Mirror/seaweedfs - seaweedfs - Gitea: Git with a cup of tea

Author	SHA1	Message	Date
Chris Lu	5a03b5538f	filer: improve FoundationDB performance by disabling batch by default (#7770 ) * filer: improve FoundationDB performance by disabling batch by default This PR addresses a performance issue where FoundationDB filer was achieving only ~757 ops/sec with 12 concurrent S3 clients, despite FDB being capable of 17,000+ ops/sec. Root cause: The write batcher was waiting up to 5ms for each operation to batch, even though S3 semantics require waiting for durability confirmation. This added artificial latency that defeated the purpose of batching. Changes: - Disable write batching by default (batch_enabled = false) - Each write now commits immediately in its own transaction - Reduce batch interval from 5ms to 1ms when batching is enabled - Add batch_enabled config option to toggle behavior - Improve batcher to collect available ops without blocking - Add benchmarks comparing batch vs no-batch performance Benchmark results (16 concurrent goroutines): - With batch: 2,924 ops/sec (342,032 ns/op) - Without batch: 4,625 ops/sec (216,219 ns/op) - Improvement: +58% faster Configuration: - Default: batch_enabled = false (optimal for S3 PUT latency) - For bulk ingestion: set batch_enabled = true Also fixes ARM64 Docker test setup (shell compatibility, fdbserver path). * fix: address review comments - use atomic counter and remove duplicate batcher - Use sync/atomic.Uint64 for unique filenames in concurrent benchmarks - Remove duplicate batcher creation in createBenchmarkStoreWithBatching (initialize() already creates batcher when batchEnabled=true) * fix: add realistic default values to benchmark store helper Set directoryPrefix, timeout, and maxRetryDelay to reasonable defaults for more realistic benchmark conditions.	2 months ago
Chris Lu	e8b7347031	Reduce memory allocations in hot paths (#7725 ) * filer: reduce allocations in MatchStorageRule Optimize MatchStorageRule to avoid allocations in common cases: - Return singleton emptyPathConf when no rules match (zero allocations) - Return existing rule directly when only one rule matches (zero allocations) - Only allocate and merge when multiple rules match (rare case) Based on heap profile analysis showing 111MB allocated from 1.64M calls to this function during 180 seconds of operation. * filer: add fast path for getActualStore when no path-specific stores Add hasPathSpecificStore flag to FilerStoreWrapper to skip the MatchPrefix() call and []byte(path) conversion when no path-specific stores are configured (the common case). Based on heap profile analysis showing 1.39M calls to this function during 180 seconds of operation, each requiring a string-to-byte slice conversion for the MatchPrefix call. * filer/foundationdb: use sync.Pool for tuple allocation in genKey Use sync.Pool to reuse tuple.Tuple slices in genKey(), reducing allocation overhead for every FoundationDB operation. Based on heap profile analysis showing 102MB allocated from 1.79M calls to genKey() during 180 seconds of operation. The Pack() call still allocates internally, but this reduces the tuple slice allocation overhead by ~50%. * filer: use sync.Pool for protobuf Entry and FuseAttributes Add pooling for filer_pb.Entry and filer_pb.FuseAttributes in EncodeAttributesAndChunks and DecodeAttributesAndChunks to reduce allocations during filer store operations. Changes: - Add pbEntryPool with pre-allocated FuseAttributes - Add EntryAttributeToExistingPb for in-place attribute conversion - Update ToExistingProtoEntry to reuse existing Attributes when available Based on heap profile showing: - EncodeAttributesAndChunks: 69.5MB cumulative - DecodeAttributesAndChunks: 46.5MB cumulative - EntryAttributeToPb: 47.5MB flat allocations * log_buffer: use sync.Pool for LogEntry in readTs Add logEntryPool to reuse filer_pb.LogEntry objects in readTs(), which is called frequently during binary search in ReadFromBuffer. This function only needs the TsNs field from the unmarshaled entry, so pooling the LogEntry avoids repeated allocations. Based on heap profile showing readTs with 188MB cumulative allocations from timestamp lookups during log buffer reads. * pb: reduce gRPC metadata allocations in interceptor Optimize requestIDUnaryInterceptor and WithGrpcClient to reduce metadata allocations on every gRPC request: - Use AppendToOutgoingContext instead of NewOutgoingContext + New() This avoids creating a new map[string]string for single key-value pairs - Check FromIncomingContext return value before using metadata Based on heap profile showing metadata operations contributing 0.45GB (10.5%) of allocations, with requestIDUnaryInterceptor being the main source at 0.44GB cumulative. Expected reduction: ~0.2GB from avoiding map allocations per request. * filer/log_buffer: address code review feedback - Use proto.Reset() instead of manual field clearing in resetLogEntry for more idiomatic and comprehensive state clearing - Add resetPbEntry() call before pool return in error path for consistency with success path in DecodeAttributesAndChunks * log_buffer: reduce PreviousBufferCount from 32 to 4 Reduce the number of retained previous buffers from 32 to 4. Each buffer is 8MB, so this reduces the maximum retained memory from 256MB to 32MB for previous buffers. Most subscribers catch up quickly, so 4 buffers (32MB) should be sufficient while significantly reducing memory footprint. * filer/foundationdb: use defer for tuple pool cleanup in genKey Refactor genKey to use defer for returning the pooled tuple. This ensures the pooled object is always returned even if store.seaweedfsDir.Pack panics, making the code more robust. Also simplifies the code by removing the temporary variable. * filer: early-stop MatchStorageRule prescan after 2 matches Stop the prescan callback after finding 2 matches since we only need to know if there are 0, 1, or multiple matches. This avoids unnecessarily scanning the rest of the trie when many rules exist. * fix: address critical code review issues filer_conf.go: - Remove mutable singleton emptyPathConf that could corrupt shared state - Return fresh copy for no-match case and cloned copy for single-match case - Add clonePathConf helper to create shallow copies safely grpc_client_server.go: - Remove incorrect AppendToOutgoingContext call in server interceptor (that API is for outbound client calls, not server-side handlers) - Rely on request_id.Set and SetTrailer for request ID propagation * fix: treat FilerConf_PathConf as immutable Fix callers that were incorrectly mutating the returned PathConf: - filer_server_handlers_write.go: Use local variable for MaxFileNameLength instead of mutating the shared rule - command_s3_bucket_quota_check.go: Create new PathConf explicitly when modifying config instead of mutating the returned one This allows MatchStorageRule to safely return the singleton or direct references without copying, restoring the memory optimization. Callers must NOT mutate the returned FilerConf_PathConf. filer: add ClonePathConf helper for creating mutable copies Add reusable ClonePathConf function that creates a mutable copy of a PathConf. This is useful when callers need to modify config before calling SetLocationConf. Update command_s3_bucket_quota_check.go to use the new helper. Also fix redundant return statement in DeleteLocationConf. * fmt * filer: fix protobuf pool reset to clear internal fields Address code review feedback: 1. resetPbEntry/resetFuseAttributes: Use struct assignment (e = T{}) instead of field-by-field reset to clear protobuf internal fields (unknownFields, sizeCache) that would otherwise accumulate across pool reuses, causing data corruption or memory bloat. 2. EntryAttributeToExistingPb: Add nil guard for attr parameter to prevent panic if caller passes nil. log_buffer: reset logEntry before pool return in error path For consistency with success path, reset the logEntry before putting it back in the pool in the error path. This prevents the pooled object from holding references to partially unmarshaled data. * filer: optimize MatchStorageRule and document ClonePathConf 1. Avoid double []byte(path) conversion in multi-match case by converting once and reusing pathBytes. 2. Add IMPORTANT comment to ClonePathConf documenting that it must be kept in sync with filer_pb.FilerConf_PathConf fields when the protobuf evolves. * filer/log_buffer: fix data race and use defer for pool cleanup 1. entry_codec.go EncodeAttributesAndChunks: Fix critical data race - proto.Marshal may return a slice sharing memory with the message. Copy the data before returning message to pool to prevent corruption. 2. entry_codec.go DecodeAttributesAndChunks: Use defer for cleaner pool management, ensuring message is always returned to pool. 3. log_buffer.go readTs: Use defer for pool cleanup, removing duplicated resetLogEntry/Put calls in success and error paths. * filer: fix ClonePathConf field order and add comprehensive test 1. Fix field order in ClonePathConf to match protobuf struct definition (WormGracePeriodSeconds before WormRetentionTimeSeconds). 2. Add TestClonePathConf that constructs a fully-populated PathConf, calls ClonePathConf, and asserts equality of all exported fields. This will catch future schema drift when new fields are added. 3. Add TestClonePathConfNil to verify nil handling. * filer: use reflection in ClonePathConf test to detect schema drift Replace hardcoded field comparisons with reflection-based comparison. This automatically catches: 1. New fields added to the protobuf but not copied in ClonePathConf 2. Missing non-zero test values for any exported field The test iterates over all exported fields using reflect and compares src vs clone values, failing if any field differs. * filer: update EntryAttributeToExistingPb comment to reflect nil handling The function safely handles nil attr by returning early, but the comment incorrectly stated 'attr must not be nil'. Update comment to accurately describe the defensive behavior. * Fix review feedback: restore request ID propagation and remove redundant resets 1. grpc_client_server.go: Restore AppendToOutgoingContext for request ID so handlers making downstream gRPC calls will automatically propagate the request ID to downstream services. 2. entry_codec.go: Remove redundant resetPbEntry calls after Get. The defer block ensures reset before Put, so next Get receives clean object. 3. log_buffer.go: Remove redundant resetLogEntry call after Get for same reason - defer already handles reset before Put.	2 months ago
Chris Lu	c153420022	filer: add write batching for FoundationDB store to improve throughput (#7708 ) This addresses issue #7699 where FoundationDB filer store had low throughput (~400-500 obj/s) due to each write operation creating a separate transaction. Changes: - Add writeBatcher that collects multiple writes into batched transactions - New config options: batch_size (default: 100), batch_interval (default: 5ms) - Batching provides ~5.7x throughput improvement (from ~456 to ~2600 obj/s) Benchmark results with different batch sizes: - batch_size=1: ~456 obj/s (baseline, no batching) - batch_size=10: ~2621 obj/s (5.7x improvement) - batch_size=16: ~2514 obj/s (5.5x improvement) - batch_size=100: ~2617 obj/s (5.7x improvement) - batch_size=1000: ~2593 obj/s (5.7x improvement) The batch_interval timer (5ms) ensures writes are flushed promptly even when batch is not full, providing good latency characteristics. Addressed review feedback: - Changed wait=false to wait=true in UpdateEntry/DeleteEntry to properly propagate errors to callers - Fixed timer reset race condition by stopping and draining before reset Fixes #7699	2 months ago
tam-i13	b669607fcd	Add error list each entry func (#7485 ) * added error return in type ListEachEntryFunc * return error if errClose * fix fmt.Errorf * fix return errClose * use %w fmt.Errorf * added entry in messege error * add callbackErr in ListDirectoryEntries * fix error * add log * clear err when the scanner stops on io.EOF, so returning err doesn’t surface EOF as a failure. * more info in error * add ctx to logs, error handling * fix return eachEntryFunc * fix * fix log * fix return * fix foundationdb test s * fix eachEntryFunc * fix return resEachEntryFuncErr * Update weed/filer/filer.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update weed/filer/elastic/v7/elastic_store.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update weed/filer/hbase/hbase_store.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update weed/filer/foundationdb/foundationdb_store.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update weed/filer/ydb/ydb_store.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * fix * add scanErr --------- Co-authored-by: Roman Tamarov <r.tamarov@kryptonite.ru> Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com> Co-authored-by: chrislu <chris.lu@gmail.com> Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>	3 months ago
Chris Lu	c6b6ea40e6	filer store: add foundationdb (#7178 ) * add foundationdb * Update foundationdb_store.go * fix * apply the patch * avoid panic on error * address comments * remove extra data * address comments * adds more debug messages * fix range listing * delete with prefix range; list with right start key * fix docker files * use the more idiomatic FoundationDB KeySelectors * address comments * proper errors * fix API versions * more efficient * recursive deletion * clean up * clean up * pagination, one transaction for deletion * error checking * Use fdb.Strinc() to compute the lexicographically next string and create a proper range * fix docker * Update README.md * delete in batches * delete in batches * fix build * add foundationdb build * Updated FoundationDB Version * Fixed glibc/musl Incompatibility (Alpine → Debian) * Update container_foundationdb_version.yml * build SeaweedFS * build tag * address comments * separate transaction * address comments * fix build * empty vs no data * fixes * add go test * Install FoundationDB client libraries * nil compare	3 months ago