You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

112 lines
2.6 KiB

3 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
3 years ago
Fix dead lock (#5815) * reduce locks to avoid dead lock Flush->FlushData->uplloadPipeline.FluahAll uploaderCount>0 goroutine 1 [sync.Cond.Wait, 71 minutes]: sync.runtime_notifyListWait(0xc0007ae4d0, 0x0) /usr/local/go/src/runtime/sema.go:569 +0x159 sync.(*Cond).Wait(0xc001a59290?) /usr/local/go/src/sync/cond.go:70 +0x85 github.com/seaweedfs/seaweedfs/weed/mount/page_writer.(*UploadPipeline).waitForCurrentWritersToComplete(0xc0002ee4d0) /github/workspace/weed/mount/page_writer/upload_pipeline_lock.go:58 +0x32 github.com/seaweedfs/seaweedfs/weed/mount/page_writer.(*UploadPipeline).FlushAll(0xc0002ee4d0) /github/workspace/weed/mount/page_writer/upload_pipeline.go:151 +0x25 github.com/seaweedfs/seaweedfs/weed/mount.(*ChunkedDirtyPages).FlushData(0xc00087e840) /github/workspace/weed/mount/dirty_pages_chunked.go:54 +0x29 github.com/seaweedfs/seaweedfs/weed/mount.(*PageWriter).FlushData(...) /github/workspace/weed/mount/page_writer.go:50 github.com/seaweedfs/seaweedfs/weed/mount.(*WFS).doFlush(0xc0006ad600, 0xc00030d380, 0x0, 0x0) /github/workspace/weed/mount/weedfs_file_sync.go:101 +0x169 github.com/seaweedfs/seaweedfs/weed/mount.(*WFS).Flush(0xc0006ad600, 0xc001a594a8?, 0xc0004c1ca0) /github/workspace/weed/mount/weedfs_file_sync.go:59 +0x48 github.com/hanwen/go-fuse/v2/fuse.doFlush(0xc0000da870?, 0xc0004c1b08) SaveContent -> MemChunk.RLock -> ChunkedDirtyPages.saveChunkedFileIntervalToStorage pages.fh.AddChunks([]*filer_pb.FileChunk{chunk}) fh.entryLock.Lock() sync.(*RWMutex).Lock(0x0?) /usr/local/go/src/sync/rwmutex.go:146 +0x31 github.com/seaweedfs/seaweedfs/weed/mount.(*FileHandle).AddChunks(0xc00030d380, {0xc00028bdc8, 0x1, 0x1}) /github/workspace/weed/mount/filehandle.go:93 +0x45 github.com/seaweedfs/seaweedfs/weed/mount.(*ChunkedDirtyPages).saveChunkedFileIntervalToStorage(0xc00087e840, {0x2be7ac0, 0xc00018d9e0}, 0x0, 0x121, 0x17e3c624565ace45, 0x1?) /github/workspace/weed/mount/dirty_pages_chunked.go:80 +0x2d4 github.com/seaweedfs/seaweedfs/weed/mount/page_writer.(*MemChunk).SaveContent(0xc0008d9130, 0xc0008093e0) /github/workspace/weed/mount/page_writer/page_chunk_mem.go:115 +0x112 github.com/seaweedfs/seaweedfs/weed/mount/page_writer.(*UploadPipeline).moveToSealed.func1() /github/workspace/weed/mount/page_writer/upload_pipeline.go:187 +0x55 github.com/seaweedfs/seaweedfs/weed/util.(*LimitedConcurrentExecutor).Execute.func1() /github/workspace/weed/util/limited_executor.go:38 +0x62 created by github.com/seaweedfs/seaweedfs/weed/util.(*LimitedConcurrentExecutor).Execute in goroutine 1 /github/workspace/weed/util/limited_executor.go:33 +0x97 On metadata update fh.entryLock.Lock() fh.dirtyPages.Destroy() up.chunksLock.Lock => each sealed chunk.FreeReference => MemChunk.Lock goroutine 134 [sync.RWMutex.Lock, 71 minutes]: sync.runtime_SemacquireRWMutex(0xc0007c3558?, 0xea?, 0x3fb0800?) /usr/local/go/src/runtime/sema.go:87 +0x25 sync.(*RWMutex).Lock(0xc0007c35a8?) /usr/local/go/src/sync/rwmutex.go:151 +0x6a github.com/seaweedfs/seaweedfs/weed/mount/page_writer.(*MemChunk).FreeResource(0xc0008d9130) /github/workspace/weed/mount/page_writer/page_chunk_mem.go:38 +0x2a github.com/seaweedfs/seaweedfs/weed/mount/page_writer.(*SealedChunk).FreeReference(0xc00071cdb0, {0xc0006ba1a0, 0x20}) /github/workspace/weed/mount/page_writer/upload_pipeline.go:38 +0xb7 github.com/seaweedfs/seaweedfs/weed/mount/page_writer.(*UploadPipeline).Shutdown(0xc0002ee4d0) /github/workspace/weed/mount/page_writer/upload_pipeline.go:220 +0x185 github.com/seaweedfs/seaweedfs/weed/mount.(*ChunkedDirtyPages).Destroy(0xc0008cea40?) /github/workspace/weed/mount/dirty_pages_chunked.go:87 +0x17 github.com/seaweedfs/seaweedfs/weed/mount.(*PageWriter).Destroy(...) /github/workspace/weed/mount/page_writer.go:78 github.com/seaweedfs/seaweedfs/weed/mount.NewSeaweedFileSystem.func3({0xc00069a6c0, 0x30}, 0x6?) /github/workspace/weed/mount/weedfs.go:119 +0x17a github.com/seaweedfs/seaweedfs/weed/mount/meta_cache.NewMetaCache.func1({0xc00069a6c0?, 0xc00069a480?}, 0x4015b40?) /github/workspace/weed/mount/meta_cache/meta_cache.go:37 +0x1c github.com/seaweedfs/seaweedfs/weed/mount/meta_cache.SubscribeMetaEvents.func1(0xc000661810) /github/workspace/weed/mount/meta_cache/meta_cache_subscribe.go:43 +0x570 * use locked entry everywhere * modifiable remote entry * skip locking after getting lock from fhLockTable
5 months ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
more solid weed mount (#4089) * compare chunks by timestamp * fix slab clearing error * fix test compilation * move oldest chunk to sealed, instead of by fullness * lock on fh.entryViewCache * remove verbose logs * revert slat clearing * less logs * less logs * track write and read by timestamp * remove useless logic * add entry lock on file handle release * use mem chunk only, swap file chunk has problems * comment out code that maybe used later * add debug mode to compare data read and write * more efficient readResolvedChunks with linked list * small optimization * fix test compilation * minor fix on writer * add SeparateGarbageChunks * group chunks into sections * turn off debug mode * fix tests * fix tests * tmp enable swap file chunk * Revert "tmp enable swap file chunk" This reverts commit 985137ec472924e4815f258189f6ca9f2168a0a7. * simple refactoring * simple refactoring * do not re-use swap file chunk. Sealed chunks should not be re-used. * comment out debugging facilities * either mem chunk or swap file chunk is fine now * remove orderedMutex as *semaphore.Weighted not found impactful * optimize size calculation for changing large files * optimize performance to avoid going through the long list of chunks * still problems with swap file chunk * rename * tiny optimization * swap file chunk save only successfully read data * fix * enable both mem and swap file chunk * resolve chunks with range * rename * fix chunk interval list * also change file handle chunk group when adding chunks * pick in-active chunk with time-decayed counter * fix compilation * avoid nil with empty fh.entry * refactoring * rename * rename * refactor visible intervals to *list.List * refactor chunkViews to *list.List * add IntervalList for generic interval list * change visible interval to use IntervalList in generics * cahnge chunkViews to *IntervalList[*ChunkView] * use NewFileChunkSection to create * rename variables * refactor * fix renaming leftover * renaming * renaming * add insert interval * interval list adds lock * incrementally add chunks to readers Fixes: 1. set start and stop offset for the value object 2. clone the value object 3. use pointer instead of copy-by-value when passing to interval.Value 4. use insert interval since adding chunk could be out of order * fix tests compilation * fix tests compilation
2 years ago
3 years ago
3 years ago
3 years ago
  1. package mount
  2. import (
  3. "github.com/seaweedfs/seaweedfs/weed/filer"
  4. "github.com/seaweedfs/seaweedfs/weed/glog"
  5. "github.com/seaweedfs/seaweedfs/weed/pb/filer_pb"
  6. "github.com/seaweedfs/seaweedfs/weed/util"
  7. "os"
  8. "sync"
  9. )
  10. type FileHandleId uint64
  11. var IsDebugFileReadWrite = false
  12. type FileHandle struct {
  13. fh FileHandleId
  14. counter int64
  15. entry *LockedEntry
  16. entryLock sync.RWMutex
  17. entryChunkGroup *filer.ChunkGroup
  18. inode uint64
  19. wfs *WFS
  20. // cache file has been written to
  21. dirtyMetadata bool
  22. dirtyPages *PageWriter
  23. reader *filer.ChunkReadAt
  24. contentType string
  25. isDeleted bool
  26. // for debugging
  27. mirrorFile *os.File
  28. }
  29. func newFileHandle(wfs *WFS, handleId FileHandleId, inode uint64, entry *filer_pb.Entry) *FileHandle {
  30. fh := &FileHandle{
  31. fh: handleId,
  32. counter: 1,
  33. inode: inode,
  34. wfs: wfs,
  35. }
  36. // dirtyPages: newContinuousDirtyPages(file, writeOnly),
  37. fh.dirtyPages = newPageWriter(fh, wfs.option.ChunkSizeLimit)
  38. fh.entry = &LockedEntry{
  39. Entry: entry,
  40. }
  41. if entry != nil {
  42. fh.SetEntry(entry)
  43. }
  44. if IsDebugFileReadWrite {
  45. var err error
  46. fh.mirrorFile, err = os.OpenFile("/tmp/sw/"+entry.Name, os.O_RDWR|os.O_CREATE, 0600)
  47. if err != nil {
  48. println("failed to create mirror:", err.Error())
  49. }
  50. }
  51. return fh
  52. }
  53. func (fh *FileHandle) FullPath() util.FullPath {
  54. fp, _ := fh.wfs.inodeToPath.GetPath(fh.inode)
  55. return fp
  56. }
  57. func (fh *FileHandle) GetEntry() *LockedEntry {
  58. return fh.entry
  59. }
  60. func (fh *FileHandle) SetEntry(entry *filer_pb.Entry) {
  61. if entry != nil {
  62. fileSize := filer.FileSize(entry)
  63. entry.Attributes.FileSize = fileSize
  64. var resolveManifestErr error
  65. fh.entryChunkGroup, resolveManifestErr = filer.NewChunkGroup(fh.wfs.LookupFn(), fh.wfs.chunkCache, entry.Chunks)
  66. if resolveManifestErr != nil {
  67. glog.Warningf("failed to resolve manifest chunks in %+v", entry)
  68. }
  69. } else {
  70. glog.Fatalf("setting file handle entry to nil")
  71. }
  72. fh.entry.SetEntry(entry)
  73. }
  74. func (fh *FileHandle) UpdateEntry(fn func(entry *filer_pb.Entry)) *filer_pb.Entry {
  75. return fh.entry.UpdateEntry(fn)
  76. }
  77. func (fh *FileHandle) AddChunks(chunks []*filer_pb.FileChunk) {
  78. fh.entry.AppendChunks(chunks)
  79. }
  80. func (fh *FileHandle) ReleaseHandle() {
  81. fhActiveLock := fh.wfs.fhLockTable.AcquireLock("ReleaseHandle", fh.fh, util.ExclusiveLock)
  82. defer fh.wfs.fhLockTable.ReleaseLock(fh.fh, fhActiveLock)
  83. fh.dirtyPages.Destroy()
  84. if IsDebugFileReadWrite {
  85. fh.mirrorFile.Close()
  86. }
  87. }
  88. func lessThan(a, b *filer_pb.FileChunk) bool {
  89. if a.ModifiedTsNs == b.ModifiedTsNs {
  90. return a.Fid.FileKey < b.Fid.FileKey
  91. }
  92. return a.ModifiedTsNs < b.ModifiedTsNs
  93. }