mergerfs/mkdocs/docs/faq/technical_behavior_and_limitations.md

Technical Behavior and Limitations

Do hard links work?

Yes. links (otherwise known as hard links) are fundamentally supported by mergerfs. There is no option to enable or disable links. All comments elswhere claiming they do not work are related to the setup of the user's system.

See the Intro to Filesystems page for more details on what a link is.

A limitation of a link is that it must reference a file/inode within the same filesystem or device. When a request is made to the operating system to link (or rename) a file to a target location the OS will first check if the source and target are the same filesystem / device. If not it will return the error EXDEV meaning that the request is not able to be made due to the result being "cross device".

What catches many users off guard is that this "cross device" check is not very deep or involved. Even the same filesystem bind mounted to another location will typically be considered a different device. So when mergerfs is creating a union of other filesystems there is no way to link or rename from one of the underlying branches into mergerfs. They are different filesystems even if logically they seem related or the same. And similarly it is impossible for mergerfs to truly make a link between two branches which are not in fact the same mounted filesystem.

This is relevant to mergerfs users because bind mounts are very common when using container runtimes such as Docker, Podman, or Kubernetes. When you add a volume or mount to your container that is in fact a bind mount of that path. Meaning if you were to add /mnt/mergerfs/downloads and /mnt/mergerfs/movies as separate mounts into your container any request to link between the two locations within the container will fail with the EXDEV error even though it will work perfectly fine on the host. If you wish for link and rename to work you MUST mount into the container a point in the directory structure above what you wish to use. In this case /mnt/mergerfs.

Another situation where people will hit unexpected EXDEV errors is when they use a policy which makes file creation decisions based on existing paths. If the source of a link or rename is on branch A but the target directory is on branch B, given the whole point of the policy is to strictly enforce behavior based on what branches already exist, it must return EXDEV. Doing otherwise would fundamentally break the purpose of the policy. Read rename & link for more details on how mergerfs handles those two functions.

When in doubt it is trivial to test link:

$ cd /mnt/mergerfs/
$ touch foo
$ ln -v foo bar
'bar' => 'foo'
$ stat foo bar | grep Inode
Device: 0,173   Inode: 123456  Links: 2
Device: 0,173   Inode: 123456  Links: 2

For the more technical: within mergerfs the inode of a file is not necessarily indicative of two file names linking to the same underlying data. For more details as to why that is see the docs on inodecalc.

Do reflink, FICLONE, or FICLONERANGE work?

Unfortunately not. FUSE, the technology mergerfs is based on, does not support the clone_file_range feature needed for it to work. mergerfs won't even know such a request is made. The kernel will simply return an error back to the application making the request.

Should FUSE gain the ability mergerfs will be updated to support it.

That said: mergerfs itself will attempt to use FICLONE when copying data between files in the limited cases where it copies/moves files.

How does mergerfs handle moving and copying of files?

This is a very common mistaken assumption regarding how filesystems work. There is no such thing as "move" or "copy." These concepts are high level behaviors made up of numerous independent steps and not individual filesystem functions.

A "move" can include a "copy" so lets describe copy first.

When an application copies a file from "source" to "destination" it can do so in a number of ways but the basics are the following.

1. open the source file.
2. create the destination file.
3. read a chunk of data from source and write to destination. Continue till it runs out of data to copy.
4. Copy file metadata (stat) such as ownership (chown), permissions (chmod), timestamps (utimes), extended attributes (getxattr, setxattr), etc.
5. close source and destination files.

"move" is typically a rename(src,dst) and if that errors with EXDEV (meaning the source and destination are on different filesystems) the application will "copy" the file as described above and then it removes (unlink) the source.

The rename(src,dst), open(src), create(dst), data copying, metadata copying, unlink(src), etc. are entirely distinct and separate events. There is really no practical way to know that what is ultimately occurring is the "copying" of a file or what the source file would be. Since the source is not known there is no way to know how large a created file is destined to become. This is why it is impossible for mergerfs to choose the branch for a create based on file size. The only context provided when a file is created, besides the name, is the permissions, if it is to be read and/or written, and some low level settings for the operating system.

All of this means that mergerfs can not make decisions when a file is created based on file size or the source of the data. That information is simply not available. At best mergerfs could respond to files reaching a certain size when writing data, a file is closed, or renamed.

Related: if a user wished to have mergerfs perform certain activities based on the name of a file it is common and even best practice for a program to write to a temporary file first and then rename to its final destination. That temporary file name will typically be random and have no indication of the type of file being written. At best something could be done on rename.

Additional reading: Intro to Filesystems: Workflows

Why does the total available space in mergerfs not equal outside?

Are you using ext2/3/4? With reserve for root? mergerfs uses available space for statfs calculations. If you've reserved space for root then it won't show up.

You can remove the reserve by running: tune2fs -m 0 <device>

I notice massive slowdowns of writes when enabling cache.files.

When file caching is enabled in any form (cache.files!=off) it will issue getxattr requests for security.capability prior to every single write. This will usually result in performance degradation, especially when using a network filesystem (such as NFS or SMB.) Unfortunately at this moment, the kernel is not caching the response.

To work around this situation mergerfs offers a few solutions.

1. Set security_capability=false. It will short circuit any call and return ENOATTR. This still means though that mergerfs will receive the request before every write but at least it doesn't get passed through to the underlying filesystem.
2. Set xattr=noattr. Same as above but applies to all calls to getxattr. Not just security.capability. This will not be cached by the kernel either but mergerfs' runtime config system will still function.
3. Set xattr=nosys. Results in mergerfs returning ENOSYS which will be cached by the kernel. No future xattr calls will be forwarded to mergerfs. The downside is that also means the xattr based config and query functionality won't work either.
4. Disable file caching. If you aren't using applications which use mmap it's probably simpler to just disable it altogether. The kernel won't send the requests when caching is disabled.

Why use FUSE? Why not a kernel based solution?

As with any solution to a problem, there are advantages and disadvantages to each one.

A FUSE based solution has all the downsides of FUSE:

• Higher IO latency due to the trips in and out of kernel space
• Higher general overhead due to trips in and out of kernel space
• Double caching when using page caching
• Misc limitations due to FUSE's design

But FUSE also has a lot of upsides:

• Easier to offer a cross platform solution
• Easier forward and backward compatibility
• Easier updates for users
• Easier and faster release cadence
• Allows more flexibility in design and features
• Overall easier to write, secure, and maintain
• Much lower barrier to entry (getting code into the kernel takes a lot of time and effort initially)

Is my OS's libfuse needed for mergerfs to work?

No. Normally mount.fuse is needed to get mergerfs (or any FUSE filesystem to mount using the mount command but in vendoring the libfuse library the mount.fuse app has been renamed to mount.mergerfs meaning the filesystem type in fstab can simply be mergerfs. That said there should be no harm in having it installed and continuing to using fuse.mergerfs as the type in /etc/fstab.

If mergerfs doesn't work as a type it could be due to how the mount.mergerfs tool was installed. Must be in /sbin/ with proper permissions.

Why was splice support removed?

After a lot of testing over the years, splicing always appeared to at best, provide equivalent performance, and in some cases, worse performance. Splice is not supported on other platforms forcing a traditional read/write fallback to be provided. The splice code was removed to simplify the codebase.

How does mergerfs handle credentials?

mergerfs is a multithreaded application in order to handle requests from the kernel concurrently. Each FUSE message has a header with certain details about the request including the process ID (pid) of the requesting application, the process' effective user id (uid), and group id (gid). To ensure proper POSIX filesystem behavior and security mergerfs must change its identity to match that of the requester when performing the certain functions on the underlying filesystem. As required by standards most Unix/POSIX based systems a process and all its threads are under the same uid and gid. However, on Linux each thread may have its own credentials. This allows mergerfs to be multithreaded and for each thread to change to the credentials as required by the incoming message it is handling. However, currently on FreeBSD this is not possible (though there has been discussions) and as such must change the credentials of the whole application when actioning messages. mergerfs does optimize this behavior by only changing credentials and locking the thread to do so if the process is currently not the same as what is necessary by the incoming request. As a result of this design FreeBSD may experience more contention and therefore lower performance than Linux.

Additionally, mergerfs utilizes a cache for supplemental groups due the the high cost of querying that information.

Does mergerfs support idmap?

Yes. At least in so far as it's been enabled now the FUSE itself allows a filesystem to indicate it is allowed.

Requires that kernel-permissions-check be enabled (the default.)

If there are any usage issues contact the author.

What happens if a branch filesystem blocks?

POSIX filesystem calls unfortunately are entirely synchronous. If the underlying filesystem mergerfs is interacting with freezes up or blocks then the thread issuing the request will block same as any other piece of software. If enough threads block then mergerfs will block. There are no timeouts or ways to truly work around this situation. If mergerfs spawned new threads it is very likely they too would end up blocked.

What information does mergerfs have when making decisions?

Every incoming request contains:

• The tid or pid of the calling thread/process
• The uid and gid of the calling thread/process
• The umask of the calling thread/process
• The arguments of the filesystem call in question

Naturally the mergerfs config as well as anything queriable from the operating system or filesystems are also available.