	1 week ago
Chris Lu	9c266fac29	fix: CompleteMultipartUpload fails for uploads with more than 1000 parts (#7641 ) When completing a multipart upload, the code was listing parts with limit=0, which relies on the server's DirListingLimit default. In 'weed server' mode, this defaults to 1000, causing uploads with more than 1000 parts to fail with InvalidPart error. For a 38GB file with 8MB parts (AWS CLI default), this results in ~4564 parts, far exceeding the 1000 limit. Fix: Use explicit limit of MaxS3MultipartParts+1 (10001) to ensure all parts are listed regardless of server configuration. Fixes #7638	1 week ago
Chris Lu	28ac536280	fix: normalize Windows backslash paths in weed admin file uploads (#7636 ) fix: normalize Windows backslash paths in file uploads When uploading files from a Windows client to a Linux server, file paths containing backslashes were not being properly interpreted as directory separators. This caused files intended for subdirectories to be created in the root directory with backslashes in their filenames. Changes: - Add util.CleanWindowsPath and util.CleanWindowsPathBase helper functions in weed/util/fullpath.go for reusable path normalization - Use path.Join/path.Clean/path.Base instead of filepath equivalents for URL path semantics (filepath is OS-specific) - Apply normalization in weed admin handlers and filer upload parsing Fixes #7628	1 week ago
Chris Lu	89b6deaefa	fix: Use mime.FormatMediaType for RFC 6266 compliant Content-Disposition (#7635 ) Updated Content-Disposition header generation to use mime.FormatMediaType from the standard library, which properly handles non-ASCII characters and special characters per RFC 6266. Changes: - weed/server/common.go: Updated adjustHeaderContentDisposition to use mime.FormatMediaType instead of manual escaping with fileNameEscaper - weed/operation/upload_content.go: Updated multipart form Content-Disposition to use mime.FormatMediaType - weed/server/volume_server_handlers_read.go: Removed unused fileNameEscaper This ensures correct filename display for international users across filer downloads and file uploads. Fixes #7634	1 week ago
Chris Lu	f1384108e8	fix: Admin UI file browser uses https.client TLS config for filer communication (#7633 ) * fix: Admin UI file browser uses https.client TLS config for filer communication When filer is configured with HTTPS (https.filer section in security.toml), the Admin UI file browser was still using plain HTTP for file uploads, downloads, and viewing. This caused TLS handshake errors: 'http: TLS handshake error: client sent an HTTP request to an HTTPS server' This fix: - Updates FileBrowserHandlers to use the HTTPClient from weed/util/http/client which properly loads TLS configuration from https.client section - The HTTPClient automatically uses HTTPS when https.client.enabled=true - All file operations (upload, download, view) now respect TLS configuration - Falls back to plain HTTP if TLS client creation fails Fixes #7631 * fix: Address code review comments - Fix fallback client Transport wiring (properly assign transport to http.Client) - Use per-operation timeouts instead of unified 60s timeout: - uploadFileToFiler: 60s (for large file uploads) - ViewFile: 30s (original timeout) - isLikelyTextFile: 10s (original timeout) * fix: Proxy file downloads through Admin UI for mTLS support The DownloadFile function previously used browser redirect, which would fail when filer requires mutual TLS (client certificates) since the browser doesn't have these certificates. Now the Admin UI server proxies the download, using its TLS-aware HTTP client with the configured client certificates, then streams the response to the browser. * fix: Ensure HTTP response body is closed on non-200 responses In ViewFile, the response body was only closed on 200 OK paths, which could leak connections on non-200 responses. Now the body is always closed via defer immediately after checking err == nil, before checking the status code. * refactor: Extract fetchFileContent helper to reduce nesting in ViewFile Extracted the deeply nested file fetch logic (7+ levels) into a separate fetchFileContent helper method. This improves readability while maintaining the same TLS-aware behavior and error handling. * refactor: Use idiomatic Go error handling in fetchFileContent Changed fetchFileContent to return (string, error) instead of (content string, reason string) for idiomatic Go error handling. This enables error wrapping and standard 'if err != nil' checks. Also improved error messages to be more descriptive for debugging, including the HTTP status code and response body on non-200 responses. * refactor: Extract newClientWithTimeout helper to reduce code duplication - Added newClientWithTimeout() helper method that creates a temporary http.Client with the specified timeout, reusing the TLS transport - Updated uploadFileToFiler, fetchFileContent, DownloadFile, and isLikelyTextFile to use the new helper - Improved error message in DownloadFile to include response body for better debuggability (consistent with fetchFileContent) * fix: Address CodeRabbit review comments - Fix connection leak in isLikelyTextFile: ensure resp.Body.Close() is called even when status code is not 200 - Use http.NewRequestWithContext in DownloadFile so the filer request is cancelled when the client disconnects, improving resource cleanup * fix: Escape Content-Disposition filename per RFC 2616 Filenames containing quotes, backslashes, or special characters could break the Content-Disposition header or cause client-side parsing issues. Now properly escapes these characters before including in the header. * fix: Handle io.ReadAll errors when reading error response bodies In fetchFileContent and DownloadFile, the error from io.ReadAll was ignored when reading the filer's error response body. Now properly handles these errors to provide complete error messages. * fix: Fail fast when TLS client creation fails If TLS is enabled (https.client.enabled=true) but misconfigured, fail immediately with glog.Fatalf rather than silently falling back to plain HTTP. This prevents confusing runtime errors when the filer only accepts HTTPS connections. * fix: Use mime.FormatMediaType for RFC 6266 compliant Content-Disposition Replace manual escaping with mime.FormatMediaType which properly handles non-ASCII characters and special characters per RFC 6266, ensuring correct filename display for international users.	1 week ago
msementsov	c0dad091f1	Separate vacuum speed from replication speed (#7632 )	1 week ago
Chris Lu	4cc6a2a4e5	fix: Admin UI user creation fails before filer discovery (#7624 ) (#7625 ) * fix: Admin UI user creation fails before filer discovery (#7624) The credential manager's filer address function was not configured quickly enough after admin server startup, causing 'filer address function not configured' errors when users tried to create users immediately. Changes: - Use exponential backoff (200ms -> 5s) instead of fixed 5s polling for faster filer discovery on startup - Improve error messages to be more user-friendly and actionable Fixes #7624 * Add more debug logging to help diagnose filer discovery issues * fix: Use dynamic filer address function to eliminate race condition Instead of using a goroutine to wait for filer discovery before setting the filer address function, we now set a dynamic function immediately that returns the current filer address whenever it's called. This eliminates the race condition where users could create users before the goroutine completed, and provides clearer error messages when no filer is available. The dynamic function is HA-aware - it automatically returns whatever filer is currently available, adapting to filer failovers.	1 week ago
Chris Lu	5c1de633cb	mount: improve read throughput with parallel chunk fetching (#7627 ) * filer: remove lock contention during chunk download This addresses issue #7504 where a single weed mount FUSE instance does not fully utilize node network bandwidth when reading large files. The SingleChunkCacher was holding a mutex during the entire HTTP download, causing readers to block until the download completed. This serialized chunk reads even when multiple goroutines were downloading in parallel. Changes: - Add sync.Cond to SingleChunkCacher for efficient waiting - Move HTTP download outside the critical section in startCaching() - Use condition variable in readChunkAt() to wait for download completion - Add isComplete flag to track download state Now multiple chunk downloads can proceed truly in parallel, and readers wait efficiently using the condition variable instead of blocking on a mutex held during I/O operations. Ref: #7504 * filer: parallel chunk fetching within doReadAt This addresses issue #7504 by enabling parallel chunk downloads within a single read operation. Previously, doReadAt() processed chunks sequentially in a loop, meaning each chunk had to be fully downloaded before the next one started. This left significant network bandwidth unused when chunks resided on different volume servers. Changes: - Collect all chunk read tasks upfront - Use errgroup to fetch multiple chunks in parallel - Each chunk reads directly into its correct buffer position - Limit concurrency to prefetchCount (min 4) to avoid overwhelming the system - Handle gaps and zero-filling before parallel fetch - Trigger prefetch after parallel reads complete For a read spanning N chunks on different volume servers, this can now utilize up to N times the bandwidth of a single connection. Ref: #7504 * http: direct buffer read to reduce memory copies This addresses issue #7504 by reducing memory copy overhead during chunk downloads. Previously, RetriedFetchChunkData used ReadUrlAsStream which: 1. Allocated a 64KB intermediate buffer 2. Read data in 64KB chunks 3. Called a callback to copy each chunk to the destination For a 16MB chunk, this meant 256 copy operations plus the callback overhead. Profiling showed significant time spent in memmove. Changes: - Add readUrlDirectToBuffer() that reads directly into the destination - Add retriedFetchChunkDataDirect() for unencrypted, non-gzipped chunks - Automatically use direct read path when possible (cipher=nil, gzip=false) - Use http.NewRequestWithContext for proper cancellation For unencrypted chunks (the common case), this eliminates the intermediate buffer entirely, reading HTTP response bytes directly into the final destination buffer. Ref: #7504 * address review comments - Use channel (done) instead of sync.Cond for download completion signaling This integrates better with context cancellation patterns - Remove redundant groupErr check in reader_at.go (errors are already captured in task.err) - Remove buggy URL encoding logic from retriedFetchChunkDataDirect (The existing url.PathEscape on full URL is a pre-existing bug that should be fixed separately) * address review comments (round 2) - Return io.ErrUnexpectedEOF when HTTP response is truncated This prevents silent data corruption from incomplete reads - Simplify errgroup error handling by using g.Wait() error directly Remove redundant task.err field and manual error aggregation loop - Define minReadConcurrency constant instead of magic number 4 Improves code readability and maintainability Note: Context propagation to startCaching() is intentionally NOT changed. The downloaded chunk is a shared resource that may be used by multiple readers. Using context.Background() ensures the download completes even if one reader cancels, preventing data loss for other waiting readers. * http: inject request ID for observability in direct read path Add request_id.InjectToRequest() call to readUrlDirectToBuffer() for consistency with ReadUrlAsStream path. This ensures full-chunk reads carry the same tracing/correlation headers for server logs and metrics. * filer: consistent timestamp handling in sequential read path Use max(ts, task.chunk.ModifiedTsNs) in sequential path to match parallel path behavior. Also update ts before error check so that on failure, the returned timestamp reflects the max of all chunks processed so far. * filer: document why context.Background() is used in startCaching Add comment explaining the intentional design decision: the downloaded chunk is a shared resource that may be used by multiple concurrent readers. Using context.Background() ensures the download completes even if one reader cancels, preventing errors for other waiting readers. * filer: propagate context for reader cancellation Address review comment: pass context through ReadChunkAt call chain so that a reader can cancel its wait for a download. The key distinction is: - Download uses context.Background() - shared resource, always completes - Reader wait uses request context - can be cancelled individually If a reader cancels, it stops waiting and returns ctx.Err(), but the download continues to completion for other readers waiting on the same chunk. This properly handles the shared resource semantics while still allowing individual reader cancellation. * filer: use defer for close(done) to guarantee signal on panic Move close(s.done) to a defer statement at the start of startCaching() to ensure the completion signal is always sent, even if an unexpected panic occurs. This prevents readers from blocking indefinitely. * filer: remove unnecessary code - Remove close(s.cacheStartedCh) in destroy() - the channel is only used for one-time synchronization, closing it provides no benefit - Remove task := task loop variable capture - Go 1.22+ fixed loop variable semantics, this capture is no longer necessary (go.mod specifies Go 1.24.0) * filer: restore fallback to chunkCache when cacher returns no data Fix critical issue where ReadChunkAt would return 0,nil immediately if SingleChunkCacher couldn't provide data for the requested offset, without trying the chunkCache fallback. Now if cacher.readChunkAt returns n=0 and err=nil, we fall through to try chunkCache. * filer: add comprehensive tests for ReaderCache Tests cover: - Context cancellation while waiting for download - Fallback to chunkCache when cacher returns n=0, err=nil - Multiple concurrent readers waiting for same chunk - Partial reads at different offsets - Downloader cleanup when exceeding cache limit - Done channel signaling (no hangs on completion) * filer: prioritize done channel over context cancellation If data is already available (done channel closed), return it even if the reader's context is also cancelled. This avoids unnecessary errors when the download has already completed. * filer: add lookup error test and document test limitations Add TestSingleChunkCacherLookupError to test error handling when lookup fails. Document that full HTTP integration tests for SingleChunkCacher require global HTTP client initialization which is complex in unit tests. The download path is tested via FUSE integration tests. * filer: add tests that exercise SingleChunkCacher concurrency logic Add tests that use blocking lookupFileIdFn to exercise the actual SingleChunkCacher wait/cancellation logic: - TestSingleChunkCacherContextCancellationDuringLookup: tests reader cancellation while lookup is blocked - TestSingleChunkCacherMultipleReadersWaitForDownload: tests multiple readers waiting on the same download - TestSingleChunkCacherOneReaderCancelsOthersContinue: tests that when one reader cancels, other readers continue waiting These tests properly exercise the done channel wait/cancel logic without requiring HTTP calls - the blocking lookup simulates a slow download.	2 weeks ago
Chris Lu	3183a49698	fix: S3 downloads failing after idle timeout (#7626 ) * fix: S3 downloads failing after idle timeout (#7618) The idle timeout was incorrectly terminating active downloads because read and write deadlines were managed independently. During a download, the server writes data but rarely reads, so the read deadline would expire even though the connection was actively being used. Changes: 1. Simplify to single Timeout field - since this is a 'no activity timeout' where any activity extends the deadline, separate read/write timeouts are unnecessary. Now uses SetDeadline() which sets both at once. 2. Implement proper 'no activity timeout' - any activity (read or write) now extends the deadline. The connection only times out when there's genuinely no activity in either direction. 3. Increase default S3 idleTimeout from 10s to 120s for additional safety margin when fetching chunks from slow storage backends. Fixes #7618 * Update weed/util/net_timeout.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	2 weeks ago
Chris Lu	f9b4a4c396	fix: check freeEcSlot before evacuating EC shards to prevent data loss (#7621 ) * fix: check freeEcSlot before evacuating EC shards to prevent data loss Related to #7619 The moveAwayOneEcVolume function was missing the freeEcSlot check that exists in other EC shard placement functions. This could cause EC shards to be moved to volume servers that have no capacity, resulting in: 1. 0-byte shard files when disk is full 2. Data loss when source shards are deleted after 'successful' copy Changes: - Add freeEcSlot check before attempting to move EC shards - Sort destinations by both shard count and free slots - Refresh topology during evacuation to get updated slot counts - Log when nodes are skipped due to no free slots - Update freeEcSlot count after successful moves * fix: clarify comment wording per CodeRabbit review The comment stated 'after each move' but the code executes before calling moveAwayOneEcVolume. Updated to 'before moving each EC volume' for accuracy. * fix: collect topology once and track capacity changes locally Remove the topology refresh within the loop as it gives a false sense of correctness - the refreshed topology could still be stale (minutes old). Instead, we: 1. Collect topology once at the start 2. Track capacity changes ourselves via freeEcSlot decrement after each move This is more accurate because we know exactly what moves we've made, rather than relying on potentially stale topology refreshes. * fix: ensure partial EC volume moves are reported as failures Set hasMoved=false when a shard fails to move, even if previous shards succeeded. This prevents the caller from incorrectly assuming the entire volume was evacuated, which could lead to data loss if the source server is decommissioned based on this incorrect status. * fix: also reset hasMoved on moveMountedShardToEcNode error Same issue as the previous fix: if moveMountedShardToEcNode fails after some shards succeeded, hasMoved would incorrectly be true. Ensure partial moves are always reported as failures.	2 weeks ago
Chris Lu	fdb888729b	fix: properly handle errors in writeToFile to prevent 0-byte EC shards (#7620 ) Fixes #7619 The writeToFile function had two critical bugs that could cause data loss during EC shard evacuation when the destination disk is full: Bug 1: When os.OpenFile fails (e.g., disk full), the error was silently ignored and nil was returned. This caused the caller to think the copy succeeded. Bug 2: When dst.Write fails (e.g., 'no space left on device'), the error was completely ignored because the return value was not checked. When evacuating EC shards to a full volume server (especially on BTRFS): 1. OpenFile may succeed (creates 0-byte file inode) 2. Write fails with 'no space left on device' 3. Errors were ignored, function returned nil 4. Caller thinks copy succeeded and deletes source shard 5. Result: 0-byte shard on destination, data loss! This fix ensures both errors are properly returned, preventing data loss. Added unit tests to verify the fix.	2 weeks ago
Chris Lu	716f21fbd3	s3: support STREAMING-AWS4-HMAC-SHA256-PAYLOAD-TRAILER for signed chunked uploads with checksums (#7623 ) * s3: support STREAMING-AWS4-HMAC-SHA256-PAYLOAD-TRAILER for signed chunked uploads with checksums When AWS SDK v2 clients upload with both chunked encoding and checksum validation enabled, they use the x-amz-content-sha256 header value of STREAMING-AWS4-HMAC-SHA256-PAYLOAD-TRAILER instead of the simpler STREAMING-AWS4-HMAC-SHA256-PAYLOAD. This caused the chunked reader to not be properly activated, resulting in chunk-signature metadata being stored as part of the file content. Changes: - Add streamingSignedPayloadTrailer constant for the new header value - Update isRequestSignStreamingV4() to recognize this header - Update newChunkedReader() to handle this streaming type - Update calculateSeedSignature() to accept this header - Add unit test for signed streaming upload with trailer Fixes issue where Quarkus/AWS SDK v2 uploads with checksum validation resulted in corrupted file content containing chunk-signature data. * address review comments: add trailer signature to test, fix constant alignment * test: separate canonical trailer text (\n) from on-wire format (\r\n) * test: add negative test for invalid trailer signature * refactor: check HTTP method first in streaming auth checks (fail-fast) * test: handle crc32 Write error return for completeness * refactor: extract createTrailerStreamingRequest helper to reduce test duplication * fmt * docs: clarify test comment about trailer signature validation status * refactor: calculate chunk data length dynamically instead of hardcoding * Update weed/s3api/chunked_reader_v4_test.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * fix: use current time for signatures instead of hardcoded past date --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	2 weeks ago
Chris Lu	a5ab05ec03	fix: S3 GetObject/HeadObject with PartNumber should return object ETag, not part ETag (#7622 ) AWS S3 behavior: when calling GetObject or HeadObject with the PartNumber query parameter, the ETag header should still return the complete object's ETag (e.g., 'abc123-4' for a 4-part multipart upload), not the individual part's ETag. The previous implementation incorrectly overrode the ETag with the part's ETag, causing test_multipart_get_part to fail. This fix removes the ETag override logic while keeping: - x-amz-mp-parts-count header (correct) - Content-Length adjusted to part size (correct) - Range calculation for part boundaries (correct)	2 weeks ago
chrislu	8d110b29dd	fmt	2 weeks ago
Chris Lu	39ba19eea6	filer: async empty folder cleanup via metadata events (#7614 ) * filer: async empty folder cleanup via metadata events Implements asynchronous empty folder cleanup when files are deleted in S3. Key changes: 1. EmptyFolderCleaner - New component that handles folder cleanup: - Uses consistent hashing (LockRing) to determine folder ownership - Each filer owns specific folders, avoiding duplicate cleanup work - Debounces delete events (10s delay) to batch multiple deletes - Caches rough folder counts to skip unnecessary checks - Cancels pending cleanup when new files are created - Handles both file and subdirectory deletions 2. Integration with metadata events: - Listens to both local and remote filer metadata events - Processes create/delete/rename events to track folder state - Only processes folders under /buckets/<bucket>/... 3. Removed synchronous empty folder cleanup from S3 handlers: - DeleteObjectHandler no longer calls DoDeleteEmptyParentDirectories - DeleteMultipleObjectsHandler no longer tracks/cleans directories - Cleanup now happens asynchronously via metadata events Benefits: - Non-blocking: S3 delete requests return immediately - Coordinated: Only one filer (the owner) cleans each folder - Efficient: Batching and caching reduce unnecessary checks - Event-driven: Folder deletion triggers parent folder check automatically * filer: add CleanupQueue data structure for deduplicated folder cleanup CleanupQueue uses a linked list for FIFO ordering and a hashmap for O(1) deduplication. Processing is triggered when: - Queue size reaches maxSize (default 1000), OR - Oldest item exceeds maxAge (default 10 minutes) Key features: - O(1) Add, Remove, Pop, Contains operations - Duplicate folders are ignored (keeps original position/time) - Testable with injectable time function - Thread-safe with mutex protection * filer: use CleanupQueue for empty folder cleanup Replace timer-per-folder approach with queue-based processing: - Use CleanupQueue for deduplication and ordered processing - Process queue when full (1000 items) or oldest item exceeds 10 minutes - Background processor checks queue every 10 seconds - Remove from queue on create events to cancel pending cleanup Benefits: - Bounded memory: queue has max size, not unlimited timers - Efficient: O(1) add/remove/contains operations - Batch processing: handle many folders efficiently - Better for high-volume delete scenarios * filer: CleanupQueue.Add moves duplicate to back with updated time When adding a folder that already exists in the queue: - Remove it from its current position - Add it to the back of the queue - Update the queue time to current time This ensures that folders with recent delete activity are processed later, giving more time for additional deletes to occur. * filer: CleanupQueue uses event time and inserts in sorted order Changes: - Add() now takes eventTime parameter instead of using current time - Insert items in time-sorted order (oldest at front) to handle out-of-order events - When updating duplicate with newer time, reposition to maintain sort order - Ignore updates with older time (keep existing later time) This ensures proper ordering when processing events from distributed filers where event arrival order may not match event occurrence order. * filer: remove unused CleanupQueue functions (SetNowFunc, GetAll) Removed test-only functions: - SetNowFunc: tests now use real time with past event times - GetAll: tests now use Pop() to verify order Kept functions used in production: - Peek: used in filer_notify_read.go - OldestAge: used in empty_folder_cleaner.go logging * filer: initialize cache entry on first delete/create event Previously, roughCount was only updated if the cache entry already existed, but entries were only created during executeCleanup. This meant delete/create events before the first cleanup didn't track the count. Now create the cache entry on first event, so roughCount properly tracks all changes from the start. * filer: skip adding to cleanup queue if roughCount > 0 If the cached roughCount indicates there are still items in the folder, don't bother adding it to the cleanup queue. This avoids unnecessary queue entries and reduces wasted cleanup checks. * filer: don't create cache entry on create event Only update roughCount if the folder is already being tracked. New folders don't need tracking until we see a delete event. * filer: move empty folder cleanup to its own package - Created weed/filer/empty_folder_cleanup package - Defined FilerOperations interface to break circular dependency - Added CountDirectoryEntries method to Filer - Exported IsUnderPath and IsUnderBucketPath helper functions * filer: make isUnderPath and isUnderBucketPath private These helpers are only used within the empty_folder_cleanup package.	2 weeks ago
Chris Lu	e361daa754	fix: SFTP HomeDir path translation for user operations (#7611 ) * fix: SFTP HomeDir path translation for user operations When users have a non-root HomeDir (e.g., '/sftp/user'), their SFTP operations should be relative to that directory. Previously, when a user uploaded to '/' via SFTP, the path was not translated to their home directory, causing 'permission denied for / for permission write'. This fix adds a toAbsolutePath() method that implements chroot-like behavior where the user's HomeDir becomes their root. All file and directory operations now translate paths through this method. Example: User with HomeDir='/sftp/user' uploading to '/' now correctly maps to '/sftp/user'. Fixes: https://github.com/seaweedfs/seaweedfs/issues/7470 * test: add SFTP integration tests Add comprehensive integration tests for the SFTP server including: - HomeDir path translation tests (verifies fix for issue #7470) - Basic file upload/download operations - Directory operations (mkdir, rmdir, list) - Large file handling (1MB test) - File rename operations - Stat/Lstat operations - Path edge cases (trailing slashes, .., unicode filenames) - Admin root access verification The test framework starts a complete SeaweedFS cluster with: - Master server - Volume server - Filer server - SFTP server with test user credentials Test users are configured in testdata/userstore.json: - admin: HomeDir=/ with full access - testuser: HomeDir=/sftp/testuser with access to home - readonly: HomeDir=/public with read-only access * fix: correct SFTP HomeDir path translation and add CI Fix path.Join issue where paths starting with '/' weren't joined correctly. path.Join('/sftp/user', '/file') returns '/file' instead of '/sftp/user/file'. Now we strip the leading '/' before joining. Test improvements: - Update go.mod to Go 1.24 - Fix weed binary discovery to prefer local build over PATH - Add stabilization delay after service startup - All 8 SFTP integration tests pass locally Add GitHub Actions workflow for SFTP tests: - Runs on push/PR affecting sftpd code or tests - Tests HomeDir path translation, file ops, directory ops - Covers issue #7470 fix verification * security: update golang.org/x/crypto to v0.45.0 Addresses security vulnerability in golang.org/x/crypto < 0.45.0 * security: use proper SSH host key verification in tests Replace ssh.InsecureIgnoreHostKey() with ssh.FixedHostKey() that verifies the server's host key matches the known test key we generated. This addresses CodeQL warning go/insecure-hostkeycallback. Also updates go.mod to specify go 1.24.0 explicitly. * security: fix path traversal vulnerability in SFTP toAbsolutePath The previous implementation had a critical security vulnerability: - Path traversal via '../..' could escape the HomeDir chroot jail - Absolute paths were not correctly prefixed with HomeDir The fix: 1. Concatenate HomeDir with userPath directly, then clean 2. Add security check to ensure final path stays within HomeDir 3. If traversal detected, safely return HomeDir instead Also adds path traversal prevention tests to verify the fix. * fix: address PR review comments 1. Fix SkipCleanup check to use actual test config instead of default - Added skipCleanup field to SftpTestFramework struct - Store config.SkipCleanup during Setup() - Use f.skipCleanup in Cleanup() instead of DefaultTestConfig() 2. Fix path prefix check false positive in mkdir - Changed from strings.HasPrefix(absPath, fs.user.HomeDir) - To: absPath == fs.user.HomeDir \|\| strings.HasPrefix(absPath, fs.user.HomeDir+"/") - Prevents matching partial directory names (e.g., /sftp/username when HomeDir is /sftp/user) * fix: check write permission on parent dir for mkdir Aligns makeDir's permission check with newFileWriter for consistency. To create a directory, a user needs write permission on the parent directory, not mkdir permission on the new directory path. * fix: refine SFTP path traversal logic and tests 1. Refine toAbsolutePath: - Use path.Join with strings.TrimPrefix for idiomatic path construction - Return explicit error on path traversal attempt instead of clamping - Updated all call sites to handle the error 2. Add Unit Tests: - Added sftp_server_test.go to verify toAbsolutePath logic - Covers normal paths, root path, and various traversal attempts 3. Update Integration Tests: - Updated PathTraversalPrevention test to reflect that standard SFTP clients sanitize paths before sending. The test now verifies successful containment within the jail rather than blocking (since the server receives a clean path). - The server-side blocking is verified by the new unit tests. 4. Makefile: - Removed -v from default test target * fix: address PR comments on tests and makefile 1. Enhanced Unit Tests: - Added edge cases (empty path, multiple slashes, trailing slash) to sftp_server_test.go 2. Makefile Improvements: - Added 'all' target as default entry point 3. Code Clarity: - Added comment to mkdir permission check explaining defensive nature of HomeDir check * fix: address PR review comments on permissions and tests 1. Security: - Added write permission check on target directory in renameEntry 2. Logging: - Changed dispatch log verbosity from V(0) to V(1) 3. Testing: - Updated Makefile .PHONY targets - Added unit test cases for empty/root HomeDir behavior in toAbsolutePath * fix: set SFTP starting directory to virtual root 1. Critical Fix: - Changed sftp.WithStartDirectory from fs.user.HomeDir to '/' - Prevents double-prefixing when toAbsolutePath translates paths - Users now correctly start at their virtual root which maps to HomeDir 2. Test Improvements: - Use pointer for homeDir in tests for clearer nil vs empty distinction * fix: clean HomeDir at config load time Clean HomeDir path when loading users from JSON config. This handles trailing slashes and other path anomalies at the source, ensuring consistency throughout the codebase and avoiding repeated cleaning on every toAbsolutePath call. * test: strengthen assertions and add error checking in SFTP tests 1. Add error checking for cleanup operations in TestWalk 2. Strengthen cwd assertion to expect '/' explicitly in TestCurrentWorkingDirectory 3. Add error checking for cleanup in PathTraversalPrevention test	2 weeks ago
Lisandro Pin	d59cc1b09f	Fix handling of fixed read-only volumes for `volume.check.disk`. (#7612 ) There's unfortunatley no way to tell whether a volume is flagged read-only because it got full, or because it is faulty. To address this, modify the check logic so all read-only volumes are processed; if no changes are written (i.e. the volume is healthy) it is kept as read-only. Volumes which are modified in this process are deemed fixed, and switched to writable.	2 weeks ago
Xiao Wei	3bcadc9f90	fix: update getVersioningState to signal non-existent buckets with Er… (#7613 ) * fix: update getVersioningState to signal non-existent buckets with ErrNotFound This change modifies the getVersioningState function to return filer_pb.ErrNotFound when a requested bucket does not exist, allowing callers to handle the situation appropriately, such as auto-creating the bucket in PUT handlers. This improves error handling and clarity in the API's behavior regarding bucket existence. * Update weed/s3api/s3api_bucket_config.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> --------- Co-authored-by: 洪晓威 <xiaoweihong@deepglint.com> Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	2 weeks ago
Chris Lu	e9da64f62a	fix: volume server healthz now checks local conditions only (#7610 ) This fixes issue #6823 where a single volume server shutdown would cause other healthy volume servers to fail their health checks and get restarted by Kubernetes, causing a cascading failure. Previously, the healthz handler checked if all replicated volumes could reach their remote replicas via GetWritableRemoteReplications(). When a volume server went down, the master would remove it from the volume location list. Other volume servers would then fail their healthz checks because they couldn't find all required replicas, causing Kubernetes to restart them. The healthz endpoint now only checks local conditions: 1. Is the server shutting down? 2. Is the server heartbeating with the master? This follows the principle that a health check should only verify the health of THIS server, not the overall cluster state. Fixes #6823	2 weeks ago
Chris Lu	5ed0b00fb9	Support separate volume server ID independent of RPC bind address (#7609 ) * pb: add id field to Heartbeat message for stable volume server identification This adds an 'id' field to the Heartbeat protobuf message that allows volume servers to identify themselves independently of their IP:port address. Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * storage: add Id field to Store struct Add Id field to Store struct and include it in CollectHeartbeat(). The Id field provides a stable volume server identity independent of IP:port. Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * topology: support id-based DataNode identification Update GetOrCreateDataNode to accept an id parameter for stable node identification. When id is provided, the DataNode can maintain its identity even when its IP address changes (e.g., in Kubernetes pod reschedules). For backward compatibility: - If id is provided, use it as the node ID - If id is empty, fall back to ip:port Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * volume: add -id flag for stable volume server identity Add -id command line flag to volume server that allows specifying a stable identifier independent of the IP address. This is useful for Kubernetes deployments with hostPath volumes where pods can be rescheduled to different nodes while the persisted data remains on the original node. Usage: weed volume -id=node-1 -ip=10.0.0.1 ... If -id is not specified, it defaults to ip:port for backward compatibility. Fixes https://github.com/seaweedfs/seaweedfs/issues/7487 * server: add -volume.id flag to weed server command Support the -volume.id flag in the all-in-one 'weed server' command, consistent with the standalone 'weed volume' command. Usage: weed server -volume.id=node-1 ... Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * topology: add test for id-based DataNode identification Test the key scenarios: 1. Create DataNode with explicit id 2. Same id with different IP returns same DataNode (K8s reschedule) 3. IP/PublicUrl are updated when node reconnects with new address 4. Different id creates new DataNode 5. Empty id falls back to ip:port (backward compatibility) Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * pb: add address field to DataNodeInfo for proper node addressing Previously, DataNodeInfo.Id was used as the node address, which worked when Id was always ip:port. Now that Id can be an explicit string, we need a separate Address field for connection purposes. Changes: - Add 'address' field to DataNodeInfo protobuf message - Update ToDataNodeInfo() to populate the address field - Update NewServerAddressFromDataNode() to use Address (with Id fallback) - Fix LookupEcVolume to use dn.Url() instead of dn.Id() Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * fix: trim whitespace from volume server id and fix test - Trim whitespace from -id flag to treat ' ' as empty - Fix store_load_balancing_test.go to include id parameter in NewStore call Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * refactor: extract GetVolumeServerId to util package Move the volume server ID determination logic to a shared utility function to avoid code duplication between volume.go and rack.go. Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * fix: improve transition logic for legacy nodes - Use exact ip:port match instead of net.SplitHostPort heuristic - Update GrpcPort and PublicUrl during transition for consistency - Remove unused net import Ref: https://github.com/seaweedfs/seaweedfs/issues/7487 * fix: add id normalization and address change logging - Normalize id parameter at function boundary (trim whitespace) - Log when DataNode IP:Port changes (helps debug K8s pod rescheduling) Ref: https://github.com/seaweedfs/seaweedfs/issues/7487	2 weeks ago
Chris Lu	51841a2e04	fix: skip cookie validation for EC volume deletion when SkipCookieCheck is set (#7608 ) fix: EC volume deletion issues Fixes #7489 1. Skip cookie check for EC volume deletion when SkipCookieCheck is set When batch deleting files from EC volumes with SkipCookieCheck=true (e.g., orphan file cleanup), the cookie is not available. The deletion was failing with 'unexpected cookie 0' because DeleteEcShardNeedle always validated the cookie. 2. Optimize doDeleteNeedleFromAtLeastOneRemoteEcShards to return early Return immediately when a deletion succeeds, instead of continuing to try all parity shards unnecessarily. 3. Remove useless log message that always logged nil error The log at V(1) was logging err after checking it was nil. Regression introduced in commit `7bdae5172` (Jan 3, 2023) when EC batch delete support was added.	2 weeks ago
Chris Lu	4f038820dc	Add disk-aware EC rebalancing (#7597 ) * Add placement package for EC shard placement logic - Consolidate EC shard placement algorithm for reuse across shell and worker tasks - Support multi-pass selection: racks, then servers, then disks - Include proper spread verification and scoring functions - Comprehensive test coverage for various cluster topologies * Make ec.balance disk-aware for multi-disk servers - Add EcDisk struct to track individual disks on volume servers - Update EcNode to maintain per-disk shard distribution - Parse disk_id from EC shard information during topology collection - Implement pickBestDiskOnNode() for selecting best disk per shard - Add diskDistributionScore() for tie-breaking node selection - Update all move operations to specify target disk in RPC calls - Improves shard balance within multi-disk servers, not just across servers * Use placement package in EC detection for consistent disk-level placement - Replace custom EC disk selection logic with shared placement package - Convert topology DiskInfo to placement.DiskCandidate format - Use SelectDestinations() for multi-rack/server/disk spreading - Convert placement results back to topology DiskInfo for task creation - Ensures EC detection uses same placement logic as shell commands * Make volume server evacuation disk-aware - Use pickBestDiskOnNode() when selecting evacuation target disk - Specify target disk in evacuation RPC requests - Maintains balanced disk distribution during server evacuations * Rename PlacementConfig to PlacementRequest for clarity PlacementRequest better reflects that this is a request for placement rather than a configuration object. This improves API semantics. * Rename DefaultConfig to DefaultPlacementRequest Aligns with the PlacementRequest type naming for consistency * Address review comments from Gemini and CodeRabbit Fix HIGH issues: - Fix empty disk discovery: Now discovers all disks from VolumeInfos, not just from EC shards. This ensures disks without EC shards are still considered for placement. - Fix EC shard count calculation in detection.go: Now correctly filters by DiskId and sums actual shard counts using ShardBits.ShardIdCount() instead of just counting EcShardInfo entries. Fix MEDIUM issues: - Add disk ID to evacuation log messages for consistency with other logging - Remove unused serverToDisks variable in placement.go - Fix comment that incorrectly said 'ascending' when sorting is 'descending' * add ec tests * Update ec-integration-tests.yml * Update ec_integration_test.go * Fix EC integration tests CI: build weed binary and update actions - Add 'Build weed binary' step before running tests - Update actions/setup-go from v4 to v6 (Node20 compatibility) - Update actions/checkout from v2 to v4 (Node20 compatibility) - Move working-directory to test step only * Add disk-aware EC rebalancing integration tests - Add TestDiskAwareECRebalancing test with multi-disk cluster setup - Test EC encode with disk awareness (shows disk ID in output) - Test EC balance with disk-level shard distribution - Add helper functions for disk-level verification: - startMultiDiskCluster: 3 servers x 4 disks each - countShardsPerDisk: track shards per disk per server - calculateDiskShardVariance: measure distribution balance - Verify no single disk is overloaded with shards	2 weeks ago
Lisandro Pin	ebb06a3908	Mutex command output writes for `volume.check.disk`. (#7605 ) Prevents potential screen garbling when operations are parallelized .Also simplifies logging by automatically adding newlines on output, if necessary. Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>	2 weeks ago
Lisandro Pin	ee775825bc	Parallelize read-only volume check pass for `volume.check.disk`. (#7602 )	2 weeks ago
Chris Lu	733ca8e6df	Fix SSE-S3 copy: preserve encryption metadata and set chunk SSE type (#7598 ) * Fix SSE-S3 copy: preserve encryption metadata and set chunk SSE type Fixes GitHub #7562: Copying objects between encrypted buckets was failing. Root causes: 1. processMetadataBytes was re-adding SSE headers from source entry, undoing the encryption header filtering. Now uses dstEntry.Extended which is already filtered. 2. SSE-S3 streaming copy returned nil metadata. Now properly generates and returns SSE-S3 destination metadata (SeaweedFSSSES3Key, AES256 header) via ExecuteStreamingCopyWithMetadata. 3. Chunks created during streaming copy didn't have SseType set. Now sets SseType and per-chunk SseMetadata with chunk-specific IVs for SSE-S3, enabling proper decryption on GetObject. * Address review: make SSE-S3 metadata serialization failures fatal errors - In executeEncryptCopy: return error instead of just logging if SerializeSSES3Metadata fails - In createChunkFromData: return error if chunk SSE-S3 metadata serialization fails This ensures objects/chunks are never created without proper encryption metadata, preventing unreadable/corrupted data. * fmt * Refactor: reuse function names instead of creating WithMetadata variants - Change ExecuteStreamingCopy to return (EncryptionSpec, error) directly - Remove ExecuteStreamingCopyWithMetadata wrapper - Change executeStreamingReencryptCopy to return (EncryptionSpec, error) - Remove executeStreamingReencryptCopyWithMetadata wrapper - Update callers to ignore encryption spec with _ where not needed * Add TODO documenting large file SSE-S3 copy limitation The streaming copy approach encrypts the entire stream with a single IV but stores data in chunks with per-chunk IVs. This causes decryption issues for large files. Small inline files work correctly. This is a known architectural issue that needs separate work to fix. * Use chunk-by-chunk encryption for SSE-S3 copy (consistent with SSE-C/SSE-KMS) Instead of streaming encryption (which had IV mismatch issues for multi-chunk files), SSE-S3 now uses the same chunk-by-chunk approach as SSE-C and SSE-KMS: 1. Extended copyMultipartCrossEncryption to handle SSE-S3: - Added SSE-S3 source decryption in copyCrossEncryptionChunk - Added SSE-S3 destination encryption with per-chunk IVs - Added object-level metadata generation for SSE-S3 destinations 2. Updated routing in executeEncryptCopy/executeDecryptCopy/executeReencryptCopy to use copyMultipartCrossEncryption for all SSE-S3 scenarios 3. Removed streaming copy functions (shouldUseStreamingCopy, executeStreamingReencryptCopy) as they're no longer used 4. Added large file (1MB) integration test to verify chunk-by-chunk copy works This ensures consistent behavior across all SSE types and fixes data corruption that occurred with large files in the streaming copy approach. * fmt * fmt * Address review: fail explicitly if SSE-S3 metadata is missing Instead of silently ignoring missing SSE-S3 metadata (which could create unreadable objects), now explicitly fail the copy operation with a clear error message if: - First chunk is missing - First chunk doesn't have SSE-S3 type - First chunk has empty SSE metadata - Deserialization fails * Address review: improve comment to reflect full scope of chunk creation * Address review: fail explicitly if baseIV is empty for SSE-S3 chunk encryption If DestinationIV is not set when encrypting SSE-S3 chunks, the chunk would be created without SseMetadata, causing GetObject decryption to fail later. Now fails explicitly with a clear error message. Note: calculateIVWithOffset returns ([]byte, int) not ([]byte, error) - the int is a skip amount for intra-block alignment, not an error code. * Address review: handle 0-byte files in SSE-S3 copy For 0-byte files, there are no chunks to get metadata from. Generate an IV for the object-level metadata to ensure even empty files are properly marked as SSE-S3 encrypted. Also validate that we don't have a non-empty file with no chunks (which would indicate an internal error).	2 weeks ago
Chris Lu	099a351f3b	Fix issue #6847 : S3 chunked encoding includes headers in stored content (#7595 ) * Fix issue #6847: S3 chunked encoding includes headers in stored content - Add hasTrailer flag to s3ChunkedReader to track trailer presence - Update state transition logic to properly handle trailers in unsigned streaming - Enhance parseChunkChecksum to handle multiple trailer lines - Skip checksum verification for unsigned streaming uploads - Add test case for mixed format handling (unsigned headers with signed chunks) - Remove redundant CRLF reading in trailer processing This fixes the issue where chunk-signature and x-amz headers were appearing in stored file content when using chunked encoding with newer AWS SDKs. * Fix checksum validation for unsigned streaming uploads - Always validate checksum for data integrity regardless of signing - Correct checksum value in test case - Addresses PR review feedback about checksum verification * Add warning log when multiple checksum headers found in trailer - Log a warning when multiple valid checksum headers appear in trailers - Uses last checksum header as suggested by CodeRabbit reviewer - Improves debugging for edge cases with multiple checksum algorithms * Improve trailer parsing robustness in parseChunkChecksum - Remove redundant trimTrailingWhitespace call since readChunkLine already trims - Use bytes.TrimSpace for both key and value to handle whitespace around colon separator - Follows HTTP header specifications for optional whitespace around separators - Addresses Gemini Code Assist review feedback	2 weeks ago
chrislu	49ed42b367	Fix test stability: increase cluster stabilization delay to 5 seconds The tests were intermittently failing because the volume server needed more time to create volumes and register with the master. Increasing the delay from 2 to 5 seconds fixes the flaky test behavior.	2 weeks ago
chrislu	5e5f05607a	Address code review comments: fix variable shadowing, sniff size, and test stability - Rename path variable to reqPath to avoid shadowing path package - Make sniff buffer size respect contentLength (read at most contentLength bytes) - Handle Content-Length < 0 in creation-with-upload (return error for chunked encoding) - Fix test cluster: use temp directory for filer store, add startup delay	2 weeks ago
chrislu	b49ee25481	Fix race condition to work across multiple filer instances - Store each chunk as a separate file entry instead of updating session JSON - Chunk file names encode offset, size, and fileId for atomic storage - getTusSession loads chunks from directory listing (atomic read) - Eliminates read-modify-write race condition across multiple filers - Remove in-memory mutex that only worked for single filer instance	2 weeks ago
chrislu	870e32c4ad	Address critical and high-priority review comments - Add per-session locking to prevent race conditions in updateTusSessionOffset - Stream data directly to volume server instead of buffering entire chunk - Only buffer 512 bytes for MIME type detection, then stream remaining data - Clean up session locks when session is deleted	2 weeks ago
Chris Lu	8c585a9682	Fix S3 object tagging issue #7589 - Add X-Amz-Tagging header parsing in putToFiler function for PUT object operations - Store tags with X-Amz-Tagging- prefix in entry.Extended metadata - Add comprehensive test suite for S3 object tagging functionality - Tests cover upload tagging, API operations, special characters, and edge cases	2 weeks ago
chrislu	21d1a2d167	Address remaining code review comments - Fix potential open redirect vulnerability by sanitizing uploadLocation path - Add language specifier to README code block - Handle os.Create errors in test setup - Use waitForHTTPServer instead of time.Sleep for master/volume readiness - Improve test reliability and debugging	2 weeks ago
chrislu	35192b8bb8	fmt	2 weeks ago
chrislu	f45918c3ea	Address code review comments - Sort chunks by offset before assembling final file - Use chunk.Offset directly instead of recalculating - Return error on invalid file ID instead of skipping - Require Content-Length header for PATCH requests - Use fs.option.Cipher for encryption setting - Detect MIME type from data using http.DetectContentType - Fix concurrency group for push events in workflow - Use os.Interrupt instead of Kill for graceful shutdown in tests	2 weeks ago
chrislu	42b173fff9	Rename -tus.path to -tusBasePath with default .tus - Rename CLI flag from -tus.path to -tusBasePath - Default to .tus (TUS enabled by default) - Add -filer.tusBasePath option to weed server command - Properly handle path prefix (prepend / if missing)	2 weeks ago
Chris Lu	61c0514a1c	filer: add username and keyPrefix support for Redis stores (#7591 ) * filer: add username and keyPrefix support for Redis stores Addresses https://github.com/seaweedfs/seaweedfs/issues/7299 - Add username config option to redis2, redis_cluster2, redis_lua, and redis_lua_cluster stores (sentinel stores already had it) - Add keyPrefix config option to all Redis stores to prefix all keys, useful for Envoy Redis Proxy or multi-tenant Redis setups * refactor: reduce duplication in redis.NewClient creation Address code review feedback by defining redis.Options once and conditionally setting TLSConfig instead of duplicating the entire NewClient call. * filer.toml: add username and keyPrefix to redis2.tmp example	2 weeks ago
chrislu	31214b2874	Make TUS base path configurable via CLI - Add -tus.path CLI flag to filer command - TUS is disabled by default (empty path) - Example: -tus.path=/.tus to enable at /.tus endpoint - Update test Makefile to use -tus.path flag - Update README with TUS enabling instructions	2 weeks ago
chrislu	45b32ad0c7	Fix TUS integration tests and creation-with-upload - Fix test URLs to use full URLs instead of relative paths - Fix creation-with-upload to refresh session before completing - Fix Makefile to properly handle test cleanup - Add FullURL helper function to TestCluster	2 weeks ago
chrislu	2ff0cc80a7	Wire up TUS protocol routes in filer server Add TUS handler route (/.tus/) to the filer HTTP server. The TUS route is registered before the catch-all route to ensure proper routing of TUS protocol requests. TUS protocol is now accessible at: - OPTIONS /.tus/ - Capability discovery - POST /.tus/{path} - Create upload - HEAD /.tus/.uploads/{id} - Get offset - PATCH /.tus/.uploads/{id} - Upload data - DELETE /.tus/.uploads/{id} - Cancel upload	2 weeks ago
chrislu	44d0925d7b	Add TUS HTTP handlers Implements TUS protocol HTTP handlers: - tusHandler: Main entry point routing requests - tusOptionsHandler: Capability discovery (OPTIONS) - tusCreateHandler: Create new upload (POST) - tusHeadHandler: Get upload offset (HEAD) - tusPatchHandler: Upload data at offset (PATCH) - tusDeleteHandler: Cancel upload (DELETE) - tusWriteData: Upload data to volume servers Features: - Supports creation-with-upload extension - Validates TUS protocol headers - Offset conflict detection - Automatic upload completion when size is reached - Metadata parsing from Upload-Metadata header	2 weeks ago
chrislu	3675d9db01	Add TUS session storage types and utilities Implements TUS upload session management: - TusSession struct for tracking upload state - Session creation with directory-based storage - Session persistence using filer entries - Session retrieval and offset updates - Session deletion with chunk cleanup - Upload completion with chunk assembly into final file Session data is stored in /.uploads.tus/{upload-id}/ directory, following the pattern used by S3 multipart uploads.	2 weeks ago
Chris Lu	f6f3859826	Fix #7575 : Correct interface check for filer address function in admin server (#7588 ) * Fix #7575: Correct interface check for filer address function in admin server Problem: User creation in object store was failing with error: 'filer_etc: filer address function not configured' Root Cause: In admin_server.go, the code checked for incorrect interface method SetFilerClient(string, grpc.DialOption) instead of the actual SetFilerAddressFunc(func() pb.ServerAddress, grpc.DialOption) This interface mismatch prevented the filer address function from being configured, causing user creation operations to fail. Solution: - Fixed interface check to use SetFilerAddressFunc - Updated function call to properly configure filer address function - Function now dynamically returns current active filer address Tests Added: - Unit tests in weed/admin/dash/user_management_test.go - Integration tests in test/admin/user_creation_integration_test.go - Documentation in test/admin/README.md All tests pass successfully. * Fix #7575: Correct interface check for filer address function in admin UI Problem: User creation in Admin UI was failing with error: 'filer_etc: filer address function not configured' Root Cause: In admin_server.go, the code checked for incorrect interface method SetFilerClient(string, grpc.DialOption) instead of the actual SetFilerAddressFunc(func() pb.ServerAddress, grpc.DialOption) This interface mismatch prevented the filer address function from being configured, causing user creation operations to fail in the Admin UI. Note: This bug only affects the Admin UI. The S3 API and weed shell commands (s3.configure) were unaffected as they use the correct interface or bypass the credential manager entirely. Solution: - Fixed interface check in admin_server.go to use SetFilerAddressFunc - Updated function call to properly configure filer address function - Function now dynamically returns current active filer (HA-aware) - Cleaned up redundant comments in the code Tests Added: - Unit tests in weed/admin/dash/user_management_test.go * TestFilerAddressFunctionInterface - verifies correct interface * TestGenerateAccessKey - tests key generation * TestGenerateSecretKey - tests secret generation * TestGenerateAccountId - tests account ID generation All tests pass and will run automatically in CI. * Fix #7575: Correct interface check for filer address function in admin UI Problem: User creation in Admin UI was failing with error: 'filer_etc: filer address function not configured' Root Cause: 1. In admin_server.go, the code checked for incorrect interface method SetFilerClient(string, grpc.DialOption) instead of the actual SetFilerAddressFunc(func() pb.ServerAddress, grpc.DialOption) 2. The admin command was missing the filer_etc import, so the store was never registered This interface mismatch prevented the filer address function from being configured, causing user creation operations to fail in the Admin UI. Note: This bug only affects the Admin UI. The S3 API and weed shell commands (s3.configure) were unaffected as they use the correct interface or bypass the credential manager entirely. Solution: - Added filer_etc import to weed/command/admin.go to register the store - Fixed interface check in admin_server.go to use SetFilerAddressFunc - Updated function call to properly configure filer address function - Function now dynamically returns current active filer (HA-aware) - Hoisted credentialManager assignment to reduce code duplication Tests Added: - Unit tests in weed/admin/dash/user_management_test.go * TestFilerAddressFunctionInterface - verifies correct interface * TestGenerateAccessKey - tests key generation * TestGenerateSecretKey - tests secret generation * TestGenerateAccountId - tests account ID generation All tests pass and will run automatically in CI.	2 weeks ago
Lisandro Pin	36dd59560b	Have `volume.check.disk` select a random (heathly) source volume when… (#7574 ) Have `volume.check.disk` select a random (heathly) source volume when repairing read-only volumes. This ensures uniform load across the topology when the command is run. Also remove a lingering TODO about ignoring full volumes; not only there's no way to discern read-only volumes from being full vs. being damaged, we ultimately want to check the former anyway.	2 weeks ago
Krzysztof Osiniak	5461f85240	Update README and weed/Makefile (#7571 ) * Add link to wiki installation page in README * Add building for docker in weed/Makefile Building without `CGO_ENABLED=0` and using the executable in docker can result in a docker container exiting with an error * Update README.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Add GOOS=linux to build_docker target for cross-compilation --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> Co-authored-by: Chris Lu <chris.lu@gmail.com>	2 weeks ago
Chris Lu	d48e1e1659	mount: improve read throughput with parallel chunk fetching (#7569 ) * mount: improve read throughput with parallel chunk fetching This addresses issue #7504 where a single weed mount FUSE instance does not fully utilize node network bandwidth when reading large files. Changes: - Add -concurrentReaders mount option (default: 16) to control the maximum number of parallel chunk fetches during read operations - Implement parallel section reading in ChunkGroup.ReadDataAt() using errgroup for better throughput when reading across multiple sections - Enhance ReaderCache with MaybeCacheMany() to prefetch multiple chunks ahead in parallel during sequential reads (now prefetches 4 chunks) - Increase ReaderCache limit dynamically based on concurrentReaders to support higher read parallelism The bottleneck was that chunks were being read sequentially even when they reside on different volume servers. By introducing parallel chunk fetching, a single mount instance can now better saturate available network bandwidth. Fixes: #7504 * fmt * Address review comments: make prefetch configurable, improve error handling Changes: 1. Add DefaultPrefetchCount constant (4) to reader_at.go 2. Add GetPrefetchCount() method to ChunkGroup that derives prefetch count from concurrentReaders (1/4 ratio, min 1, max 8) 3. Pass prefetch count through NewChunkReaderAtFromClient 4. Fix error handling in readDataAtParallel to prioritize errgroup error 5. Update all callers to use DefaultPrefetchCount constant For mount operations, prefetch scales with -concurrentReaders: - concurrentReaders=16 (default) -> prefetch=4 - concurrentReaders=32 -> prefetch=8 (capped) - concurrentReaders=4 -> prefetch=1 For non-mount paths (WebDAV, query engine, MQ), uses DefaultPrefetchCount. * fmt * Refactor: use variadic parameter instead of new function name Use NewChunkGroup with optional concurrentReaders parameter instead of creating a separate NewChunkGroupWithConcurrency function. This maintains backward compatibility - existing callers without the parameter get the default of 16 concurrent readers. * Use explicit concurrentReaders parameter instead of variadic * Refactor: use MaybeCache with count parameter instead of new MaybeCacheMany function * Address nitpick review comments - Add upper bound (128) on concurrentReaders to prevent excessive goroutine fan-out - Cap readerCacheLimit at 256 accordingly - Fix SetChunks: use Lock() instead of RLock() since we are writing to group.sections	2 weeks ago
Chris Lu	bd419fda51	fix: copy to bucket with default SSE-S3 encryption fails (#7562 ) (#7568 ) * filer use context without cancellation * pass along context * fix: copy to bucket with default SSE-S3 encryption fails (#7562) When copying an object from an encrypted bucket to a temporary unencrypted bucket, then to another bucket with default SSE-S3 encryption, the operation fails with 'invalid SSE-S3 source key type' error. Root cause: When objects are copied from an SSE-S3 encrypted bucket to an unencrypted bucket, the 'X-Amz-Server-Side-Encryption: AES256' header is preserved but the actual encryption key (SeaweedFSSSES3Key) is stripped. This creates an 'orphaned' SSE-S3 header that causes IsSSES3EncryptedInternal() to return true, triggering decryption logic with a nil key. Fix: 1. Modified IsSSES3EncryptedInternal() to require BOTH the AES256 header AND the SeaweedFSSSES3Key to be present before returning true 2. Added isOrphanedSSES3Header() to detect orphaned SSE-S3 headers 3. Updated copy handler to strip orphaned headers during copy operations Fixes #7562 * fmt * refactor: simplify isOrphanedSSES3Header function logic Remove redundant existence check since the caller iterates through metadata map, making the check unnecessary. Improves readability while maintaining the same functionality.	2 weeks ago
Chris Lu	7e4bab8032	filer write request use context without cancellation (#7567 ) * filer use context without cancellation * pass along context	2 weeks ago
Chris Lu	03ce060e85	fix too many pings (#7566 ) * fix too many pings * constants * Update weed/pb/grpc_client_server.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	2 weeks ago

1 2 3 4 5 ...

7778 Commits (657e3875fde334a280459a600a746be5abfd22b1)