Browse Source
Add deploy/zyxel_gs1900.sh
Add deploy/zyxel_gs1900.sh
Add support for deploying to the Zyxel GS1900 line of switches as long as those switches are running at least firmware V2.80. Tested on a Zyxel GS1900-8 and GS1900-24E Resolves #5042pull/5043/head
Joe Bauser
9 months ago
2 changed files with 457 additions and 15 deletions
-
48acme.sh
-
424deploy/zyxel_gs1900.sh
@ -0,0 +1,424 @@ |
|||||
|
#!/usr/bin/env sh |
||||
|
|
||||
|
# Deploy certificates to Zyxel GS1900 series switches |
||||
|
# |
||||
|
# This script uses the https web administration interface in order |
||||
|
# to upload updated certificates to Zyxel GS1900 series switches. |
||||
|
# Only a few models have been tested but untested switches from the |
||||
|
# same model line may work as well. If you test and confirm a switch |
||||
|
# as working please submit a pull request updating this compatibility |
||||
|
# list! |
||||
|
# |
||||
|
# Known Issues: |
||||
|
# 1. This is a consumer grade switch and is a bit underpowered |
||||
|
# the longer the RSA key size the slower your switch web UI |
||||
|
# will be. RSA 2048 will work, RSA 4096 will work but you may |
||||
|
# experience performance problems. |
||||
|
# 2. You must use RSA certificates. The switch will reject EC-256 |
||||
|
# and EC-384 certificates in firmware 2.80 |
||||
|
# See: https://community.zyxel.com/en/discussion/21506/bug-cannot-import-ssl-cert-on-gs1900-8-and-gs1900-24e-firmware-v2-80/ |
||||
|
# |
||||
|
# Current GS1900 Switch Compatibility: |
||||
|
# GS1900-8 - Working as of firmware V2.80 |
||||
|
# GS1900-8HP - Untested |
||||
|
# GS1900-10HP - Untested |
||||
|
# GS1900-16 - Untested |
||||
|
# GS1900-24 - Untested |
||||
|
# GS1900-24E - Working as of firmware V2.80 |
||||
|
# GS1900-24EP - Untested |
||||
|
# GS1900-24HP - Untested |
||||
|
# GS1900-48 - Untested |
||||
|
# GS1900-48HP - Untested |
||||
|
# |
||||
|
# Prerequisite Setup Steps: |
||||
|
# 1. Install at least firmware V2.80 on your switch |
||||
|
# 2. Enable HTTPS web management on your switch |
||||
|
# |
||||
|
# Usage: |
||||
|
# 1. Ensure the switch has firmware V2.80 or later. |
||||
|
# 2. Ensure the switch has HTTPS management enabled. |
||||
|
# 3. Set the appropriate environment variables for your environment. |
||||
|
# |
||||
|
# DEPLOY_ZYXEL_SWITCH - The switch hostname. (Default: _cdomain) |
||||
|
# DEPLOY_ZYXEL_SWITCH_USER - The webadmin user. (Default: admin) |
||||
|
# DEPLOY_ZYXEL_SWITCH_PASSWORD - The webadmin password for the switch. |
||||
|
# DEPLOY_ZYXEL_SWITCH_REBOOT - If "1" reboot after update. (Default: "0") |
||||
|
# |
||||
|
# 4. Run the deployment plugin: |
||||
|
# acme.sh --deploy --deploy-hook zyxel_gs1900 -d example.com |
||||
|
# |
||||
|
# returns 0 means success, otherwise error. |
||||
|
|
||||
|
#domain keyfile certfile cafile fullchain |
||||
|
zyxel_gs1900_deploy() { |
||||
|
_zyxel_gs1900_minimum_firmware_version="v2.80" |
||||
|
|
||||
|
_cdomain="$1" |
||||
|
_ckey="$2" |
||||
|
_ccert="$3" |
||||
|
_cca="$4" |
||||
|
_cfullchain="$5" |
||||
|
|
||||
|
_debug _cdomain "$_cdomain" |
||||
|
_debug2 _ckey "$_ckey" |
||||
|
_debug _ccert "$_ccert" |
||||
|
_debug _cca "$_cca" |
||||
|
_debug _cfullchain "$_cfullchain" |
||||
|
|
||||
|
_getdeployconf DEPLOY_ZYXEL_SWITCH |
||||
|
if [ -z "$DEPLOY_ZYXEL_SWITCH" ]; then |
||||
|
_zyxel_switch_host="$_cdomain" |
||||
|
else |
||||
|
_zyxel_switch_host="$DEPLOY_ZYXEL_SWITCH" |
||||
|
_savedeployconf DEPLOY_ZYXEL_SWITCH "$DEPLOY_ZYXEL_SWITCH" |
||||
|
fi |
||||
|
_debug2 DEPLOY_ZYXEL_SWITCH "$_zyxel_switch_host" |
||||
|
|
||||
|
_getdeployconf DEPLOY_ZYXEL_SWITCH_USER |
||||
|
if [ -z "$DEPLOY_ZYXEL_SWITCH_USER" ]; then |
||||
|
_zyxel_switch_user="admin" |
||||
|
else |
||||
|
_zyxel_switch_user="$DEPLOY_ZYXEL_SWITCH_USER" |
||||
|
_savedeployconf DEPLOY_ZYXEL_SWITCH_USER "$DEPLOY_ZYXEL_SWITCH_USER" |
||||
|
fi |
||||
|
_debug2 DEPLOY_ZYXEL_SWITCH_USER "$_zyxel_switch_user" |
||||
|
|
||||
|
_getdeployconf DEPLOY_ZYXEL_SWITCH_PASSWORD |
||||
|
if [ -z "$DEPLOY_ZYXEL_SWITCH_PASSWORD" ]; then |
||||
|
_zyxel_switch_password="1234" |
||||
|
else |
||||
|
_zyxel_switch_password="$DEPLOY_ZYXEL_SWITCH_PASSWORD" |
||||
|
_savedeployconf DEPLOY_ZYXEL_SWITCH_PASSWORD "$DEPLOY_ZYXEL_SWITCH_PASSWORD" |
||||
|
fi |
||||
|
_secure_debug2 DEPLOY_ZYXEL_SWITCH_PASSWORD "$_zyxel_switch_password" |
||||
|
|
||||
|
_getdeployconf DEPLOY_ZYXEL_SWITCH_REBOOT |
||||
|
if [ -z "$DEPLOY_ZYXEL_SWITCH_REBOOT" ]; then |
||||
|
_zyxel_switch_reboot="0" |
||||
|
else |
||||
|
_zyxel_switch_reboot="$DEPLOY_ZYXEL_SWITCH_REBOOT" |
||||
|
_savedeployconf DEPLOY_ZYXEL_SWITCH_REBOOT "$DEPLOY_ZYXEL_SWITCH_REBOOT" |
||||
|
fi |
||||
|
_debug2 DEPLOY_ZYXEL_SWITCH_REBOOT "$_zyxel_switch_reboot" |
||||
|
|
||||
|
_zyxel_switch_base_uri="https://${_zyxel_switch_host}" |
||||
|
|
||||
|
_info "Beginning to deploy to a Zyxel GS1900 series switch at ${_zyxel_switch_base_uri}." |
||||
|
_zyxel_gs1900_deployment_precheck || return $? |
||||
|
|
||||
|
_info "Logging into the switch web interface." |
||||
|
_zyxel_gs1900_login || return $? |
||||
|
|
||||
|
_info "Validating the switch is compatible with this deployment process." |
||||
|
_zyxel_gs1900_validate_device_compatibility || return $? |
||||
|
|
||||
|
_info "Uploading the certificate." |
||||
|
_zyxel_gs1900_upload_certificate || return $? |
||||
|
|
||||
|
if [ "$_zyxel_switch_reboot" = "1" ]; then |
||||
|
_info "Rebooting the switch." |
||||
|
_zyxel_gs1900_trigger_reboot || return $? |
||||
|
fi |
||||
|
|
||||
|
return 0 |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_deployment_precheck() { |
||||
|
# Initialize the keylength if it isn't already |
||||
|
if [ -z "$Le_Keylength" ]; then |
||||
|
Le_Keylength="" |
||||
|
fi |
||||
|
|
||||
|
if _isEccKey "$Le_Keylength"; then |
||||
|
_info "Warning: Zyxel GS1900 switches are not currently known to work with ECC keys!" |
||||
|
_info "You can continue, but your switch may reject your key." |
||||
|
elif [ -n "$Le_Keylength" ] && [ "$Le_Keylength" -gt "2048" ]; then |
||||
|
_info "Warning: Your RSA key length is greater than 2048!" |
||||
|
_info "You can continue, but you may experience performance issues in the web administration interface." |
||||
|
fi |
||||
|
|
||||
|
# Check the server for some common failure modes prior to authentication and certificate upload in order to avoid |
||||
|
# sending a certificate when we may not want to. |
||||
|
_post "username=test&password=test&login=true;" "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi" '' "POST" "application/x-www-form-urlencoded" >/dev/null 2>&1 |
||||
|
test_login_page_exitcode="$?" |
||||
|
if [ "$test_login_page_exitcode" -ne "0" ]; then |
||||
|
if [ "${ACME_USE_WGET:-0}" = "0" ] && [ "$test_login_page_exitcode" = "56" ]; then |
||||
|
_info "Warning: curl is returning exit code 56. Please re-run with --debug for more information." |
||||
|
_debug "If the above curl trace contains the error 'SSL routines::unexpected eof while reading, errno 0'" |
||||
|
_debug "please ensure you are running the latest versions of curl and openssl. For more information" |
||||
|
_debug "see: https://github.com/openssl/openssl/issues/18866#issuecomment-1194219601" |
||||
|
elif { [ "${ACME_USE_WGET:-0}" = "0" ] && [ "$test_login_page_exitcode" = "60" ]; } || { [ "${ACME_USE_WGET:-0}" = "1" ] && [ "$test_login_page_exitcode" = "5" ]; }; then |
||||
|
_err "The SSL certificate at $_zyxel_switch_base_uri could not be validated." |
||||
|
_err "Please double check your hostname, port, and that you are actually connecting to your switch." |
||||
|
_err "If the problem persists then please ensure that the certificate is not self-signed, has not" |
||||
|
_err "expired, and matches the switch hostname. If you expect validation to fail then you can disable" |
||||
|
_err "certificate validation by running with --insecure." |
||||
|
return 1 |
||||
|
else |
||||
|
_err "Failed to submit the initial login attempt to $_zyxel_switch_base_uri." |
||||
|
return 1 |
||||
|
fi |
||||
|
fi |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_login() { |
||||
|
# Login to the switch and set the appropriate auth cookie in _H1 |
||||
|
username_encoded=$(printf "%s" "$_zyxel_switch_user" | _url_encode) |
||||
|
password_encoded=$(_zyxel_gs1900_password_obfuscate "$_zyxel_switch_password" | _url_encode) |
||||
|
|
||||
|
login_response=$(_post "username=${username_encoded}&password=${password_encoded}&login=true;" "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi" '' "POST" "application/x-www-form-urlencoded" | tr -d '\n') |
||||
|
auth_response=$(_post "authId=${login_response}&login_chk=true" "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi" '' "POST" "application/x-www-form-urlencoded" | tr -d '\n') |
||||
|
if [ "$auth_response" != "OK" ]; then |
||||
|
_err "Login failed due to invalid credentials." |
||||
|
_err "Please double check the configured username and password and try again." |
||||
|
return 1 |
||||
|
fi |
||||
|
|
||||
|
sessionid=$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'HTTPS_XSSID=[^;]*;' | tr -d ';') |
||||
|
_secure_debug2 "sessionid" "$sessionid" |
||||
|
|
||||
|
export _H1="Cookie: $sessionid" |
||||
|
_secure_debug2 "_H1" "$_H1" |
||||
|
|
||||
|
return 0 |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_validate_device_compatibility() { |
||||
|
# Check the switches model and firmware version and throw errors |
||||
|
# if this script isn't compatible. |
||||
|
device_info_html=$(_get "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=12" | tr -d '\n') |
||||
|
|
||||
|
model_name=$(_zyxel_gs1900_get_model "$device_info_html") |
||||
|
_debug2 "model_name" "$model_name" |
||||
|
if [ -z "$model_name" ]; then |
||||
|
_err "Could not find the switch model name." |
||||
|
_err "Please re-run with --debug and report a bug." |
||||
|
return $? |
||||
|
fi |
||||
|
|
||||
|
if ! expr "$model_name" : "GS1900-" >/dev/null; then |
||||
|
_err "Switch is an unsupported model: $model_name" |
||||
|
return 1 |
||||
|
fi |
||||
|
|
||||
|
firmware_version=$(_zyxel_gs1900_get_firmware_version "$device_info_html") |
||||
|
_debug2 "firmware_version" "$firmware_version" |
||||
|
if [ -z "$firmware_version" ]; then |
||||
|
_err "Could not find the switch firmware version." |
||||
|
_err "Please re-run with --debug and report a bug." |
||||
|
return $? |
||||
|
fi |
||||
|
|
||||
|
_debug2 "_zyxel_gs1900_minimum_firmware_version" "$_zyxel_gs1900_minimum_firmware_version" |
||||
|
minimum_major_version=$(_zyxel_gs1900_parse_major_version "$_zyxel_gs1900_minimum_firmware_version") |
||||
|
_debug2 "minimum_major_version" "$minimum_major_version" |
||||
|
minimum_minor_version=$(_zyxel_gs1900_parse_minor_version "$_zyxel_gs1900_minimum_firmware_version") |
||||
|
_debug2 "minimum_minor_version" "$minimum_minor_version" |
||||
|
|
||||
|
_debug2 "firmware_version" "$firmware_version" |
||||
|
firmware_major_version=$(_zyxel_gs1900_parse_major_version "$firmware_version") |
||||
|
_debug2 "firmware_major_version" "$firmware_major_version" |
||||
|
firmware_minor_version=$(_zyxel_gs1900_parse_minor_version "$firmware_version") |
||||
|
_debug2 "firmware_minor_version" "$firmware_minor_version" |
||||
|
|
||||
|
_ret=0 |
||||
|
if [ "$firmware_major_version" -lt "$minimum_major_version" ]; then |
||||
|
_ret=1 |
||||
|
elif [ "$firmware_major_version" -eq "$minimum_major_version" ] && [ "$firmware_minor_version" -lt "$minimum_minor_version" ]; then |
||||
|
_ret=1 |
||||
|
fi |
||||
|
|
||||
|
if [ "$_ret" != "0" ]; then |
||||
|
_err "Unsupported firmware version $firmware_version. Please upgrade to at least version $_zyxel_gs1900_minimum_firmware_version." |
||||
|
fi |
||||
|
|
||||
|
return $? |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_upload_certificate() { |
||||
|
# Generate a PKCS12 certificate with a temporary password since the web interface |
||||
|
# requires a password be present. Then upload that certificate. |
||||
|
temp_cert_password=$(head /dev/urandom | tr -dc 'A-Za-z0-9' | head -c 64) |
||||
|
_secure_debug2 "temp_cert_password" "$temp_cert_password" |
||||
|
|
||||
|
temp_pkcs12="$(_mktemp)" |
||||
|
_debug2 "temp_pkcs12" "$temp_pkcs12" |
||||
|
_toPkcs "$temp_pkcs12" "$_ckey" "$_ccert" "$_cca" "$temp_cert_password" |
||||
|
if [ "$?" != "0" ]; then |
||||
|
_err "Failed to generate a pkcs12 certificate." |
||||
|
_err "Please re-run with --debug and report a bug." |
||||
|
|
||||
|
# ensure the temporary certificate file is cleaned up |
||||
|
[ -f "${temp_pkcs12}" ] && rm -f "${temp_pkcs12}" |
||||
|
|
||||
|
return $? |
||||
|
fi |
||||
|
|
||||
|
upload_page_html=$(_get "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=5914" | tr -d '\n') |
||||
|
|
||||
|
# Get the two validity dates by looking for their date format in the page (i.e. Mar 5 05:48:48 2024 GMT) |
||||
|
existing_validity=$(_zyxel_html_extract_dates "$upload_page_html") |
||||
|
_debug2 "existing_validity" "$existing_validity" |
||||
|
|
||||
|
form_xss_value=$(printf "%s" "$upload_page_html" | _egrep_o 'name="XSSID"\s*value="[^"]+"' | sed 's/^.*="\([^"]\{1,\}\)"$/\1/g') |
||||
|
_secure_debug2 "form_xss_value" "$form_xss_value" |
||||
|
|
||||
|
# If a certificate exists on the switch already there will be two XSS keys - we want the first one |
||||
|
form_xss_value=$(printf "%s" "$form_xss_value" | head -n 1) |
||||
|
_secure_debug2 "form_xss_value" "$form_xss_value" |
||||
|
|
||||
|
_info "Generating the certificate upload request" |
||||
|
upload_post_request="$(_mktemp)" |
||||
|
upload_post_boundary="---------------------------$(date +%Y%m%d%H%M%S)" |
||||
|
|
||||
|
{ |
||||
|
printf -- "--%s\r\n" "${upload_post_boundary}" |
||||
|
printf "Content-Disposition: form-data; name=\"XSSID\"\r\n\r\n%s\r\n" "${form_xss_value}" |
||||
|
printf -- "--%s\r\n" "${upload_post_boundary}" |
||||
|
printf "Content-Disposition: form-data; name=\"http_file\"; filename=\"temp_pkcs12.pfx\"\r\n" |
||||
|
printf "Content-Type: application/pkcs12\r\n\r\n" |
||||
|
cat "${temp_pkcs12}" |
||||
|
printf "\r\n" |
||||
|
printf -- "--%s\r\n" "${upload_post_boundary}" |
||||
|
printf "Content-Disposition: form-data; name=\"pwd\"\r\n\r\n%s\r\n" "${temp_cert_password}" |
||||
|
printf -- "--%s\r\n" "${upload_post_boundary}" |
||||
|
printf "Content-Disposition: form-data; name=\"cmd\"\r\n\r\n%s\r\n" "31" |
||||
|
printf -- "--%s\r\n" "${upload_post_boundary}" |
||||
|
printf "Content-Disposition: form-data; name=\"sysSubmit\"\r\n\r\n%s\r\n" "Import" |
||||
|
printf -- "--%s--\r\n" "${upload_post_boundary}" |
||||
|
} >"${upload_post_request}" |
||||
|
|
||||
|
_info "Upload certificate to the switch" |
||||
|
|
||||
|
# Unfortunately we cannot rely upon the switch response across switch models |
||||
|
# to return a consistent body return - so we cannot inspect the result of this |
||||
|
# upload to determine success. We will need to re-query the certificates page |
||||
|
# and compare the validity dates to try and identify if they have changed. |
||||
|
_post "${upload_post_request}" "${_zyxel_switch_base_uri}/cgi-bin/httpuploadcert.cgi" '' "POST" "multipart/form-data; boundary=${upload_post_boundary}" '1' >/dev/null 2>&1 |
||||
|
rm "${upload_post_request}" |
||||
|
|
||||
|
# Pause for a few seconds to give the switch a chance to process the certificate |
||||
|
# For some reason I've found this to be necessary on my GS1900-24E |
||||
|
_debug2 "Waiting 4 seconds for the switch to process the newly uploaded certificate." |
||||
|
sleep "4" |
||||
|
|
||||
|
_debug2 "Checking to see if the certificate updated properly" |
||||
|
upload_page_html=$(_get "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=5914" | tr -d '\n') |
||||
|
new_validity=$(_zyxel_html_extract_dates "$upload_page_html") |
||||
|
_debug2 "new_validity" "$existing_validity" |
||||
|
|
||||
|
_ret=0 |
||||
|
if [ "$existing_validity" != "$new_validity" ]; then |
||||
|
_debug2 "The certificate validity has changed. The upload must have succeeded." |
||||
|
else |
||||
|
_ret=1 |
||||
|
_err "The certificate upload does not appear to have worked." |
||||
|
_err "Either the certificate provided has not changed, or the switch is returning an unexpected error." |
||||
|
_err "Please re-run with --debug 2 and review for unexpected errors. If none can be found please submit a bug." |
||||
|
fi |
||||
|
|
||||
|
# ensure the temporary files are cleaned up |
||||
|
[ -f "${temp_pkcs12}" ] && rm -f "${temp_pkcs12}" |
||||
|
|
||||
|
return $_ret |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_trigger_reboot() { |
||||
|
# Trigger a reboot via the management reboot page in the web ui |
||||
|
reboot_page_html=$(_get "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi?cmd=5888" | tr -d '\n') |
||||
|
reboot_xss_value=$(printf "%s" "$reboot_page_html" | _egrep_o 'name="XSSID"\s*value="[^"]+"' | sed 's/^.*="\([^"]\{1,\}\)"$/\1/g') |
||||
|
_secure_debug2 "reboot_xss_value" "$reboot_xss_value" |
||||
|
|
||||
|
reboot_response_html=$(_post "XSSID=${reboot_xss_value}&cmd=5889&sysSubmit=Reboot" "${_zyxel_switch_base_uri}/cgi-bin/dispatcher.cgi" '' "POST" "application/x-www-form-urlencoded") |
||||
|
reboot_message=$(printf "%s" "$reboot_response_html" | tr -d '\t\r\n\v\f' | _egrep_o "Rebooting now...") |
||||
|
|
||||
|
if [ -z "$reboot_message" ]; then |
||||
|
_err "Failed to trigger switch reboot!" |
||||
|
return 1 |
||||
|
fi |
||||
|
|
||||
|
return 0 |
||||
|
} |
||||
|
|
||||
|
# html |
||||
|
_zyxel_html_extract_dates() { |
||||
|
html="$1" |
||||
|
# Extract all dates in the html which match the format "Mar 5 05:48:48 2024 GMT" |
||||
|
# Note that the number of spaces between the format sections may differ for some reason |
||||
|
printf "%s" "$html" | _egrep_o '[A-Za-z]{3}\s+[0-9]+\s+[0-9]+:[0-9]+:[0-9]+\s+[0-9]+\s+[A-Za-z]+' |
||||
|
} |
||||
|
|
||||
|
# html label |
||||
|
_zyxel_html_table_lookup() { |
||||
|
# Look up a value in the html representing the status page of the switch |
||||
|
# when provided with the html of the page and the label (i.e. "Model Name:") |
||||
|
html="$1" |
||||
|
label=$(printf "%s" "$2" | tr -d ' ') |
||||
|
lookup_result=$(printf "%s" "$html" | tr -d "\t\r\n\v\f" | sed 's/<tr>/\n<tr>/g' | sed 's/<td[^>]*>/<td>/g' | tr -d ' ' | grep -i "$label" | sed "s/<tr><td>$label<\/td><td>\([^<]\{1,\}\)<\/td><\/tr>/\1/i") |
||||
|
printf "%s" "$lookup_result" |
||||
|
return 0 |
||||
|
} |
||||
|
|
||||
|
# password |
||||
|
_zyxel_gs1900_password_obfuscate() { |
||||
|
# Return the password obfuscated via the same method used by the |
||||
|
# Zyxel Web UI login process |
||||
|
login_allowed_chrs="0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" |
||||
|
login_pw_arg="$1" |
||||
|
login_pw_len="${#login_pw_arg}" |
||||
|
login_pw_index="${#login_pw_arg}" |
||||
|
|
||||
|
login_pw_obfuscated="" |
||||
|
|
||||
|
i=1 |
||||
|
while [ "$i" -le "$(_math "321" - "$login_pw_index")" ]; do |
||||
|
append_chr="0" |
||||
|
|
||||
|
if [ "$((i % 5))" -eq 0 ] && [ "$login_pw_index" -gt 0 ]; then |
||||
|
login_pw_index=$(_math "$login_pw_index" - 1) |
||||
|
append_chr=$(echo "$login_pw_arg" | awk -v var="$login_pw_index" '{ str=substr($0,var+1,1); print str }') |
||||
|
elif [ "$i" -eq 123 ]; then |
||||
|
if [ "${login_pw_len}" -lt 10 ]; then |
||||
|
# The 123rd character must be 0 if the login_pw_arg is less than 10 characters |
||||
|
append_chr="0" |
||||
|
else |
||||
|
# Or the login_pw_arg divided by 10 rounded down if greater than or equal to 10 |
||||
|
append_chr=$(_math "$login_pw_len" / 10) |
||||
|
fi |
||||
|
elif [ $i -eq 289 ]; then |
||||
|
# the 289th character must be the len % 10 |
||||
|
append_chr=$(_math "$login_pw_len" % 10) |
||||
|
else |
||||
|
# add random characters for the sake of obfuscation... |
||||
|
rand=$(head -q /dev/urandom | tr -cd '0-9' | head -c5 | sed 's/^0\{1,\}//') |
||||
|
rand=$(printf "%5d" "$rand") |
||||
|
rand_idx=$(_math "$rand" % "${#login_allowed_chrs}") |
||||
|
append_chr=$(echo "$login_allowed_chrs" | awk -v var="$rand_idx" '{ str=substr($0,var+1,1); print str }') |
||||
|
fi |
||||
|
|
||||
|
login_pw_obfuscated="${login_pw_obfuscated}${append_chr}" |
||||
|
i=$(_math "$i" + 1) |
||||
|
done |
||||
|
|
||||
|
printf "%s" "$login_pw_obfuscated" |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_get_model() { |
||||
|
html="$1" |
||||
|
model_name=$(_zyxel_html_table_lookup "$html" "Model Name:") |
||||
|
printf "%s" "$model_name" |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_get_firmware_version() { |
||||
|
html="$1" |
||||
|
firmware_version=$(_zyxel_html_table_lookup "$html" "Firmware Version:" | _egrep_o "V[^.]+.[^(]+") |
||||
|
printf "%s" "$firmware_version" |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_parse_major_version() { |
||||
|
printf "%s" "$1" | sed 's/^V\([0-9]\{1,\}\).\{1,\}$/\1/gi' |
||||
|
} |
||||
|
|
||||
|
_zyxel_gs1900_parse_minor_version() { |
||||
|
printf "%s" "$1" | sed 's/^.\{1,\}\.\([0-9]\{1,\}\)$/\1/gi' |
||||
|
} |
||||
Write
Preview
Loading…
Cancel
Save
Reference in new issue