 FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago |
|
# Put this file to one of the location, with descending priority# ./security.toml# $HOME/.seaweedfs/security.toml# /etc/seaweedfs/security.toml# this file is read by master, volume server, and filer
# this jwt signing key is read by master and volume server, and it is used for write operations:# - the Master server generates the JWT, which can be used to write a certain file on a volume server# - the Volume server validates the JWT on writing# the jwt defaults to expire after 10 seconds.[jwt.signing]key = ""expires_after_seconds = 10 # seconds
# by default, if the signing key above is set, the Volume UI over HTTP is disabled.# by setting ui.access to true, you can re-enable the Volume UI. Despite# some information leakage (as the UI is not authenticated), this should not# pose a security risk.[access]ui = false
# this jwt signing key is read by master and volume server, and it is used for read operations:# - the Master server generates the JWT, which can be used to read a certain file on a volume server# - the Volume server validates the JWT on reading# NOTE: jwt for read is only supported with master+volume setup. Filer does not support this mode.[jwt.signing.read]key = ""expires_after_seconds = 10 # seconds
# If this JWT key is configured, Filer only accepts writes over HTTP if they are signed with this JWT:# - f.e. the S3 API Shim generates the JWT# - the Filer server validates the JWT on writing# the jwt defaults to expire after 10 seconds.[jwt.filer_signing]key = ""expires_after_seconds = 10 # seconds
# If this JWT key is configured, Filer only accepts reads over HTTP if they are signed with this JWT:# - f.e. the S3 API Shim generates the JWT# - the Filer server validates the JWT on writing# the jwt defaults to expire after 10 seconds.[jwt.filer_signing.read]key = ""expires_after_seconds = 10 # seconds
# all grpc tls authentications are mutual# the values for the following ca, cert, and key are paths to the PERM files.# the host name is not checked, so the PERM files can be shared.[grpc]ca = ""# Set wildcard domain for enable TLS authentication by common namesallowed_wildcard_domain = "" # .mycompany.com
[grpc.volume]cert = ""key = ""allowed_commonNames = "" # comma-separated SSL certificate common names
[grpc.master]cert = ""key = ""allowed_commonNames = "" # comma-separated SSL certificate common names
[grpc.filer]cert = ""key = ""allowed_commonNames = "" # comma-separated SSL certificate common names
[grpc.msg_broker]cert = ""key = ""allowed_commonNames = "" # comma-separated SSL certificate common names
# use this for any place needs a grpc client# i.e., "weed backup|benchmark|filer.copy|filer.replicate|mount|s3|upload"[grpc.client]cert = ""key = ""
# volume server https options# Note: work in progress!# this does not work with other clients, e.g., "weed filer|mount" etc, yet.[https.client]enabled = true
[https.volume]cert = ""key = ""ca = ""
[https.master]cert = ""key = ""ca = ""
|
