Reverted the conditional versioning check to always check versioning status
Reverted the conditional SSE entry fetch to always fetch entry metadata
Reverted the conditional versioning check to always check versioning status
Reverted the conditional SSE entry fetch to always fetch entry metadata
* refactor to avoids circular dependency
* converts a policy.PolicyDocument to policy_engine.PolicyDocument
* convert numeric types to strings
* Update weed/s3api/policy_conversion.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* refactoring
* not skipping numeric and boolean values in arrays
* avoid nil
* edge cases
* handling conversion failure
The handling of unsupported types in convertToString could lead to silent policy alterations.
The conversion of map-based principals in convertPrincipal is too generic and could misinterpret policies.
* concise
* fix doc
* adjust warning
* recursion
* return errors
* reject empty principals
* better error message
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* evaluate policies during authorization
* cache bucket policy
* refactor
* matching with regex special characters
* Case Sensitivity, pattern cache, Dead Code Removal
* Fixed Typo, Restored []string Case, Added Cache Size Limit
* hook up with policy engine
* remove old implementation
* action mapping
* validate
* if not specified, fall through to IAM checks
* fmt
* Fail-close on policy evaluation errors
* Explicit `Allow` bypasses IAM checks
* fix error message
* arn:seaweed => arn:aws
* remove legacy support
* fix tests
* Clean up bucket policy after this test
* fix for tests
* address comments
* security fixes
* fix tests
* temp comment out
* do delete expired entries on s3 list request
https://github.com/seaweedfs/seaweedfs/issues/6837
* disable delete expires s3 entry in filer
* pass opt allowDeleteObjectsByTTL to all servers
* delete on get and head
* add lifecycle expiration s3 tests
* fix opt allowDeleteObjectsByTTL for server
* fix test lifecycle expiration
* fix IsExpired
* fix locationPrefix for updateEntriesTTL
* fix s3tests
* resolv coderabbitai
* GetS3ExpireTime on filer
* go mod
* clear TtlSeconds for volume
* move s3 delete expired entry to filer
* filer delete meta and data
* del unusing func removeExpiredObject
* test s3 put
* test s3 put multipart
* allowDeleteObjectsByTTL by default
* fix pipline tests
* rm dublicate SeaweedFSExpiresS3
* revert expiration tests
* fix updateTTL
* rm log
* resolv comment
* fix delete version object
* fix S3Versioning
* fix delete on FindEntry
* fix delete chunks
* fix sqlite not support concurrent writes/reads
* move deletion out of listing transaction; delete entries and empty folders
* Revert "fix sqlite not support concurrent writes/reads"
This reverts commit 5d5da14e0e.
* clearer handling on recursive empty directory deletion
* handle listing errors
* strut copying
* reuse code to delete empty folders
* use iterative approach with a queue to avoid recursive WithFilerClient calls
* stop a gRPC stream from the client-side callback is to return a specific error, e.g., io.EOF
* still issue UpdateEntry when the flag must be added
* errors join
* join path
* cleaner
* add context, sort directories by depth (deepest first) to avoid redundant checks
* batched operation, refactoring
* prevent deleting bucket
* constant
* reuse code
* more logging
* refactoring
* s3 TTL time
* Safety check
---------
Co-authored-by: chrislu <chris.lu@gmail.com>
* Added continue statements after all state transitions in the state machine to ensure immediate state processing
* simplify
* remove redundant continue clause
* ensure wrong signature
* Add nginx reverse proxy documentation for S3 API
Fixes#7407
Add comprehensive documentation and example configuration for using
nginx as a reverse proxy with SeaweedFS S3 API while maintaining AWS
Signature V4 authentication compatibility.
Changes:
- Add docker/nginx/README.md with detailed setup guide
- Add docker/nginx/s3-example.conf with working configuration
- Update docker/nginx/proxy.conf with important S3 notes
The documentation covers:
- Critical requirements for AWS Signature V4 authentication
- Common mistakes and why they break S3 authentication
- Complete working nginx configurations
- Debugging tips and troubleshooting
- Performance tuning recommendations
* Fix IPv6 host header formatting to match AWS SDK behavior
Follow-up to PR #7403
When a default port (80 for HTTP, 443 for HTTPS) is stripped from an
IPv6 address, the square brackets should also be removed to match AWS
SDK behavior for S3 signature calculation.
Reference: https://github.com/aws/aws-sdk-go-v2/blob/main/aws/signer/internal/v4/host.go
The AWS SDK's stripPort function explicitly removes brackets when
returning an IPv6 address without a port.
Changes:
- Update extractHostHeader to strip brackets from IPv6 addresses when
no port or default port is used
- Update test expectations to match AWS SDK behavior
- Add detailed comments explaining the AWS SDK compatibility requirement
This ensures S3 signature validation works correctly with IPv6 addresses
behind reverse proxies, matching AWS S3 canonical request format.
Fixes the issue raised in PR #7403 comment:
https://github.com/seaweedfs/seaweedfs/pull/7403#issuecomment-3471105438
* Update docker/nginx/README.md
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* Add nginx reverse proxy documentation for S3 API
Fixes#7407
Add comprehensive documentation and example configuration for using
nginx as a reverse proxy with SeaweedFS S3 API while maintaining AWS
Signature V4 authentication compatibility.
Changes:
- Add docker/nginx/README.md with detailed setup guide
- Add docker/nginx/s3-example.conf with working configuration
- Update docker/nginx/proxy.conf with important S3 notes
The documentation covers:
- Critical requirements for AWS Signature V4 authentication
- Common mistakes and why they break S3 authentication
- Complete working nginx configurations
- Debugging tips and troubleshooting
- Performance tuning recommendations
Fix IPv6 host header formatting to match AWS SDK behavior
Follow-up to PR #7403
When a default port (80 for HTTP, 443 for HTTPS) is stripped from an
IPv6 address, the square brackets should also be removed to match AWS
SDK behavior for S3 signature calculation.
Reference: https://github.com/aws/aws-sdk-go-v2/blob/main/aws/signer/internal/v4/host.go
The AWS SDK's stripPort function explicitly removes brackets when
returning an IPv6 address without a port.
Changes:
- Update extractHostHeader to strip brackets from IPv6 addresses when
no port or default port is used
- Update test expectations to match AWS SDK behavior
- Add detailed comments explaining the AWS SDK compatibility requirement
This ensures S3 signature validation works correctly with IPv6 addresses
behind reverse proxies, matching AWS S3 canonical request format.
Fixes the issue raised in PR #7403 comment:
https://github.com/seaweedfs/seaweedfs/pull/7403#issuecomment-3471105438
* Revert "Merge branch 'fix-ipv6-brackets-default-port' of https://github.com/seaweedfs/seaweedfs into fix-ipv6-brackets-default-port"
This reverts commit cca3f3985f, reversing
changes made to 2b8f9de78e.
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* Fix S3 bucket policy ARN validation to accept AWS ARNs and simplified formats
Fixes#7252
The bucket policy validation was rejecting valid AWS-style ARNs and
simplified resource formats, causing validation failures with the
error 'resource X does not match bucket X' even when they were
identical strings.
Changes:
- Updated validateResourceForBucket() to accept three formats:
1. AWS-style ARNs: arn:aws:s3:::bucket-name[/*|/path]
2. SeaweedFS ARNs: arn:seaweed:s3:::bucket-name[/*|/path]
3. Simplified formats: bucket-name[/*|/path]
- Added comprehensive test coverage for all three formats
- Added specific test cases from issue #7252 to prevent regression
This ensures compatibility with standard AWS S3 bucket policies
while maintaining support for SeaweedFS-specific ARN format.
* Refactor validateResourceForBucket to reduce code duplication
Simplified the validation logic by stripping ARN prefixes first,
then performing validation on the remaining resource path.
This reduces code duplication and improves maintainability while
maintaining identical functionality.
Addresses review feedback from Gemini Code Assist.
* Use strings.CutPrefix for cleaner ARN prefix stripping
Replace strings.HasPrefix checks with strings.CutPrefix for more
idiomatic Go code. This function is available in Go 1.20+ and
provides cleaner conditional logic with the combined check and
extraction.
Addresses review feedback from Gemini Code Assist.
* * Fix s3 auth with proxy request
* * 6649 Add unit test for signature v4
* address comments
* fix for tests
* ipv6
* address comments
* setting scheme
Works for both cases (direct HTTPS and behind proxy)
* trim for ipv6
* Corrected Scheme Precedence Order
* trim
* accurate
---------
Co-authored-by: chrislu <chris.lu@gmail.com>
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
* add fallback for cors
* refactor
* expose aws headers
* add fallback to test
* refactor
* Only falls back to global config when there's explicitly no bucket-level config.
* fmt
* Update s3_cors_http_test.go
* refactoring
* s3: fix if-match error
* add more checks
* minor
* minor
---------
Co-authored-by: chrislu <chris.lu@gmail.com>
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
* IAM: add support for advanced IAM config file to server command
* Add support for advanced IAM config file in S3 options
* Fix S3 IAM config handling to simplify checks for configuration presence
* simplify
* simplify again
* copy the value
* const
---------
Co-authored-by: chrislu <chris.lu@gmail.com>
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
chrislu
Chris Lu
Konstantin Lebedev
zuzuviewer
Taehyung Lim
Nial