mergerfs/man/mergerfs.1

.\"t
.\" Automatically generated by Pandoc 1.19.2.4
.\"
.TH "mergerfs" "1" "2019\-01\-24" "mergerfs user manual" ""
.hy
.SH NAME
.PP
mergerfs \- a featureful union filesystem
.SH SYNOPSIS
.PP
mergerfs \-o<options> <branches> <mountpoint>
.SH DESCRIPTION
.PP
\f[B]mergerfs\f[] is a union filesystem geared towards simplifying
storage and management of files across numerous commodity storage
devices.
It is similar to \f[B]mhddfs\f[], \f[B]unionfs\f[], and \f[B]aufs\f[].
.SH FEATURES
.IP \[bu] 2
Runs in userspace (FUSE)
.IP \[bu] 2
Configurable behaviors
.IP \[bu] 2
Support for extended attributes (xattrs)
.IP \[bu] 2
Support for file attributes (chattr)
.IP \[bu] 2
Runtime configurable (via xattrs)
.IP \[bu] 2
Safe to run as root
.IP \[bu] 2
Opportunistic credential caching
.IP \[bu] 2
Works with heterogeneous filesystem types
.IP \[bu] 2
Handling of writes to full drives (transparently move file to drive with
capacity)
.IP \[bu] 2
Handles pool of read\-only and read/write drives
.IP \[bu] 2
Turn read\-only files into symlinks to increase read performance
.SH How it works
.PP
mergerfs logically merges multiple paths together.
Think a union of sets.
The file/s or directory/s acted on or presented through mergerfs are
based on the policy chosen for that particular action.
Read more about policies below.
.IP
.nf
\f[C]
A\ \ \ \ \ \ \ \ \ +\ \ \ \ \ \ B\ \ \ \ \ \ \ \ =\ \ \ \ \ \ \ C
/disk1\ \ \ \ \ \ \ \ \ \ \ /disk2\ \ \ \ \ \ \ \ \ \ \ /merged
|\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |
+\-\-\ /dir1\ \ \ \ \ \ \ \ +\-\-\ /dir1\ \ \ \ \ \ \ \ +\-\-\ /dir1
|\ \ \ |\ \ \ \ \ \ \ \ \ \ \ \ |\ \ \ |\ \ \ \ \ \ \ \ \ \ \ \ |\ \ \ |
|\ \ \ +\-\-\ file1\ \ \ \ |\ \ \ +\-\-\ file2\ \ \ \ |\ \ \ +\-\-\ file1
|\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |\ \ \ +\-\-\ file3\ \ \ \ |\ \ \ +\-\-\ file2
+\-\-\ /dir2\ \ \ \ \ \ \ \ |\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |\ \ \ +\-\-\ file3
|\ \ \ |\ \ \ \ \ \ \ \ \ \ \ \ +\-\-\ /dir3\ \ \ \ \ \ \ \ |
|\ \ \ +\-\-\ file4\ \ \ \ \ \ \ \ |\ \ \ \ \ \ \ \ \ \ \ \ +\-\-\ /dir2
|\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ +\-\-\ file5\ \ \ |\ \ \ |
+\-\-\ file6\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |\ \ \ +\-\-\ file4
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ +\-\-\ /dir3
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |\ \ \ |
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |\ \ \ +\-\-\ file5
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ |
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ +\-\-\ file6
\f[]
.fi
.PP
mergerfs does \f[B]not\f[] support the copy\-on\-write (CoW) behavior
found in \f[B]aufs\f[] and \f[B]overlayfs\f[].
You can \f[B]not\f[] mount a read\-only filesystem and write to it.
However, mergerfs will ignore read\-only drives when creating new files
so you can mix rw and ro drives.
.SH OPTIONS
.SS mount options
.IP \[bu] 2
\f[B]defaults\f[]: a shortcut for FUSE\[aq]s \f[B]atomic_o_trunc\f[],
\f[B]auto_cache\f[], \f[B]big_writes\f[], \f[B]default_permissions\f[],
\f[B]splice_move\f[], \f[B]splice_read\f[], and \f[B]splice_write\f[].
These options seem to provide the best performance.
.IP \[bu] 2
\f[B]allow_other\f[]: a libfuse option which allows users besides the
one which ran mergerfs to see the filesystem.
This is required for most use\-cases.
.IP \[bu] 2
\f[B]direct_io\f[]: causes FUSE to bypass caching which can increase
write speeds at the detriment of reads.
Note that not enabling \f[C]direct_io\f[] will cause double caching of
files and therefore less memory for caching generally (enable
\f[B]dropcacheonclose\f[] to help with this problem).
However, \f[C]mmap\f[] does not work when \f[C]direct_io\f[] is enabled.
.IP \[bu] 2
\f[B]minfreespace=value\f[]: the minimum space value used for creation
policies.
Understands \[aq]K\[aq], \[aq]M\[aq], and \[aq]G\[aq] to represent
kilobyte, megabyte, and gigabyte respectively.
(default: 4G)
.IP \[bu] 2
\f[B]moveonenospc=true|false\f[]: when enabled (set to \f[B]true\f[]) if
a \f[B]write\f[] fails with \f[B]ENOSPC\f[] or \f[B]EDQUOT\f[] a scan of
all drives will be done looking for the drive with the most free space
which is at least the size of the file plus the amount which failed to
write.
An attempt to move the file to that drive will occur (keeping all
metadata possible) and if successful the original is unlinked and the
write retried.
(default: false)
.IP \[bu] 2
\f[B]use_ino\f[]: causes mergerfs to supply file/directory inodes rather
than libfuse.
While not a default it is generally recommended it be enabled so that
hard linked files share the same inode value.
.IP \[bu] 2
\f[B]hard_remove\f[]: force libfuse to immedately remove files when
unlinked.
This will keep the \f[C]\&.fuse_hidden\f[] files from showing up but if
software uses an opened but unlinked file in certain ways it could
result in errors.
.IP \[bu] 2
\f[B]dropcacheonclose=true|false\f[]: when a file is requested to be
closed call \f[C]posix_fadvise\f[] on it first to instruct the kernel
that we no longer need the data and it can drop its cache.
Recommended when \f[B]direct_io\f[] is not enabled to limit double
caching.
(default: false)
.IP \[bu] 2
\f[B]symlinkify=true|false\f[]: when enabled (set to \f[B]true\f[]) and
a file is not writable and its mtime or ctime is older than
\f[B]symlinkify_timeout\f[] files will be reported as symlinks to the
original files.
Please read more below before using.
(default: false)
.IP \[bu] 2
\f[B]symlinkify_timeout=value\f[]: time to wait, in seconds, to activate
the \f[B]symlinkify\f[] behavior.
(default: 3600)
.IP \[bu] 2
\f[B]nullrw=true|false\f[]: turns reads and writes into no\-ops.
The request will succeed but do nothing.
Useful for benchmarking mergerfs.
(default: false)
.IP \[bu] 2
\f[B]ignorepponrename=true|false\f[]: ignore path preserving on rename.
Typically rename and link act differently depending on the policy of
\f[C]create\f[] (read below).
Enabling this will cause rename and link to always use the non\-path
preserving behavior.
This means files, when renamed or linked, will stay on the same drive.
(default: false)
.IP \[bu] 2
\f[B]security_capability=true|false\f[]: If false return ENOATTR when
xattr security.capability is queried.
(default: true)
.IP \[bu] 2
\f[B]xattr=passthrough|noattr|nosys\f[]: Runtime control of xattrs.
Default is to passthrough xattr requests.
\[aq]noattr\[aq] will short circuit as if nothing exists.
\[aq]nosys\[aq] will respond with ENOSYS as if xattrs are not supported
or disabled.
(default: passthrough)
.IP \[bu] 2
\f[B]link_cow=true|false\f[]: When enabled if a regular file is opened
which has a link count > 1 it will copy the file to a temporary file and
rename over the original.
Breaking the link and providing a basic copy\-on\-write function similar
to cow\-shell.
(default: false)
.IP \[bu] 2
\f[B]statfs=base|full\f[]: Controls how statfs works.
\[aq]base\[aq] means it will always use all branches in statfs
calculations.
\[aq]full\[aq] is in effect path preserving and only includes drives
where the path exists.
(default: base)
.IP \[bu] 2
\f[B]statfs_ignore=none|ro|nc\f[]: \[aq]ro\[aq] will cause statfs
calculations to ignore available space for branches mounted or tagged as
\[aq]read\-only\[aq] or \[aq]no create\[aq].
\[aq]nc\[aq] will ignore available space for branches tagged as \[aq]no
create\[aq].
(default: none)
.IP \[bu] 2
\f[B]threads=num\f[]: number of threads to use in multithreaded mode.
When set to zero (the default) it will attempt to discover and use the
number of logical cores.
If the lookup fails it will fall back to using 4.
If the thread count is set negative it will look up the number of cores
then divide by the absolute value.
ie.
threads=\-2 on an 8 core machine will result in 8 / 2 = 4 threads.
There will always be at least 1 thread.
NOTE: higher number of threads increases parallelism but usually
decreases throughput.
(default: number of cores) \f[I]NOTE2:\f[] the option is unavailable
when built with system libfuse.
.IP \[bu] 2
\f[B]fsname=name\f[]: sets the name of the filesystem as seen in
\f[B]mount\f[], \f[B]df\f[], etc.
Defaults to a list of the source paths concatenated together with the
longest common prefix removed.
.IP \[bu] 2
\f[B]func.<func>=<policy>\f[]: sets the specific FUSE function\[aq]s
policy.
See below for the list of value types.
Example: \f[B]func.getattr=newest\f[]
.IP \[bu] 2
\f[B]category.<category>=<policy>\f[]: Sets policy of all FUSE functions
in the provided category.
Example: \f[B]category.create=mfs\f[]
.IP \[bu] 2
\f[B]cache.open=<int>\f[]: \[aq]open\[aq] policy cache timeout in
seconds.
(default: 0)
.IP \[bu] 2
\f[B]cache.statfs=<int>\f[]: \[aq]statfs\[aq] cache timeout in seconds.
(default: 0)
.PP
\f[B]NOTE:\f[] Options are evaluated in the order listed so if the
options are \f[B]func.rmdir=rand,category.action=ff\f[] the
\f[B]action\f[] category setting will override the \f[B]rmdir\f[]
setting.
.SS branches
.PP
The \[aq]branches\[aq] (formerly \[aq]srcmounts\[aq]) argument is a
colon (\[aq]:\[aq]) delimited list of paths to be pooled together.
It does not matter if the paths are on the same or different drives nor
does it matter the filesystem.
Used and available space will not be duplicated for paths on the same
device and any features which aren\[aq]t supported by the underlying
filesystem (such as file attributes or extended attributes) will return
the appropriate errors.
.PP
To make it easier to include multiple branches mergerfs supports
globbing (http://linux.die.net/man/7/glob).
\f[B]The globbing tokens MUST be escaped when using via the shell else
the shell itself will apply the glob itself.\f[]
.PP
Each branch can have a suffix of \f[C]=RW\f[] (read / write),
\f[C]=RO\f[] (read\-only), or \f[C]=NC\f[] (no create).
These suffixes work with globs as well and will apply to each path
found.
\f[C]RW\f[] is the default behavior and those paths will be eligible for
all policy categories.
\f[C]RO\f[] will exclude those paths from \f[C]create\f[] and
\f[C]action\f[] policies (just as a filesystem being mounted \f[C]ro\f[]
would).
\f[C]NC\f[] will exclude those paths from \f[C]create\f[] policies (you
can\[aq]t create but you can change / delete).
.IP
.nf
\f[C]
$\ mergerfs\ \-o\ defaults,allow_other,use_ino\ /mnt/disk\\*:/mnt/cdrom\ /media/drives
\f[]
.fi
.PP
The above line will use all mount points in /mnt prefixed with
\f[B]disk\f[] and the \f[B]cdrom\f[].
.PP
To have the pool mounted at boot or otherwise accessable from related
tools use \f[B]/etc/fstab\f[].
.IP
.nf
\f[C]
#\ <file\ system>\ \ \ \ \ \ \ \ <mount\ point>\ \ <type>\ \ \ \ \ \ \ \ \ <options>\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ <dump>\ \ <pass>
/mnt/disk*:/mnt/cdrom\ \ /media/drives\ \ fuse.mergerfs\ \ defaults,allow_other,use_ino\ \ \ 0\ \ \ \ \ \ \ 0
\f[]
.fi
.PP
\f[B]NOTE:\f[] the globbing is done at mount or xattr update time (see
below).
If a new directory is added matching the glob after the fact it will not
be automatically included.
.PP
\f[B]NOTE:\f[] for mounting via \f[B]fstab\f[] to work you must have
\f[B]mount.fuse\f[] installed.
For Ubuntu/Debian it is included in the \f[B]fuse\f[] package.
.SS symlinkify
.PP
Due to the levels of indirection introduced by mergerfs and the
underlying technology FUSE there can be varying levels of performance
degredation.
This feature will turn non\-directories which are not writable into
symlinks to the original file found by the \f[C]readlink\f[] policy
after the mtime and ctime are older than the timeout.
.PP
\f[B]WARNING:\f[] The current implementation has a known issue in which
if the file is open and being used when the file is converted to a
symlink then the application which has that file open will receive an
error when using it.
This is unlikely to occur in practice but is something to keep in mind.
.PP
\f[B]WARNING:\f[] Some backup solutions, such as CrashPlan, do not
backup the target of a symlink.
If using this feature it will be necessary to point any backup software
to the original drives or configure the software to follow symlinks if
such an option is available.
Alternatively create two mounts.
One for backup and one for general consumption.
.SS nullrw
.PP
Due to how FUSE works there is an overhead to all requests made to a
FUSE filesystem.
Meaning that even a simple passthrough will have some slowdown.
However, generally the overhead is minimal in comparison to the cost of
the underlying I/O.
By disabling the underlying I/O we can test the theoretical performance
boundries.
.PP
By enabling \f[C]nullrw\f[] mergerfs will work as it always does
\f[B]except\f[] that all reads and writes will be no\-ops.
A write will succeed (the size of the write will be returned as if it
were successful) but mergerfs does nothing with the data it was given.
Similarly a read will return the size requested but won\[aq]t touch the
buffer.
.PP
Example:
.IP
.nf
\f[C]
$\ dd\ if=/dev/zero\ of=/path/to/mergerfs/mount/benchmark\ ibs=1M\ obs=512\ count=1024\ conv=fdatasync
1024+0\ records\ in
2097152+0\ records\ out
1073741824\ bytes\ (1.1\ GB,\ 1.0\ GiB)\ copied,\ 15.4067\ s,\ 69.7\ MB/s

$\ dd\ if=/dev/zero\ of=/path/to/mergerfs/mount/benchmark\ ibs=1M\ obs=1M\ count=1024\ conv=fdatasync
1024+0\ records\ in
1024+0\ records\ out
1073741824\ bytes\ (1.1\ GB,\ 1.0\ GiB)\ copied,\ 0.219585\ s,\ 4.9\ GB/s

$\ dd\ if=/path/to/mergerfs/mount/benchmark\ of=/dev/null\ bs=512\ count=102400\ conv=fdatasync
102400+0\ records\ in
102400+0\ records\ out
52428800\ bytes\ (52\ MB,\ 50\ MiB)\ copied,\ 0.757991\ s,\ 69.2\ MB/s

$\ dd\ if=/path/to/mergerfs/mount/benchmark\ of=/dev/null\ bs=1M\ count=1024\ conv=fdatasync
1024+0\ records\ in
1024+0\ records\ out
1073741824\ bytes\ (1.1\ GB,\ 1.0\ GiB)\ copied,\ 0.18405\ s,\ 5.8\ GB/s
\f[]
.fi
.PP
It\[aq]s important to test with different \f[C]obs\f[] (output block
size) values since the relative overhead is greater with smaller values.
As you can see above the size of a read or write can massively impact
theoretical performance.
If an application performs much worse through mergerfs it could very
well be that it doesn\[aq]t optimally size its read and write requests.
In such cases contact the mergerfs author so it can be investigated.
.SS xattr
.PP
Runtime extended attribute support can be managed via the \f[C]xattr\f[]
option.
By default it will passthrough any xattr calls.
Given xattr support is rarely used and can have significant performance
implications mergerfs allows it to be disabled at runtime.
.PP
\f[C]noattr\f[] will cause mergerfs to short circuit all xattr calls and
return ENOATTR where appropriate.
mergerfs still gets all the requests but they will not be forwarded on
to the underlying filesystems.
The runtime control will still function in this mode.
.PP
\f[C]nosys\f[] will cause mergerfs to return ENOSYS for any xattr call.
The difference with \f[C]noattr\f[] is that the kernel will cache this
fact and itself short circuit future calls.
This will be more efficient than \f[C]noattr\f[] but will cause
mergerfs\[aq] runtime control via the hidden file to stop working.
.SH FUNCTIONS / POLICIES / CATEGORIES
.PP
The POSIX filesystem API is made up of a number of functions.
\f[B]creat\f[], \f[B]stat\f[], \f[B]chown\f[], etc.
In mergerfs most of the core functions are grouped into 3 categories:
\f[B]action\f[], \f[B]create\f[], and \f[B]search\f[].
These functions and categories can be assigned a policy which dictates
what file or directory is chosen when performing that behavior.
Any policy can be assigned to a function or category though some may not
be very useful in practice.
For instance: \f[B]rand\f[] (random) may be useful for file creation
(create) but could lead to very odd behavior if used for \f[C]chmod\f[]
if there were more than one copy of the file.
.PP
Some functions, listed in the category \f[C]N/A\f[] below, can not be
assigned the normal policies.
All functions which work on file handles use the handle which was
acquired by \f[C]open\f[] or \f[C]create\f[].
\f[C]readdir\f[] has no real need for a policy given the purpose is
merely to return a list of entries in a directory.
\f[C]statfs\f[]\[aq]s behavior can be modified via other options.
.PP
When using policies which are based on a branch\[aq]s available space
the base path provided is used.
Not the full path to the file in question.
Meaning that sub mounts won\[aq]t be considered in the space
calculations.
The reason is that it doesn\[aq]t really work for non\-path preserving
policies and can lead to non\-obvious behaviors.
.SS Function / Category classifications
.PP
.TS
tab(@);
lw(7.9n) lw(62.1n).
T{
Category
T}@T{
FUSE Functions
T}
_
T{
action
T}@T{
chmod, chown, link, removexattr, rename, rmdir, setxattr, truncate,
unlink, utimens
T}
T{
create
T}@T{
create, mkdir, mknod, symlink
T}
T{
search
T}@T{
access, getattr, getxattr, ioctl, listxattr, open, readlink
T}
T{
N/A
T}@T{
fallocate, fgetattr, fsync, ftruncate, ioctl, read, readdir, release,
statfs, write
T}
.TE
.PP
In cases where something may be searched (to confirm a directory exists
across all source mounts) \f[B]getattr\f[] will be used.
.SS Path Preservation
.PP
Policies, as described below, are of two basic types.
\f[C]path\ preserving\f[] and \f[C]non\-path\ preserving\f[].
.PP
All policies which start with \f[C]ep\f[] (\f[B]epff\f[],
\f[B]eplfs\f[], \f[B]eplus\f[], \f[B]epmfs\f[], \f[B]eprand\f[]) are
\f[C]path\ preserving\f[].
\f[C]ep\f[] stands for \f[C]existing\ path\f[].
.PP
A path preserving policy will only consider drives where the relative
path being accessed already exists.
.PP
When using non\-path preserving policies paths will be cloned to target
drives as necessary.
.SS Filters
.PP
Policies basically search branches and create a list of files / paths
for functions to work on.
The policy is responsible for filtering and sorting.
The policy type defines the sorting but filtering is mostly uniform as
described below.
.IP \[bu] 2
No \f[B]search\f[] policies filter.
.IP \[bu] 2
All \f[B]action\f[] policies will filter out branches which are mounted
\f[B]read\-only\f[] or tagged as \f[B]RO (read\-only)\f[].
.IP \[bu] 2
All \f[B]create\f[] policies will filter out branches which are mounted
\f[B]read\-only\f[], tagged \f[B]RO (read\-only)\f[] or \f[B]NC (no
create)\f[], or has available space less than \f[C]minfreespace\f[].
.PP
If all branches are filtered an error will be returned.
Typically \f[B]EROFS\f[] or \f[B]ENOSPC\f[] depending on the reasons.
.SS Policy descriptions
.PP
.TS
tab(@);
lw(16.6n) lw(53.4n).
T{
Policy
T}@T{
Description
T}
_
T{
all
T}@T{
Search category: same as \f[B]epall\f[].
Action category: same as \f[B]epall\f[].
Create category: for \f[B]mkdir\f[], \f[B]mknod\f[], and
\f[B]symlink\f[] it will apply to all branches.
\f[B]create\f[] works like \f[B]ff\f[].
T}
T{
epall (existing path, all)
T}@T{
Search category: same as \f[B]epff\f[] (but more expensive because it
doesn\[aq]t stop after finding a valid branch).
Action category: apply to all found.
Create category: for \f[B]mkdir\f[], \f[B]mknod\f[], and
\f[B]symlink\f[] it will apply to all found.
\f[B]create\f[] works like \f[B]epff\f[] (but more expensive because it
doesn\[aq]t stop after finding a valid branch).
T}
T{
epff (existing path, first found)
T}@T{
Given the order of the branches, as defined at mount time or configured
at runtime, act on the first one found where the relative path exists.
T}
T{
eplfs (existing path, least free space)
T}@T{
Of all the branches on which the relative path exists choose the drive
with the least free space.
T}
T{
eplus (existing path, least used space)
T}@T{
Of all the branches on which the relative path exists choose the drive
with the least used space.
T}
T{
epmfs (existing path, most free space)
T}@T{
Of all the branches on which the relative path exists choose the drive
with the most free space.
T}
T{
eprand (existing path, random)
T}@T{
Calls \f[B]epall\f[] and then randomizes.
T}
T{
erofs
T}@T{
Exclusively return \f[B]\-1\f[] with \f[B]errno\f[] set to
\f[B]EROFS\f[] (read\-only filesystem).
T}
T{
ff (first found)
T}@T{
Search category: same as \f[B]epff\f[].
Action category: same as \f[B]epff\f[].
Create category: Given the order of the drives, as defined at mount time
or configured at runtime, act on the first one found.
T}
T{
lfs (least free space)
T}@T{
Search category: same as \f[B]eplfs\f[].
Action category: same as \f[B]eplfs\f[].
Create category: Pick the drive with the least available free space.
T}
T{
lus (least used space)
T}@T{
Search category: same as \f[B]eplus\f[].
Action category: same as \f[B]eplus\f[].
Create category: Pick the drive with the least used space.
T}
T{
mfs (most free space)
T}@T{
Search category: same as \f[B]epmfs\f[].
Action category: same as \f[B]epmfs\f[].
Create category: Pick the drive with the most available free space.
T}
T{
newest
T}@T{
Pick the file / directory with the largest mtime.
T}
T{
rand (random)
T}@T{
Calls \f[B]all\f[] and then randomizes.
T}
.TE
.SS Defaults
.PP
.TS
tab(@);
l l.
T{
Category
T}@T{
Policy
T}
_
T{
action
T}@T{
epall
T}
T{
create
T}@T{
epmfs
T}
T{
search
T}@T{
ff
T}
.TE
.SS rename & link
.PP
\f[B]NOTE:\f[] If you\[aq]re receiving errors from software when files
are moved / renamed / linked then you should consider changing the
create policy to one which is \f[B]not\f[] path preserving, enabling
\f[C]ignorepponrename\f[], or contacting the author of the offending
software and requesting that \f[C]EXDEV\f[] be properly handled.
.PP
\f[C]rename\f[] and \f[C]link\f[] are tricky functions in a union
filesystem.
\f[C]rename\f[] only works within a single filesystem or device.
If a rename can\[aq]t be done atomically due to the source and
destination paths existing on different mount points it will return
\f[B]\-1\f[] with \f[B]errno = EXDEV\f[] (cross device).
So if a \f[C]rename\f[]\[aq]s source and target are on different drives
within the pool it creates an issue.
.PP
Originally mergerfs would return EXDEV whenever a rename was requested
which was cross directory in any way.
This made the code simple and was technically complient with POSIX
requirements.
However, many applications fail to handle EXDEV at all and treat it as a
normal error or otherwise handle it poorly.
Such apps include: gvfsd\-fuse v1.20.3 and prior, Finder / CIFS/SMB
client in Apple OSX 10.9+, NZBGet, Samba\[aq]s recycling bin feature.
.PP
As a result a compromise was made in order to get most software to work
while still obeying mergerfs\[aq] policies.
Below is the basic logic.
.IP \[bu] 2
If using a \f[B]create\f[] policy which tries to preserve directory
paths (epff,eplfs,eplus,epmfs)
.IP \[bu] 2
Using the \f[B]rename\f[] policy get the list of files to rename
.IP \[bu] 2
For each file attempt rename:
.RS 2
.IP \[bu] 2
If failure with ENOENT run \f[B]create\f[] policy
.IP \[bu] 2
If create policy returns the same drive as currently evaluating then
clone the path
.IP \[bu] 2
Re\-attempt rename
.RE
.IP \[bu] 2
If \f[B]any\f[] of the renames succeed the higher level rename is
considered a success
.IP \[bu] 2
If \f[B]no\f[] renames succeed the first error encountered will be
returned
.IP \[bu] 2
On success:
.RS 2
.IP \[bu] 2
Remove the target from all drives with no source file
.IP \[bu] 2
Remove the source from all drives which failed to rename
.RE
.IP \[bu] 2
If using a \f[B]create\f[] policy which does \f[B]not\f[] try to
preserve directory paths
.IP \[bu] 2
Using the \f[B]rename\f[] policy get the list of files to rename
.IP \[bu] 2
Using the \f[B]getattr\f[] policy get the target path
.IP \[bu] 2
For each file attempt rename:
.RS 2
.IP \[bu] 2
If the source drive != target drive:
.IP \[bu] 2
Clone target path from target drive to source drive
.IP \[bu] 2
Rename
.RE
.IP \[bu] 2
If \f[B]any\f[] of the renames succeed the higher level rename is
considered a success
.IP \[bu] 2
If \f[B]no\f[] renames succeed the first error encountered will be
returned
.IP \[bu] 2
On success:
.RS 2
.IP \[bu] 2
Remove the target from all drives with no source file
.IP \[bu] 2
Remove the source from all drives which failed to rename
.RE
.PP
The the removals are subject to normal entitlement checks.
.PP
The above behavior will help minimize the likelihood of EXDEV being
returned but it will still be possible.
.PP
\f[B]link\f[] uses the same strategy but without the removals.
.SS readdir
.PP
readdir (http://linux.die.net/man/3/readdir) is different from all other
filesystem functions.
While it could have it\[aq]s own set of policies to tweak its behavior
at this time it provides a simple union of files and directories found.
Remember that any action or information queried about these files and
directories come from the respective function.
For instance: an \f[B]ls\f[] is a \f[B]readdir\f[] and for each
file/directory returned \f[B]getattr\f[] is called.
Meaning the policy of \f[B]getattr\f[] is responsible for choosing the
file/directory which is the source of the metadata you see in an
\f[B]ls\f[].
.SS statfs / statvfs
.PP
statvfs (http://linux.die.net/man/2/statvfs) normalizes the source
drives based on the fragment size and sums the number of adjusted blocks
and inodes.
This means you will see the combined space of all sources.
Total, used, and free.
The sources however are dedupped based on the drive so multiple sources
on the same drive will not result in double counting it\[aq]s space.
Filesystems mounted further down the tree of the branch will not be
included when checking the mount\[aq]s stats.
.PP
The options \f[C]statfs\f[] and \f[C]statfs_ignore\f[] can be used to
modify \f[C]statfs\f[] behavior.
.SH BUILDING
.PP
\f[B]NOTE:\f[] Prebuilt packages can be found at:
https://github.com/trapexit/mergerfs/releases
.PP
First get the code from github (https://github.com/trapexit/mergerfs).
.IP
.nf
\f[C]
$\ git\ clone\ https://github.com/trapexit/mergerfs.git
$\ #\ or
$\ wget\ https://github.com/trapexit/mergerfs/releases/download/<ver>/mergerfs\-<ver>.tar.gz
\f[]
.fi
.SS Debian / Ubuntu
.IP
.nf
\f[C]
$\ cd\ mergerfs
$\ sudo\ tools/install\-build\-pkgs
$\ make\ deb
$\ sudo\ dpkg\ \-i\ ../mergerfs_version_arch.deb
\f[]
.fi
.SS Fedora
.IP
.nf
\f[C]
$\ su\ \-
#\ cd\ mergerfs
#\ tools/install\-build\-pkgs
#\ make\ rpm
#\ rpm\ \-i\ rpmbuild/RPMS/<arch>/mergerfs\-<verion>.<arch>.rpm
\f[]
.fi
.SS Generically
.PP
Have git, g++, make, python, automake, libtool installed.
.IP
.nf
\f[C]
$\ cd\ mergerfs
$\ make
$\ sudo\ make\ install
\f[]
.fi
.SS Generically with system libfuse
.PP
\f[B]NOTE:\f[] Configurable threading and thus \f[C]\-o\ threads=num\f[]
option will be unavailable when built with system libfuse.
.PP
Have git, g++, make, python, pkg\-config installed.
Also, install libfuse >= 2.9.7 (but not libfuse\-3.x) and matching
libfuse\-dev (or libfuse\-devel).
.IP
.nf
\f[C]
$\ cd\ mergerfs
$\ make\ INTERNAL_FUSE=0
$\ sudo\ make\ INTERNAL_FUSE=0\ install
\f[]
.fi
.SS Other build options
.IP
.nf
\f[C]
$\ make\ STATIC=1\ #\ builds\ a\ static\ binary
$\ make\ LTO=1\ \ \ \ #\ perform\ link\ time\ optimization
\f[]
.fi
.SH RUNTIME CONFIG
.SS .mergerfs pseudo file
.IP
.nf
\f[C]
<mountpoint>/.mergerfs
\f[]
.fi
.PP
There is a pseudo file available at the mount point which allows for the
runtime modification of certain \f[B]mergerfs\f[] options.
The file will not show up in \f[B]readdir\f[] but can be
\f[B]stat\f[]\[aq]ed and manipulated via
{list,get,set}xattrs (http://linux.die.net/man/2/listxattr) calls.
.PP
Any changes made at runtime are \f[B]not\f[] persisted.
If you wish for values to persist they must be included as options
wherever you configure the mounting of mergerfs (/etc/fstab).
.SS Keys
.PP
Use \f[C]xattr\ \-l\ /mountpoint/.mergerfs\f[] to see all supported
keys.
Some are informational and therefore read\-only.
.SS user.mergerfs.branches
.PP
\f[B]NOTE:\f[] formerly \f[C]user.mergerfs.srcmounts\f[] but said key is
still supported.
.PP
Used to query or modify the list of branches.
When modifying there are several shortcuts to easy manipulation of the
list.
.PP
.TS
tab(@);
l l.
T{
Value
T}@T{
Description
T}
_
T{
[list]
T}@T{
set
T}
T{
+<[list]
T}@T{
prepend
T}
T{
+>[list]
T}@T{
append
T}
T{
\-[list]
T}@T{
remove all values provided
T}
T{
\-<
T}@T{
remove first in list
T}
T{
\->
T}@T{
remove last in list
T}
.TE
.PP
\f[C]xattr\ \-w\ user.mergerfs.branches\ +</mnt/drive3\ /mnt/pool/.mergerfs\f[]
.PP
The \f[C]=NC\f[], \f[C]=RO\f[], \f[C]=RW\f[] syntax works just as on the
command line.
.SS minfreespace
.PP
Input: interger with an optional multiplier suffix.
\f[B]K\f[], \f[B]M\f[], or \f[B]G\f[].
.PP
Output: value in bytes
.SS moveonenospc
.PP
Input: \f[B]true\f[] and \f[B]false\f[]
.PP
Ouput: \f[B]true\f[] or \f[B]false\f[]
.SS categories / funcs
.PP
Input: short policy string as described elsewhere in this document
.PP
Output: the policy string except for categories where its funcs have
multiple types.
In that case it will be a comma separated list
.SS Example
.IP
.nf
\f[C]
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-l\ .mergerfs
user.mergerfs.branches:\ /mnt/a:/mnt/b
user.mergerfs.minfreespace:\ 4294967295
user.mergerfs.moveonenospc:\ false
\&...

[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.category.search\ .mergerfs
ff

[trapexit:/mnt/mergerfs]\ $\ xattr\ \-w\ user.mergerfs.category.search\ newest\ .mergerfs
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.category.search\ .mergerfs
newest

[trapexit:/mnt/mergerfs]\ $\ xattr\ \-w\ user.mergerfs.branches\ +/mnt/c\ .mergerfs
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.branches\ .mergerfs
/mnt/a:/mnt/b:/mnt/c

[trapexit:/mnt/mergerfs]\ $\ xattr\ \-w\ user.mergerfs.branches\ =/mnt/c\ .mergerfs
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.branches\ .mergerfs
/mnt/c

[trapexit:/mnt/mergerfs]\ $\ xattr\ \-w\ user.mergerfs.branches\ \[aq]+</mnt/a:/mnt/b\[aq]\ .mergerfs
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.branches\ .mergerfs
/mnt/a:/mnt/b:/mnt/c
\f[]
.fi
.SS file / directory xattrs
.PP
While they won\[aq]t show up when using
listxattr (http://linux.die.net/man/2/listxattr) \f[B]mergerfs\f[]
offers a number of special xattrs to query information about the files
served.
To access the values you will need to issue a
getxattr (http://linux.die.net/man/2/getxattr) for one of the following:
.IP \[bu] 2
\f[B]user.mergerfs.basepath:\f[] the base mount point for the file given
the current getattr policy
.IP \[bu] 2
\f[B]user.mergerfs.relpath:\f[] the relative path of the file from the
perspective of the mount point
.IP \[bu] 2
\f[B]user.mergerfs.fullpath:\f[] the full path of the original file
given the getattr policy
.IP \[bu] 2
\f[B]user.mergerfs.allpaths:\f[] a NUL (\[aq]\[aq]) separated list of
full paths to all files found
.IP
.nf
\f[C]
[trapexit:/mnt/mergerfs]\ $\ ls
A\ B\ C
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.fullpath\ A
/mnt/a/full/path/to/A
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.basepath\ A
/mnt/a
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.relpath\ A
/full/path/to/A
[trapexit:/mnt/mergerfs]\ $\ xattr\ \-p\ user.mergerfs.allpaths\ A\ |\ tr\ \[aq]\\0\[aq]\ \[aq]\\n\[aq]
/mnt/a/full/path/to/A
/mnt/b/full/path/to/A
\f[]
.fi
.SH TOOLING
.IP \[bu] 2
https://github.com/trapexit/mergerfs\-tools
.IP \[bu] 2
mergerfs.ctl: A tool to make it easier to query and configure mergerfs
at runtime
.IP \[bu] 2
mergerfs.fsck: Provides permissions and ownership auditing and the
ability to fix them
.IP \[bu] 2
mergerfs.dedup: Will help identify and optionally remove duplicate files
.IP \[bu] 2
mergerfs.dup: Ensure there are at least N copies of a file across the
pool
.IP \[bu] 2
mergerfs.balance: Rebalance files across drives by moving them from the
most filled to the least filled
.IP \[bu] 2
mergerfs.mktrash: Creates FreeDesktop.org Trash specification compatible
directories on a mergerfs mount
.IP \[bu] 2
https://github.com/trapexit/scorch
.IP \[bu] 2
scorch: A tool to help discover silent corruption of files and keep
track of files
.IP \[bu] 2
https://github.com/trapexit/bbf
.IP \[bu] 2
bbf (bad block finder): a tool to scan for and \[aq]fix\[aq] hard drive
bad blocks and find the files using those blocks
.SH CACHING
.SS page caching
.PP
The kernel performs caching of data pages on all files not opened with
\f[C]O_DIRECT\f[].
Due to mergerfs using FUSE and therefore being a userland process the
kernel can double cache the content being read through mergerfs.
Once from the underlying filesystem and once for mergerfs.
Using \f[C]direct_io\f[] and/or \f[C]dropcacheonclose\f[] help minimize
the double caching.
\f[C]direct_io\f[] will instruct the kernel to bypass the page cache for
files opened through mergerfs.
\f[C]dropcacheonclose\f[] will cause mergerfs to instruct the kernel to
flush a file\[aq]s page cache for which it had opened when closed.
If most data is read once its probably best to enable both (read above
for details and limitations).
.PP
If a cache is desired for mergerfs do not enable \f[C]direct_io\f[] and
instead possibly use \f[C]auto_cache\f[] or \f[C]kernel_cache\f[].
By default FUSE will invalidate cached pages when a file is opened.
By using \f[C]auto_cache\f[] it will instead use \f[C]getattr\f[] to
check if a file has changed when the file is opened and if so will flush
the cache.
\f[C]ac_attr_timeout\f[] is the timeout for keeping said cache.
Alternatively \f[C]kernel_cache\f[] will keep the cache across opens
unless invalidated through other means.
You should only uses these if you do not plan to write/modify the same
files through mergerfs and the underlying filesystem at the same time.
It could lead to corruption.
Then again doing so without caching can also cause issues.
.PP
It\[aq]s a difficult balance between memory usage, cache bloat &
duplication, and performance.
Ideally mergerfs would be able to disable caching for the files it
reads/writes but allow page caching for itself.
That would limit the FUSE overhead.
However, there isn\[aq]t good way to achieve this.
.SS entry & attribute caching
.PP
Given the relatively high cost of FUSE due to the kernel <\-> userspace
round trips there are kernel side caches for file entries and
attributes.
The entry cache limits the \f[C]lookup\f[] calls to mergerfs which ask
if a file exists.
The attribute cache limits the need to make \f[C]getattr\f[] calls to
mergerfs which provide file attributes (mode, size, type, etc.).
As with the page cache these should not be used if the underlying
filesystems are being manipulated at the same time as it could lead to
odd behavior or data corruption.
The options for setting these are \f[C]entry_timeout\f[] and
\f[C]negative_timeout\f[] for the entry cache and \f[C]attr_timeout\f[]
for the attributes cache.
\f[C]negative_timeout\f[] refers to the timeout for negative responses
to lookups (non\-existant files).
.SS policy caching
.PP
Policies are run every time a function is called.
These policies can be expensive depending on the setup and usage
patterns.
Generally we wouldn\[aq]t want to cache policy results because it may
result in stale responses if the underlying drives are used directly.
.PP
The \f[C]open\f[] policy cache will cache the result of an \f[C]open\f[]
policy for a particular input for \f[C]cache.open\f[] seconds or until
the file is unlinked.
Each file close (release) will randomly chose to clean up the cache of
expired entries.
.PP
This cache is useful in cases like that of \f[B]Transmission\f[] which
has a "open, read/write, close" pattern (which is much more costly due
to the FUSE overhead than normal.)
.SS statfs caching
.PP
Of the syscalls used by mergerfs in policies the \f[C]statfs\f[] /
\f[C]statvfs\f[] call is perhaps the most expensive.
It\[aq]s used to find out the available space of a drive and whether it
is mounted read\-only.
Depending on the setup and usage pattern these queries can be relatively
costly.
When \f[C]cache.statfs\f[] is enabled all calls to \f[C]statfs\f[] by a
policy will be cached for the number of seconds its set to.
.PP
Example: If the create policy is \f[C]mfs\f[] and the timeout is 60 then
for that 60 seconds the same drive will be returned as the target for
creates because the available space won\[aq]t be updated for that time.
.SS writeback caching
.PP
writeback caching is a technique for improving write speeds by batching
writes at a faster device and then bulk writing to the slower device.
With FUSE the kernel will wait for a number of writes to be made and
then send it to the filesystem as one request.
mergerfs currently uses a slightly modified and vendored libfuse 2.9.7
which does not support writeback caching.
However, a prototype port to libfuse 3.x has been made and the writeback
cache appears to work as expected (though performance improvements
greatly depend on the way the client app writes data).
Once the port is complete and thoroughly tested writeback caching will
be available.
.SS tiered caching
.PP
Some storage technologies support what some call "tiered" caching.
The placing of usually smaller, faster storage as a transparent cache to
larger, slower storage.
NVMe, SSD, Optane in front of traditional HDDs for instance.
.PP
MergerFS does not natively support any sort of tiered caching.
Most users have no use for such a feature and its inclusion would
complicate the code.
However, there are a few situations where a cache drive could help with
a typical mergerfs setup.
.IP "1." 3
Fast network, slow drives, many readers: You\[aq]ve a 10+Gbps network
with many readers and your regular drives can\[aq]t keep up.
.IP "2." 3
Fast network, slow drives, small\[aq]ish bursty writes: You have a
10+Gbps network and wish to transfer amounts of data less than your
cache drive but wish to do so quickly.
.PP
With #1 its arguable if you should be using mergerfs at all.
RAID would probably be the better solution.
If you\[aq]re going to use mergerfs there are other tactics that may
help: spreading the data across drives (see the mergerfs.dup tool) and
setting \f[C]func.open=rand\f[], using \f[C]symlinkify\f[], or using
dm\-cache or a similar technology to add tiered cache to the underlying
device.
.PP
With #2 one could use dm\-cache as well but there is another solution
which requires only mergerfs and a cronjob.
.IP "1." 3
Create 2 mergerfs pools.
One which includes just the slow drives and one which has both the fast
drives (SSD,NVME,etc.) and slow drives.
.IP "2." 3
The \[aq]cache\[aq] pool should have the cache drives listed first.
.IP "3." 3
The best \f[C]create\f[] policies to use for the \[aq]cache\[aq] pool
would probably be \f[C]ff\f[], \f[C]epff\f[], \f[C]lfs\f[], or
\f[C]eplfs\f[].
The latter two under the assumption that the cache drive(s) are far
smaller than the backing drives.
If using path preserving policies remember that you\[aq]ll need to
manually create the core directories of those paths you wish to be
cached.
Be sure the permissions are in sync.
Use \f[C]mergerfs.fsck\f[] to check / correct them.
You could also tag the slow drives as \f[C]=NC\f[] though that\[aq]d
mean if the cache drives fill you\[aq]d get "out of space" errors.
.IP "4." 3
Enable \f[C]moveonenospc\f[] and set \f[C]minfreespace\f[]
appropriately.
Perhaps setting \f[C]minfreespace\f[] to the size of the largest cache
drive.
.IP "5." 3
Set your programs to use the cache pool.
.IP "6." 3
Save one of the below scripts or create you\[aq]re own.
.IP "7." 3
Use \f[C]cron\f[] (as root) to schedule the command at whatever
frequency is appropriate for your workflow.
.SS time based expiring
.PP
Move files from cache to backing pool based only on the last time the
file was accessed.
Replace \f[C]\-atime\f[] with \f[C]\-amin\f[] if you want minutes rather
than days.
May want to use the \f[C]fadvise\f[] / \f[C]\-\-drop\-cache\f[] version
of rsync or run rsync with the tool "nocache".
.IP
.nf
\f[C]
#!/bin/bash

if\ [\ $#\ !=\ 3\ ];\ then
\ \ echo\ "usage:\ $0\ <cache\-drive>\ <backing\-pool>\ <days\-old>"
\ \ exit\ 1
fi

CACHE="${1}"
BACKING="${2}"
N=${3}

find\ "${CACHE}"\ \-type\ f\ \-atime\ +${N}\ \-printf\ \[aq]%P\\n\[aq]\ |\ \\
\ \ rsync\ \-\-files\-from=\-\ \-axqHAXWES\ \-\-preallocate\ \-\-remove\-source\-files\ "${CACHE}/"\ "${BACKING}/"
\f[]
.fi
.SS percentage full expiring
.PP
Move the oldest file from the cache to the backing pool.
Continue till below percentage threshold.
.IP
.nf
\f[C]
#!/bin/bash

if\ [\ $#\ !=\ 3\ ];\ then
\ \ echo\ "usage:\ $0\ <cache\-drive>\ <backing\-pool>\ <percentage>"
\ \ exit\ 1
fi

CACHE="${1}"
BACKING="${2}"
PERCENTAGE=${3}

set\ \-o\ errexit
while\ [\ $(df\ \-\-output=pcent\ "${CACHE}"\ |\ grep\ \-v\ Use\ |\ cut\ \-d\[aq]%\[aq]\ \-f1)\ \-gt\ ${PERCENTAGE}\ ]
do
\ \ \ \ FILE=$(find\ "${CACHE}"\ \-type\ f\ \-printf\ \[aq]%A\@\ %P\\n\[aq]\ |\ \\
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ sort\ |\ \\
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ head\ \-n\ 1\ |\ \\
\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ cut\ \-d\[aq]\ \[aq]\ \-f2\-)
\ \ \ \ test\ \-n\ "${FILE}"
\ \ \ \ rsync\ \-axqHAXWES\ \-\-preallocate\ \-\-remove\-source\-files\ "${CACHE}/./${FILE}"\ "${BACKING}/"
done
\f[]
.fi
.SH TIPS / NOTES
.IP \[bu] 2
The recommended base options are
\f[B]defaults,allow_other,direct_io,use_ino\f[].
(\f[B]use_ino\f[] will only work when used with mergerfs 2.18.0 and
above.)
.IP \[bu] 2
Run mergerfs as \f[C]root\f[] unless you\[aq]re merging paths which are
owned by the same user otherwise strange permission issues may arise.
.IP \[bu] 2
https://github.com/trapexit/backup\-and\-recovery\-howtos : A set of
guides / howtos on creating a data storage system, backing it up,
maintaining it, and recovering from failure.
.IP \[bu] 2
If you don\[aq]t see some directories and files you expect in a merged
point or policies seem to skip drives be sure the user has permission to
all the underlying directories.
Use \f[C]mergerfs.fsck\f[] to audit the drive for out of sync
permissions.
.IP \[bu] 2
Do \f[B]not\f[] use \f[C]direct_io\f[] if you expect applications (such
as rtorrent) to mmap (http://linux.die.net/man/2/mmap) files.
It is not currently supported in FUSE w/ \f[C]direct_io\f[] enabled.
Enabling \f[C]dropcacheonclose\f[] is recommended when
\f[C]direct_io\f[] is disabled.
.IP \[bu] 2
Since POSIX gives you only error or success on calls its difficult to
determine the proper behavior when applying the behavior to multiple
targets.
\f[B]mergerfs\f[] will return an error only if all attempts of an action
fail.
Any success will lead to a success returned.
This means however that some odd situations may arise.
.IP \[bu] 2
Kodi (http://kodi.tv), Plex (http://plex.tv),
Subsonic (http://subsonic.org), etc.
can use directory mtime (http://linux.die.net/man/2/stat) to more
efficiently determine whether to scan for new content rather than simply
performing a full scan.
If using the default \f[B]getattr\f[] policy of \f[B]ff\f[] its possible
those programs will miss an update on account of it returning the first
directory found\[aq]s \f[B]stat\f[] info and its a later directory on
another mount which had the \f[B]mtime\f[] recently updated.
To fix this you will want to set \f[B]func.getattr=newest\f[].
Remember though that this is just \f[B]stat\f[].
If the file is later \f[B]open\f[]\[aq]ed or \f[B]unlink\f[]\[aq]ed and
the policy is different for those then a completely different file or
directory could be acted on.
.IP \[bu] 2
Some policies mixed with some functions may result in strange behaviors.
Not that some of these behaviors and race conditions couldn\[aq]t happen
outside \f[B]mergerfs\f[] but that they are far more likely to occur on
account of the attempt to merge together multiple sources of data which
could be out of sync due to the different policies.
.IP \[bu] 2
For consistency its generally best to set \f[B]category\f[] wide
policies rather than individual \f[B]func\f[]\[aq]s.
This will help limit the confusion of tools such as
rsync (http://linux.die.net/man/1/rsync).
However, the flexibility is there if needed.
.SH KNOWN ISSUES / BUGS
.SS directory mtime is not being updated
.PP
Remember that the default policy for \f[C]getattr\f[] is \f[C]ff\f[].
The information for the first directory found will be returned.
If it wasn\[aq]t the directory which had been updated then it will
appear outdated.
.PP
The reason this is the default is because any other policy would be far
more expensive and for many applications it is unnecessary.
To always return the directory with the most recent mtime or a faked
value based on all found would require a scan of all drives.
That alone is far more expensive than \f[C]ff\f[] but would also
possibly spin up sleeping drives.
.PP
If you always want the directory information from the one with the most
recent mtime then use the \f[C]newest\f[] policy for \f[C]getattr\f[].
.SS \f[C]mv\ /mnt/pool/foo\ /mnt/disk1/foo\f[] removes \f[C]foo\f[]
.PP
This is not a bug.
.PP
Run in verbose mode to better undertand what\[aq]s happening:
.IP
.nf
\f[C]
$\ mv\ \-v\ /mnt/pool/foo\ /mnt/disk1/foo
copied\ \[aq]/mnt/pool/foo\[aq]\ \->\ \[aq]/mnt/disk1/foo\[aq]
removed\ \[aq]/mnt/pool/foo\[aq]
$\ ls\ /mnt/pool/foo
ls:\ cannot\ access\ \[aq]/mnt/pool/foo\[aq]:\ No\ such\ file\ or\ directory
\f[]
.fi
.PP
\f[C]mv\f[], when working across devices, is copying the source to
target and then removing the source.
Since the source \f[B]is\f[] the target in this case, depending on the
unlink policy, it will remove the just copied file and other files
across the branches.
.PP
If you want to move files to one drive just copy them there and use
mergerfs.dedup to clean up the old paths or manually remove them from
the branches directly.
.SS cached memory appears greater than it should be
.PP
Use the \f[C]direct_io\f[] option as described above.
Due to what mergerfs is doing there ends up being two caches of a file
under normal usage.
One from the underlying filesystem and one from mergerfs.
Enabling \f[C]direct_io\f[] removes the mergerfs cache.
This saves on memory but means the kernel needs to communicate with
mergerfs more often and can therefore result in slower speeds.
.PP
Since enabling \f[C]direct_io\f[] disables \f[C]mmap\f[] this is not an
ideal situation however write speeds should be increased.
.PP
If \f[C]direct_io\f[] is disabled it is probably a good idea to enable
\f[C]dropcacheonclose\f[] to minimize double caching.
.SS NFS clients returning ESTALE / Stale file handle
.PP
Be sure to use \f[C]noforget\f[] and \f[C]use_ino\f[] arguments.
.SS NFS clients don\[aq]t work
.PP
Some NFS clients appear to fail when a mergerfs mount is exported.
Kodi in particular seems to have issues.
.PP
Try enabling the \f[C]use_ino\f[] option.
Some have reported that it fixes the issue.
.SS rtorrent fails with ENODEV (No such device)
.PP
Be sure to turn off \f[C]direct_io\f[].
rtorrent and some other applications use
mmap (http://linux.die.net/man/2/mmap) to read and write to files and
offer no failback to traditional methods.
FUSE does not currently support mmap while using \f[C]direct_io\f[].
There may be a performance penalty on writes with \f[C]direct_io\f[] off
as well as the problem of double caching but it\[aq]s the only way to
get such applications to work.
If the performance loss is too high for other apps you can mount
mergerfs twice.
Once with \f[C]direct_io\f[] enabled and one without it.
Be sure to set \f[C]dropcacheonclose=true\f[] if not using
\f[C]direct_io\f[].
.SS Plex doesn\[aq]t work with mergerfs
.PP
It does.
If you\[aq]re trying to put Plex\[aq]s config / metadata on mergerfs you
have to leave \f[C]direct_io\f[] off because Plex is using sqlite which
apparently needs mmap.
mmap doesn\[aq]t work with \f[C]direct_io\f[].
To fix this place the data elsewhere or disable \f[C]direct_io\f[] (with
\f[C]dropcacheonclose=true\f[]).
.PP
If the issue is that scanning doesn\[aq]t seem to pick up media then be
sure to set \f[C]func.getattr=newest\f[] as mentioned above.
.SS mmap performance is really bad
.PP
There is a bug (https://lkml.org/lkml/2016/3/16/260) in caching which
affects overall performance of mmap through FUSE in Linux 4.x kernels.
It is fixed in 4.4.10 and 4.5.4 (https://lkml.org/lkml/2016/5/11/59).
.SS When a program tries to move or rename a file it fails
.PP
Please read the section above regarding rename & link (#rename--link).
.PP
The problem is that many applications do not properly handle
\f[C]EXDEV\f[] errors which \f[C]rename\f[] and \f[C]link\f[] may return
even though they are perfectly valid situations which do not indicate
actual drive or OS errors.
The error will only be returned by mergerfs if using a path preserving
policy as described in the policy section above.
If you do not care about path preservation simply change the mergerfs
policy to the non\-path preserving version.
For example: \f[C]\-o\ category.create=mfs\f[]
.PP
Ideally the offending software would be fixed and it is recommended that
if you run into this problem you contact the software\[aq]s author and
request proper handling of \f[C]EXDEV\f[] errors.
.SS Samba: Moving files / directories fails
.PP
Workaround: Copy the file/directory and then remove the original rather
than move.
.PP
This isn\[aq]t an issue with Samba but some SMB clients.
GVFS\-fuse v1.20.3 and prior (found in Ubuntu 14.04 among others) failed
to handle certain error codes correctly.
Particularly \f[B]STATUS_NOT_SAME_DEVICE\f[] which comes from the
\f[B]EXDEV\f[] which is returned by \f[B]rename\f[] when the call is
crossing mount points.
When a program gets an \f[B]EXDEV\f[] it needs to explicitly take an
alternate action to accomplish it\[aq]s goal.
In the case of \f[B]mv\f[] or similar it tries \f[B]rename\f[] and on
\f[B]EXDEV\f[] falls back to a manual copying of data between the two
locations and unlinking the source.
In these older versions of GVFS\-fuse if it received \f[B]EXDEV\f[] it
would translate that into \f[B]EIO\f[].
This would cause \f[B]mv\f[] or most any application attempting to move
files around on that SMB share to fail with a IO error.
.PP
GVFS\-fuse v1.22.0 (https://bugzilla.gnome.org/show_bug.cgi?id=734568)
and above fixed this issue but a large number of systems use the older
release.
On Ubuntu the version can be checked by issuing
\f[C]apt\-cache\ showpkg\ gvfs\-fuse\f[].
Most distros released in 2015 seem to have the updated release and will
work fine but older systems may not.
Upgrading gvfs\-fuse or the distro in general will address the problem.
.PP
In Apple\[aq]s MacOSX 10.9 they replaced Samba (client and server) with
their own product.
It appears their new client does not handle \f[B]EXDEV\f[] either and
responds similar to older release of gvfs on Linux.
.SS Trashing files occasionally fails
.PP
This is the same issue as with Samba.
\f[C]rename\f[] returns \f[C]EXDEV\f[] (in our case that will really
only happen with path preserving policies like \f[C]epmfs\f[]) and the
software doesn\[aq]t handle the situtation well.
This is unfortunately a common failure of software which moves files
around.
The standard indicates that an implementation \f[C]MAY\f[] choose to
support non\-user home directory trashing of files (which is a
\f[C]MUST\f[]).
The implementation \f[C]MAY\f[] also support "top directory trashes"
which many probably do.
.PP
To create a \f[C]$topdir/.Trash\f[] directory as defined in the standard
use the mergerfs\-tools (https://github.com/trapexit/mergerfs-tools)
tool \f[C]mergerfs.mktrash\f[].
.SS tar: Directory renamed before its status could be extracted
.PP
Make sure to use the \f[C]use_ino\f[] option.
.SS Supplemental user groups
.PP
Due to the overhead of
getgroups/setgroups (http://linux.die.net/man/2/setgroups) mergerfs
utilizes a cache.
This cache is opportunistic and per thread.
Each thread will query the supplemental groups for a user when that
particular thread needs to change credentials and will keep that data
for the lifetime of the thread.
This means that if a user is added to a group it may not be picked up
without the restart of mergerfs.
However, since the high level FUSE API\[aq]s (at least the standard
version) thread pool dynamically grows and shrinks it\[aq]s possible
that over time a thread will be killed and later a new thread with no
cache will start and query the new data.
.PP
The gid cache uses fixed storage to simplify the design and be
compatible with older systems which may not have C++11 compilers.
There is enough storage for 256 users\[aq] supplemental groups.
Each user is allowed upto 32 supplemental groups.
Linux >= 2.6.3 allows upto 65535 groups per user but most other *nixs
allow far less.
NFS allowing only 16.
The system does handle overflow gracefully.
If the user has more than 32 supplemental groups only the first 32 will
be used.
If more than 256 users are using the system when an uncached user is
found it will evict an existing user\[aq]s cache at random.
So long as there aren\[aq]t more than 256 active users this should be
fine.
If either value is too low for your needs you will have to modify
\f[C]gidcache.hpp\f[] to increase the values.
Note that doing so will increase the memory needed by each thread.
.SS mergerfs or libfuse crashing
.PP
\f[B]NOTE:\f[] as of mergerfs 2.22.0 it includes the most recent version
of libfuse (or requires libfuse\-2.9.7) so any crash should be reported.
For older releases continue reading...
.PP
If suddenly the mergerfs mount point disappears and
\f[C]Transport\ endpoint\ is\ not\ connected\f[] is returned when
attempting to perform actions within the mount directory \f[B]and\f[]
the version of libfuse (use \f[C]mergerfs\ \-v\f[] to find the version)
is older than \f[C]2.9.4\f[] its likely due to a bug in libfuse.
Affected versions of libfuse can be found in Debian Wheezy, Ubuntu
Precise and others.
.PP
In order to fix this please install newer versions of libfuse.
If using a Debian based distro (Debian,Ubuntu,Mint) you can likely just
install newer versions of
libfuse (https://packages.debian.org/unstable/libfuse2) and
fuse (https://packages.debian.org/unstable/fuse) from the repo of a
newer release.
.SS mergerfs appears to be crashing or exiting
.PP
There seems to be an issue with Linux version \f[C]4.9.0\f[] and above
in which an invalid message appears to be transmitted to libfuse (used
by mergerfs) causing it to exit.
No messages will be printed in any logs as its not a proper crash.
Debugging of the issue is still ongoing and can be followed via the
fuse\-devel
thread (https://sourceforge.net/p/fuse/mailman/message/35662577).
.SS mergerfs under heavy load and memory preasure leads to kernel panic
.PP
https://lkml.org/lkml/2016/9/14/527
.IP
.nf
\f[C]
[25192.515454]\ kernel\ BUG\ at\ /build/linux\-a2WvEb/linux\-4.4.0/mm/workingset.c:346!
[25192.517521]\ invalid\ opcode:\ 0000\ [#1]\ SMP
[25192.519602]\ Modules\ linked\ in:\ netconsole\ ip6t_REJECT\ nf_reject_ipv6\ ipt_REJECT\ nf_reject_ipv4\ configfs\ binfmt_misc\ veth\ bridge\ stp\ llc\ nf_conntrack_ipv6\ nf_defrag_ipv6\ xt_conntrack\ ip6table_filter\ ip6_tables\ xt_multiport\ iptable_filter\ ipt_MASQUERADE\ nf_nat_masquerade_ipv4\ xt_comment\ xt_nat\ iptable_nat\ nf_conntrack_ipv4\ nf_defrag_ipv4\ nf_nat_ipv4\ nf_nat\ nf_conntrack\ xt_CHECKSUM\ xt_tcpudp\ iptable_mangle\ ip_tables\ x_tables\ intel_rapl\ x86_pkg_temp_thermal\ intel_powerclamp\ eeepc_wmi\ asus_wmi\ coretemp\ sparse_keymap\ kvm_intel\ ppdev\ kvm\ irqbypass\ mei_me\ 8250_fintek\ input_leds\ serio_raw\ parport_pc\ tpm_infineon\ mei\ shpchp\ mac_hid\ parport\ lpc_ich\ autofs4\ drbg\ ansi_cprng\ dm_crypt\ algif_skcipher\ af_alg\ btrfs\ raid456\ async_raid6_recov\ async_memcpy\ async_pq\ async_xor\ async_tx\ xor\ raid6_pq\ libcrc32c\ raid0\ multipath\ linear\ raid10\ raid1\ i915\ crct10dif_pclmul\ crc32_pclmul\ aesni_intel\ i2c_algo_bit\ aes_x86_64\ drm_kms_helper\ lrw\ gf128mul\ glue_helper\ ablk_helper\ syscopyarea\ cryptd\ sysfillrect\ sysimgblt\ fb_sys_fops\ drm\ ahci\ r8169\ libahci\ mii\ wmi\ fjes\ video\ [last\ unloaded:\ netconsole]
[25192.540910]\ CPU:\ 2\ PID:\ 63\ Comm:\ kswapd0\ Not\ tainted\ 4.4.0\-36\-generic\ #55\-Ubuntu
[25192.543411]\ Hardware\ name:\ System\ manufacturer\ System\ Product\ Name/P8H67\-M\ PRO,\ BIOS\ 3904\ 04/27/2013
[25192.545840]\ task:\ ffff88040cae6040\ ti:\ ffff880407488000\ task.ti:\ ffff880407488000
[25192.548277]\ RIP:\ 0010:[<ffffffff811ba501>]\ \ [<ffffffff811ba501>]\ shadow_lru_isolate+0x181/0x190
[25192.550706]\ RSP:\ 0018:ffff88040748bbe0\ \ EFLAGS:\ 00010002
[25192.553127]\ RAX:\ 0000000000001c81\ RBX:\ ffff8802f91ee928\ RCX:\ ffff8802f91eeb38
[25192.555544]\ RDX:\ ffff8802f91ee938\ RSI:\ ffff8802f91ee928\ RDI:\ ffff8804099ba2c0
[25192.557914]\ RBP:\ ffff88040748bc08\ R08:\ 000000000001a7b6\ R09:\ 000000000000003f
[25192.560237]\ R10:\ 000000000001a750\ R11:\ 0000000000000000\ R12:\ ffff8804099ba2c0
[25192.562512]\ R13:\ ffff8803157e9680\ R14:\ ffff8803157e9668\ R15:\ ffff8804099ba2c8
[25192.564724]\ FS:\ \ 0000000000000000(0000)\ GS:ffff88041f280000(0000)\ knlGS:0000000000000000
[25192.566990]\ CS:\ \ 0010\ DS:\ 0000\ ES:\ 0000\ CR0:\ 0000000080050033
[25192.569201]\ CR2:\ 00007ffabb690000\ CR3:\ 0000000001e0a000\ CR4:\ 00000000000406e0
[25192.571419]\ Stack:
[25192.573550]\ \ ffff8804099ba2c0\ ffff88039e4f86f0\ ffff8802f91ee928\ ffff8804099ba2c8
[25192.575695]\ \ ffff88040748bd08\ ffff88040748bc58\ ffffffff811b99bf\ 0000000000000052
[25192.577814]\ \ 0000000000000000\ ffffffff811ba380\ 000000000000008a\ 0000000000000080
[25192.579947]\ Call\ Trace:
[25192.582022]\ \ [<ffffffff811b99bf>]\ __list_lru_walk_one.isra.3+0x8f/0x130
[25192.584137]\ \ [<ffffffff811ba380>]\ ?\ memcg_drain_all_list_lrus+0x190/0x190
[25192.586165]\ \ [<ffffffff811b9a83>]\ list_lru_walk_one+0x23/0x30
[25192.588145]\ \ [<ffffffff811ba544>]\ scan_shadow_nodes+0x34/0x50
[25192.590074]\ \ [<ffffffff811a0e9d>]\ shrink_slab.part.40+0x1ed/0x3d0
[25192.591985]\ \ [<ffffffff811a53da>]\ shrink_zone+0x2ca/0x2e0
[25192.593863]\ \ [<ffffffff811a64ce>]\ kswapd+0x51e/0x990
[25192.595737]\ \ [<ffffffff811a5fb0>]\ ?\ mem_cgroup_shrink_node_zone+0x1c0/0x1c0
[25192.597613]\ \ [<ffffffff810a0808>]\ kthread+0xd8/0xf0
[25192.599495]\ \ [<ffffffff810a0730>]\ ?\ kthread_create_on_node+0x1e0/0x1e0
[25192.601335]\ \ [<ffffffff8182e34f>]\ ret_from_fork+0x3f/0x70
[25192.603193]\ \ [<ffffffff810a0730>]\ ?\ kthread_create_on_node+0x1e0/0x1e0
\f[]
.fi
.PP
There is a bug in the kernel.
A work around appears to be turning off \f[C]splice\f[].
Add \f[C]no_splice_write,no_splice_move,no_splice_read\f[] to
mergerfs\[aq] options.
Should be placed after \f[C]defaults\f[] if it is used since it will
turn them on.
This however is not guaranteed to work.
.SS rm: fts_read failed: No such file or directory
.PP
Not \f[I]really\f[] a bug.
The FUSE library will move files when asked to delete them as a way to
deal with certain edge cases and then later delete that file when its
clear the file is no longer needed.
This however can lead to two issues.
One is that these hidden files are noticed by \f[C]rm\ \-rf\f[] or
\f[C]find\f[] when scanning directories and they may try to remove them
and they might have disappeared already.
There is nothing \f[I]wrong\f[] about this happening but it can be
annoying.
The second issue is that a directory might not be able to removed on
account of the hidden file being still there.
.PP
Using the \f[B]hard_remove\f[] option will make it so these temporary
files are not used and files are deleted immedately.
That has a side effect however.
Files which are unlinked and then they are still used (in certain forms)
will result in an error.
.PP
A fix is in the works for this.
.SH FAQ
.SS How well does mergerfs scale? Is it "production ready?"
.PP
Users have reported running mergerfs on everything from a Raspberry Pi
to dual socket Xeon systems with >20 cores.
I\[aq]m aware of at least a few companies which use mergerfs in
production.
Open Media Vault (https://www.openmediavault.org) includes mergerfs is
it\[aq]s sole solution for pooling drives.
.SS Can mergerfs be used with drives which already have data / are in
use?
.PP
Yes.
MergerFS is a proxy and does \f[B]NOT\f[] interfere with the normal form
or function of the drives / mounts / paths it manages.
.PP
MergerFS is \f[B]not\f[] a traditional filesystem.
MergerFS is \f[B]not\f[] RAID.
It does \f[B]not\f[] manipulate the data that passes through it.
It does \f[B]not\f[] shard data across drives.
It merely shards some \f[B]behavior\f[] and aggregates others.
.SS Can mergerfs be removed without affecting the data?
.PP
See the previous question\[aq]s answer.
.SS Do hard links work?
.PP
Yes.
You need to use \f[C]use_ino\f[] to support proper reporting of inodes.
.PP
What mergerfs does not do is fake hard links across branches.
Read the section "rename & link" for how it.
.SS Does mergerfs support CoW / copy\-on\-write?
.PP
Not in the sense of a filesystem like BTRFS or ZFS nor in the overlayfs
or aufs sense.
It does offer a
cow\-shell (http://manpages.ubuntu.com/manpages/bionic/man1/cow-shell.1.html)
like hard link breaking (copy to temp file then rename over original)
which can be useful when wanting to save space by hardlinking duplicate
files but wish to treat each name as if it were a unique and separate
file.
.SS Why can\[aq]t I see my files / directories?
.PP
It\[aq]s almost always a permissions issue.
Unlike mhddfs, which runs as root and attempts to access content as
such, mergerfs always changes it\[aq]s credentials to that of the
caller.
This means that if the user does not have access to a file or directory
than neither will mergerfs.
However, because mergerfs is creating a union of paths it may be able to
read some files and directories on one drive but not another resulting
in an incomplete set.
.PP
Whenever you run into a split permission issue (seeing some but not all
files) try using
mergerfs.fsck (https://github.com/trapexit/mergerfs-tools) tool to check
for and fix the mismatch.
If you aren\[aq]t seeing anything at all be sure that the basic
permissions are correct.
The user and group values are correct and that directories have their
executable bit set.
A common mistake by users new to Linux is to \f[C]chmod\ \-R\ 644\f[]
when they should have \f[C]chmod\ \-R\ u=rwX,go=rX\f[].
.PP
If using a network filesystem such as NFS, SMB, CIFS (Samba) be sure to
pay close attention to anything regarding permissioning and users.
Root squashing and user translation for instance has bitten a few
mergerfs users.
Some of these also affect the use of mergerfs from container platforms
such as Docker.
.SS Why is only one drive being used?
.PP
Are you using a path preserving policy?
The default policy for file creation is \f[C]epmfs\f[].
That means only the drives with the path preexisting will be considered
when creating a file.
If you don\[aq]t care about where files and directories are created you
likely shouldn\[aq]t be using a path preserving policy and instead
something like \f[C]mfs\f[].
.PP
This can be especially apparent when filling an empty pool from an
external source.
If you do want path preservation you\[aq]ll need to perform the manual
act of creating paths on the drives you want the data to land on before
transfering your data.
Setting \f[C]func.mkdir=epall\f[] can simplify managing path
perservation for \f[C]create\f[].
.SS Why was libfuse embedded into mergerfs?
.PP
A significant number of users use mergerfs on distros with old versions
of libfuse which have serious bugs.
Requiring updated versions of libfuse on those distros isn\[aq]t
pratical (no package offered, user inexperience, etc.).
The only practical way to provide a stable runtime on those systems was
to "vendor" the library into the project.
.SS Why use mergerfs over mhddfs?
.PP
mhddfs is no longer maintained and has some known stability and security
issues (see below).
MergerFS provides a superset of mhddfs\[aq] features and should offer
the same or maybe better performance.
.PP
Below is an example of mhddfs and mergerfs setup to work similarly.
.PP
\f[C]mhddfs\ \-o\ mlimit=4G,allow_other\ /mnt/drive1,/mnt/drive2\ /mnt/pool\f[]
.PP
\f[C]mergerfs\ \-o\ minfreespace=4G,defaults,allow_other,category.create=ff\ /mnt/drive1:/mnt/drive2\ /mnt/pool\f[]
.SS Why use mergerfs over aufs?
.PP
aufs is mostly abandoned and no longer available in many distros.
.PP
While aufs can offer better peak performance mergerfs provides more
configurability and is generally easier to use.
mergerfs however does not offer the overlay / copy\-on\-write (CoW)
features which aufs and overlayfs have.
.SS Why use mergerfs over unionfs?
.PP
UnionFS is more like aufs then mergerfs in that it offers overlay / CoW
features.
If you\[aq]re just looking to create a union of drives and want
flexibility in file/directory placement then mergerfs offers that
whereas unionfs is more for overlaying RW filesystems over RO ones.
.SS Why use mergerfs over LVM/ZFS/BTRFS/RAID0 drive concatenation /
striping?
.PP
With simple JBOD / drive concatenation / stripping / RAID0 a single
drive failure will result in full pool failure.
mergerfs performs a similar behavior without the possibility of
catastrophic failure and the difficulties in recovery.
Drives may fail however all other data will continue to be accessable.
.PP
When combined with something like SnapRaid (http://www.snapraid.it)
and/or an offsite backup solution you can have the flexibilty of JBOD
without the single point of failure.
.SS Why use mergerfs over ZFS?
.PP
MergerFS is not intended to be a replacement for ZFS.
MergerFS is intended to provide flexible pooling of arbitrary drives
(local or remote), of arbitrary sizes, and arbitrary filesystems.
For \f[C]write\ once,\ read\ many\f[] usecases such as bulk media
storage.
Where data integrity and backup is managed in other ways.
In that situation ZFS can introduce major maintance and cost burdens as
described
here (http://louwrentius.com/the-hidden-cost-of-using-zfs-for-your-home-nas.html).
.SS Can drives be written to directly? Outside of mergerfs while pooled?
.PP
Yes, however its not recommended to use the same file from within the
pool and from without at the same time.
Especially if using caching of any kind (entry_timeout, attr_timeout,
ac_attr_timeout, negative_timeout, auto_cache, kernel_cache).
.SS Why do I get an "out of space" / "no space left on device" / ENOSPC
error even though there appears to be lots of space available?
.PP
First make sure you\[aq]ve read the sections above about policies, path
preservation, branch filtering, and the options \f[B]minfreespace\f[],
\f[B]moveonenospc\f[], \f[B]statfs\f[], and \f[B]statfs_ignore\f[].
.PP
mergerfs is simply presenting a union of the content within multiple
branches.
The reported free space is an aggregate of space available within the
pool (behavior modified by \f[B]statfs\f[] and \f[B]statfs_ignore\f[]).
It does not represent a contiguous space.
In the same way that read\-only filesystems, those with quotas, or
reserved space report the full theoretical space available.
.PP
Due to path preservation, branch tagging, read\-only status, and
\f[B]minfreespace\f[] settings it is perfectly valid that
\f[C]ENOSPC\f[] / "out of space" / "no space left on device" be
returned.
It is doing what was asked of it: filtering possible branches due to
those settings.
Only one error can be returned and if one of the reasons for filtering a
branch was \f[B]minfreespace\f[] then it will be returned as such.
\f[B]moveonenospc\f[] is only relevant to writing a file which is too
large for the drive its currently on.
.PP
It is also possible that the filesystem selected has run out of inodes.
Use \f[C]df\ \-i\f[] to list the total and available inodes per
filesystem.
.PP
If you don\[aq]t care about path preservation then simply change the
\f[C]create\f[] policy to one which isn\[aq]t.
\f[C]mfs\f[] is probably what most are looking for.
The reason its not default is because it was originally set to
\f[C]epmfs\f[] and changing it now would change people\[aq]s setup.
Such a setting change will likely occur in mergerfs 3.
.SS Can mergerfs mounts be exported over NFS?
.PP
Yes.
Due to current usage of libfuse by mergerfs and how NFS interacts with
it it is necessary to add \f[C]noforget\f[] to mergerfs options to keep
from getting "stale file handle" errors.
.PP
Some clients (Kodi) have issues in which the contents of the NFS mount
will not be presented but users have found that enabling the
\f[C]use_ino\f[] option often fixes that problem.
.SS Can mergerfs mounts be exported over Samba / SMB?
.PP
Yes.
While some users have reported problems it appears to always be related
to how Samba is setup in relation to permissions.
.SS How are inodes calculated?
.PP
mergerfs\-inode = (original\-inode | (device\-id << 32))
.PP
While \f[C]ino_t\f[] is 64 bits only a few filesystems use more than 32.
Similarly, while \f[C]dev_t\f[] is also 64 bits it was traditionally 16
bits.
Bitwise or\[aq]ing them together should work most of the time.
While totally unique inodes are preferred the overhead which would be
needed does not seem to outweighted by the benefits.
.PP
While atypical, yes, inodes can be reused and not refer to the same
file.
The internal id used to reference a file in FUSE is different from the
inode value presented.
The former is the \f[C]nodeid\f[] and is actually a tuple of
(nodeid,generation).
That tuple is not user facing.
The inode is merely metadata passed through the kernel and found using
the \f[C]stat\f[] family of calls or \f[C]readdir\f[].
.PP
From FUSE docs regarding \f[C]use_ino\f[]:
.IP
.nf
\f[C]
Honor\ the\ st_ino\ field\ in\ the\ functions\ getattr()\ and
fill_dir().\ This\ value\ is\ used\ to\ fill\ in\ the\ st_ino\ field
in\ the\ stat(2),\ lstat(2),\ fstat(2)\ functions\ and\ the\ d_ino
field\ in\ the\ readdir(2)\ function.\ The\ filesystem\ does\ not
have\ to\ guarantee\ uniqueness,\ however\ some\ applications
rely\ on\ this\ value\ being\ unique\ for\ the\ whole\ filesystem.
Note\ that\ this\ does\ *not*\ affect\ the\ inode\ that\ libfuse
and\ the\ kernel\ use\ internally\ (also\ called\ the\ "nodeid").
\f[]
.fi
.SS I notice massive slowdowns of writes over NFS
.PP
Due to how NFS works and interacts with FUSE when not using
\f[C]direct_io\f[] its possible that a getxattr for
\f[C]security.capability\f[] will be issued prior to any write.
This will usually result in a massive slowdown for writes.
Using \f[C]direct_io\f[] will keep this from happening (and generally
good to enable unless you need the features it disables) but the
\f[C]security_capability\f[] option can also help by short circuiting
the call and returning \f[C]ENOATTR\f[].
.PP
You could also set \f[C]xattr\f[] to \f[C]noattr\f[] or \f[C]nosys\f[]
to short circuit or stop all xattr requests.
.SS What are these .fuse_hidden files?
.PP
When not using \f[C]hard_remove\f[] libfuse will create
\&.fuse_hiddenXXXXXXXX files when an opened file is unlinked.
This is to simplify "use after unlink" usecases.
There is a possibility these files end up being picked up by software
scanning directories and not ignoring hidden files.
This is rarely a problem but a solution is in the works.
.PP
The files are cleaned up once the file is finally closed.
Only if mergerfs crashes or is killed would they be left around.
They are safe to remove as they are already unlinked files.
.SS It\[aq]s mentioned that there are some security issues with mhddfs.
What are they? How does mergerfs address them?
.PP
mhddfs (https://github.com/trapexit/mhddfs) manages running as
\f[B]root\f[] by calling
getuid() (https://github.com/trapexit/mhddfs/blob/cae96e6251dd91e2bdc24800b4a18a74044f6672/src/main.c#L319)
and if it returns \f[B]0\f[] then it will
chown (http://linux.die.net/man/1/chown) the file.
Not only is that a race condition but it doesn\[aq]t handle other
situations.
Rather than attempting to simulate POSIX ACL behavior the proper way to
manage this is to use seteuid (http://linux.die.net/man/2/seteuid) and
setegid (http://linux.die.net/man/2/setegid), in effect becoming the
user making the original call, and perform the action as them.
This is what mergerfs does and why mergerfs should always run as root.
.PP
In Linux setreuid syscalls apply only to the thread.
GLIBC hides this away by using realtime signals to inform all threads to
change credentials.
Taking after \f[B]Samba\f[], mergerfs uses
\f[B]syscall(SYS_setreuid,...)\f[] to set the callers credentials for
that thread only.
Jumping back to \f[B]root\f[] as necessary should escalated privileges
be needed (for instance: to clone paths between drives).
.PP
For non\-Linux systems mergerfs uses a read\-write lock and changes
credentials only when necessary.
If multiple threads are to be user X then only the first one will need
to change the processes credentials.
So long as the other threads need to be user X they will take a readlock
allowing multiple threads to share the credentials.
Once a request comes in to run as user Y that thread will attempt a
write lock and change to Y\[aq]s credentials when it can.
If the ability to give writers priority is supported then that flag will
be used so threads trying to change credentials don\[aq]t starve.
This isn\[aq]t the best solution but should work reasonably well
assuming there are few users.
.SH PERFORMANCE TWEAKING
.IP \[bu] 2
try adding (or removing) \f[C]direct_io\f[]
.IP \[bu] 2
try adding (or removing) \f[C]auto_cache\f[] / \f[C]noauto_cache\f[]
(included in \f[C]defaults\f[])
.IP \[bu] 2
try adding (or removing) \f[C]kernel_cache\f[] (don\[aq]t use the
underlying filesystems directly if enabling \f[C]kernel_cache\f[])
.IP \[bu] 2
try adding (or removing) \f[C]splice_move\f[], \f[C]splice_read\f[], and
\f[C]splice_write\f[] (all three included in \f[C]defaults\f[])
.IP \[bu] 2
try increasing cache timeouts \f[C]attr_timeout\f[],
\f[C]entry_timeout\f[], \f[C]ac_attr_timeout\f[],
\f[C]negative_timeout\f[]
.IP \[bu] 2
try changing the number of worker threads
.IP \[bu] 2
try disabling \f[C]security_capability\f[] or \f[C]xattr\f[]
.IP \[bu] 2
test theoretical performance using \f[C]nullrw\f[] or mounting a ram
disk
.IP \[bu] 2
use \f[C]symlinkify\f[] if your data is largely static and you need
native speed reads
.IP \[bu] 2
use lvm and lvm cache to place a SSD in front of your HDDs (howto
coming)
.SH SUPPORT
.PP
Filesystems are very complex and difficult to debug.
mergerfs, while being just a proxy of sorts, is also very difficult to
debug given the large number of possible settings it can have itself and
the massive number of environments it can run in.
When reporting on a suspected issue \f[B]please, please\f[] include as
much of the below information as possible otherwise it will be difficult
or impossible to diagnose.
Also please make sure to read all of the above documentation as it
includes nearly every known system or user issue previously encountered.
.SS Information to include in bug reports
.IP \[bu] 2
Version of mergerfs: \f[C]mergerfs\ \-V\f[]
.IP \[bu] 2
mergerfs settings: from \f[C]/etc/fstab\f[] or command line execution
.IP \[bu] 2
Version of Linux: \f[C]uname\ \-a\f[]
.IP \[bu] 2
Versions of any additional software being used
.IP \[bu] 2
List of drives, their filesystems, and sizes (before and after issue):
\f[C]df\ \-h\f[]
.IP \[bu] 2
A \f[C]strace\f[] of the app having problems:
.IP \[bu] 2
\f[C]strace\ \-f\ \-o\ /tmp/app.strace.txt\ <cmd>\f[]
.IP \[bu] 2
A \f[C]strace\f[] of mergerfs while the program is trying to do whatever
it\[aq]s failing to do:
.IP \[bu] 2
\f[C]strace\ \-f\ \-p\ <mergerfsPID>\ \-o\ /tmp/mergerfs.strace.txt\f[]
.IP \[bu] 2
\f[B]Precise\f[] directions on replicating the issue.
Do not leave \f[B]anything\f[] out.
.IP \[bu] 2
Try to recreate the problem in the simplist way using standard programs.
.SS Contact / Issue submission
.IP \[bu] 2
github.com: https://github.com/trapexit/mergerfs/issues
.IP \[bu] 2
email: trapexit\@spawn.link
.IP \[bu] 2
twitter: https://twitter.com/_trapexit
.IP \[bu] 2
reddit: https://www.reddit.com/user/trapexit
.SS Support development
.PP
This software is free to use and released under a very liberal license.
That said if you like this software and would like to support its
development donations are welcome.
.IP \[bu] 2
PayPal: trapexit\@spawn.link
.IP \[bu] 2
Patreon: https://www.patreon.com/trapexit
.IP \[bu] 2
SubscribeStar: https://www.subscribestar.com/trapexit
.IP \[bu] 2
Bitcoin (BTC): 12CdMhEPQVmjz3SSynkAEuD5q9JmhTDCZA
.IP \[bu] 2
Bitcoin Cash (BCH): 1AjPqZZhu7GVEs6JFPjHmtsvmDL4euzMzp
.IP \[bu] 2
Ethereum (ETH): 0x09A166B11fCC127324C7fc5f1B572255b3046E94
.IP \[bu] 2
Litecoin (LTC): LXAsq6yc6zYU3EbcqyWtHBrH1Ypx4GjUjm
.IP \[bu] 2
Ripple (XRP): rNACR2hqGjpbHuCKwmJ4pDpd2zRfuRATcE
.SH LINKS
.IP \[bu] 2
https://spawn.link
.IP \[bu] 2
https://github.com/trapexit/mergerfs
.IP \[bu] 2
https://github.com/trapexit/mergerfs\-tools
.IP \[bu] 2
https://github.com/trapexit/scorch
.IP \[bu] 2
https://github.com/trapexit/bbf
.IP \[bu] 2
https://github.com/trapexit/backup\-and\-recovery\-howtos
.SH AUTHORS
Antonio SJ Musumeci <trapexit@spawn.link>.