Update README to point to docs, update project comparisons

mkdocs/docs/project_comparisons.md

@@ -2,9 +2,13 @@
 
 ## mhddfs
 
+* [https://romanrm.net/mhddfs](https://romanrm.net/mhddfs)
+
 mhddfs had not been updated in over a decade and has known stability
-and security issues. mergerfs provides a superset of mhddfs' features
-and offers better performance.
+and security issues. mergerfs provides a super set of mhddfs' features
+and offers better performance. In fact, as of 2020, the author of
+mhddfs has [moved to using
+mergerfs.](https://romanrm.net/mhddfs#update)
 
 Below is an example of mhddfs and mergerfs setup to work similarly.
 
@@ -15,76 +19,113 @@ Below is an example of mhddfs and mergerfs setup to work similarly.
 
 ## aufs
 
-aufs is abandoned and no longer available in most Linux distros.
+* [https://aufs.sourceforge.net](https://aufs.sourceforge.net)
+* [https://en.wikipedia.org/wiki/Aufs](https://en.wikipedia.org/wiki/Aufs)
+
+While aufs still is maintained it failed to be included in the
+mainline kernel and is no longer available in most Linux distros
+making it harder to get installed for the average user.
+
+While aufs can often offer better peak performance due to being
+primarily kernel based, mergerfs provides more configurability and is
+generally easier to use. mergerfs however does not offer the overlay /
+copy-on-write (CoW) features which aufs has.
+
 
-While aufs can offer better peak performance mergerfs provides more
-configurability and is generally easier to use. mergerfs however does
-not offer the overlay / copy-on-write (CoW) features which aufs has.
+## unionfs
 
+* [https://unionfs.filesystems.org](https://unionfs.filesystems.org)
 
-## Linux unionfs
+unionfs for Linux is a "stackable unification file system" which
+functions like many other union filesystems. unionfs has not been
+maintained and was last released for Linux v3.14 back in 2014.
 
-FILL IN
+Documentation is sparse so a comparison of features is not possible
+but given the lack of maintenance and support for modern kernels there
+is little reason to consider it as a solution.
 
 
 ## unionfs-fuse
 
-unionfs-fuse is more like aufs than mergerfs in that it offers overlay
-/ copy-on-write (CoW) features. If you're just looking to create a
-union of filesystems and want flexibility in file/directory placement
-then mergerfs offers that whereas unionfs-fuse is more for overlaying
-read/write filesystems over read-only ones. Largely unionfs-fuse has
-been replaced by overlayfs.
+* [https://github.com/rpodgorny/unionfs-fuse](https://github.com/rpodgorny/unionfs-fuse)
+
+unionfs-fuse is more like unionfs, aufs, and overlayfs than mergerfs
+in that it offers overlay / copy-on-write (CoW) features. If you're
+just looking to create a union of filesystems and want flexibility in
+file/directory placement then mergerfs offers that whereas
+unionfs-fuse is more for overlaying read/write filesystems over
+read-only ones.
+
+Since unionfs-fuse, as the name suggests, is a FUSE based technology
+it can be used without elevated privileges that kernel solutions such
+as unionfs, aufs, and overlayfs require.
 
 
 ## overlayfs
 
-overlayfs is similar to aufs and unionfs-fuse in that it also is
-primarily used to layer a read/write filesystem over one or more
-read-only filesystems. It does not have the ability to spread
-files/directories across numerous filesystems. It is the successor to
-unionfs, unionfs-fuse, and aufs and widely used by container platforms
-such as Docker.
+* [https://docs.kernel.org/filesystems/overlayfs.html](https://docs.kernel.org/filesystems/overlayfs.html)
+
+overlayfs is effectively the successor to unionfs, unionfs-fuse, and
+aufs and is widely used by Linux container platforms such as Docker and
+Podman. It was developed and is maintained by the same developer who
+created FUSE.
 
-If your usecase is layering a writable filesystem on top of readonly
-filesystems then you should look first to overlayfs.
+If your use case is layering a writable filesystem on top of read-only
+filesystems then you should look first to overlayfs. Its feature set
+however is very different from mergerfs and solve different problems.
 
 
-## RAID0, JBOD, drive concatenation, striping
+## RAID0, JBOD, SPAN, drive concatenation, striping
 
-With simple JBOD / drive concatenation / stripping / RAID0 a single
-drive failure will result in full pool failure. mergerfs performs a
-similar function without the possibility of catastrophic failure and
-the difficulties in recovery. Drives may fail but all other
-filesystems and their data will continue to be accessible.
+* [RAID0](https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_0)
+* [JBOD](https://en.wikipedia.org/wiki/Non-RAID_drive_architectures#JBOD)
+* [SPAN](https://en.wikipedia.org/wiki/Non-RAID_drive_architectures#Concatenation_(SPAN,_BIG))
+* [striping](https://en.wikipedia.org/wiki/Data_striping)
 
-The main practical difference with mergerfs is the fact you don't
-actually have contiguous space as large as if you used those other
-technologies. Meaning you can't create a 2TB file on a pool of 2 1TB
-filesystems.
+These are block device technologies which in some form aggregate
+devices into what appears to be a singular device on which a
+traditional filesystem can be used. The filesystem has no
+understanding of the underlying block layout and should one of those
+underlying devices fail or be removed the filesystem will be missing
+that chunk which could contain critical information and the whole
+filesystem may become unrecoverable. Even if the data from the
+filesystem is recoverable it will take using specialized tooling to do
+so.
+
+In contrast, with mergerfs you can format devices as one normally
+would or take existing filesystems and then combine them in a pool to
+aggregate their storage. The failure of any one device will have no
+impact on the other devices. The downside to mergerfs' technique is
+the fact you don't actually have contiguous space as large as if you
+used those other technologies. Meaning you can't create a file greater
+than 1TB on a pool of 2 1TB filesystems.
 
 
 ## UnRAID
 
+* [https://unraid.net](https://unraid.net)
+
 UnRAID is a full OS and offers a (FUSE based?) filesystem which
 provides a union of filesystems like mergerfs but with the addition of
 live parity calculation and storage. Outside parity calculations
-mergerfs offers more features and due to the lack of realtime parity
-calculation can have high peak performance. Some users also prefer an
-open source solution.
+mergerfs offers more features and due to the lack of real-time parity
+calculation can have higher peak performance. Some users also prefer
+an open source solution.
 
 For semi-static data mergerfs + [SnapRaid](http://www.snapraid.it)
-provides a similar solution.
+provides a similar, but not real-time, solution.
 
 
 ## ZFS
 
+* [https://en.wikipedia.org/wiki/ZFS](https://en.wikipedia.org/wiki/ZFS)
+
 mergerfs is very different from ZFS. mergerfs is intended to provide
 flexible pooling of arbitrary filesystems (local or remote), of
-arbitrary sizes, and arbitrary filesystems. Primarily in `write once, read
-many` usecases such as bulk media storage. Where data integrity and
-backup is managed in other ways. In those usecases ZFS can introduce a
-number of costs and limitations as described
+arbitrary sizes, and arbitrary filesystems. Particularly in `write
+once, read many` use cases such as bulk media storage. Where data
+integrity and backup is managed in other ways. In those use cases ZFS
+can introduce a number of costs and limitations as described
 [here](http://louwrentius.com/the-hidden-cost-of-using-zfs-for-your-home-nas.html),
 [here](https://markmcb.com/2020/01/07/five-years-of-btrfs/), and
 [here](https://utcc.utoronto.ca/~cks/space/blog/solaris/ZFSWhyNoRealReshaping).
@@ -92,6 +133,8 @@ number of costs and limitations as described
 
 ## StableBit's DrivePool
 
+* [https://stablebit.com](https://stablebit.com)
+
 DrivePool works only on Windows so not as common an alternative as
 other Linux solutions. If you want to use Windows then DrivePool is a
 good option. Functionally the two projects work a bit
@@ -115,8 +158,13 @@ mergerfs a ISC licensed open source project.
 
 ## Plan9 binds
 
+* [https://en.wikipedia.org/wiki/Plan_9_from_Bell_Labs#Union_directories_and_namespaces](https://en.wikipedia.org/wiki/Plan_9_from_Bell_Labs#Union_directories_and_namespaces)
+
 Plan9 has the native ability to bind multiple paths/filesystems
-together which can be compared to a simplified union filesystem. Such
-bind mounts choose files in a "first found" in the order they are
-listed similar to mergerfs' `ff` policy. File creation is limited
-to... FILL ME IN. REFERENCE DOCS.
+together to create a setup similar to simplified union
+filesystem. Such bind mounts choose files in a "first found" in the
+order they are listed similar to mergerfs' `ff` policy. Similar, when
+creating a file it will be created on the first directory in the
+union.
+
+Plan 9 isn't a widely used OS so this comparison is mostly academic.