FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago FEATURE: add JWT to HTTP endpoints of Filer and use them in S3 Client
- one JWT for reading and one for writing, analogous to how the JWT
between Master and Volume Server works
- I did not implement IP `whiteList` parameter on the filer
Additionally, because http_util.DownloadFile now sets the JWT,
the `download` command should now work when `jwt.signing.read` is
configured. By looking at the code, I think this case did not work
before.
## Docs to be adjusted after a release
Page `Amazon-S3-API`:
```
# Authentication with Filer
You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as
explained in [Security-Configuration](Security-Configuration) -
controlled by the `grpc.*` configuration in `security.toml`.
Starting with version XX, it is also possible to authenticate the HTTP
operations between the S3-API-Proxy and the Filer (especially
uploading new files). This is configured by setting
`filer_jwt.signing.key` and `filer_jwt.signing.read.key` in
`security.toml`.
With both configurations (gRPC and JWT), it is possible to have Filer
and S3 communicate in fully authenticated fashion; so Filer will reject
any unauthenticated communication.
```
Page `Security Overview`:
```
The following items are not covered, yet:
- master server http REST services
Starting with version XX, the Filer HTTP REST services can be secured
with a JWT, by setting `filer_jwt.signing.key` and
`filer_jwt.signing.read.key` in `security.toml`.
...
Before version XX: "weed filer -disableHttp", disable http operations, only gRPC operations are allowed. This works with "weed mount" by FUSE. It does **not work** with the [S3 Gateway](Amazon S3 API), as this does HTTP calls to the Filer.
Starting with version XX: secured by JWT, by setting `filer_jwt.signing.key` and `filer_jwt.signing.read.key` in `security.toml`. **This now works with the [S3 Gateway](Amazon S3 API).**
...
# Securing Filer HTTP with JWT
To enable JWT-based access control for the Filer,
1. generate `security.toml` file by `weed scaffold -config=security`
2. set `filer_jwt.signing.key` to a secret string - and optionally filer_jwt.signing.read.key` as well to a secret string
3. copy the same `security.toml` file to the filers and all S3 proxies.
If `filer_jwt.signing.key` is configured: When sending upload/update/delete HTTP operations to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.key`.
If `filer_jwt.signing.read.key` is configured: When sending GET or HEAD requests to a filer server, the request header `Authorization` should be the JWT string (`Authorization: Bearer [JwtToken]`). The operation is authorized after the filer validates the JWT with `filer_jwt.signing.read.key`.
The S3 API Gateway reads the above JWT keys and sends authenticated
HTTP requests to the filer.
```
Page `Security Configuration`:
```
(update scaffold file)
...
[filer_jwt.signing]
key = "blahblahblahblah"
[filer_jwt.signing.read]
key = "blahblahblahblah"
```
Resolves: #158
3 years ago |
|
package weed_server
import ( "context" "errors" "net/http" "os" "strconv" "strings" "sync/atomic" "time"
"github.com/seaweedfs/seaweedfs/weed/filer" "github.com/seaweedfs/seaweedfs/weed/glog" "github.com/seaweedfs/seaweedfs/weed/pb/filer_pb" "github.com/seaweedfs/seaweedfs/weed/security" "github.com/seaweedfs/seaweedfs/weed/util"
"github.com/seaweedfs/seaweedfs/weed/stats" )
func (fs *FilerServer) filerHandler(w http.ResponseWriter, r *http.Request) { start := time.Now()
inFlightGauge := stats.FilerInFlightRequestsGauge.WithLabelValues(r.Method) inFlightGauge.Inc() defer inFlightGauge.Dec()
statusRecorder := stats.NewStatusResponseWriter(w) w = statusRecorder origin := r.Header.Get("Origin") if origin != "" { if fs.option.AllowedOrigins == nil || len(fs.option.AllowedOrigins) == 0 || fs.option.AllowedOrigins[0] == "*" { origin = "*" } else { originFound := false for _, allowedOrigin := range fs.option.AllowedOrigins { if origin == allowedOrigin { originFound = true } } if !originFound { writeJsonError(w, r, http.StatusForbidden, errors.New("origin not allowed")) return } }
w.Header().Set("Access-Control-Allow-Origin", origin) w.Header().Set("Access-Control-Expose-Headers", "*") w.Header().Set("Access-Control-Allow-Headers", "*") w.Header().Set("Access-Control-Allow-Credentials", "true") w.Header().Set("Access-Control-Allow-Methods", "PUT, POST, GET, DELETE, OPTIONS") }
if r.Method == http.MethodOptions { OptionsHandler(w, r, false) return }
// proxy to volume servers
var fileId string if strings.HasPrefix(r.RequestURI, "/?proxyChunkId=") { fileId = r.RequestURI[len("/?proxyChunkId="):] } if fileId != "" { fs.proxyToVolumeServer(w, r, fileId) stats.FilerHandlerCounter.WithLabelValues(stats.ChunkProxy).Inc() stats.FilerRequestHistogram.WithLabelValues(stats.ChunkProxy).Observe(time.Since(start).Seconds()) return } requestMethod := r.Method defer func(method *string) { stats.FilerRequestCounter.WithLabelValues(*method, strconv.Itoa(statusRecorder.Status)).Inc() stats.FilerRequestHistogram.WithLabelValues(*method).Observe(time.Since(start).Seconds()) }(&requestMethod)
isReadHttpCall := r.Method == http.MethodGet || r.Method == http.MethodHead if !fs.maybeCheckJwtAuthorization(r, !isReadHttpCall) { writeJsonError(w, r, http.StatusUnauthorized, errors.New("wrong jwt")) return }
w.Header().Set("Server", "SeaweedFS "+util.VERSION)
switch r.Method { case http.MethodGet, http.MethodHead: fs.GetOrHeadHandler(w, r) case http.MethodDelete: if _, ok := r.URL.Query()["tagging"]; ok { fs.DeleteTaggingHandler(w, r) } else { fs.DeleteHandler(w, r) } case http.MethodPost, http.MethodPut: // wait until in flight data is less than the limit
contentLength := getContentLength(r) fs.inFlightDataLimitCond.L.Lock() inFlightDataSize := atomic.LoadInt64(&fs.inFlightDataSize) for fs.option.ConcurrentUploadLimit != 0 && inFlightDataSize > fs.option.ConcurrentUploadLimit { glog.V(4).Infof("wait because inflight data %d > %d", inFlightDataSize, fs.option.ConcurrentUploadLimit) fs.inFlightDataLimitCond.Wait() inFlightDataSize = atomic.LoadInt64(&fs.inFlightDataSize) } fs.inFlightDataLimitCond.L.Unlock() atomic.AddInt64(&fs.inFlightDataSize, contentLength) defer func() { atomic.AddInt64(&fs.inFlightDataSize, -contentLength) fs.inFlightDataLimitCond.Signal() }()
if r.Method == http.MethodPut { if _, ok := r.URL.Query()["tagging"]; ok { fs.PutTaggingHandler(w, r) } else { fs.PostHandler(w, r, contentLength) } } else { // method == "POST"
fs.PostHandler(w, r, contentLength) } default: requestMethod = "INVALID" w.WriteHeader(http.StatusMethodNotAllowed) } }
func (fs *FilerServer) readonlyFilerHandler(w http.ResponseWriter, r *http.Request) {
start := time.Now() statusRecorder := stats.NewStatusResponseWriter(w) w = statusRecorder
os.Stdout.WriteString("Request: " + r.Method + " " + r.URL.String() + "\n")
origin := r.Header.Get("Origin") if origin != "" { if fs.option.AllowedOrigins == nil || len(fs.option.AllowedOrigins) == 0 || fs.option.AllowedOrigins[0] == "*" { origin = "*" } else { originFound := false for _, allowedOrigin := range fs.option.AllowedOrigins { if origin == allowedOrigin { originFound = true } } if !originFound { writeJsonError(w, r, http.StatusForbidden, errors.New("origin not allowed")) return } }
w.Header().Set("Access-Control-Allow-Origin", origin) w.Header().Set("Access-Control-Allow-Headers", "OPTIONS, GET, HEAD") w.Header().Set("Access-Control-Allow-Credentials", "true") } requestMethod := r.Method defer func(method *string) { stats.FilerRequestCounter.WithLabelValues(*method, strconv.Itoa(statusRecorder.Status)).Inc() stats.FilerRequestHistogram.WithLabelValues(*method).Observe(time.Since(start).Seconds()) }(&requestMethod) // We handle OPTIONS first because it never should be authenticated
if r.Method == http.MethodOptions { OptionsHandler(w, r, true) return }
if !fs.maybeCheckJwtAuthorization(r, false) { writeJsonError(w, r, http.StatusUnauthorized, errors.New("wrong jwt")) return }
w.Header().Set("Server", "SeaweedFS "+util.VERSION)
switch r.Method { case http.MethodGet, http.MethodHead: fs.GetOrHeadHandler(w, r) default: requestMethod = "INVALID" w.WriteHeader(http.StatusMethodNotAllowed) } }
func OptionsHandler(w http.ResponseWriter, r *http.Request, isReadOnly bool) { if isReadOnly { w.Header().Set("Access-Control-Allow-Methods", "GET, OPTIONS") } else { w.Header().Set("Access-Control-Allow-Methods", "PUT, POST, GET, DELETE, OPTIONS") w.Header().Set("Access-Control-Expose-Headers", "*") } w.Header().Set("Access-Control-Allow-Headers", "*") w.Header().Set("Access-Control-Allow-Credentials", "true") }
// maybeCheckJwtAuthorization returns true if access should be granted, false if it should be denied
func (fs *FilerServer) maybeCheckJwtAuthorization(r *http.Request, isWrite bool) bool {
var signingKey security.SigningKey
if isWrite { if len(fs.filerGuard.SigningKey) == 0 { return true } else { signingKey = fs.filerGuard.SigningKey } } else { if len(fs.filerGuard.ReadSigningKey) == 0 { return true } else { signingKey = fs.filerGuard.ReadSigningKey } }
tokenStr := security.GetJwt(r) if tokenStr == "" { glog.V(1).Infof("missing jwt from %s", r.RemoteAddr) return false }
token, err := security.DecodeJwt(signingKey, tokenStr, &security.SeaweedFilerClaims{}) if err != nil { glog.V(1).Infof("jwt verification error from %s: %v", r.RemoteAddr, err) return false } if !token.Valid { glog.V(1).Infof("jwt invalid from %s: %v", r.RemoteAddr, tokenStr) return false } else { return true } }
func (fs *FilerServer) filerHealthzHandler(w http.ResponseWriter, r *http.Request) { w.Header().Set("Server", "SeaweedFS "+util.VERSION) if _, err := fs.filer.Store.FindEntry(context.Background(), filer.TopicsDir); err != nil && err != filer_pb.ErrNotFound { glog.Warningf("filerHealthzHandler FindEntry: %+v", err) w.WriteHeader(http.StatusServiceUnavailable) } else { w.WriteHeader(http.StatusOK) } }
|