diff --git a/.github/workflows/FreeBSD.yml b/.github/workflows/FreeBSD.yml index 6a82156d..5d032769 100644 --- a/.github/workflows/FreeBSD.yml +++ b/.github/workflows/FreeBSD.yml @@ -24,20 +24,23 @@ jobs: CA_ECDSA: "" CA: "" CA_EMAIL: "" + TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1 - TEST_ACME_Server: "ZeroSSL.com" CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA" CA: "ZeroSSL RSA Domain Secure Site CA" CA_EMAIL: "githubtest@acme.sh" - runs-on: macos-latest + TEST_PREFERRED_CHAIN: "" + runs-on: macos-10.15 env: TEST_LOCAL: 1 TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }} CA_ECDSA: ${{ matrix.CA_ECDSA }} CA: ${{ matrix.CA }} CA_EMAIL: ${{ matrix.CA_EMAIL }} + TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }} steps: - uses: actions/checkout@v2 - - uses: vmactions/cf-tunnel@v0.0.2 + - uses: vmactions/cf-tunnel@v0.0.3 id: tunnel with: protocol: http @@ -46,9 +49,9 @@ jobs: run: echo "TestingDomain=${{steps.tunnel.outputs.server}}" >> $GITHUB_ENV - name: Clone acmetest run: cd .. && git clone https://github.com/acmesh-official/acmetest.git && cp -r acme.sh acmetest/ - - uses: vmactions/freebsd-vm@v0.1.4 + - uses: vmactions/freebsd-vm@v0.1.5 with: - envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL' + envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN' nat: | "8080": "80" prepare: pkg install -y socat curl diff --git a/.github/workflows/Linux.yml b/.github/workflows/Linux.yml index 7e7eba87..cba708b3 100644 --- a/.github/workflows/Linux.yml +++ b/.github/workflows/Linux.yml @@ -24,6 +24,7 @@ jobs: runs-on: ubuntu-latest env: TEST_LOCAL: 1 + TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1 steps: - uses: actions/checkout@v2 - name: Clone acmetest diff --git a/.github/workflows/MacOS.yml b/.github/workflows/MacOS.yml index 85ec7527..4b529f6a 100644 --- a/.github/workflows/MacOS.yml +++ b/.github/workflows/MacOS.yml @@ -24,10 +24,12 @@ jobs: CA_ECDSA: "" CA: "" CA_EMAIL: "" + TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1 - TEST_ACME_Server: "ZeroSSL.com" CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA" CA: "ZeroSSL RSA Domain Secure Site CA" CA_EMAIL: "githubtest@acme.sh" + TEST_PREFERRED_CHAIN: "" runs-on: macos-latest env: TEST_LOCAL: 1 @@ -35,6 +37,7 @@ jobs: CA_ECDSA: ${{ matrix.CA_ECDSA }} CA: ${{ matrix.CA }} CA_EMAIL: ${{ matrix.CA_EMAIL }} + TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }} steps: - uses: actions/checkout@v2 - name: Install tools diff --git a/.github/workflows/Solaris.yml b/.github/workflows/Solaris.yml index 9d1c46ac..4df10099 100644 --- a/.github/workflows/Solaris.yml +++ b/.github/workflows/Solaris.yml @@ -24,20 +24,23 @@ jobs: CA_ECDSA: "" CA: "" CA_EMAIL: "" + TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1 - TEST_ACME_Server: "ZeroSSL.com" CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA" CA: "ZeroSSL RSA Domain Secure Site CA" CA_EMAIL: "githubtest@acme.sh" - runs-on: macos-latest + TEST_PREFERRED_CHAIN: "" + runs-on: macos-10.15 env: TEST_LOCAL: 1 TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }} CA_ECDSA: ${{ matrix.CA_ECDSA }} CA: ${{ matrix.CA }} CA_EMAIL: ${{ matrix.CA_EMAIL }} + TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }} steps: - uses: actions/checkout@v2 - - uses: vmactions/cf-tunnel@v0.0.2 + - uses: vmactions/cf-tunnel@v0.0.3 id: tunnel with: protocol: http @@ -48,7 +51,7 @@ jobs: run: cd .. && git clone https://github.com/acmesh-official/acmetest.git && cp -r acme.sh acmetest/ - uses: vmactions/solaris-vm@v0.0.3 with: - envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL' + envs: 'TEST_LOCAL TestingDomain TEST_ACME_Server CA_ECDSA CA CA_EMAIL TEST_PREFERRED_CHAIN' nat: | "8080": "80" prepare: pkgutil -y -i socat curl diff --git a/.github/workflows/Ubuntu.yml b/.github/workflows/Ubuntu.yml index af74965a..28b06541 100644 --- a/.github/workflows/Ubuntu.yml +++ b/.github/workflows/Ubuntu.yml @@ -24,10 +24,12 @@ jobs: CA_ECDSA: "" CA: "" CA_EMAIL: "" + TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1 - TEST_ACME_Server: "ZeroSSL.com" CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA" CA: "ZeroSSL RSA Domain Secure Site CA" CA_EMAIL: "githubtest@acme.sh" + TEST_PREFERRED_CHAIN: "" runs-on: ubuntu-latest env: @@ -37,6 +39,7 @@ jobs: CA: ${{ matrix.CA }} CA_EMAIL: ${{ matrix.CA_EMAIL }} NO_ECC_384: ${{ matrix.NO_ECC_384 }} + TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }} steps: - uses: actions/checkout@v2 - name: Install tools diff --git a/.github/workflows/Windows.yml b/.github/workflows/Windows.yml index 8c8e2842..2d7eeeae 100644 --- a/.github/workflows/Windows.yml +++ b/.github/workflows/Windows.yml @@ -24,10 +24,12 @@ jobs: CA_ECDSA: "" CA: "" CA_EMAIL: "" + TEST_PREFERRED_CHAIN: (STAGING) Pretend Pear X1 - TEST_ACME_Server: "ZeroSSL.com" CA_ECDSA: "ZeroSSL ECC Domain Secure Site CA" CA: "ZeroSSL RSA Domain Secure Site CA" CA_EMAIL: "githubtest@acme.sh" + TEST_PREFERRED_CHAIN: "" runs-on: windows-latest env: TEST_ACME_Server: ${{ matrix.TEST_ACME_Server }} @@ -37,6 +39,7 @@ jobs: TEST_LOCAL: 1 #The 80 port is used by Windows server, we have to use a custom port, tunnel will also use this port. Le_HTTPPort: 8888 + TEST_PREFERRED_CHAIN: ${{ matrix.TEST_PREFERRED_CHAIN }} steps: - name: Set git to use LF run: | @@ -49,12 +52,12 @@ jobs: shell: cmd - name: Install cygwin additional packages run: | - C:\tools\cygwin\cygwinsetup.exe -qgnNdO -R C:/tools/cygwin -s http://mirrors.kernel.org/sourceware/cygwin/ -P socat,curl,cron,unzip,git + C:\tools\cygwin\cygwinsetup.exe -qgnNdO -R C:/tools/cygwin -s http://mirrors.kernel.org/sourceware/cygwin/ -P socat,curl,cron,unzip,git,xxd shell: cmd - name: Set ENV shell: cmd run: | - echo PATH=C:\tools\cygwin\bin;C:\tools\cygwin\usr\bin >> %GITHUB_ENV% + echo PATH=C:\tools\cygwin\bin;C:\tools\cygwin\usr\bin;%PATH% >> %GITHUB_ENV% - name: Check ENV shell: cmd run: | diff --git a/acme.sh b/acme.sh index 0c4928f5..66291224 100755 --- a/acme.sh +++ b/acme.sh @@ -3168,7 +3168,7 @@ _checkConf() { for included in $(cat "$2" | tr "\t" " " | grep "^ *include *.*;" | sed "s/include //" | tr -d " ;"); do _debug "check included $included" if ! _startswith "$included" "/" && _exists dirname; then - _relpath="$(dirname "$_c_file")" + _relpath="$(dirname "$2")" _debug "_relpath" "$_relpath" included="$_relpath/$included" fi @@ -4222,12 +4222,6 @@ issue() { return 1 fi - _debug "Using ACME_DIRECTORY: $ACME_DIRECTORY" - - if ! _initAPI; then - return 1 - fi - if [ -f "$DOMAIN_CONF" ]; then Le_NextRenewTime=$(_readdomainconf Le_NextRenewTime) _debug Le_NextRenewTime "$Le_NextRenewTime" @@ -4247,6 +4241,11 @@ issue() { fi fi + _debug "Using ACME_DIRECTORY: $ACME_DIRECTORY" + if ! _initAPI; then + return 1 + fi + _savedomainconf "Le_Domain" "$_main_domain" _savedomainconf "Le_Alt" "$_alt_domains" _savedomainconf "Le_Webroot" "$_web_roots" @@ -4934,7 +4933,9 @@ $_authorizations_map" echo "$response" >"$CERT_PATH" _split_cert_chain "$CERT_PATH" "$CERT_FULLCHAIN_PATH" "$CA_CERT_PATH" - + if [ -z "$_preferred_chain" ]; then + _preferred_chain=$(_readcaconf DEFAULT_PREFERRED_CHAIN) + fi if [ "$_preferred_chain" ] && [ -f "$CERT_FULLCHAIN_PATH" ]; then if [ "$DEBUG" ]; then _debug "default chain issuers: " "$(_get_chain_issuers "$CERT_FULLCHAIN_PATH")" @@ -5129,7 +5130,6 @@ renew() { CA_CONF="" _debug3 "initpath again." _initpath "$Le_Domain" "$_isEcc" - _initAPI fi if [ -z "$FORCE" ] && [ "$Le_NextRenewTime" ] && [ "$(_time)" -lt "$Le_NextRenewTime" ]; then @@ -6547,6 +6547,8 @@ Commands: --deactivate Deactivate the domain authz, professional use. --set-default-ca Used with '--server', Set the default CA to use. See: $_SERVER_WIKI + --set-default-chain Set the default preferred chain for a CA. + See: $_PREFERRED_CHAIN_WIKI Parameters: @@ -6833,6 +6835,18 @@ setdefaultca() { _info "Changed default CA to: $(__green "$ACME_DIRECTORY")" } +#preferred-chain +setdefaultchain() { + _initpath + _preferred_chain="$1" + if [ -z "$_preferred_chain" ]; then + _err "Please give a '--preferred-chain value' value." + return 1 + fi + mkdir -p "$CA_DIR" + _savecaconf "DEFAULT_PREFERRED_CHAIN" "$_preferred_chain" +} + _process() { _CMD="" _domain="" @@ -6984,6 +6998,9 @@ _process() { --set-default-ca) _CMD="setdefaultca" ;; + --set-default-chain) + _CMD="setdefaultchain" + ;; -d | --domain) _dvalue="$2" @@ -7514,6 +7531,9 @@ _process() { setdefaultca) setdefaultca ;; + setdefaultchain) + setdefaultchain "$_preferred_chain" + ;; *) if [ "$_CMD" ]; then _err "Invalid command: $_CMD" diff --git a/deploy/haproxy.sh b/deploy/haproxy.sh index 0a45ee07..c255059d 100644 --- a/deploy/haproxy.sh +++ b/deploy/haproxy.sh @@ -54,11 +54,6 @@ haproxy_deploy() { DEPLOY_HAPROXY_ISSUER_DEFAULT="no" DEPLOY_HAPROXY_RELOAD_DEFAULT="true" - if [ -f "${DOMAIN_CONF}" ]; then - # shellcheck disable=SC1090 - . "${DOMAIN_CONF}" - fi - _debug _cdomain "${_cdomain}" _debug _ckey "${_ckey}" _debug _ccert "${_ccert}" @@ -66,6 +61,8 @@ haproxy_deploy() { _debug _cfullchain "${_cfullchain}" # PEM_PATH is optional. If not provided then assume "${DEPLOY_HAPROXY_PEM_PATH_DEFAULT}" + _getdeployconf DEPLOY_HAPROXY_PEM_PATH + _debug2 DEPLOY_HAPROXY_PEM_PATH "${DEPLOY_HAPROXY_PEM_PATH}" if [ -n "${DEPLOY_HAPROXY_PEM_PATH}" ]; then Le_Deploy_haproxy_pem_path="${DEPLOY_HAPROXY_PEM_PATH}" _savedomainconf Le_Deploy_haproxy_pem_path "${Le_Deploy_haproxy_pem_path}" @@ -82,6 +79,8 @@ haproxy_deploy() { fi # PEM_NAME is optional. If not provided then assume "${DEPLOY_HAPROXY_PEM_NAME_DEFAULT}" + _getdeployconf DEPLOY_HAPROXY_PEM_NAME + _debug2 DEPLOY_HAPROXY_PEM_NAME "${DEPLOY_HAPROXY_PEM_NAME}" if [ -n "${DEPLOY_HAPROXY_PEM_NAME}" ]; then Le_Deploy_haproxy_pem_name="${DEPLOY_HAPROXY_PEM_NAME}" _savedomainconf Le_Deploy_haproxy_pem_name "${Le_Deploy_haproxy_pem_name}" @@ -90,6 +89,8 @@ haproxy_deploy() { fi # BUNDLE is optional. If not provided then assume "${DEPLOY_HAPROXY_BUNDLE_DEFAULT}" + _getdeployconf DEPLOY_HAPROXY_BUNDLE + _debug2 DEPLOY_HAPROXY_BUNDLE "${DEPLOY_HAPROXY_BUNDLE}" if [ -n "${DEPLOY_HAPROXY_BUNDLE}" ]; then Le_Deploy_haproxy_bundle="${DEPLOY_HAPROXY_BUNDLE}" _savedomainconf Le_Deploy_haproxy_bundle "${Le_Deploy_haproxy_bundle}" @@ -98,6 +99,8 @@ haproxy_deploy() { fi # ISSUER is optional. If not provided then assume "${DEPLOY_HAPROXY_ISSUER_DEFAULT}" + _getdeployconf DEPLOY_HAPROXY_ISSUER + _debug2 DEPLOY_HAPROXY_ISSUER "${DEPLOY_HAPROXY_ISSUER}" if [ -n "${DEPLOY_HAPROXY_ISSUER}" ]; then Le_Deploy_haproxy_issuer="${DEPLOY_HAPROXY_ISSUER}" _savedomainconf Le_Deploy_haproxy_issuer "${Le_Deploy_haproxy_issuer}" @@ -106,6 +109,8 @@ haproxy_deploy() { fi # RELOAD is optional. If not provided then assume "${DEPLOY_HAPROXY_RELOAD_DEFAULT}" + _getdeployconf DEPLOY_HAPROXY_RELOAD + _debug2 DEPLOY_HAPROXY_RELOAD "${DEPLOY_HAPROXY_RELOAD}" if [ -n "${DEPLOY_HAPROXY_RELOAD}" ]; then Le_Deploy_haproxy_reload="${DEPLOY_HAPROXY_RELOAD}" _savedomainconf Le_Deploy_haproxy_reload "${Le_Deploy_haproxy_reload}" @@ -190,7 +195,7 @@ haproxy_deploy() { _info "Updating OCSP stapling info" _debug _ocsp "${_ocsp}" _info "Extracting OCSP URL" - _ocsp_url=$(openssl x509 -noout -ocsp_uri -in "${_pem}") + _ocsp_url=$(${ACME_OPENSSL_BIN:-openssl} x509 -noout -ocsp_uri -in "${_pem}") _debug _ocsp_url "${_ocsp_url}" # Only process OCSP if URL was present @@ -203,9 +208,9 @@ haproxy_deploy() { # Only process the certificate if we have a .issuer file if [ -r "${_issuer}" ]; then # Check if issuer cert is also a root CA cert - _subjectdn=$(openssl x509 -in "${_issuer}" -subject -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10) + _subjectdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -subject -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10) _debug _subjectdn "${_subjectdn}" - _issuerdn=$(openssl x509 -in "${_issuer}" -issuer -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10) + _issuerdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -issuer -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10) _debug _issuerdn "${_issuerdn}" _info "Requesting OCSP response" # If the issuer is a CA cert then our command line has "-CAfile" added @@ -216,7 +221,7 @@ haproxy_deploy() { fi _debug _cafile_argument "${_cafile_argument}" # if OpenSSL/LibreSSL is v1.1 or above, the format for the -header option has changed - _openssl_version=$(openssl version | cut -d' ' -f2) + _openssl_version=$(${ACME_OPENSSL_BIN:-openssl} version | cut -d' ' -f2) _debug _openssl_version "${_openssl_version}" _openssl_major=$(echo "${_openssl_version}" | cut -d '.' -f1) _openssl_minor=$(echo "${_openssl_version}" | cut -d '.' -f2) @@ -226,7 +231,7 @@ haproxy_deploy() { _header_sep=" " fi # Request the OCSP response from the issuer and store it - _openssl_ocsp_cmd="openssl ocsp \ + _openssl_ocsp_cmd="${ACME_OPENSSL_BIN:-openssl} ocsp \ -issuer \"${_issuer}\" \ -cert \"${_pem}\" \ -url \"${_ocsp_url}\" \ diff --git a/deploy/kong.sh b/deploy/kong.sh index 1e1e310c..b8facedf 100755 --- a/deploy/kong.sh +++ b/deploy/kong.sh @@ -45,7 +45,7 @@ kong_deploy() { #Generate data for request (Multipart/form-data with mixed content) if [ -z "$ssl_uuid" ]; then #set sni to domain - content="--$delim${nl}Content-Disposition: form-data; name=\"snis\"${nl}${nl}$_cdomain" + content="--$delim${nl}Content-Disposition: form-data; name=\"snis[]\"${nl}${nl}$_cdomain" fi #add key content="$content${nl}--$delim${nl}Content-Disposition: form-data; name=\"key\"; filename=\"$(basename "$_ckey")\"${nl}Content-Type: application/octet-stream${nl}${nl}$(cat "$_ckey")" diff --git a/deploy/lighttpd.sh b/deploy/lighttpd.sh new file mode 100644 index 00000000..71f64b96 --- /dev/null +++ b/deploy/lighttpd.sh @@ -0,0 +1,280 @@ +#!/usr/bin/env sh + +# Script for acme.sh to deploy certificates to lighttpd +# +# The following variables can be exported: +# +# export DEPLOY_LIGHTTPD_PEM_NAME="${domain}.pem" +# +# Defines the name of the PEM file. +# Defaults to ".pem" +# +# export DEPLOY_LIGHTTPD_PEM_PATH="/etc/lighttpd" +# +# Defines location of PEM file for Lighttpd. +# Defaults to /etc/lighttpd +# +# export DEPLOY_LIGHTTPD_RELOAD="systemctl reload lighttpd" +# +# OPTIONAL: Reload command used post deploy +# This defaults to be a no-op (ie "true"). +# It is strongly recommended to set this something that makes sense +# for your distro. +# +# export DEPLOY_LIGHTTPD_ISSUER="yes" +# +# OPTIONAL: Places CA file as "${DEPLOY_LIGHTTPD_PEM}.issuer" +# Note: Required for OCSP stapling to work +# +# export DEPLOY_LIGHTTPD_BUNDLE="no" +# +# OPTIONAL: Deploy this certificate as part of a multi-cert bundle +# This adds a suffix to the certificate based on the certificate type +# eg RSA certificates will have .rsa as a suffix to the file name +# Lighttpd will load all certificates and provide one or the other +# depending on client capabilities +# Note: This functionality requires Lighttpd was compiled against +# a version of OpenSSL that supports this. +# + +######## Public functions ##################### + +#domain keyfile certfile cafile fullchain +lighttpd_deploy() { + _cdomain="$1" + _ckey="$2" + _ccert="$3" + _cca="$4" + _cfullchain="$5" + + # Some defaults + DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT="/etc/lighttpd" + DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT="${_cdomain}.pem" + DEPLOY_LIGHTTPD_BUNDLE_DEFAULT="no" + DEPLOY_LIGHTTPD_ISSUER_DEFAULT="yes" + DEPLOY_LIGHTTPD_RELOAD_DEFAULT="true" + + _debug _cdomain "${_cdomain}" + _debug _ckey "${_ckey}" + _debug _ccert "${_ccert}" + _debug _cca "${_cca}" + _debug _cfullchain "${_cfullchain}" + + # PEM_PATH is optional. If not provided then assume "${DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT}" + _getdeployconf DEPLOY_LIGHTTPD_PEM_PATH + _debug2 DEPLOY_LIGHTTPD_PEM_PATH "${DEPLOY_LIGHTTPD_PEM_PATH}" + if [ -n "${DEPLOY_LIGHTTPD_PEM_PATH}" ]; then + Le_Deploy_lighttpd_pem_path="${DEPLOY_LIGHTTPD_PEM_PATH}" + _savedomainconf Le_Deploy_lighttpd_pem_path "${Le_Deploy_lighttpd_pem_path}" + elif [ -z "${Le_Deploy_lighttpd_pem_path}" ]; then + Le_Deploy_lighttpd_pem_path="${DEPLOY_LIGHTTPD_PEM_PATH_DEFAULT}" + fi + + # Ensure PEM_PATH exists + if [ -d "${Le_Deploy_lighttpd_pem_path}" ]; then + _debug "PEM_PATH ${Le_Deploy_lighttpd_pem_path} exists" + else + _err "PEM_PATH ${Le_Deploy_lighttpd_pem_path} does not exist" + return 1 + fi + + # PEM_NAME is optional. If not provided then assume "${DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT}" + _getdeployconf DEPLOY_LIGHTTPD_PEM_NAME + _debug2 DEPLOY_LIGHTTPD_PEM_NAME "${DEPLOY_LIGHTTPD_PEM_NAME}" + if [ -n "${DEPLOY_LIGHTTPD_PEM_NAME}" ]; then + Le_Deploy_lighttpd_pem_name="${DEPLOY_LIGHTTPD_PEM_NAME}" + _savedomainconf Le_Deploy_lighttpd_pem_name "${Le_Deploy_lighttpd_pem_name}" + elif [ -z "${Le_Deploy_lighttpd_pem_name}" ]; then + Le_Deploy_lighttpd_pem_name="${DEPLOY_LIGHTTPD_PEM_NAME_DEFAULT}" + fi + + # BUNDLE is optional. If not provided then assume "${DEPLOY_LIGHTTPD_BUNDLE_DEFAULT}" + _getdeployconf DEPLOY_LIGHTTPD_BUNDLE + _debug2 DEPLOY_LIGHTTPD_BUNDLE "${DEPLOY_LIGHTTPD_BUNDLE}" + if [ -n "${DEPLOY_LIGHTTPD_BUNDLE}" ]; then + Le_Deploy_lighttpd_bundle="${DEPLOY_LIGHTTPD_BUNDLE}" + _savedomainconf Le_Deploy_lighttpd_bundle "${Le_Deploy_lighttpd_bundle}" + elif [ -z "${Le_Deploy_lighttpd_bundle}" ]; then + Le_Deploy_lighttpd_bundle="${DEPLOY_LIGHTTPD_BUNDLE_DEFAULT}" + fi + + # ISSUER is optional. If not provided then assume "${DEPLOY_LIGHTTPD_ISSUER_DEFAULT}" + _getdeployconf DEPLOY_LIGHTTPD_ISSUER + _debug2 DEPLOY_LIGHTTPD_ISSUER "${DEPLOY_LIGHTTPD_ISSUER}" + if [ -n "${DEPLOY_LIGHTTPD_ISSUER}" ]; then + Le_Deploy_lighttpd_issuer="${DEPLOY_LIGHTTPD_ISSUER}" + _savedomainconf Le_Deploy_lighttpd_issuer "${Le_Deploy_lighttpd_issuer}" + elif [ -z "${Le_Deploy_lighttpd_issuer}" ]; then + Le_Deploy_lighttpd_issuer="${DEPLOY_LIGHTTPD_ISSUER_DEFAULT}" + fi + + # RELOAD is optional. If not provided then assume "${DEPLOY_LIGHTTPD_RELOAD_DEFAULT}" + _getdeployconf DEPLOY_LIGHTTPD_RELOAD + _debug2 DEPLOY_LIGHTTPD_RELOAD "${DEPLOY_LIGHTTPD_RELOAD}" + if [ -n "${DEPLOY_LIGHTTPD_RELOAD}" ]; then + Le_Deploy_lighttpd_reload="${DEPLOY_LIGHTTPD_RELOAD}" + _savedomainconf Le_Deploy_lighttpd_reload "${Le_Deploy_lighttpd_reload}" + elif [ -z "${Le_Deploy_lighttpd_reload}" ]; then + Le_Deploy_lighttpd_reload="${DEPLOY_LIGHTTPD_RELOAD_DEFAULT}" + fi + + # Set the suffix depending if we are creating a bundle or not + if [ "${Le_Deploy_lighttpd_bundle}" = "yes" ]; then + _info "Bundle creation requested" + # Initialise $Le_Keylength if its not already set + if [ -z "${Le_Keylength}" ]; then + Le_Keylength="" + fi + if _isEccKey "${Le_Keylength}"; then + _info "ECC key type detected" + _suffix=".ecdsa" + else + _info "RSA key type detected" + _suffix=".rsa" + fi + else + _suffix="" + fi + _debug _suffix "${_suffix}" + + # Set variables for later + _pem="${Le_Deploy_lighttpd_pem_path}/${Le_Deploy_lighttpd_pem_name}${_suffix}" + _issuer="${_pem}.issuer" + _ocsp="${_pem}.ocsp" + _reload="${Le_Deploy_lighttpd_reload}" + + _info "Deploying PEM file" + # Create a temporary PEM file + _temppem="$(_mktemp)" + _debug _temppem "${_temppem}" + cat "${_ckey}" "${_ccert}" "${_cca}" >"${_temppem}" + _ret="$?" + + # Check that we could create the temporary file + if [ "${_ret}" != "0" ]; then + _err "Error code ${_ret} returned during PEM file creation" + [ -f "${_temppem}" ] && rm -f "${_temppem}" + return ${_ret} + fi + + # Move PEM file into place + _info "Moving new certificate into place" + _debug _pem "${_pem}" + cat "${_temppem}" >"${_pem}" + _ret=$? + + # Clean up temp file + [ -f "${_temppem}" ] && rm -f "${_temppem}" + + # Deal with any failure of moving PEM file into place + if [ "${_ret}" != "0" ]; then + _err "Error code ${_ret} returned while moving new certificate into place" + return ${_ret} + fi + + # Update .issuer file if requested + if [ "${Le_Deploy_lighttpd_issuer}" = "yes" ]; then + _info "Updating .issuer file" + _debug _issuer "${_issuer}" + cat "${_cca}" >"${_issuer}" + _ret="$?" + + if [ "${_ret}" != "0" ]; then + _err "Error code ${_ret} returned while copying issuer/CA certificate into place" + return ${_ret} + fi + else + [ -f "${_issuer}" ] && _err "Issuer file update not requested but .issuer file exists" + fi + + # Update .ocsp file if certificate was requested with --ocsp/--ocsp-must-staple option + if [ -z "${Le_OCSP_Staple}" ]; then + Le_OCSP_Staple="0" + fi + if [ "${Le_OCSP_Staple}" = "1" ]; then + _info "Updating OCSP stapling info" + _debug _ocsp "${_ocsp}" + _info "Extracting OCSP URL" + _ocsp_url=$(${ACME_OPENSSL_BIN:-openssl} x509 -noout -ocsp_uri -in "${_pem}") + _debug _ocsp_url "${_ocsp_url}" + + # Only process OCSP if URL was present + if [ "${_ocsp_url}" != "" ]; then + # Extract the hostname from the OCSP URL + _info "Extracting OCSP URL" + _ocsp_host=$(echo "${_ocsp_url}" | cut -d/ -f3) + _debug _ocsp_host "${_ocsp_host}" + + # Only process the certificate if we have a .issuer file + if [ -r "${_issuer}" ]; then + # Check if issuer cert is also a root CA cert + _subjectdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -subject -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10) + _debug _subjectdn "${_subjectdn}" + _issuerdn=$(${ACME_OPENSSL_BIN:-openssl} x509 -in "${_issuer}" -issuer -noout | cut -d'/' -f2,3,4,5,6,7,8,9,10) + _debug _issuerdn "${_issuerdn}" + _info "Requesting OCSP response" + # If the issuer is a CA cert then our command line has "-CAfile" added + if [ "${_subjectdn}" = "${_issuerdn}" ]; then + _cafile_argument="-CAfile \"${_issuer}\"" + else + _cafile_argument="" + fi + _debug _cafile_argument "${_cafile_argument}" + # if OpenSSL/LibreSSL is v1.1 or above, the format for the -header option has changed + _openssl_version=$(${ACME_OPENSSL_BIN:-openssl} version | cut -d' ' -f2) + _debug _openssl_version "${_openssl_version}" + _openssl_major=$(echo "${_openssl_version}" | cut -d '.' -f1) + _openssl_minor=$(echo "${_openssl_version}" | cut -d '.' -f2) + if [ "${_openssl_major}" -eq "1" ] && [ "${_openssl_minor}" -ge "1" ] || [ "${_openssl_major}" -ge "2" ]; then + _header_sep="=" + else + _header_sep=" " + fi + # Request the OCSP response from the issuer and store it + _openssl_ocsp_cmd="${ACME_OPENSSL_BIN:-openssl} ocsp \ + -issuer \"${_issuer}\" \ + -cert \"${_pem}\" \ + -url \"${_ocsp_url}\" \ + -header Host${_header_sep}\"${_ocsp_host}\" \ + -respout \"${_ocsp}\" \ + -verify_other \"${_issuer}\" \ + ${_cafile_argument} \ + | grep -q \"${_pem}: good\"" + _debug _openssl_ocsp_cmd "${_openssl_ocsp_cmd}" + eval "${_openssl_ocsp_cmd}" + _ret=$? + else + # Non fatal: No issuer file was present so no OCSP stapling file created + _err "OCSP stapling in use but no .issuer file was present" + fi + else + # Non fatal: No OCSP url was found int the certificate + _err "OCSP update requested but no OCSP URL was found in certificate" + fi + + # Non fatal: Check return code of openssl command + if [ "${_ret}" != "0" ]; then + _err "Updating OCSP stapling failed with return code ${_ret}" + fi + else + # An OCSP file was already present but certificate did not have OCSP extension + if [ -f "${_ocsp}" ]; then + _err "OCSP was not requested but .ocsp file exists." + # Could remove the file at this step, although Lighttpd just ignores it in this case + # rm -f "${_ocsp}" || _err "Problem removing stale .ocsp file" + fi + fi + + # Reload Lighttpd + _debug _reload "${_reload}" + eval "${_reload}" + _ret=$? + if [ "${_ret}" != "0" ]; then + _err "Error code ${_ret} during reload" + return ${_ret} + else + _info "Reload successful" + fi + + return 0 +} diff --git a/deploy/ssh.sh b/deploy/ssh.sh index 18de4aa6..89962621 100644 --- a/deploy/ssh.sh +++ b/deploy/ssh.sh @@ -35,11 +35,6 @@ ssh_deploy() { _cfullchain="$5" _deploy_ssh_servers="" - if [ -f "$DOMAIN_CONF" ]; then - # shellcheck disable=SC1090 - . "$DOMAIN_CONF" - fi - _debug _cdomain "$_cdomain" _debug _ckey "$_ckey" _debug _ccert "$_ccert" @@ -47,6 +42,8 @@ ssh_deploy() { _debug _cfullchain "$_cfullchain" # USER is required to login by SSH to remote host. + _getdeployconf DEPLOY_SSH_USER + _debug2 DEPLOY_SSH_USER "$DEPLOY_SSH_USER" if [ -z "$DEPLOY_SSH_USER" ]; then if [ -z "$Le_Deploy_ssh_user" ]; then _err "DEPLOY_SSH_USER not defined." @@ -58,6 +55,8 @@ ssh_deploy() { fi # SERVER is optional. If not provided then use _cdomain + _getdeployconf DEPLOY_SSH_SERVER + _debug2 DEPLOY_SSH_SERVER "$DEPLOY_SSH_SERVER" if [ -n "$DEPLOY_SSH_SERVER" ]; then Le_Deploy_ssh_server="$DEPLOY_SSH_SERVER" _savedomainconf Le_Deploy_ssh_server "$Le_Deploy_ssh_server" @@ -66,6 +65,8 @@ ssh_deploy() { fi # CMD is optional. If not provided then use ssh + _getdeployconf DEPLOY_SSH_CMD + _debug2 DEPLOY_SSH_CMD "$DEPLOY_SSH_CMD" if [ -n "$DEPLOY_SSH_CMD" ]; then Le_Deploy_ssh_cmd="$DEPLOY_SSH_CMD" _savedomainconf Le_Deploy_ssh_cmd "$Le_Deploy_ssh_cmd" @@ -74,6 +75,8 @@ ssh_deploy() { fi # BACKUP is optional. If not provided then default to previously saved value or yes. + _getdeployconf DEPLOY_SSH_BACKUP + _debug2 DEPLOY_SSH_BACKUP "$DEPLOY_SSH_BACKUP" if [ "$DEPLOY_SSH_BACKUP" = "no" ]; then Le_Deploy_ssh_backup="no" elif [ -z "$Le_Deploy_ssh_backup" ] || [ "$DEPLOY_SSH_BACKUP" = "yes" ]; then @@ -82,6 +85,8 @@ ssh_deploy() { _savedomainconf Le_Deploy_ssh_backup "$Le_Deploy_ssh_backup" # BACKUP_PATH is optional. If not provided then default to previously saved value or .acme_ssh_deploy + _getdeployconf DEPLOY_SSH_BACKUP_PATH + _debug2 DEPLOY_SSH_BACKUP_PATH "$DEPLOY_SSH_BACKUP_PATH" if [ -n "$DEPLOY_SSH_BACKUP_PATH" ]; then Le_Deploy_ssh_backup_path="$DEPLOY_SSH_BACKUP_PATH" elif [ -z "$Le_Deploy_ssh_backup_path" ]; then @@ -91,6 +96,8 @@ ssh_deploy() { # MULTI_CALL is optional. If not provided then default to previously saved # value (which may be undefined... equivalent to "no"). + _getdeployconf DEPLOY_SSH_MULTI_CALL + _debug2 DEPLOY_SSH_MULTI_CALL "$DEPLOY_SSH_MULTI_CALL" if [ "$DEPLOY_SSH_MULTI_CALL" = "yes" ]; then Le_Deploy_ssh_multi_call="yes" _savedomainconf Le_Deploy_ssh_multi_call "$Le_Deploy_ssh_multi_call" @@ -141,6 +148,8 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d # KEYFILE is optional. # If provided then private key will be copied to provided filename. + _getdeployconf DEPLOY_SSH_KEYFILE + _debug2 DEPLOY_SSH_KEYFILE "$DEPLOY_SSH_KEYFILE" if [ -n "$DEPLOY_SSH_KEYFILE" ]; then Le_Deploy_ssh_keyfile="$DEPLOY_SSH_KEYFILE" _savedomainconf Le_Deploy_ssh_keyfile "$Le_Deploy_ssh_keyfile" @@ -163,6 +172,8 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d # CERTFILE is optional. # If provided then certificate will be copied or appended to provided filename. + _getdeployconf DEPLOY_SSH_CERTFILE + _debug2 DEPLOY_SSH_CERTFILE "$DEPLOY_SSH_CERTFILE" if [ -n "$DEPLOY_SSH_CERTFILE" ]; then Le_Deploy_ssh_certfile="$DEPLOY_SSH_CERTFILE" _savedomainconf Le_Deploy_ssh_certfile "$Le_Deploy_ssh_certfile" @@ -189,6 +200,8 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d # CAFILE is optional. # If provided then CA intermediate certificate will be copied or appended to provided filename. + _getdeployconf DEPLOY_SSH_CAFILE + _debug2 DEPLOY_SSH_CAFILE "$DEPLOY_SSH_CAFILE" if [ -n "$DEPLOY_SSH_CAFILE" ]; then Le_Deploy_ssh_cafile="$DEPLOY_SSH_CAFILE" _savedomainconf Le_Deploy_ssh_cafile "$Le_Deploy_ssh_cafile" @@ -216,6 +229,8 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d # FULLCHAIN is optional. # If provided then fullchain certificate will be copied or appended to provided filename. + _getdeployconf DEPLOY_SSH_FULLCHAIN + _debug2 DEPLOY_SSH_FULLCHAIN "$DEPLOY_SSH_FULLCHAIN" if [ -n "$DEPLOY_SSH_FULLCHAIN" ]; then Le_Deploy_ssh_fullchain="$DEPLOY_SSH_FULLCHAIN" _savedomainconf Le_Deploy_ssh_fullchain "$Le_Deploy_ssh_fullchain" @@ -244,6 +259,8 @@ then rm -rf \"\$fn\"; echo \"Backup \$fn deleted as older than 180 days\"; fi; d # REMOTE_CMD is optional. # If provided then this command will be executed on remote host. + _getdeployconf DEPLOY_SSH_REMOTE_CMD + _debug2 DEPLOY_SSH_REMOTE_CMD "$DEPLOY_SSH_REMOTE_CMD" if [ -n "$DEPLOY_SSH_REMOTE_CMD" ]; then Le_Deploy_ssh_remote_cmd="$DEPLOY_SSH_REMOTE_CMD" _savedomainconf Le_Deploy_ssh_remote_cmd "$Le_Deploy_ssh_remote_cmd" diff --git a/dnsapi/dns_1984hosting.sh b/dnsapi/dns_1984hosting.sh index 8fa6e06e..db0cbe15 100755 --- a/dnsapi/dns_1984hosting.sh +++ b/dnsapi/dns_1984hosting.sh @@ -46,7 +46,7 @@ dns_1984hosting_add() { postdata="entry=new" postdata="$postdata&type=TXT" - postdata="$postdata&ttl=3600" + postdata="$postdata&ttl=900" postdata="$postdata&zone=$_domain" postdata="$postdata&host=$_sub_domain" postdata="$postdata&rdata=%22$value%22" @@ -93,20 +93,15 @@ dns_1984hosting_rm() { fi _debug _sub_domain "$_sub_domain" _debug _domain "$_domain" - _debug "Delete $fulldomain TXT record" - url="https://management.1984hosting.com/domains" - _htmlget "$url" "$_domain" - _debug2 _response "$_response" - zone_id="$(echo "$_response" | _egrep_o 'zone\/[0-9]+')" - _debug2 zone_id "$zone_id" - if [ -z "$zone_id" ]; then - _err "Error getting zone_id for $1" + url="https://management.1984hosting.com/domains" + if ! _get_zone_id "$url" "$_domain"; then + _err "invalid zone" "$_domain" return 1 fi - _htmlget "$url/$zone_id" "$_sub_domain" + _htmlget "$url/$_zone_id" "$txtvalue" _debug2 _response "$_response" entry_id="$(echo "$_response" | _egrep_o 'entry_[0-9]+' | sed 's/entry_//')" _debug2 entry_id "$entry_id" @@ -135,7 +130,7 @@ dns_1984hosting_rm() { _1984hosting_login() { if ! _check_credentials; then return 1; fi - if _check_cookie; then + if _check_cookies; then _debug "Already logged in" return 0 fi @@ -150,9 +145,12 @@ _1984hosting_login() { _debug2 response "$response" if _contains "$response" '"loggedin": true'; then - One984HOSTING_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _tail_n 1 | _egrep_o 'sessionid=[^;]*;' | tr -d ';')" - export One984HOSTING_COOKIE - _saveaccountconf_mutable One984HOSTING_COOKIE "$One984HOSTING_COOKIE" + One984HOSTING_SESSIONID_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'sessionid=[^;]*;' | tr -d ';')" + One984HOSTING_CSRFTOKEN_COOKIE="$(grep -i '^set-cookie:' "$HTTP_HEADER" | _egrep_o 'csrftoken=[^;]*;' | tr -d ';')" + export One984HOSTING_SESSIONID_COOKIE + export One984HOSTING_CSRFTOKEN_COOKIE + _saveaccountconf_mutable One984HOSTING_SESSIONID_COOKIE "$One984HOSTING_SESSIONID_COOKIE" + _saveaccountconf_mutable One984HOSTING_CSRFTOKEN_COOKIE "$One984HOSTING_CSRFTOKEN_COOKIE" return 0 fi return 1 @@ -169,21 +167,24 @@ _check_credentials() { return 0 } -_check_cookie() { - One984HOSTING_COOKIE="${One984HOSTING_COOKIE:-$(_readaccountconf_mutable One984HOSTING_COOKIE)}" - if [ -z "$One984HOSTING_COOKIE" ]; then - _debug "No cached cookie found" +_check_cookies() { + One984HOSTING_SESSIONID_COOKIE="${One984HOSTING_SESSIONID_COOKIE:-$(_readaccountconf_mutable One984HOSTING_SESSIONID_COOKIE)}" + One984HOSTING_CSRFTOKEN_COOKIE="${One984HOSTING_CSRFTOKEN_COOKIE:-$(_readaccountconf_mutable One984HOSTING_CSRFTOKEN_COOKIE)}" + if [ -z "$One984HOSTING_SESSIONID_COOKIE" ] || [ -z "$One984HOSTING_CSRFTOKEN_COOKIE" ]; then + _debug "No cached cookie(s) found" return 1 fi _authget "https://management.1984hosting.com/accounts/loginstatus/" if _contains "$response" '"ok": true'; then - _debug "Cached cookie still valid" + _debug "Cached cookies still valid" return 0 fi - _debug "Cached cookie no longer valid" - One984HOSTING_COOKIE="" - _saveaccountconf_mutable One984HOSTING_COOKIE "$One984HOSTING_COOKIE" + _debug "Cached cookies no longer valid" + One984HOSTING_SESSIONID_COOKIE="" + One984HOSTING_CSRFTOKEN_COOKIE="" + _saveaccountconf_mutable One984HOSTING_SESSIONID_COOKIE "$One984HOSTING_SESSIONID_COOKIE" + _saveaccountconf_mutable One984HOSTING_CSRFTOKEN_COOKIE "$One984HOSTING_CSRFTOKEN_COOKIE" return 1 } @@ -215,9 +216,25 @@ _get_root() { return 1 } +#usage: _get_zone_id url domain.com +#returns zone id for domain.com +_get_zone_id() { + url=$1 + domain=$2 + _htmlget "$url" "$domain" + _debug2 _response "$_response" + _zone_id="$(echo "$_response" | _egrep_o 'zone\/[0-9]+' | _head_n 1)" + _debug2 _zone_id "$_zone_id" + if [ -z "$_zone_id" ]; then + _err "Error getting _zone_id for $2" + return 1 + fi + return 0 +} + # add extra headers to request _authget() { - export _H1="Cookie: $One984HOSTING_COOKIE" + export _H1="Cookie: $One984HOSTING_CSRFTOKEN_COOKIE;$One984HOSTING_SESSIONID_COOKIE" _response=$(_get "$1" | _normalizeJson) _debug2 _response "$_response" } @@ -225,12 +242,20 @@ _authget() { # truncate huge HTML response # echo: Argument list too long _htmlget() { - export _H1="Cookie: $One984HOSTING_COOKIE" - _response=$(_get "$1" | grep "$2" | _head_n 1) + export _H1="Cookie: $One984HOSTING_CSRFTOKEN_COOKIE;$One984HOSTING_SESSIONID_COOKIE" + _response=$(_get "$1" | grep "$2") + if _contains "$_response" "@$2"; then + _response=$(echo "$_response" | grep -v "[@]" | _head_n 1) + fi } # add extra headers to request _authpost() { - export _H1="Cookie: $One984HOSTING_COOKIE" + url="https://management.1984hosting.com/domains" + _get_zone_id "$url" "$_domain" + csrf_header="$(echo "$One984HOSTING_CSRFTOKEN_COOKIE" | _egrep_o "=[^=][0-9a-zA-Z]*" | tr -d "=")" + export _H1="Cookie: $One984HOSTING_CSRFTOKEN_COOKIE;$One984HOSTING_SESSIONID_COOKIE" + export _H2="Referer: https://management.1984hosting.com/domains/$_zone_id" + export _H3="X-CSRFToken: $csrf_header" _response=$(_post "$1" "$2") } diff --git a/dnsapi/dns_cpanel.sh b/dnsapi/dns_cpanel.sh new file mode 100755 index 00000000..f91725a4 --- /dev/null +++ b/dnsapi/dns_cpanel.sh @@ -0,0 +1,159 @@ +#!/usr/bin/env sh +# +#Author: Bjarne Saltbaek +#Report Bugs here: https://github.com/acmesh-official/acme.sh/issues/3732 +# +# +######## Public functions ##################### +# +# Export CPANEL username,api token and hostname in the following variables +# +# cPanel_Username=username +# cPanel_Apitoken=apitoken +# cPanel_Hostname=hostname +# +# Usage: add _acme-challenge.www.domain.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs" +# Used to add txt record +dns_cpanel_add() { + fulldomain=$1 + txtvalue=$2 + + _info "Adding TXT record to cPanel based system" + _debug fulldomain "$fulldomain" + _debug txtvalue "$txtvalue" + _debug cPanel_Username "$cPanel_Username" + _debug cPanel_Apitoken "$cPanel_Apitoken" + _debug cPanel_Hostname "$cPanel_Hostname" + + if ! _cpanel_login; then + _err "cPanel Login failed for user $cPanel_Username. Check $HTTP_HEADER file" + return 1 + fi + + _debug "First detect the root zone" + if ! _get_root "$fulldomain"; then + _err "No matching root domain for $fulldomain found" + return 1 + fi + # adding entry + _info "Adding the entry" + stripped_fulldomain=$(echo "$fulldomain" | sed "s/.$_domain//") + _debug "Adding $stripped_fulldomain to $_domain zone" + _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=add_zone_record&domain=$_domain&name=$stripped_fulldomain&type=TXT&txtdata=$txtvalue&ttl=1" + if _successful_update; then return 0; fi + _err "Couldn't create entry!" + return 1 +} + +# Usage: fulldomain txtvalue +# Used to remove the txt record after validation +dns_cpanel_rm() { + fulldomain=$1 + txtvalue=$2 + + _info "Using cPanel based system" + _debug fulldomain "$fulldomain" + _debug txtvalue "$txtvalue" + + if ! _cpanel_login; then + _err "cPanel Login failed for user $cPanel_Username. Check $HTTP_HEADER file" + return 1 + fi + + if ! _get_root; then + _err "No matching root domain for $fulldomain found" + return 1 + fi + + _findentry "$fulldomain" "$txtvalue" + if [ -z "$_id" ]; then + _info "Entry doesn't exist, nothing to delete" + return 0 + fi + _debug "Deleting record..." + _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=remove_zone_record&domain=$_domain&line=$_id" + # removing entry + _debug "_result is: $_result" + + if _successful_update; then return 0; fi + _err "Couldn't delete entry!" + return 1 +} + +#################### Private functions below ################################## + +_checkcredentials() { + cPanel_Username="${cPanel_Username:-$(_readaccountconf_mutable cPanel_Username)}" + cPanel_Apitoken="${cPanel_Apitoken:-$(_readaccountconf_mutable cPanel_Apitoken)}" + cPanel_Hostname="${cPanel_Hostname:-$(_readaccountconf_mutable cPanel_Hostname)}" + + if [ -z "$cPanel_Username" ] || [ -z "$cPanel_Apitoken" ] || [ -z "$cPanel_Hostname" ]; then + cPanel_Username="" + cPanel_Apitoken="" + cPanel_Hostname="" + _err "You haven't specified cPanel username, apitoken and hostname yet." + _err "Please add credentials and try again." + return 1 + fi + #save the credentials to the account conf file. + _saveaccountconf_mutable cPanel_Username "$cPanel_Username" + _saveaccountconf_mutable cPanel_Apitoken "$cPanel_Apitoken" + _saveaccountconf_mutable cPanel_Hostname "$cPanel_Hostname" + return 0 +} + +_cpanel_login() { + if ! _checkcredentials; then return 1; fi + + if ! _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=CustInfo&cpanel_jsonapi_func=displaycontactinfo"; then + _err "cPanel login failed for user $cPanel_Username." + return 1 + fi + return 0 +} + +_myget() { + #Adds auth header to request + export _H1="Authorization: cpanel $cPanel_Username:$cPanel_Apitoken" + _result=$(_get "$cPanel_Hostname/$1") +} + +_get_root() { + _myget 'json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=fetchzones' + _domains=$(echo "$_result" | sed 's/.*\(zones.*\[\).*/\1/' | cut -d':' -f2 | sed 's/"//g' | sed 's/{//g') + _debug "_result is: $_result" + _debug "_domains is: $_domains" + if [ -z "$_domains" ]; then + _err "Primary domain list not found!" + return 1 + fi + for _domain in $_domains; do + _debug "Checking if $fulldomain ends with $_domain" + if (_endswith "$fulldomain" "$_domain"); then + _debug "Root domain: $_domain" + return 0 + fi + done + return 1 +} + +_successful_update() { + if (echo "$_result" | grep -q 'newserial'); then return 0; fi + return 1 +} + +_findentry() { + _debug "In _findentry" + #returns id of dns entry, if it exists + _myget "json-api/cpanel?cpanel_jsonapi_apiversion=2&cpanel_jsonapi_module=ZoneEdit&cpanel_jsonapi_func=fetchzone_records&domain=$_domain" + _id=$(echo "$_result" | sed "s/.*\(line.*$fulldomain.*$txtvalue\).*/\1/" | cut -d ':' -f 2 | cut -d ',' -f 1) + _debug "_result is: $_result" + _debug "fulldomain. is $fulldomain." + _debug "txtvalue is $txtvalue" + _debug "_id is: $_id" + if [ -n "$_id" ]; then + _debug "Entry found with _id=$_id" + return 0 + fi + return 1 +} diff --git a/dnsapi/dns_he.sh b/dnsapi/dns_he.sh index ef09fa0a..bf4a5030 100755 --- a/dnsapi/dns_he.sh +++ b/dnsapi/dns_he.sh @@ -85,7 +85,7 @@ dns_he_rm() { _debug "The txt record is not found, just skip" return 0 fi - _record_id="$(echo "$response" | tr -d "#" | sed "s//dev/null; then # Response looks like: - # {"ttl":300,"accountId":12345,"id":1111111,"name":"example.com","emailAddress": ... - _domain_id=$(echo "$response" | sed -n "s/^.*\"id\":\([^,]*\),\"name\":\"$h\",.*/\1/p") + # {"id":"12345","accountId":"1111111","name": "example.com","ttl":3600,"emailAddress": ... + _domain_id=$(echo "$response" | sed -n "s/^.*\"id\":\"\([^,]*\)\",\"accountId\":\"[0-9]*\",\"name\":\"$h\",.*/\1/p") _debug2 domain_id "$_domain_id" if [ -n "$_domain_id" ]; then _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p) diff --git a/dnsapi/dns_veesp.sh b/dnsapi/dns_veesp.sh new file mode 100644 index 00000000..b8a41d00 --- /dev/null +++ b/dnsapi/dns_veesp.sh @@ -0,0 +1,158 @@ +#!/usr/bin/env sh + +# bug reports to stepan@plyask.in + +# +# export VEESP_User="username" +# export VEESP_Password="password" + +VEESP_Api="https://secure.veesp.com/api" + +######## Public functions ##################### + +#Usage: add _acme-challenge.www.domain.com "XKrxpRBosdIKFzxW_CT3KLZNf6q0HG9i01zxXp5CPBs" +dns_veesp_add() { + fulldomain=$1 + txtvalue=$2 + + VEESP_Password="${VEESP_Password:-$(_readaccountconf_mutable VEESP_Password)}" + VEESP_User="${VEESP_User:-$(_readaccountconf_mutable VEESP_User)}" + VEESP_auth=$(printf "%s" "$VEESP_User:$VEESP_Password" | _base64) + + if [ -z "$VEESP_Password" ] || [ -z "$VEESP_User" ]; then + VEESP_Password="" + VEESP_User="" + _err "You don't specify veesp api key and email yet." + _err "Please create you key and try again." + return 1 + fi + + #save the api key and email to the account conf file. + _saveaccountconf_mutable VEESP_Password "$VEESP_Password" + _saveaccountconf_mutable VEESP_User "$VEESP_User" + + _debug "First detect the root zone" + if ! _get_root "$fulldomain"; then + _err "invalid domain" + return 1 + fi + _debug _domain_id "$_domain_id" + _debug _sub_domain "$_sub_domain" + _debug _domain "$_domain" + + _info "Adding record" + if VEESP_rest POST "service/$_service_id/dns/$_domain_id/records" "{\"name\":\"$fulldomain\",\"ttl\":1,\"priority\":0,\"type\":\"TXT\",\"content\":\"$txtvalue\"}"; then + if _contains "$response" "\"success\":true"; then + _info "Added" + #todo: check if the record takes effect + return 0 + else + _err "Add txt record error." + return 1 + fi + fi +} + +# Usage: fulldomain txtvalue +# Used to remove the txt record after validation +dns_veesp_rm() { + fulldomain=$1 + txtvalue=$2 + + VEESP_Password="${VEESP_Password:-$(_readaccountconf_mutable VEESP_Password)}" + VEESP_User="${VEESP_User:-$(_readaccountconf_mutable VEESP_User)}" + VEESP_auth=$(printf "%s" "$VEESP_User:$VEESP_Password" | _base64) + + _debug "First detect the root zone" + if ! _get_root "$fulldomain"; then + _err "invalid domain" + return 1 + fi + _debug _domain_id "$_domain_id" + _debug _sub_domain "$_sub_domain" + _debug _domain "$_domain" + + _debug "Getting txt records" + VEESP_rest GET "service/$_service_id/dns/$_domain_id" + + count=$(printf "%s\n" "$response" | _egrep_o "\"type\":\"TXT\",\"content\":\".\"$txtvalue.\"\"" | wc -l | tr -d " ") + _debug count "$count" + if [ "$count" = "0" ]; then + _info "Don't need to remove." + else + record_id=$(printf "%s\n" "$response" | _egrep_o "{\"id\":[^}]*\"type\":\"TXT\",\"content\":\".\"$txtvalue.\"\"" | cut -d\" -f4) + _debug "record_id" "$record_id" + if [ -z "$record_id" ]; then + _err "Can not get record id to remove." + return 1 + fi + if ! VEESP_rest DELETE "service/$_service_id/dns/$_domain_id/records/$record_id"; then + _err "Delete record error." + return 1 + fi + _contains "$response" "\"success\":true" + fi +} + +#################### Private functions below ################################## +#_acme-challenge.www.domain.com +#returns +# _sub_domain=_acme-challenge.www +# _domain=domain.com +# _domain_id=sdjkglgdfewsdfg +_get_root() { + domain=$1 + i=2 + p=1 + if ! VEESP_rest GET "dns"; then + return 1 + fi + while true; do + h=$(printf "%s" "$domain" | cut -d . -f $i-100) + _debug h "$h" + if [ -z "$h" ]; then + #not valid + return 1 + fi + + if _contains "$response" "\"name\":\"$h\""; then + _domain_id=$(printf "%s\n" "$response" | _egrep_o "\"domain_id\":[^,]*,\"name\":\"$h\"" | cut -d : -f 2 | cut -d , -f 1 | cut -d '"' -f 2) + _debug _domain_id "$_domain_id" + _service_id=$(printf "%s\n" "$response" | _egrep_o "\"name\":\"$h\",\"service_id\":[^}]*" | cut -d : -f 3 | cut -d '"' -f 2) + _debug _service_id "$_service_id" + if [ "$_domain_id" ]; then + _sub_domain=$(printf "%s" "$domain" | cut -d . -f 1-$p) + _domain="$h" + return 0 + fi + return 1 + fi + p=$i + i=$(_math "$i" + 1) + done + return 1 +} + +VEESP_rest() { + m=$1 + ep="$2" + data="$3" + _debug "$ep" + + export _H1="Accept: application/json" + export _H2="Authorization: Basic $VEESP_auth" + if [ "$m" != "GET" ]; then + _debug data "$data" + export _H3="Content-Type: application/json" + response="$(_post "$data" "$VEESP_Api/$ep" "" "$m")" + else + response="$(_get "$VEESP_Api/$ep")" + fi + + if [ "$?" != "0" ]; then + _err "error $ep" + return 1 + fi + _debug2 response "$response" + return 0 +} diff --git a/notify/pushbullet.sh b/notify/pushbullet.sh new file mode 100644 index 00000000..ca997c84 --- /dev/null +++ b/notify/pushbullet.sh @@ -0,0 +1,44 @@ +#!/usr/bin/env sh + +#Support for pushbullet.com's api. Push notification, notification sync and message platform for multiple platforms +#PUSHBULLET_TOKEN="" Required, pushbullet application token +#PUSHBULLET_DEVICE="" Optional, Specific device, ignore to send to all devices + +PUSHBULLET_URI="https://api.pushbullet.com/v2/pushes" +pushbullet_send() { + _subject="$1" + _content="$2" + _statusCode="$3" #0: success, 1: error 2($RENEW_SKIP): skipped + _debug "_statusCode" "$_statusCode" + + PUSHBULLET_TOKEN="${PUSHBULLET_TOKEN:-$(_readaccountconf_mutable PUSHBULLET_TOKEN)}" + if [ -z "$PUSHBULLET_TOKEN" ]; then + PUSHBULLET_TOKEN="" + _err "You didn't specify a Pushbullet application token yet." + return 1 + fi + _saveaccountconf_mutable PUSHBULLET_TOKEN "$PUSHBULLET_TOKEN" + + PUSHBULLET_DEVICE="${PUSHBULLET_DEVICE:-$(_readaccountconf_mutable PUSHBULLET_DEVICE)}" + if [ -z "$PUSHBULLET_DEVICE" ]; then + _clearaccountconf_mutable PUSHBULLET_DEVICE + else + _saveaccountconf_mutable PUSHBULLET_DEVICE "$PUSHBULLET_DEVICE" + fi + + export _H1="Content-Type: application/json" + export _H2="Access-Token: ${PUSHBULLET_TOKEN}" + _content="$(printf "*%s*\n" "$_content" | _json_encode)" + _subject="$(printf "*%s*\n" "$_subject" | _json_encode)" + _data="{\"type\": \"note\",\"title\": \"${_subject}\",\"body\": \"${_content}\",\"device_iden\": \"${PUSHBULLET_DEVICE}\"}" + response="$(_post "$_data" "$PUSHBULLET_URI")" + + if [ "$?" != "0" ] || _contains "$response" "\"error_code\""; then + _err "PUSHBULLET send error." + _err "$response" + return 1 + fi + + _info "PUSHBULLET send success." + return 0 +}