mergerfs/man/mergerfs.1

.\"t
.TH "mergerfs" "1" "2016\-01\-12" "mergerfs user manual" ""
.SH NAME
.PP
mergerfs \- another FUSE union filesystem
.SH SYNOPSIS
.PP
mergerfs \-o<options> <srcmounts> <mountpoint>
.SH DESCRIPTION
.PP
\f[B]mergerfs\f[] is similar to \f[B]mhddfs\f[], \f[B]unionfs\f[], and
\f[B]aufs\f[].
Like \f[B]mhddfs\f[] in that it too uses \f[B]FUSE\f[].
Like \f[B]aufs\f[] in that it provides multiple policies for how to
handle behavior.
.PP
Why \f[B]mergerfs\f[] when those exist?
\f[B]mhddfs\f[] has not been updated in some time nor very flexible.
There are also security issues when with running as root.
\f[B]aufs\f[] is more flexible than \f[B]mhddfs\f[] but kernel based and
difficult to debug when problems arise.
Neither support file attributes
(chattr (http://linux.die.net/man/1/chattr)).
.SH FEATURES
.IP \[bu] 2
Runs in userspace (FUSE)
.IP \[bu] 2
Configurable behaviors
.IP \[bu] 2
Supports extended attributes (xattrs)
.IP \[bu] 2
Supports file attributes (chattr)
.IP \[bu] 2
Dynamically configurable (via xattrs)
.IP \[bu] 2
Safe to run as root
.IP \[bu] 2
Opportunistic credential caching
.IP \[bu] 2
Works with heterogeneous filesystem types
.SH OPTIONS
.SS options
.IP \[bu] 2
\f[B]defaults\f[]: a shortcut for FUSE\[aq]s \f[B]atomic_o_trunc\f[],
\f[B]auto_cache\f[], \f[B]big_writes\f[], \f[B]default_permissions\f[],
\f[B]splice_move\f[], \f[B]splice_read\f[], and \f[B]splice_write\f[].
These options seem to provide the best performance.
.IP \[bu] 2
\f[B]direct_io\f[]: causes FUSE to bypass an addition caching step which
can increase write speeds at the detriment of read speed.
.IP \[bu] 2
\f[B]minfreespace\f[]: the minimum space value used for the
\f[B]lfs\f[], \f[B]fwfs\f[], and \f[B]epmfs\f[] policies.
Understands \[aq]K\[aq], \[aq]M\[aq], and \[aq]G\[aq] to represent
kilobyte, megabyte, and gigabyte respectively.
(default: 4G)
.IP \[bu] 2
\f[B]moveonenospc\f[]: when enabled (set to \f[B]true\f[]) if a
\f[B]write\f[] fails with \f[B]ENOSPC\f[] a scan of all drives will be
done looking for the drive with most free space which is at least the
size of the file plus the amount which failed to write.
An attempt to move the file to that drive will occur (keeping all
metadata possible) and if successful the original is unlinked and the
write retried.
(default: false)
.IP \[bu] 2
\f[B]func.<func>=<policy>\f[]: sets the specific FUSE function\[aq]s
policy.
See below for the list of value types.
Example: \f[B]func.getattr=newest\f[]
.IP \[bu] 2
\f[B]category.<category>=<policy>\f[]: Sets policy of all FUSE functions
in the provided category.
Example: \f[B]category.create=mfs\f[]
.PP
\f[B]NOTE:\f[] Options are evaluated in the order listed so if the
options are \f[B]func.rmdir=rand,category.action=ff\f[] the
\f[B]action\f[] category setting will override the \f[B]rmdir\f[]
setting.
.SS srcmounts
.PP
The source mounts argument is a colon (\[aq]:\[aq]) delimited list of
paths.
To make it simpler to include multiple source mounts without having to
modify your fstab (http://linux.die.net/man/5/fstab) we also support
globbing (http://linux.die.net/man/7/glob).
\f[B]The globbing tokens MUST be escaped when using via the shell else
the shell itself will probably expand it.\f[]
.IP
.nf
\f[C]
$\ mergerfs\ /mnt/disk\\*:/mnt/cdrom\ /media/drives
\f[]
.fi
.PP
The above line will use all mount points in /mnt prefixed with
\f[I]disk\f[] and the directory \f[I]cdrom\f[].
.PP
In /etc/fstab it\[aq]d look like the following:
.IP
.nf
\f[C]
#\ <file\ system>\ \ \ \ \ \ \ \ <mount\ point>\ \ <type>\ \ \ \ \ \ \ \ \ <options>\ \ \ \ \ \ \ \ \ \ \ \ \ <dump>\ \ <pass>
/mnt/disk*:/mnt/cdrom\ \ /media/drives\ \ fuse.mergerfs\ \ defaults,allow_other\ \ 0\ \ \ \ \ \ \ 0
\f[]
.fi
.PP
\f[B]NOTE:\f[] the globbing is done at mount or xattr update time.
If a new directory is added matching the glob after the fact it will not
be included.
.SH POLICIES
.PP
Filesystem calls are broken up into 3 categories: \f[B]action\f[],
\f[B]create\f[], \f[B]search\f[].
There are also some calls which have no policy attached due to state
being kept between calls.
These categories can be assigned a policy which dictates how
\f[B]mergerfs\f[] behaves.
Any policy can be assigned to a category though some aren\[aq]t terribly
practical.
For instance: \f[B]rand\f[] (Random) may be useful for \f[B]create\f[]
but could lead to very odd behavior if used for \f[B]search\f[].
.SS Functional classifications
.PP
.TS
tab(@);
l l.
T{
Category
T}@T{
FUSE Functions
T}
_
T{
action
T}@T{
chmod, chown, link, removexattr, rename, rmdir, setxattr, truncate,
unlink, utimens
T}
T{
create
T}@T{
create, mkdir, mknod, symlink
T}
T{
search
T}@T{
access, getattr, getxattr, ioctl, listxattr, open, readlink
T}
T{
N/A
T}@T{
fallocate, fgetattr, fsync, ftruncate, ioctl, read, readdir, release,
statfs, write
T}
.TE
.PP
\f[B]ioctl\f[] behaves differently if its acting on a directory.
It\[aq]ll use the \f[B]getattr\f[] policy to find and open the directory
before issuing the \f[B]ioctl\f[].
In other cases where something may be searched (to confirm a directory
exists across all source mounts) then \f[B]getattr\f[] will be used.
.SS Policy descriptions
.PP
.TS
tab(@);
l l.
T{
Policy
T}@T{
Description
T}
_
T{
ff (first found)
T}@T{
Given the order of the drives act on the first one found (regardless if
stat would return EACCES).
T}
T{
ffwp (first found w/ permissions)
T}@T{
Given the order of the drives act on the first one found which you have
access (stat does not error with EACCES).
T}
T{
newest (newest file)
T}@T{
If multiple files exist return the one with the most recent mtime.
T}
T{
mfs (most free space)
T}@T{
Use the drive with the most free space available.
T}
T{
epmfs (existing path, most free space)
T}@T{
If the path exists on multiple drives use the one with the most free
space and is greater than \f[B]minfreespace\f[].
If no drive has at least \f[B]minfreespace\f[] then fallback to
\f[B]mfs\f[].
T}
T{
fwfs (first with free space)
T}@T{
Pick the first drive which has at least \f[B]minfreespace\f[].
T}
T{
lfs (least free space)
T}@T{
Pick the drive with least available space but more than
\f[B]minfreespace\f[].
T}
T{
rand (random)
T}@T{
Pick an existing drive at random.
T}
T{
all
T}@T{
Applies action to all found.
For searches it will behave like first found \f[B]ff\f[].
T}
T{
enosys, einval, enotsup, exdev, erofs
T}@T{
Exclusively return \f[C]\-1\f[] with \f[C]errno\f[] set to the
respective value.
Useful for debugging other applications\[aq] behavior to errors.
T}
.TE
.SS Defaults
.PP
.TS
tab(@);
l l.
T{
Category
T}@T{
Policy
T}
_
T{
action
T}@T{
all
T}
T{
create
T}@T{
epmfs
T}
T{
search
T}@T{
ff
T}
.TE
.SS rename
.PP
rename (http://man7.org/linux/man-pages/man2/rename.2.html) is a tricky
function in a merged system.
Normally if a rename can\[aq]t be done atomically due to the source and
destination paths existing on different mount points it will return
\f[C]\-1\f[] with \f[C]errno\ =\ EXDEV\f[].
The atomic rename is most critical for replacing files in place
atomically (such as securing writing to a temp file and then replacing a
target).
The problem is that by merging multiple paths you can have N instances
of the source and destinations on different drives.
This can lead to several undesirable situtations with or without errors
and it\[aq]s not entirely obvious what to do when an error occurs.
.PP
Originally mergerfs would return EXDEV whenever a rename was requested
which was cross directory in any way.
This made the code simple and was technically complient with POSIX
requirements.
However, many applications fail to handle EXDEV at all and treat it as a
normal error or they only partially support EXDEV (don\[aq]t respond the
same as \f[C]mv\f[] would).
Such apps include: gvfsd\-fuse v1.20.3 and prior, Finder / CIFS/SMB
client in Apple OSX 10.9+, NZBGet, Samba\[aq]s recycling bin feature.
.IP \[bu] 2
If using a policy which tries to preserve directories (epmfs)
.IP \[bu] 2
Using the \f[C]rename\f[] policy get the list of files to rename
.IP \[bu] 2
For each file attempt rename:
.RS 2
.IP \[bu] 2
If failure with ENOENT run \f[C]create\f[] policy
.IP \[bu] 2
If create policy returns the same drive as currently evaluating then
clone the path
.IP \[bu] 2
Re\-attempt rename
.RE
.IP \[bu] 2
If \f[B]any\f[] of the renames succeed the higher level rename is
considered a success
.IP \[bu] 2
If \f[B]no\f[] renames succeed the first error encountered will be
returned
.IP \[bu] 2
On success:
.RS 2
.IP \[bu] 2
Remove the target from all drives with no source file
.IP \[bu] 2
Remove the source from all drives which failed to rename
.RE
.IP \[bu] 2
If using a policy which does \f[B]not\f[] try to preserve directories
.IP \[bu] 2
Using the \f[C]rename\f[] policy get the list of files to rename
.IP \[bu] 2
Using the \f[C]getattr\f[] policy get the target path
.IP \[bu] 2
For each file attempt rename:
.RS 2
.IP \[bu] 2
If the source drive != target drive:
.IP \[bu] 2
Clone target path from target drive to source drive
.IP \[bu] 2
Rename
.RE
.IP \[bu] 2
If \f[B]any\f[] of the renames succeed the higher level rename is
considered a success
.IP \[bu] 2
If \f[B]no\f[] renames succeed the first error encountered will be
returned
.IP \[bu] 2
On success:
.RS 2
.IP \[bu] 2
Remove the target from all drives with no source file
.IP \[bu] 2
Remove the source from all drives which failed to rename
.RE
.PP
The the removals are subject to normal entitlement checks.
.PP
The above behavior will help minimize the likelihood of EXDEV being
returned but it will still be possible.
To remove the possibility all together mergerfs would need to perform
the as \f[C]mv\f[] does when it receives EXDEV normally.
.SS readdir
.PP
readdir (http://linux.die.net/man/3/readdir) is very different from most
functions in this realm.
It certainly could have it\[aq]s own set of policies to tweak its
behavior.
At this time it provides a simple \f[B]first found\f[] merging of
directories and file found.
That is: only the first file or directory found for a directory is
returned.
Given how FUSE works though the data representing the returned entry
comes from \f[B]getattr\f[].
.PP
It could be extended to offer the ability to see all files found.
Perhaps concatenating \f[B]#\f[] and a number to the name.
But to really be useful you\[aq]d need to be able to access them which
would complicate file lookup.
.SS statvfs
.PP
statvfs (http://linux.die.net/man/2/statvfs) normalizes the source
drives based on the fragment size and sums the number of adjusted blocks
and inodes.
This means you will see the combined space of all sources.
Total, used, and free.
The sources however are dedupped based on the drive so multiple mount
points on the same drive will not result in double counting it\[aq]s
space.
.PP
\f[B]NOTE:\f[] Since we can not (easily) replicate the atomicity of an
\f[B]mkdir\f[] or \f[B]mknod\f[] without side effects those calls will
first do a scan to see if the file exists and then attempts a create.
This means there is a slight race condition.
Worse case you\[aq]d end up with the directory or file on more than one
mount.
.SH BUILDING
.PP
\f[B]NOTE:\f[] Prebuilt packages can be found at:
https://github.com/trapexit/mergerfs/releases
.PP
First get the code from github (http://github.com/trapexit/mergerfs).
.IP
.nf
\f[C]
$\ git\ clone\ https://github.com/trapexit/mergerfs.git
$\ #\ or
$\ wget\ https://github.com/trapexit/mergerfs/archive/master.zip
\f[]
.fi
.SS Debian / Ubuntu
.IP
.nf
\f[C]
$\ sudo\ apt\-get\ install\ g++\ pkg\-config\ git\ git\-buildpackage\ pandoc\ debhelper\ libfuse\-dev\ libattr1\-dev
$\ cd\ mergerfs
$\ make\ deb
$\ sudo\ dpkg\ \-i\ ../mergerfs_version_arch.deb
\f[]
.fi
.SS Fedora
.IP
.nf
\f[C]
$\ su\ \-
#\ dnf\ install\ rpm\-build\ fuse\-devel\ libattr\-devel\ pandoc\ gcc\-c++\ git\ make\ which
#\ cd\ mergerfs
#\ make\ rpm
#\ rpm\ \-i\ rpmbuild/RPMS/<arch>/mergerfs\-<verion>.<arch>.rpm
\f[]
.fi
.SS Generically
.PP
Have pkg\-config, pandoc, libfuse, libattr1 installed.
.IP
.nf
\f[C]
$\ cd\ mergerfs
$\ make
$\ make\ man
$\ sudo\ make\ install
\f[]
.fi
.SH RUNTIME
.SS \&.mergerfs pseudo file
.IP
.nf
\f[C]
<mountpoint>/.mergerfs
\f[]
.fi
.PP
There is a pseudo file available at the mount point which allows for the
runtime modification of certain \f[B]mergerfs\f[] options.
The file will not show up in \f[B]readdir\f[] but can be
\f[B]stat\f[]\[aq]ed and manipulated via
{list,get,set}xattrs (http://linux.die.net/man/2/listxattr) calls.
.PP
Even if xattrs are disabled the
{list,get,set}xattrs (http://linux.die.net/man/2/listxattr) calls will
still work.
.SS Keys
.PP
Use \f[C]xattr\ \-l\ /mount/point/.mergerfs\f[] to see all supported
keys.
.SS Example
.IP
.nf
\f[C]
[trapexit:/tmp/mount]\ $\ xattr\ \-l\ .mergerfs
user.mergerfs.srcmounts:\ /tmp/a:/tmp/b
user.mergerfs.minfreespace:\ 4294967295
user.mergerfs.moveonenospc:\ false
user.mergerfs.policies:\ all,einval,enosys,enotsup,epmfs,erofs,exdev,ff,ffwp,fwfs,lfs,mfs,newest,rand
user.mergerfs.version:\ x.y.z
user.mergerfs.category.action:\ all
user.mergerfs.category.create:\ epmfs
user.mergerfs.category.search:\ ff
user.mergerfs.func.access:\ ff
user.mergerfs.func.chmod:\ all
user.mergerfs.func.chown:\ all
user.mergerfs.func.create:\ epmfs
user.mergerfs.func.getattr:\ ff
user.mergerfs.func.getxattr:\ ff
user.mergerfs.func.link:\ all
user.mergerfs.func.listxattr:\ ff
user.mergerfs.func.mkdir:\ epmfs
user.mergerfs.func.mknod:\ epmfs
user.mergerfs.func.open:\ ff
user.mergerfs.func.readlink:\ ff
user.mergerfs.func.removexattr:\ all
user.mergerfs.func.rename:\ all
user.mergerfs.func.rmdir:\ all
user.mergerfs.func.setxattr:\ all
user.mergerfs.func.symlink:\ epmfs
user.mergerfs.func.truncate:\ all
user.mergerfs.func.unlink:\ all
user.mergerfs.func.utimens:\ all

[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.category.search\ .mergerfs
ff

[trapexit:/tmp/mount]\ $\ xattr\ \-w\ user.mergerfs.category.search\ ffwp\ .mergerfs
[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.category.search\ .mergerfs
ffwp

[trapexit:/tmp/mount]\ $\ xattr\ \-w\ user.mergerfs.srcmounts\ +/tmp/c\ .mergerfs
[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.srcmounts\ .mergerfs
/tmp/a:/tmp/b:/tmp/c

[trapexit:/tmp/mount]\ $\ xattr\ \-w\ user.mergerfs.srcmounts\ =/tmp/c\ .mergerfs
[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.srcmounts\ .mergerfs
/tmp/c

[trapexit:/tmp/mount]\ $\ xattr\ \-w\ user.mergerfs.srcmounts\ \[aq]+</tmp/a:/tmp/b\[aq]\ .mergerfs
[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.srcmounts\ .mergerfs
/tmp/a:/tmp/b:/tmp/c
\f[]
.fi
.SS user.mergerfs.srcmounts
.PP
For \f[B]user.mergerfs.srcmounts\f[] there are several instructions
available for manipulating the list.
The value provided is just as the value used at mount time.
A colon (\[aq]:\[aq]) delimited list of full path globs.
.PP
.TS
tab(@);
l l.
T{
Instruction
T}@T{
Description
T}
_
T{
[list]
T}@T{
set
T}
T{
+<[list]
T}@T{
prepend
T}
T{
+>[list]
T}@T{
append
T}
T{
\-[list]
T}@T{
remove all values provided
T}
T{
\-<
T}@T{
remove first in list
T}
T{
\->
T}@T{
remove last in list
T}
.TE
.SS minfreespace
.PP
Input: interger with an optional suffix.
\f[B]K\f[], \f[B]M\f[], or \f[B]G\f[].
Output: value in bytes
.SS moveonenospc
.PP
Input: \f[B]true\f[] and \f[B]false\f[] Ouput: \f[B]true\f[] or
\f[B]false\f[]
.SS categories / funcs
.PP
Input: short policy string as described elsewhere in this document
Output: the policy string except for categories where its funcs have
multiple types.
In that case it will be a comma separated list.
.SS mergerfs file xattrs
.PP
While they won\[aq]t show up when using
listxattr (http://linux.die.net/man/2/listxattr) \f[B]mergerfs\f[]
offers a number of special xattrs to query information about the files
served.
To access the values you will need to issue a
getxattr (http://linux.die.net/man/2/getxattr) for one of the following:
.IP \[bu] 2
\f[B]user.mergerfs.basepath:\f[] the base mount point for the file given
the current search policy
.IP \[bu] 2
\f[B]user.mergerfs.relpath:\f[] the relative path of the file from the
perspective of the mount point
.IP \[bu] 2
\f[B]user.mergerfs.fullpath:\f[] the full path of the original file
given the search policy
.IP \[bu] 2
\f[B]user.mergerfs.allpaths:\f[] a NUL (\[aq]\[aq]) separated list of
full paths to all files found
.IP
.nf
\f[C]
[trapexit:/tmp/mount]\ $\ ls
A\ B\ C
[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.fullpath\ A
/mnt/a/full/path/to/A
[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.basepath\ A
/mnt/a
[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.relpath\ A
/full/path/to/A
[trapexit:/tmp/mount]\ $\ xattr\ \-p\ user.mergerfs.allpaths\ A\ |\ tr\ \[aq]\\0\[aq]\ \[aq]\\n\[aq]
/mnt/a/full/path/to/A
/mnt/b/full/path/to/A
\f[]
.fi
.SH TOOLING
.IP \[bu] 2
/usr/sbin/fsck.mergerfs: Provides permissions and ownership auditing and
the ability to fix them.
.SH TIPS / NOTES
.IP \[bu] 2
If you don\[aq]t see some directories / files you expect in a merged
point be sure the user has permission to all the underlying directories.
If \f[C]/drive0/a\f[] has is owned by \f[C]root:root\f[] with ACLs set
to \f[C]0700\f[] and \f[C]/drive1/a\f[] is \f[C]root:root\f[] and
\f[C]0755\f[] you\[aq]ll see only \f[C]/drive1/a\f[].
Use \f[C]fsck.mergerfs\f[] to audit the drive for out of sync
permissions.
.IP \[bu] 2
Since POSIX gives you only error or success on calls its difficult to
determine the proper behavior when applying the behavior to multiple
targets.
Generally if something succeeds when reading it returns the data it can.
If something fails when making an action we continue on and return the
last error.
.IP \[bu] 2
The recommended options are \f[B]defaults,allow_other\f[].
The \f[B]allow_other\f[] is to allow users who are not the one which
executed mergerfs access to the mountpoint.
\f[B]defaults\f[] is described above and should offer the best
performance.
It\[aq]s possible that if you\[aq]re running on an older platform the
\f[B]splice\f[] features aren\[aq]t available and could error.
In that case simply use the other options manually.
.IP \[bu] 2
If write performance is valued more than read it may be useful to enable
\f[B]direct_io\f[].
.IP \[bu] 2
Remember that some policies mixed with some functions may result in
strange behaviors.
Not that some of these behaviors and race conditions couldn\[aq]t happen
outside \f[B]mergerfs\f[] but that they are far more likely to occur on
account of attempt to merge together multiple sources of data which
could be out of sync due to the different policies.
.IP \[bu] 2
An example: Kodi (http://kodi.tv) and Plex (http://plex.tv) can
apparently use directory mtime (http://linux.die.net/man/2/stat) to more
efficiently determine whether or not to scan for new content rather than
simply performing a full scan.
If using the current default \f[B]getattr\f[] policy of \f[B]ff\f[] its
possible \f[B]Kodi\f[] will miss an update on account of it returning
the first directory found\[aq]s \f[B]stat\f[] info and its a later
directory on another mount which had the \f[B]mtime\f[] recently
updated.
To fix this you will want to set \f[B]func.getattr=newest\f[].
Remember though that this is just \f[B]stat\f[].
If the file is later \f[B]open\f[]\[aq]ed or \f[B]unlink\f[]\[aq]ed and
the policy is different for those then a completely different file or
directory could be acted on.
.IP \[bu] 2
Due to previously mentioned issues its generally best to set
\f[B]category\f[] wide policies rather than individual
\f[B]func\f[]\[aq]s.
This will help limit the confusion of tools such as
rsync (http://linux.die.net/man/1/rsync).
.SH Known Issues / Bugs
.SS Samba
.IP \[bu] 2
Moving files or directories between some directories on a SMB share fail
with IO errors.
.RS 2
.PP
Workaround: Copy the file/directory and then remove the original rather
than move.
.PP
This isn\[aq]t an issue with Samba but some SMB clients.
GVFS\-fuse v1.20.3 and prior (found in Ubuntu 14.04 among others) failed
to handle certain error codes correctly.
Particularly \f[B]STATUS_NOT_SAME_DEVICE\f[] which comes from the
\f[B]EXDEV\f[] which is returned by \f[B]rename\f[] when the call is
crossing mount points.
When a program gets an \f[B]EXDEV\f[] it needs to explicitly take an
alternate action to accomplish it\[aq]s goal.
In the case of \f[B]mv\f[] or similar it tries \f[B]rename\f[] and on
\f[B]EXDEV\f[] falls back to a manual copying of data between the two
locations and unlinking the source.
In these older versions of GVFS\-fuse if it received \f[B]EXDEV\f[] it
would translate that into \f[B]EIO\f[].
This would cause \f[B]mv\f[] or most any application attempting to move
files around on that SMB share to fail with a IO error.
.PP
GVFS\-fuse v1.22.0 (https://bugzilla.gnome.org/show_bug.cgi?id=734568)
and above fixed this issue but a large number of systems use the older
release.
On Ubuntu the version can be checked by issuing
\f[C]apt\-cache\ showpkg\ gvfs\-fuse\f[].
Most distros released in 2015 seem to have the updated release and will
work fine but older systems may not.
Upgrading gvfs\-fuse or the distro in general will address the problem.
.PP
In Apple\[aq]s MacOSX 10.9 they replaced Samba (client and server) with
their own product.
It appears their new client does not handle \f[B]EXDEV\f[] either and
responds similar to older release of gvfs on Linux.
.RE
.SS Supplemental groups
.IP \[bu] 2
Due to the overhead of
getgroups/setgroups (http://linux.die.net/man/2/setgroups) mergerfs
utilizes a cache.
This cache is opportunistic and per thread.
Each thread will query the supplemental groups for a user when that
particular thread needs to change credentials and will keep that data
for the lifetime of the mount or thread.
This means that if a user is added to a group it may not be picked up
without the restart of mergerfs.
However, since the high level FUSE API\[aq]s (at least the standard
version) thread pool dynamically grows and shrinks it\[aq]s possible
that over time a thread will be killed and later a new thread with no
cache will start and query the new data.
.RS 2
.PP
The gid cache uses fixed storage to simplify the design and be
compatible with older systems which may not have C++11 compilers (as the
original design required).
There is enough storage for 256 users\[aq] supplemental groups.
Each user is allowed upto 32 supplemental groups.
Linux >= 2.6.3 allows upto 65535 groups per user but most other *nixs
allow far less.
NFS allowing only 16.
The system does handle overflow gracefully.
If the user has more than 32 supplemental groups only the first 32 will
be used.
If more than 256 users are using the system when an uncached user is
found it will evict an existing user\[aq]s cache at random.
So long as there aren\[aq]t more than 256 active users this should be
fine.
If either value is too low for your needs you will have to modify
\f[C]gidcache.hpp\f[] to increase the values.
Note that doing so will increase the memory needed by each thread.
.RE
.SH FAQ
.PP
\f[I]It\[aq]s mentioned that there are some security issues with mhddfs.
What are they? How does mergerfs address them?\f[]
.PP
mhddfs (https://github.com/trapexit/mhddfs) tries to handle being run as
\f[B]root\f[] by calling
getuid() (https://github.com/trapexit/mhddfs/blob/cae96e6251dd91e2bdc24800b4a18a74044f6672/src/main.c#L319)
and if it returns \f[B]0\f[] then it will
chown (http://linux.die.net/man/1/chown) the file.
Not only is that a race condition but it doesn\[aq]t handle many other
situations.
Rather than attempting to simulate POSIX ACL behaviors the proper
behavior is to use seteuid (http://linux.die.net/man/2/seteuid) and
setegid (http://linux.die.net/man/2/setegid), become the user making the
original call and perform the action as them.
This is how mergerfs (https://github.com/trapexit/mergerfs) handles
things.
.PP
If you are familiar with POSIX standards you\[aq]ll know that this
behavior poses a problem.
\f[B]seteuid\f[] and \f[B]setegid\f[] affect the whole process and
\f[B]libfuse\f[] is multithreaded by default.
We\[aq]d need to lock access to \f[B]seteuid\f[] and \f[B]setegid\f[]
with a mutex so that the several threads aren\[aq]t stepping on one
another and files end up with weird permissions and ownership.
This however wouldn\[aq]t scale well.
With lots of calls the contention on that mutex would be extremely high.
Thankfully on Linux and OSX we have a better solution.
.PP
OSX has a non\-portable pthread
extension (https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man2/pthread_setugid_np.2.html)
for per\-thread user and group impersonation.
.PP
Linux does not support
pthread_setugid_np (https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man2/pthread_setugid_np.2.html)
but user and group IDs are a per\-thread attribute though documentation
on that fact or how to manipulate them is not well distributed.
From the \f[B]4.00\f[] release of the Linux man\-pages project for
setuid (http://man7.org/linux/man-pages/man2/setuid.2.html)
.RS
.PP
At the kernel level, user IDs and group IDs are a per\-thread attribute.
However, POSIX requires that all threads in a process share the same
credentials.
The NPTL threading implementation handles the POSIX requirements by
providing wrapper functions for the various system calls that change
process UIDs and GIDs.
These wrapper functions (including the one for setuid()) employ a
signal\-based technique to ensure that when one thread changes
credentials, all of the other threads in the process also change their
credentials.
For details, see nptl(7).
.RE
.PP
Turns out the setreuid syscalls apply only to the thread.
GLIBC hides this away using RT signals to inform all threads to change
credentials.
Taking after \f[B]Samba\f[] mergerfs uses
\f[B]syscall(SYS_setreuid,...)\f[] to set the callers credentials for
that thread only.
Jumping back to \f[B]root\f[] as necessary should escalated privileges
be needed (for instance: to clone paths).
.PP
For non\-Linux systems mergerfs uses a read\-write lock and changes
credentials only when necessary.
If multiple threads are to be user X then only the first one will need
to change the processes credentials.
So long as the other threads need to be user X they will take a readlock
allow multiple threads to share the credentials.
Once a request comes in to run as user Y that thread will attempt a
write lock and change to Y\[aq]s credentials when it can.
If the ability to give writers priority is supported then that flag will
be used so threads trying to change credentials don\[aq]t starve.
This isn\[aq]t the best solution but should work reasonably well.
As new platforms are supported if they offer per thread credentials
those APIs will be adopted.
.SH SUPPORT
.SS Issues with the software
.IP \[bu] 2
github.com: https://github.com/trapexit/mergerfs/issues
.IP \[bu] 2
email: trapexit\@spawn.link
.SS Support development
.IP \[bu] 2
Gratipay: https://gratipay.com/~trapexit
.IP \[bu] 2
BitCoin: 12CdMhEPQVmjz3SSynkAEuD5q9JmhTDCZA
.SH AUTHORS
Antonio SJ Musumeci <trapexit@spawn.link>.