* **defaults**: a shortcut for FUSE's **atomic_o_trunc**, **auto_cache**, **big_writes**, **default_permissions**, **splice_move**, **splice_read**, and **splice_write**. These options seem to provide the best performance.
* **direct_io**: causes FUSE to bypass caching which can increase write speeds at the detriment of reads. Note that not enabling `direct_io` will cause double caching of files and therefore less memory for caching generally. However, `mmap` does not work when `direct_io` is enabled.
* **minfreespace**: the minimum space value used for creation policies. Understands 'K', 'M', and 'G' to represent kilobyte, megabyte, and gigabyte respectively. (default: 4G)
* **moveonenospc**: when enabled (set to **true**) if a **write** fails with **ENOSPC** or **EDQUOT** a scan of all drives will be done looking for the drive with most free space which is at least the size of the file plus the amount which failed to write. An attempt to move the file to that drive will occur (keeping all metadata possible) and if successful the original is unlinked and the write retried. (default: false)
* **minfreespace=value**: the minimum space value used for creation policies. Understands 'K', 'M', and 'G' to represent kilobyte, megabyte, and gigabyte respectively. (default: 4G)
* **moveonenospc=true|false**: when enabled (set to **true**) if a **write** fails with **ENOSPC** or **EDQUOT** a scan of all drives will be done looking for the drive with most free space which is at least the size of the file plus the amount which failed to write. An attempt to move the file to that drive will occur (keeping all metadata possible) and if successful the original is unlinked and the write retried. (default: false)
* **use_ino**: causes mergerfs to supply file/directory inodes rather than libfuse. While not a default it is generally recommended it be enabled so that hard linked files share the same inode value.
* **dropcacheonclose**: when a file is requested to be closed call `posix_fadvise` on it first to instruct the kernel that we no longer need the data and it can drop its cache. Recommended when **direct_io** is not enabled to limit double caching. (default: false)
* **symlinkify**: when enabled (set to **true**) and a file is not writable and its mtime or ctime is older than **symlinkify_timeout** files will be reported as symlinks to the original files. Please read more below before using. (default: false)
* **symlinkify_timeout**: time to wait, in seconds, to activate the **symlinkify** behavior. (default: 3600)
* **nullrw**: turns reads and writes into no-ops. The request will succeed but do nothing. Useful for benchmarking mergerfs. (default: false)
* **ignorepponrename**: ignore path preserving on rename. Typically rename and link act differently depending on the policy of `create` (read below). Enabling this will cause rename and link to always use the non-path preserving behavior. This means files, when renamed or linked, will stay on the same drive.
* **threads**: number of threads to use in multithreaded mode. When set to zero (the default) it will attempt to discover and use the number of logical cores. If the lookup fails it will fall back to using 4. If the thread count is set negative it will look up the number of cores then divide by the absolute value. ie. threads=-2 on an 8 core machine will result in 8 / 2 = 4 threads. There will always be at least 1 thread. NOTE: higher number of threads increases parallelism but usually decreases throughput.
* **fsname**: sets the name of the filesystem as seen in **mount**, **df**, etc. Defaults to a list of the source paths concatenated together with the longest common prefix removed.
* **dropcacheonclose=true|false**: when a file is requested to be closed call `posix_fadvise` on it first to instruct the kernel that we no longer need the data and it can drop its cache. Recommended when **direct_io** is not enabled to limit double caching. (default: false)
* **symlinkify=true|false**: when enabled (set to **true**) and a file is not writable and its mtime or ctime is older than **symlinkify_timeout** files will be reported as symlinks to the original files. Please read more below before using. (default: false)
* **symlinkify_timeout=value**: time to wait, in seconds, to activate the **symlinkify** behavior. (default: 3600)
* **nullrw=true|false**: turns reads and writes into no-ops. The request will succeed but do nothing. Useful for benchmarking mergerfs. (default: false)
* **ignorepponrename=true|false**: ignore path preserving on rename. Typically rename and link act differently depending on the policy of `create` (read below). Enabling this will cause rename and link to always use the non-path preserving behavior. This means files, when renamed or linked, will stay on the same drive. (default: false)
* **threads=num**: number of threads to use in multithreaded mode. When set to zero (the default) it will attempt to discover and use the number of logical cores. If the lookup fails it will fall back to using 4. If the thread count is set negative it will look up the number of cores then divide by the absolute value. ie. threads=-2 on an 8 core machine will result in 8 / 2 = 4 threads. There will always be at least 1 thread. NOTE: higher number of threads increases parallelism but usually decreases throughput. (default: number of cores)
* **fsname=name**: sets the name of the filesystem as seen in **mount**, **df**, etc. Defaults to a list of the source paths concatenated together with the longest common prefix removed.
* **func.<func>=<policy>**: sets the specific FUSE function's policy. See below for the list of value types. Example: **func.getattr=newest**
* **category.<category>=<policy>**: Sets policy of all FUSE functions in the provided category. Example: **category.create=mfs**
@ -132,7 +132,7 @@ Due to FUSE limitations **ioctl** behaves differently if its acting on a directo
Policies, as described below, are of two core types. `path preserving` and `non-path preserving`.
All policies which start with `ep` (**epff**, **eplfs**, **eplus**, **epmfs**, **eprand**) are `path preserving'. `ep` stands for 'existing path`.
All policies which start with `ep` (**epff**, **eplfs**, **eplus**, **epmfs**, **eprand**) are `path preserving`. `ep` stands for `existing path`.
As the descriptions explain a path preserving policy will only consider drives where the relative path being accessed already exists.
Antonio SJ Musumeci
7 years ago
GitHub